Is always required OS to create a guest virtual machine?

Similar Questions

• Restructuring of the pagefile to the guest virtual machines

  Is there a directive to rigtsize the pagefile for guest virtual machines (Windows)?

  With the hosted versions of VMware (Workstation and Server), I used to create a swap file whose size was RAM * 2 and place it on a different disk from the system disk / boot: can it be good for VMware ESXi as weel?

  Is there a better solution?

  Concerning

  Marius

  that will depend entirely on the Organization of the underlying hardware and the OS and app loading on these drives.  Having said that, generally, is not a big deal provided that machines have anyway enough RAM.

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• VMware workstation, crashes when I try to create a new virtual machine

  Hello

  I never had this problem before, but I didn't create a new virtual machine in a very long time. Last time I created one was making Workstation 9 I think. Some time after the upgrade to Workstation 10 or 8.1 of Windows Update 1 it has started.

  In 10 Workstation running on Windows 8.1, I select the file > new Virtual Machine dialog coming upwards and in a few seconds crashes of VMware workstation and closes.

  So I checked the Windows event logs and find

  Warning "VMware Workstation to function properly, must be reinstalled after the upgrade to Windows."

  So, I upgraded from 10.0.2 to 10.0.3 and it uninstalled and reinstalled but I still get this warning.

  Followed by an error

  ***

  Journal name:	Application
  Source:	Application error
  Date:	15/08/2014 23:33:53
  Event ID:	1000

  Task category: (100)

  Level:	Error
  Keywords:	Classic
  User:	N/A
  Computer:	P7Win8MC

  Description:

  Name of the failing application: vmware.exe, version: 10.0.3.48389, time stamp: 0x539a4fb0

  Name of the failed module: MSVCR90.dll, version: 9.0.30729.8387, time stamp: 0x51ea24a5

  Exception code: 0xc0000005

  Offset: 0x0003bece

  ID of the process failed: 0 x 1788

  Start time of application vulnerabilities: 0x01cfb902de541c11

  The failing application path: C:\Program Files (x 86) \VMware\VMware Workstation\vmware.exe

  Path of the failing module: C:\WINDOWS\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.8387_none_5094ca96bcb6b2bb\MSVCR90.dll

  Report ID: 24d5effb-24f6-11e4-bedd-20cf30780548

  ***

  So I need help to track down what I am not sure what VMware paper to look to maybe see what is happening.

  Thank you

  Rainey

  Well, I found the problem.

  I looked in the UNK file and found a few ISO files wrongs tracks.

  I had mounted some ISO in the past and they have made the entry in this file of preferences such as "isoLocationMRUx".

  I'd change the leter this ISO file player so they could not be found as input, once I corrected the paths I can now create a new virtual machine.

  He is responsible for ion BONE the new virtual machine now.

• Upgrade to ESXi 5.0 to 5.1 - No Hardware 9 option available when creating a new virtual machine

  Greetings,

  I improved my esxi U1 5.0 to 5.1 and attempted to create a new virtual machine in hopes of using the new version of material 9.

  Using the standard and Custom options I been unable to create a Version 9 hardware VM by default.

  The only option I had was manually upgrade to version 9 once the virtual machine was created.

  Any thought or is - this as planned? I need to reinstall from scratch, my host?

  dhayashi

  To create virtual machines with HW version 9, you can use the Web Client, rather than the windows based Client vSphere.

  André

• create a new virtual machine with the default settings?

  I was wondering if there was a way to create a new virtual machine with the default settings.

  For example, let's say I want all new Lion VM to have 2 CPU cores. Is there a way to set this automatically? There are other parameters I want a new machine to inherit automatically, I was wondering if there is an automatic way to do this, or is it a feature request...

  Thanks in advance

  lerker wrote:

  Just for my clarification, when you say a vm model, basically I would execute a finder copy then drag back to the VM library, right?

  Yes.

  On the orders of spcirpting, it would be unix commands or are there specific vmware controls that make your job easier (in Applications/VMware\ Fusion/content or elsewhere)...

  IIRC, VMware Fusion 3 and later versions has an AppleScript dictionary, but it is not yet officially supported and may not be able to do what you want so, basically, only Unix Shell scripts, that's what I was referring to.  For an example, see my script attached to the following response: Re: vmware - script of the creation of the vm and the operating system installation process

• Could not create the Java virtual machine

  Hello

  I am using VM ware and installed Linux operating system.

  In my MedRecDomain of Weblogic Admin Server to start and also to start MedRecSvr1.

  But MedRecSvr2 & 3 do not stand up.

  Details:

  OS: Linux

  Details of the JVM: JAVA memory arguments: -Xms512m-Xmx512m

  WebLogic Version: 10.3.6

  Please see the Journal as shown below,

  [root@ram bin] #./startManagedWebLogic.sh MedRecSvr2 &

  [1] 3194

  [root@ram bin] #.

  .

  Arguments of memory in JAVA:-Xms512m-Xmx512m

  .

  Start mode of WLS = Production

  .

  CLASSPATH=/opt/labs/ows/wlshome/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/labs/ows/wlshome/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/labs/ows/wlshome/jrockit_160_29_D1.2.0-10/lib/tools.jar:/opt/labs/ows/wlshome/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/labs/ows/wlshome/wlserver_10.3/server/lib/weblogic.jar:/opt/labs/ows/wlshome/modules/features/weblogic.server.modules_10.3.6.0.jar:/opt/labs/ows/wlshome/wlserver_10.3/server/lib/webservices.jar:/opt/labs/ows/wlshome/modules/org.apache.ant_ 1.7.1/lib/ant-all.jar:/opt/labs/ows/wlshome/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/labs/ows/wlshome/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/labs/ows/wlshome/wlserver_10.3/server/lib/xqrl.jar

  .

  PATH=/opt/labs/ows/wlshome/wlserver_10.3/server/bin:/opt/labs/ows/wlshome/modules/org.apache.ant_1.7.1/bin:/opt/labs/ows/wlshome/jrockit_160_29_D1.2.0-10/jre/bin:/opt/labs/ows/wlshome/jrockit_160_29_D1.2.0-10/bin:/usr/lib/qt-3.3/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/root/bin

  .

  ***************************************************

  * To start WebLogic Server, use a username and *.

  * password assigned to an administrator-level user.  For *.

  * server administration, using the WebLogic Server *.

  * console in http://hostname/ReportServer: port/console         *

  ***************************************************

  from weblogic with the Java version:

  Java version "1.6.0_29".

  Java (TM) SE Runtime Environment (build 1.6.0_29 - b11)

  Oracle JRockit (R) (build R28.2.0-79-146777-1.6.0_29-20111005-1807-linux-ia32, update mode)

  WLS starting with line:

  /opt/labs/ows/wlshome/jrockit_160_29_D1.2.0-10/bin/java - jrockit-Xms512m-Xmx512m-Dweblogic.Name=MedRecSvr2-Djava.security.policy=/opt/labs/ows/wlshome/wlserver_10.3/server/lib/weblogic.policy-Dweblogic.ProductionModeEnabled=true-Dweblogic.security.SSL.trustedCAKeyStore=/opt/labs/ows/wlshome/wlserver_10.3/server/lib/cacerts-da-Dplatform.home=/opt/labs/ows/wlshome/wlserver_10.3-Dwls.home=/opt/labs/ows/wlshome/wlserver_10.3/server-Dweblogic.home=/opt/labs/ows/wlshome/wlserver_10.3/server-Dweblogic.management.discover=false-Dweblogic.management.server= http://10.0.2.15:7020 -Dwlw.iterativeDev=false-Dwlw.testConsole=false-Dwlw.logErrorsToConsole=false-Dweblogic.ext.dirs=/opt/labs/ows/wlshome/patch_wls1036/profiles/default/sysext_manifest_classpath:/opt/labs/ows/wlshome/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic. Server

  [ERROR] [memory] Could not commit 524288 KB memory heap at 0x95e09000.

  Could not create the Java virtual machine.

  
  

  Also, when the managed server stop also get the same question,

  [root@ram bin] #./stopManagedWebLogic.sh MedRecSvr2

  If you stop Weblogic Server...

  [ERROR] [memory] Could not commit 524288 KB memory heap at 0x95e09000.

  Could not create the Java virtual machine.

  Fact

  Stopping Server Derby...

  Derby server stopped.

  [root@ram ~] # cat/proc/meminfo

  MemTotal: 511620 kB

  MemFree: 5224 kB

  Stamps: 760 kB

  Caching: 20440 kB

  SwapCached: 109492 kB

  Active principles: 219424 kB

  Inactive: 220788 kB

  Active (Anon): 210272 kB

  Inactive (Anon): 210408 kB

  Active (leader): 9152 kB

  Inactive (queue): 10380 kB

  Unevictable: 0 kB

  Mlocked: 0 kB

  HighTotal: 0 kB

  HighFree: 0 kB

  LowTotal: 511620 kB

  LowFree: 5224 kB

  SwapTotal: 1048568 kB

  SwapFree: 1516 KB

  Sale: 12 KB

  Writeback: 512 KB

  AnonPages: 309740 kB

  Mapped: 12684 kB

  Shmem: 1628 kB

  Slab: 48500 kB

  SReclaimable: 12196 kB

  SUnreclaim: 36304 kB

  KernelStack: 2656 kB

  PageTables: 9104 kB

  NFS_Unstable: 0 kB

  Bounce: 0 kB

  WritebackTmp: 0 kB

  CommitLimit: 1304376 kB

  Committed_AS: 2210364 kB

  VmallocTotal: 505912 kB

  VmallocUsed: 5196 kB

  VmallocChunk: 486476 kB

  HugePages_Total: 0

  HugePages_Free: 0

  HugePages_Rsvd: 0

  HugePages_Surp: 0

  Hugepagesize: 2048 kB

  DirectMap4k: 6080 kB

  DirectMap2M: 518144 kB

  Please help identify the problem.

  Thnks in advance

  Kind regards

  Bouchra Arun

  Web Site: http://www.industryvertical.co.in/

  People,

  This issue has been resolved,

  Details of the problem:

  RAM 512 MB only, use JVM parameters

  "" Arguments of memory in JAVA: -Xms512m-Xmx512m ".

  If WL struck to use more memory for the start and the stop MedRecSvr2, 3 (managed server)

  Please read the following steps to correct,

  1. open Oracle VM Virtual box

  2. go to settings and select the system option (make sure that all OS turns off).

  3. go in card mother in this window select Base memory previously is changed to 1920 MB (1.875 GB) 512 MB.

  4. click on Ok.

  Then the allocated RAM will be more, for Weblogic doesn't get knocked because of insufficient RAM memory.

  
  

  Respect,

  Bouchra Arun

  Portrait of the industry

  Please Mark Helpful / good answer

• How to specify the file of virtual hard disk when you create a new virtual machine using virtual hard disk on the data store?

  I'm new to PowerCLI and find quite simple, but in the documentation I read, I don't see how to use a virtual hard drive, existing on a data store when you create a new virtual machine.

  Is this simple registration on the virtual hard disk, or did I miss something?

  My current create VM is the following statement:

  New-VM

  -Name $TargetHostName -host $TargetVMCenterHost -data store $TargetVMCenterDatastore DiskMB - 20000 -MemoryMB $TargetHostMemoryMB -NumCPU $TargetHostCPUs -ID $TargetHostOS -CD -Description $TargetHostName

  Didn't notice this before, but I think that vSphere will use a backslash instead of a slash in the paths.

• Create the new virtual machine using Java API vCloud

  Hi guys,.

  I am trying to create the new virtual machine in TIME, but I've stuck here. The API I'm using is vcloud-java-sdk - 1.0.jar.

  Could you please show me a code snippet how to do this?

  For now I do it like this:

  RecomposeVAppParamsType recomposeVAppParamsType = new RecomposeVAppParamsType();

  List the items < CompositionItemParamType > = recomposeVAppParamsType.getItem ();
  ReferenceType vappTemplateVMRef = new ReferenceType();

  // ??? seems that new reference to the new virtual machine should be here. But how to create this VM
  CompositionItemParamType compositionItemParamType = new CompositionItemParamType();
  compositionItemParamType.setSource (vappTemplateVMRef);

  Items.Add (compositionItemParamType);
  ReferenceType vAppRef is Vdc.getVdcByReference (vcloudClient, vdcRef) .getVappRefByName ("vApp_Websrv");.

  Vapp.getVappByReference (vcloudClient, vAppRef) .recomposeVapp (recomposeVAppParamsType);

  One day before I played with Web Services SDK, which is much easier to understand. I was able to create the vApp and VMs in vSphere. Is it possible to import machines virtual vSphere to vCloud? Should what API I use for this?

  Thank you

  Hello

  You cannot add a new empty virtual machine in a paralytic.

  Instead, you can add a virtual machine from an existing vapp, vapptemplate.

  To import a vsphere vm to vcloud.

  Import vsphere vm as VAPP in vcloud. VMWVimserver-> importVmAsVApp()

  The importation of vsphere vm, as vAppTemplate, in vcloud. VMWVimserver-> importVmAsVAppTemplate()

  See also the example of ImportVmAsvAppTemplate.java, which is part of the vcloudjavasdk group.

  Kind regards

  Rajesh Kamal.

• Syntax to create a new virtual machine using vCLI

  I use few of ESX 3.5 servers and a server vCenter 2.5 in my lab. I installed vCLI in vCenter server. I would like to know the command to create a new virtual machine through the vCLI. Use of the below details to provide the syntax / command.

  • Name of VM - windows2003
  • CPU - 2
  • Memory - 2096 MB
  • Name of ESX - esxserver1
  • Storage - disk 30 GB C and 40 GB D drive (these two must be placed in a storage centralized. i.e., data store name is - "filer1.lun123"

  Expecting more details.

  Thank you

  Ganesh

  VCLI orders are mainly used for configurations of the host, although as part of the installation of vCLI, you get also vSphere SDK for utilities Perl - http://www.vmware.com/support/developer/viperltoolkit/viperl41/doc/vsperl_util_index.html that provide additional canned scripts, which allows you to create a single set of virtual machines using the vmcreate.pl script. There is an example on how to use a script

• Install ESX 2.5.5 - installs require licensing to allow power on virtual machines?

  Install ESX 2.5.5 - installs require licensing to allow power on virtual machines?

  I am part of an exercise in DR for ESX 2.5 installation. If ESX 2.5 requires serial numbers on install to allow power on virtual machines?

  Or does the time where the vms turn on for the trial period?

  The doc of admin ESX 2.5 says that he must have licenses in order to on the VMs.

  Can the production ESX 2.5 serial numbers be used for the exercise of the DR, or is related to the material serial number. (I think it could be used).

  All points will be awarded.

  Thxs

  VMware, even in the early days has provided a 60-day evaluation license - worth ESX 2.x and VC 1.x - the same limitations that apply today apply to the ESX 2.x, once that period eval runs out - you will not be able to on the VMs.

  licenses are not related to the material. -.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• HDD USB not recognized as "physical1" when creating the new virtual machine

  Hi all

  I wanted to create a new virtual machine, and I wanted to use my USB as a physical drive.

  But Workstation shows me "physical0" which is of course my drive internal.

  I tried USB pen drives. They are not recognized either.

  This somehow is no longer supported? I would have that it would be possible to use USB external HDD as the physical drive to a new virtual machine.

  you have installed VirtualBox?

  If so, you can try to use the virtuaklbox command line tool to create a descriptor of rawdisk for this disc.

  say diskpart on this drive? -It is "online"?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• create the new virtual machine, access to a physical disk

  I just created a new virtual machine. Then, I deleted the preconfigured disk and added a physical disk. This drive is connected to my computer with an S - ATA to USB docking station. The wizard displays all of the data, were leaving and so on correctly. But when I try to turn on the virtual machine, it tells me that it cannot access the drive.

  What I am doing wrong?

  I use Windows 7 64-bit with VMware Player 3.

  http://communities.VMware.com/docs/doc-10455

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Error during communication with the remote host when you create the new virtual machine

  I'm under 7 ESX servers on IBM Blade H22 there is a mistake to invite while I create a new virtual machine

  on the vcenter Server

  At the end of 30-35 minutes, it gives an error

  "Error during communication with the remote host"

  The existing machines are working well... I tried to create virtual machines to other ESX servers as well

  but the same question. I also tried to make the clone of existing machines, but without success

  Can anyone help?

  You rescan the LUNS once?

  You've restarted the management agent?

  You've restarted the vpxa?

  If this isn't the case, please perform the step above and check out them.

• I can't create a new virtual machine, for the error "invalid state" of vmware

  Hi, I have an esx server with some production virtual machines vmware;

  Yestarday I made a new VM, suse linux, froma cdrom; but the file system broke down, it has been altered, I don't know why,

  and I had to cancel the machine using the "remove disc";

  After that I could read "a system general error occurred" and when I click on create a new virtual machine (ctrl + n), I can't because the answer is "invalid state".

  When I click on each virtual machine in 'events', I do not see the logs, I see this error "system general error occurred.

  can someone help me? , should I restart the service mgmt-vmware?  (init.d) on the host server?

  Thanks in advance, best regards

  Toscano Max

  If you use Virtual Center, rebbot VC server and try again. If this does not work, you may have to restart the ESX host.