Install ESX 2.5.5 - installs require licensing to allow power on virtual machines?

Similar Questions

• Is there another license for a Windows 7 virtual machine?

  I just bought the full version of Windows 7.  I want to install a new copy on my laptop, and then create a virtual machine from it.  I'll be able to do this or will it take two licenses?

  Thank you

  You will need an extra full version license.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• Is always required OS to create a guest virtual machine?

  I create windows applications using development tools (such as Visual Studio, etc...)  hosted on a Windows 2008 Server.  I work directly with the console of the server.

  I would like to use VMware Workstation to create virtual machines. What I have to install another OS for this or can I use the host operating system?

  Thank you

  CBenac

  What I have to install another OS for this or can I use the host operating system?

  A virtual machine is a machine separated, so VIRTUAL machine, so if you intend to allow that VM to run, you must install an OS (this is called a GUEST operating system).  If you want to install the programs on the host computer, you need not the virtual computer

• Error: "there is not enough disk space on C:\WINDOWS\$NtServicePackUninstall$ to install service pack 2, the installer requires a minimum of 4 megabytes of free space

  Hello

  I'm trying to update my windows xp with service pack 2 and I get this error message. I use boot camp to run windows XP Professional on my macbook pro. I have 86 GB of space on windows left and 56 left on the side of the mac. I do this out of a disc because her dosent wireless internet works on my windows side.

  Help would be great

  Thank you
  Logan

  You can be better with v2.1.

  Wizard Boot Camp must be installed, too, according to http://support.apple.com/kb/HT1899.

  I now you gave everything I know about the installation of WinXP & WinXP Service Pack on a Mac. You're on your own from here. Good luck!

• Disable vmotion for 1 virtual machine in an ESX host

  Hello

  We have an ESX environment that is configured with vMotion.

  As a result, I've seen VMs from one ESX to another very frequently.

  Among these virtual machines, I have a very critical virtual machine, I want to move to any other host ESX.

  Y at - it an option that I can use to disable VMotion only for this particular virtual machine of mine (in order to keep constant on the ESX on which it is right now) and allow the other virtual machines to continue.

  Appreciate your help.

  Thanks in advance

  I guess that your VMS migrate between ESX servers because configuration automated DRS ESX cluster level. You can replace it for a specific virtual machine. Cluster of right click Select-> "Settings"-> click on options of the Virtual Machine under VMware DRS,. On the right, make sure 'Enable the levels of automation individuak virtual machine' is checked. You can see VMs list below. Select the virtual machine that you want to replace and change the level of automation for people with reduced mobility

• Install ESX 4.1

  Hi all

  I start to build my virtual infrastructure. I installed ESX 4.1 on 3 BL460c G1 blades with 36G of memory. I put my pagefile to 2G and my boot partition to 30G. I plan on building my VM with 1 G memory. This sounds like the best way to start?

  Thank you

  Hello

  No reason to not use ESXi?, VMware is gradually complete ESX in the next version.

  Depends on your guest virtual machines and that they will be used. So even if a server file/DNS/domain controller can be fine with 512 MB of RAM, a virtual Exchange may bring 2 GB computer + etc.

  Just start small and use vSphere client to see how are the uses of resources (RAM, CPU) virtual machines.

  In any case, a 30 GB boot partition? This is a doc of best practices for the design of complete plants ESX.

  http://www.yellow-bricks.com/2009/05/27/partitioning-your-ESX-host-part-II/

  ESXi installs in less than 1 GB of HARD disk space.

• XEN running inside a virtual machine under ESX (i) 3.5?

  Hello world

  I'm still pretty new mV, so please bear with me if I ask is stupid. I have already searched the web, but I couldn't really find an answer to this:

  Let's say we have a VM-certified (for example from Dell) server running ESX 3.5 or ESXi 3.5. I understand that the following would be a typical scenario:

  -ESX 3.5

  -VM 1: Windows Server 2008

  -VM 2: Windows Server 2003

  -VM 3: Debian 4.0 (unofficially supported?)

  -Virtual MACHINE 4: Redhat Enterprise Linux 4

  Could I now install XEN in Debian of VMS 3 making 3 Xen's Dom0 of VM?

  So what I want is this:

  -ESX 3.5

  -VM 1: Windows Server 2008

  -VM 2: Windows Server 2003

  -VM 3: Debian 4.0 with XEN (= Dom0)

  -DomU 1: Debian 4.0

  -DomU 2: Debian 4.0

  -DomU 3: Debian 5.0

  -DomU 4: Debian 3.1

  -DomU 5: supported an another Linux system by XEN

  -Virtual MACHINE 4: Redhat Enterprise Linux 4

  Is this possible? If so, that requires any special parameters on the side of the virtual computer, Debian or Xen?

  Or, and this is what I hope, is the ESX service an fully transparent layer between whats running in the virtual machine (for example. Debian with XEN) and the actual hardware.

  In other words: is the installation of Debian in VM3 "knows" that he is not actually run directly on the hardware?

  Thank you very much in advance for any answers or advice in the right direction!

  Tom

  Depends on the mode of Xen.  If Xen tries to use the VT / SVM instructions, it will not work because these instructions are not virtualized.  If Xen is running a guest paravirtualise it could work - anyone I know has ever attempted.  (So, "no".)  If this does not work, we would like to hear about it.

  Re: Why Debian is not a client supported... it's a problem of bandwidth QA, invited taken in charge to be tested carefully so the number of guests that can be supported is limited.  Debian runs almost certainly - it is very similar to Ubuntu, which is supported - but VMware not QA, if we do not pretend that support.

• How to install the virtual machine tools

  I am new to this, and it's fun to find how to do everything. I'm stuck now, so need some help, I did search but could not find definitive answers.

  I have ESXi installation, it will run on a dedicated slide. I have a windows-based virtual machine that I use to test.

  I downloaded the iso of VM Tools for Linux to install on the server so that I can push to the client virtual machines. I can't understand how to install the VM on the server tools so that I have the option in the console to push to turn the VM to the client tools.

  Is there something I'm completely missing? The iso is for linux, which is the server. I assumed it would be installed on the server that would allow me to push to windows clients.

  Help, please!

  VMware tools for Windows is already included in the installation of ESX.

  Customer Infrastructure using, go to the console of the virtual Windows computer and logon. Right-click of the virtual machine in the inventory on the left, then select "install/upgrade VMware tools. If Autorun is enabled the installation starts automatically, if not the Windows.iso is loaded into the virtual computer CD-ROM drive and you have to run setup.exe.

  André

• Install a VSA on the esxi who already has virtual machine running host

  Hi all

  I have install VSA if my esxi has already running virtual machine host, I read some post saying that before the VSA, the esxi Server installation must be clean without any host virtual machine created, is - it true?

  Keith

  Hello

  I already answered you on a previous post.

  question of VMotion

  Kind regards

  Julien

• Impossible to install windows server 2008 on virtual machine

  Hello

  I installed vmware 9 without any problems, but when I create a virtual machine and I want to install windows server 2008 on it, I see this error:

  This virtual machine is configured for 64-bit operating systems. However, the 64-bit mode is not possible.
  This host supports Intel VT - x, but Intel VT - x is disabled.
  Intel VT - x can be disabled if it has been disabled in the BIOS/firmware settings or host was not powered by bicycle since changing this setting.
  (1) check that the settings BIOS/firmware activate Intel VT - x and disable "trust execution."
  2 turn on the host if either of these BIOS/firmware settings have been changed.
  (3) turn on the host if you have not done since the installation of VMware Workstation.
  (4) update of the BIOS/firmware from the host to the latest version.
  For more information, see http://VMware.com/info?id=152 .

  What can I do?

  my laptop is vpccw27fx of sony and its configuration is

  Processor: inter (R) Core i5 M520 @2 cpu. 40 GHz 2.40 GHz

  RAM: 4G

  OS: Win7 64-bit

  I mention that the host BIOS/firmware is up to date, but I don't know how to check intel vt - x which is disable or enable. !

  Hello

  Restart your laptop and try to get into the BIOS, look for virtualization or VT - x and allow it

• What is the best way to backup of virtual machines on a standalone ESX with the data store local

  Hello

  I want to save the virtual machines on a host ESX autonomous. and all of these virtual machines is the local data store.  What is the best way to save these virtual machines in this situation?

  And probably we don't provision VTL on the local data center, so it is possible to use VCB to backup? And VCB is a good choice compared to the traditional method that installs the backup client in each virtual machine?   Because I think that in this situation with the data store local, it cannot not reduced the load on ESX hosts and network overhead can be avoided.

  Thank you!

  LAN

  > 1. VCB usable remote tape library? I mean it's not local library and uses the tape library to another network data center.

  VCB is completely unrelated to the tape library, it is a framework, not a backup solution. If your standard backup software can work with the remote tape library you can try it to ungrateful with VCB.

  > 2. what the difference bwteen hot - added NBD and modes if there is that an ESX host with store data local and want to use a virtual machine like VCB proxy? I think that they are the same: the VCB proxy read data through the I/O of the ESX host stack in this situation.

  NBD works on network and the backup traffic goes through the service console connection. Hot add uses special machine for assistance to connect vmdk to and uses of e/s disk stack instead of e/s network.

  > 3. Veeam Backup is free software?

  No, it isn't.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• When capturing installation - if I saw the virtual machine is it captured as well?

  All right, let's assume that I am ThinApping an application and I'm in the middle of the installation of the main application and a few children and updates applications.

  If something goes wrong, I don't want to start from the beginning.  So after that I installed can the first main application I take a snapshot of the virtual machine?  Well, I know I can, but my question is will be captured by thinapp and packed to the top in the final exe file this snapshot?  Something I want to happen.

  If so, how would I exclude in the build?  If the snapshot is not captured, so it's perfect.

  Snapshots of workstation are stored on the host computer. ThinApp scans the guest and will not see the snapshots of work stations. So you can take snapshots of work when you want, they are included in the package.

• Open a virtual machine in a san on 2 different esx hosts

  Hi, I have a Vsphere essentials, 2 Esx hosts and an Iscsi san, I need to connect the virtual machine in the two esx hosts (I know I don't have FT and HA), in order to launch the virtual machine never the first Esx and if first host, does not have the virtual machine on the second esx.

  I tryied to connect the virtual machine to the second host, but the Vsphere client tell me that's not possible, because the virtual machine is already present at the first ESX.

  There is a way to establish this setting?

  For some it may depend on your application, if you can run multiple instances of the same application? If it is a web application? It stores its data in files on the server, or it stores it in a database locally? or remote database?

  -VM on a local storage of the army, would not really recommended if you need so that it starts the VMS on host b quickly.

  -If the two hosts have access to permits it storage even say and what the application can really be run only once.  He could only save it to HostA and if it fails at some point that it will be released the lock, have it on the virtual machine and you will be able to manually register the virtual machine to host b and start the virtual machine.  However, you will not be able to really get ahead.

  -HA out of here, as if a host or power failure shuts on HostA, HostB will feed into the virtual machine down automatically

  -FT - here in the spectrum creates a VM ghost on the secondary host in levels (what happends on HostA happens on host b)

  -Another option to the other end of things has implemented Microsoft MSCS Clustering with iSCSI support I think.  You can run VMS with iSCSI to your San and clustered like this application.  Just note that with iscsi client it uses some CPU to create iscsi packets.

  -Web Cluster, Cluster database.    It doesn't matter if one of the nodes of web servers or the database nodes go down really that the user will be redirected to another node in the cluster so really no need for HA/FT.

  Of course, with some of the here above are expenses and pro / con of and there's a few ways to increase availability.

• Cannot install Trend Micro 2012, receive error message: "your computer meets all the installation requirements, so Setup must stop."

  Original title: Problems installing Trend Micro 2012

  Tried to install Trend micro on my laptop, and towards the end of this way the message; "Your computer meets all the installation requirements, so the installer must stop." appeared. He then read "Windows update," I clicked on the link and also called microsoft who gave me the link updates from SP1 to SP2. I did (ran for almost 2 hours!) and recorded. I then checked the edition of windows under system and it has not saved the update even if it is registered and installed to my files. Tried to do the foregoing twice, still the same problem. Rang Dell and they sought to find an answer to the problem, but did everything they could. Still no answer to the problem after all. I have Windows Vista Home Basic as my operating system and installed Trend micro in the past with no problems. (Not sure if the following has nothing to do with it, but thought it might be useful a mention). I changed to Microsoft Office 2007, which has already been installed on my laptop for Office 2003, because I found it difficult from the laptop to the desktop and I didn't really want to pay for the upgrade of my office, if I didn't need it.

  Hello

  You need to install Trend Micro Titanium 2012 Vista SP2 or later version

  See this: http://support.antivirus.co.UK/trendmicro/kbresolution.jsp?Hmid=53756&ServiceId=51&ApplicationId=345

  I suggest you follow these methods and check.

  Determine if SP2 has been installed or not?

  To see if the update has been installed, review the installation history

  To view the history of installation, follow these steps:

  a. click Start, point to all programsand then click Windows Update or Microsoft Update.

  b. click view update history.

  c. find the latest entry for the specific update.

  d. If the entry shows the success in the status column, the update has been installed. If it says pending in the status column, the update is not installed.

  Post back with the history state of Windows update, mistakes, if there is.

  If the update is successful, if it does not show in system properties run System File Checker tool.

  To do this, follow the steps in this link:

  Follow the steps in this link: http://support.Microsoft.com/kb/929833

  In the meantime, you can check this link for the required components, that you must take to install the Vista SP2. Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/is-is/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Also these return these items:

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.microsoft.com/kb/2438651

  I hope this helps!

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com