the call for a Vision Acquisition Express VI into a loop

Similar Questions

• 2014.02 - Bluescreen Windows 8.1 vision acquisition software (imaq vision acquisition express vi in labview)

  Hello

  I have big problems to install the Acquisition of Vision software to Windows (64-bit) with installed LabView 2013 SP1 (32-bit) 8.1. He finds himself in a blue screen after the computer is restarted.

  My main problem was that I only had 'Vision Acquisition' express vi LabView 2013 SP1 Windows 8.1. So I installed this VAS2014.02 (http://www.ni.com/download/ni-vision-acquisition-software-2014.02/4584/en/) and it solved the problem, the vi in labview and works fine until I restart my pc. Because after the restart of the blue screen is coming. After several times of blue screens it came Windows 8.1 recovery menu. By selecting "Help for starting" or something similar (I have German OS) in "Advanced Boot Options", the system could be recovered with relatively little loss of data (work today has been lost, only yesterday the files were there). So I repeated the installation of VAS2014.02 and once again the same: blue screen after restarting Windows 8.1.

  It is not compatible with it?

  (but it is: NEITHER Vision Acquisition Software 2014.02 - Windows 8 32-bits/8 64-bit/7 64-bit/7 32 - bit / Vista / XP 32-bit/Server 2008/Server 2003 R2 32-bit)

  What can I do to use the Vision Acquisition express vi into labView 2013 Sp1 Windows 8.1? I had lost the good part of the time today to operate without success. Thank you for your suggestions in tips!

  Michael

  Hi Michael,

  I'm sorry for the problems you are faced with customer Service. There is a known issue with some software components which ARE pulled inward, which will cause the BSOD you see. The problem is examined formally at the moment, but in the meantime, the simplest solution is to remove the stand from the IO IMAQ for R series cards (1483, 1473R, 8237R, 825xR) as described here: http://forums.ni.com/t5/Machine-Vision/After-upgrade-to-NI-Vision-Acquisition-Feb-2014-Windows-does-.... If you require the use of these cards, there are other workaround solutions for which you can contact OR support that is formally addressed.

  Kind regards

  Joseph

• Vision Acquisition Express vi has stopped working

  Hello world

  The Vision Acquisition Express vi has always worked perfectly on my pc, but all of a sudden it stopped working today (I drop on the block diagram, but there is no window pop up or something,

  I tried the following:

  -restart the pc (did not help)

  -Try the other express vi (including another vi vision express) (worked fine)

  -convert in normal vi (empty vi as a result)

  -Open properties with rightmouseclick (did not help)

  -Open a doubleclick properties en example and rightmouseclick (did not help)

  Someone at - it an idea?

  Best regards

  Henk

  Hi Henk_kempen,

  It's really weird. Do you know what happened to the VI/PC before that happens?

  There are a few troubleshooting you can try.

  1. this problem really close question assistant DAQ in this white paper. You can try the method in the link below to see if that solves your problem.

  http://digital.NI.com/public.nsf/allkb/5CD79190713D2B558625765F007FCC99

  2. repair of the software is another option. He has worked in many cases.

  3. I try to avoid this problem, but reinstall the software can help in your case.

  Best regards

  TuiTui

• Must my webworks games implement the Scoreloop for approval or just to get into the construction of BB program?

  Must my webworks (for BB10) games to implement the Scoreloop for approval or just to get into the construction of BB program?

  Originally using Scoreloop was a requirement for the criterion of integration of services with the games, but this requirement has apparently been removed, as mentioned in one of the webcast that we expect them to post here sometime soon: https://developer.blackberry.com/builtforblackberry/documentation/videos/index.html

  Note that this page still says Scoreloop is required: https://developer.blackberry.com/builtforblackberry/documentation/criteria/games.html

  This page, however, has been changed so it is no longer required: https://developer.blackberry.com/builtforblackberry/documentation/criteria/checklist.html

• Operator Interface labview and teststand back the call for promotion of status sequential

  Hello

  I am looking for a solution to be able to take by the API Testand 'call sequence' status key of my teststand sequence.

  The idea is to combine, on my operator labview interface a specific indicator pour each call sequence 'important '.

  Example: an indicator to test consumers, another for power supply, an another SoftComm ex but not pour tests under

  The first solution that comes to me and inspired by what I could find on this forum is the utilistion method PostUIMessageEx en post expression for each call sequence don't I want to get the result.

  I find this solution satisfactory sector a bit heavy and a little too dependent on the test sequence she herself.

  Other solutions of would they?

  Please pour your contributions

  Hello

  In general, I get the UIMessage TraceCallback. So based on the name of the step (say consolidated test for example) I can do whatever I want since LabVIEW update my GUI without having to change the TestStand sequences.

  Kind regards

• How to recover the call for a silent call

  Hello

  I put in work AbstractPhoneListener in my application. Is there a way I can get a silent call notification as there are reminders for the holding of a callHeld() call and call resume callResumed(). I know that there is no appeal in AbstractPhoneListener interface. Is there any other drink so that I can get silent call notification?

  Concerning

  Prashant

  getStatus () of the PhoneCall class you will get the status of the call... In your case, it will return STATUS_CONNECTED_MUTED (which is a public static int in the same class)

  Thank you!

• View the calls for papers

  I'm content Chair EMP/BI for the Kscope16 Conference in Chicago. I would like to publish a call for contributions in the concerned areas.

  It of nothing that specifically prohibits this as far as I can see in the rules, FAQ or rules of conduct documents. The moderators have no problem with that? I don't really want to have my deleted messages simultaneously in eight areas and become a topic of conversation in the mod space...

  I do not think that a post from me on OTN involves any kind of support of the Oracle, but for what is interesting (and for those who don't know) Kscope is a 100% Oracle conference that enjoys the support of several "branches" of Oracle, OTN no less.

  I post here in order to achieve the OTN community managers (moniquevdb-Oracle, Laura Ramsey-Oracle and so on) for an 'official' answer and not to interview all the members, and very respectfully, I ask that someone don't not corresponding to the old description that wants to offer an opinion in a separate discussion. I'm sure that won't work.

  Thanks for your time.

  Product areas would not be the right place for this, but we can probably find a reasonable way to publish a call for contributions in a general area. I added you as a friend if you can me message directly. In the meantime I'll connect with Hocinebelatreche-Oracle and Oracle-valeriesimpson to make a recommendation.

• Procedural error the call for VARRAY String as parameter

  Hello

  I get the error during the call to the procedure:

  Here are the steps:

  CREATE or REPLACE TYPE PART_TYPE IS an OBJECT (part_number VARCHAR2 (120));

  CREATE OR REPLACE TYPE PART_REC_TBL IS VARRAY (1000) of PART_TYPE ;

  I have a stored procedure in the package:

  create or replace package TEST_PART_SEARCH_PKG AUTHID CURRENT_USER AS

  PROCEDURE ADD_TO_PART)

  p_part_number_list IN PART_REC_TBL ,

  p_ord_number IN Varchar2,

  x_error_flag OUT Varchar2,

  x_error_msg OUT Varchar2

  );

  end TEST_PART_SEARCH_PKG;

  When I call the Package:

  DECLARE

  v_flag varchar2 (100);

  v_err_msg varchar2 (100);

  BEGIN

  TEST_PART_SEARCH_PKG. ADD_TO_PART ('09031518,0897701 ',' 003146M 56', v_flag, v_err_msg);

  END;

  error report-

  ORA-06550: line 5, column 6:

  PLS-00306: wrong number or types of arguments in the call to 'ADD_TO_PART '.

  ORA-06550: line 5, column 6:

  PL/SQL: Statement ignored

  It would be helpful if someone can help me on this

  Obviously. There are no part_number, so turn in your package and get rid of it:

  FOR indx1 IN 1.p_lot_number_list. COUNTY

  LOOP

  BEGIN

  SELECT

  inventory_item_id

  IN

  var_item_id

  Of

  test_part_number_v

  WHERE

  PART_NUMBER = p_part_number_list (indx1);

  EXCEPTION

  WHILE OTHERS THEN

  var_item_id: = NULL;

  END;

  SY.

• The call for a process when you click the link export v4.1.1.00.23

  Version 4.1.1.00.23

  Hello

  I have 6 Classic reports on the page.

  Each report has link active Export.

  I need to insert the set of results that is questioned about the report in a table. Each report is independent of each other.

  Each report has its own table to insert the result set in.

  My thought was to call a process Page when a user has clicked on the link export, but the process is not known. I put: apex_application.g_print_success_message: = 'Insert '; in the process of the Page to tell if the process was called. I think that the process is not called because the page is not sent when the user clicks on the link to the export. It is purely a guess.

  What I tried:

  Working with just the first report, I created a page element hidden in the region of the report and created a calculation before heading for the region ID.

  SELECT region_id
  FROM   apex_application_page_regions
  WHERE  application_id = :APP_ID AND
         page_id = :APP_PAGE_ID AND
         region_name = 'My First Report Region'
  

  Then on the wording of the link for the link export in the attributes report I put:

  < a href = "f? "p = & APP_ID.:124: & SESSION.: FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us" > Export CSV - my first data reports < /a >

  The Condition, that I used in the process of the Page is:

  Point process: submit now - after calculations and Validations

  PL/SQL -: REQUEST = FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us

  of course, that didn't work so I tried it - "FLOW_EXCEL_OUTPUT_R" | & P124_ESSCSD_REGION_ID. | "_en - us

  and I tried it - "FLOW_EXCEL_OUTPUT_R" | : P124_ESSCSD_REGION_ID | "_en - us

  None of which worked.

  SO, can someone help me with a solution called a process to insert the data in the report, when the Export link is called?

  What information can I I provide/clarify?

  Thank you

  Joe

  Knew that I had seen cela somewhere... Try to watch this blog of Martin D: D'Souza Giffy Martin on Oracle APEX: APEX report download recorder

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• The call for a process of application using JS by a button

  Hello
  
  I need to create a button that deletes the entire table All_References lines.
  
  I have created a new process of shared components "Delete_All_References" call, then set it to run on demand.
  
  PL/SQL block:
  
  Begin
  Delete from All_References;
  End;
  /
  
  In the HTML header of the page on which lies the button 'Remove all references' or P13_DeleteAllReferences, I entered in the following:
  
  < script language "JavaScript" type = "text/javascript" >
  function Delete_All_References()
  < /script >
  
  I have then entered the settings button, set the action to "defined by dinamic action", then added onchang = "javascript:Delete_All_References();" "in HTML table cell attributes.
  
  According to most of the tutorials when I click the button remove all the button of refereneces, my table should now get clear but it doesn't.
  
  Can you guys please help?
  
  Thank you and best regards,
  Diez

  The onchange event will work fine. Change the button back to a normal button instead of linking to a dynamic Action for now.

  The only other thing I see which can cause a problem is your call to the method itself.

  OnChange = "JavaScript:Delete_All_References();" »

  Need to replace...

  OnChange = "JavaScript:delete_all_references();" »

  The called javascript method is case-sensitive.

  Let me know if it suits it.

  Malay Keith
  www.blackhawkenterprise.com

• The call for an expression that is stored in a single location (such as a link, or an 'include')

  I would like to make an expression (for use on different layers throughout several compositions) which triggers a primary expression that is stored in a place... (maybe it would be an expression on a layer on some fake computer unused or as a text file, if possible).

  In terms of programming, it's like the use of an include file.

  Is something like this? The goal is to allow editing of all instances of a place.

  Thank you

  If you store your expression in a text layer (named "expression_layer" in this example), you can run it with the function JavaScript eval(), like this:

  eval (thisComp.Layer("expression_layer"). Text.sourceText.value)

  Dan

• The call for a Subvi without providing a reference to the objects inside the Subvi?

  Hi all

  Suppose I have a Subvi, which trace Y1 vs X 1 and Y2 X 2 vs on the same XYGraph. See attachment.

  XYGraph the property node is linked to the XYGraph. It sets the style width and point line for each curve on the XYGraph.

  If I call this Subvi 4 times in other code (make 4 diferent XYGraphs (XYGraph1, XYGraph2, XYGraph3, XYGraph4, each of which contains two lines Y1 X 1 and Y2 X 2 vs vs)).

  Why would I need to create 4 different references for 4 different XYGraphs?

  The question is really this: If the property node is explicitly linked to the XYGraph in the Subvi, why the property node must be updated via a reference if the Subvi is called

  several times to several XYGraphs? Wouldn't the Subvi take entries, draw the curves of the XYGraph, update the nodes property and then produce a final with XYGraph

  update properties?

  If there is to be a Subvi why you a graph on its façade and manipulate its properties? You will have to manipulate the properties of the chart on the front of the top-level VI. You see a graph is not a type of data - it is a display object. What is passed through calling screw terminals are given, and in this case, the data type is an array of clusters containing a table of x values and an array of values there.

  

  If you want to do a Subvi that performs this operation you must pass it a reference to the curve that you want to handle that one of them has entered the data values.

  Mike...

• The call for a third party lib/jar

  I got this blackberry tutorial to work using native code:

  ---
  The tutorial
  http://InfoCenter.Sybase.com/help/topic/com.Sybase.InfoCenter.dc01214.0200/doc/HTML/title.html

  the zipper to the tutorial already done:
  http://www.sdn.SAP.com/irj/BPX/index?RID=/WEBCONTENT/UUID/40ea4956-b95c-2e10-11B3-e68c73b2280e

  ---

  Now that I got this race, I need to run in WebWorks

  I managed to create all the code and I need plugins, but I can't get the last piece to work:

  when I add the pot inside the plugin: I get the following error message when I run the app

  > MyApp from error: Module 'MyApp' has verification error 1691 to
  > offset (file version of code 79) 0ed9

  when I push the jars manually: (it is the operation of the application to native code) I get a classnotfoundexception when I try to call in the form of code libraries.

  My conclusions are:

  -in the case I put the pots inside my plugin, the code is not written in a way that BBWP can compile properly and causes errors when you run the application. This can only be corrected by the authors of the lib.

  -where I push the lib on the phone, I think Miss me something in my config to indicate my webworks project to use the files that are outside the project.

  so my question is :

  How to make a project of webworks blackberry to use the libraries I have deployed on the device in the same way as the blackberry eclipse plugin?

  Therefore, scenario 1

  OK, you'll have to do the following things to use:

  (1) write a Java extension that uses this library. Follow the Jeff tutorial on how to get set up and extended using the eJDE/JDE. It will essentially be a library project that has the library of Sybase on its classpath. Test it, make sure that everything on the Java side works as expected.

  (2) copy or package your extension in a subfolder of your choice in the folder "ext" package WebWorks Manager installation.

  (3) library of part of copy the 3rd POT in the same subfolder created in step 2 to the root of your package structure.

  (4) create the library.xml to the extension and make sure you include the tag of dependencies that Jeff has mentioned above. He needs to reference the JAR correctly.

  (5) to deploy Sybase COD files on your device.

  (6) add the tag from your config.xml of your WebWorks app file extension.

  (7) performance bbwp to build your App WebWorks deploy to the device and it should be able to link to the library of Sybase correctly.

  What you do in steps 3 and 4 says bbwp to include the JAR files to the classpath when you compile your application with the extension. This will allow the application to compile successfully. The contents of the JAR are now part of the file of your application WebWorks COD and hopefully will allow him to link during execution with the cod of the library prédéployées.

  Let me know if this worked for you.

• Questions about the call for a process of a web site

  Question regarding the appeal process.  I'm new to this part of the technology and I don't know that many would know how it works.  We have a Workbench process that must be called from a remote web site.  The process could take a parameter... That is to say an ID.  The process will then query the database and return a Boolean value to the site and then this site might perform a specific operation.   My question is, are there examples out there that someone could provide which can show how this can be done?  What do I need in my site (I don't know how to configure the buttons create OnSubmit processes and very familiar with javascript, html)?  I think that, somehow, it can be done with SOAP or REST?  Thank you very much in advance for any help.

  You just need a form in HTML with elements (for example textbox - string, file - document etc.) with the same name as the name of the process input parameter and the action attribute of the form must be URL REST of process-oriented.

  For example: for a process(short-lived) having REST URL: Http://localhost: 8080/rest/services/WatchedFolder...  with a parameter in the XML and the document as an output variable, we will use the HTML code below:

  http://localhost: 8080/rest/services/WatchedFolder... method = "post" enctype = "multipart/form-data" >

  Chose a file to send to the process.

  file:

  When you click on submit, the output document would be opened in the browser automatically after submitting the form.

  -Wasil

• The call for Experts: help build my DV, mounting system (CS5)

  I read several incredibly helpful articles/guides on building the best PC for the buck.  Evil is perhaps the greatest.  I can't help but notice most of what I read were written a number of months.  In this never ceases to evolve, rapidly changing industry, which translates by light-years ago.

  Some of you experts can I ask this question: If you had $2 k - ish to spend on editing system w / CS5 Production, what would you choose for YOUR system? Excluding the screens, keyboard, mouse, speakers, etc.  Just the case, mobo, RAM, CPU, GPU, PSU, HDD (s), DVD + -, not BlueRay... and what I forget.

  I don't Manage NOT HD video yet, but will improve one day.  I did my homework.  I'm NOT lazy here. But I'M in a HURRY!!

  Many blessings... JAY

  Coltsman33 wrote:

  Many blessings... JAY

  Why thank you.

  	Thermaltake Element V Black Edition steel full Tower computer case Colorshift Fans VL200K1W2Z $154.99
  	Seagate Cheetah 15K.6 ST3146356SS 146 GB 15000 rpm SAS 3 Gb/s 3.5 "drive hard internal-Bare drive $179.99
  	NE5TX470F10DA Palit GeForce GTX 470 (Fermi) 1280 MB 320 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card $259.99
  	KINGWIN Lazer LZ-1000 1000W modular 80 PLUS BRONZE certified PFC active W / switch LED to 3 ways and the universal modular connector... $159.99
  	Patriot Viper II sector 7 Edition 12 (3 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model PV7312G1600ELK $299.99
  	ASUS Rampage III Formula LGA 1366 Intel X 58 SATA 6 GB/s USB 3.0 ATX Intel Motherboard $289.99
  	Intel Core i7-950 Bloomfield 3.06 GHz LGA 1366 130W Quad-Core Processor BX80601950 $294.99

  ? Item = N82E16835608014 "> Noctua NH-U12P SE2 120mm CPU Cooler
  $ 74.99
  SSO"

  

  LG Black 10 X Blu - ray burner - LightScribe Support Bulk SATA WH10LS30 - OEM

  $99.99

  Was a revised items list to fit under 2 k. f course it's missing hds required for page media etc. And also, I'm not sure if the case would be big enough for the CPU cooler. But you get the idea