Is AT200 - possible to connect USB devices?

Similar Questions

• Copy the folders (backup) of a connected USB device

  Hi, is it possible to copy (or backup) the content of my (NMH305) mediaserver to a USB HDD connected directly to the media server? I tried the utility 'copy' in the file browser, but it will not copy in files on a connected USB device (by clicking on the "copy file" button does nothing).

  Is the USB key to your aid in format NTFS or FAT32? If it is in NTFS format, then it could be the reason why you can not write to the USB plugged into the USB port of mediahub. Some linux-based devices do not work well with NTFS format. Try a FAT32 formatted drive into the USB port on the mediahub.

  See you soon.

• Auto Connect USB devices?

  Is it possible to get the customer discovers automatically connect a USB device when it is plugged on the endpoint?  More precisely from watching this for USB flash drives.

  A few times I set to make sure that we are on the same page.

  Me auto connect USB devices average transmit any USB device connected to the customer automatically to the virtual desktop without user interaction.

  This function exists today with view depending on the client device that you use. It works with RDP when using a Linux-based system think that customer and PCoIP with Linux customer base light or zero clients.

  Capacity does not currently exist with the Windows client. It will exist in the future with the Windows client if the device is set before the start of the session. If tied after the start of the session, it will still a user interaction.

  WP

• How can I configure Auto-Connect USB devices

  We have Dell FX160 XP embedded with USB cdrom drives, view 4.6, PCOIP and want to be able to auto-connect without the user click on the disc whenever they connect.

  I was told that I can do through gpo. Has anyone got the job and could tell me how to do?

  Thank you

  Enable group policy to:

  Connect USB devices to the desktop on the launch

  Connect USB devices to the desktop when they are attached

  These are in the vdm_client.adm model.

  For specific instructions on the use of these templates VMware, please consult the Configuration section group in http://paulslager.com/?p=913 policy

• When you connect USB device, explore crash in Vista

  I have a slow USB device, with some of the big files on it. When I plug in and go on the drive in Explorer, the little light on the device starts flashing like crazy, and explore stops for a minute.

  There is a 12 MB file there, which takes about a minute to copy.

  I want to watch a 16 k file that takes seconds to copy.
  Is there a way to stop explore to copy all the contents of the disc on every time I look at the device?
  
  I disabled these services in efforts to alleviate this problem; Windows Search and Superfetch, ReadyBoost.
  
  Unfortunately, deleting the file is not an option. I'm willing to take a pretty big success in the overall performance to avoid wait a minute each time that I plug.
  
  I have windows vista ultimate SP2.
  
  Thanks in advance for your help
  
  Jack

  Hi JackNeuberry,

  • Is what type of device exactly?
  • The constructor has another driver who does not have this feature exhibit this behavior?

  See the Microsoft article below on how to manually enable or disable the write disk cache.

  HOW to: Manually enable/disable disk write caching

  http://support.Microsoft.com/kb/259716

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Windows is unable to recognize the device, one of the connected usb device has malfunctioned

  in my pc it shows the error when I connect a usb device is something like this perhaps datacard or USB key via a M/F, else if usb cable connected directly connected to the pc port it works fine... even changed the cable twice there is no cable fault

  It would seem that the cables tried maybe not until the correct USB connection plug. If you test this, according to the post Michael75951, and it still does not work, perhaps he could confirm bad cable(s.)

• Need help connecting USB device

  I am running VMWare Server 2 on Windows 7 64-bit. VM is Windows XP, my old computer virtualized with software that does not work under Win 7. I don't understand how to connect a USB device, my cell phone, on my system the virtual machine host. The drop-down features of the VMWare Console includes no USB or fact toolbar at the bottom right of the Console window. The management console has an entry for the USB, but the only choice is delete.

  The documentation says "In the menu of controller USB in the toolbar, select the device you want to connect in the sector in the list hosts". I can't locate this list. Can anyone provide a picture?

  The virtual machine has a virtual USB device in its hardware settings? If not, add a when the virtual machine is shut down. Also ensure that VMware Tools is installed in the virtual machine. If in doubt, please post (tie) file for the virtual machine's .vmx. I would also check that you have the VM hardware version 7 to version because it's better for the USB feature. The menu of the USB connect device should be available when the virtual computer is highlighted in the left pane of the console.

  --

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Laptop does not start with the connected usb device

  Hello
  Voila, I have a Sp6100 Pro Satellite, when I try to start whith a usb printer is connected, the laptop does not start. I have the latest version of the bios 1.90.

  THX,
  Barzot @+.

  Hello

  What you mean with start won t at all? Is there any kind of reaction if you press the power button / stop?

• IdeaPad 13: Touch not working not not after connecting USB device

  Hi - I use a USB MIDI keyboard (Akai LPK25) with my Ideapad. I have not previously had a problem with this configuration, but since about a week there, as soon as I plug the device touchscreen becomes invalid. Remove the device is not restore functionality of touchscreen; In fact, I have to restart.

  Thoughts? Was there a recent USB update that causes this problem?

  Thank you!

  Thanks for the reply! With the help of the other port USB actually alleviate the problem, but then I upgraded to 8.1 Windows and simultaneously upgraded USB drivers, and the problem seems to have been resolved - for now).

  Z.

• 5.5 ESXi USB devices and host.

  Hello community,

  I'm just trying to connect a TOUGH USB drive that is connected to the host to a guest operating system and failed!

  The USB device lists via 'lsusb' on the host, but I have no idea how to do to connect it to a guest.

  I got tired by the "Parameters" and "Add Hardware" through the vSphere client and the USB device does not appear!

  If I use the "Connect USB devices" button in vSphere client, I can only connect USB devices connected to the management station.

  Is it possible to connect USB devices connected to the host?

  I hope you can help me!

  Kind regards

  Matthias.

  I just follow advice of jkopp on the change of version vhardware th in thread 5.5 of the ESXi hypervisor free Web Console .

  I just changed to v9 and was able to add my USB HDD to the guest host, so if you have the same problem as me, just spent in HW version 9 and then, you are able to connect devices USB connected host!

  Kind regards

  Matthias

• Qosmio G20: Possible boot from a USB device?

  Dear all,

  I am writing for you good people was whether it is possible to start a Qosmio G20 via a connected USB device, an external hard drive.

  I wonder if it is taken in charge (or tolerable) within the limits of the current Qosmio G20 BIOS and/or if any could attempt on my part to make taken in charge (i.e. are there buttons I can push levers, I can pull or numbers I can play to get there).

  The reason why I have is that my laptop has a multitude of technical difficulties that point to the hardware failure, among them a vertical line on my screen and a problem with my optical drive, making it impossible for me to write a CD or DVD.

  In the unlikely event that the good folks at Toshiba support are forced to replace the hard drive (or the system) it would be nice to have a way to restore the system to its current configuration (in this sense, I'm looking for a way to create my own bootable recovery disc produced) however the lack of functionality in the Department of optical drive ties my hands a little (I can't create a recovery of) product custom CD/DVD but I might create a product on my external HARD drive recovery partition).

  Thus, it would be useful to be able to boot from a USB, not essential of course as any disk image could be comfortably written to disk through my soon-to-be renovated system (of course it would be quicker to start just by the USB bus and avoid all this nonsense).

  Sincere greetings,
  Lee Hyde.

  Hello

  I am sorry to say that you will not be able to boot from the external USB HDD. The BIOS does not support this feature.
  According to different threads here in the support of forum Toshiba Qosmio G20 BIOS supports these devices to start:
  Floppy USB drive, 1st/2nd HDD, ODD, network (LAN)

  As you can see it s possible to floppy USB FDD but not the USB external HDD

• Cooling M30X-125 fan turns very often if the USB device is connected

  Hello
  I used USB devices with my M30X-125 during a few months and noticed that as soon as I connect a USB mouse or printer with external power supply power supply cooling fan works very often. With no device USB cooling fan is very "calm".
  I've updated the BIOS with the latest 1.90 out and changed its settings (reduce the processor speed) of the effect of Utility.No of power on this fan cooling issue management.
  Can you help me please in order to limit the work with the connected USB device cooling fan?
  Concerning

  Hello Phil

  I put t really believe that there are many options to do better. Of course if you use a USB device, the CPU usage goes over the limit of use and produce more heat.

  Try to check all the processes running and finish a useless manually.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Windows crashes when any USB device is connected

  Hello

  I have a laptop Dell Latitude D505 with Windows XP. Recently, whenever I plugged in a USB device, Windows would freeze and I have to hold the power button down to turn it off.  Since then, I tried to replace the RAM, re - install Windows on a new HARD drive and taking the other components (Wi - Fi, CD). I still don't understand why it freezes. Any ideas?
  Thank you very much!

  Hello

  1. don't you make changes to your computer, after which the issue started?
  2. have you tried to connect USB devices to a different USB port? If so, they work on other ports?
  3. have you tested the USB devices on another computer?

  Uninstall and reinstall the usb host controller driver and check if the problem persists.

  http://support.Microsoft.com/kb/283658

  I would recommend that you update your BIOS and drivers from the chipset and check if the problem persists.

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Connect menu USB devices does not appear in the view Client 4.0

  Hello world

  I am facing a problem with the display Client 4.0, in some facilities does not display the menu to connect USB devices on the top of the Menu bar.

  This situation occurs in some computers that are running Windows Vista or Windows 7.

  Is that what someone has experienced this problem?

  I think it's a problem of display compatibility customer with some component installed on the operating system, but I have not identified which we.

  Any help, pls.

  Kind regards

  Carlos Luna

  You are right, that the view Client 4.0 does not install USB drivers on 64-bit computers.  64-bit is coming.