Is it possible to adjust the size of the frame of a new project?

Similar Questions

• Is it possible to adjust the sound volume of Windows to more than 100%?

  Hello

  I have a very simple question:

  Is it possible to adjust the sound volume of Windows to more than 100%?

  I explain why I need to do this:
  I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.

  However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.

  Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.

  Please don't tell me to use a software that increase the volume of the file I want to watch VOD.

  Is there a way to increase the sound volume of Windows to more than 100%?

  Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?

  AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.

  As you already wrote the sound level can be increased in combination with Windows and some players.

  Is there any other way to watch these videos, but using WMP?

• Is satellite A500-1DN - possible to adjust the fan speed?

  Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and quite large making noise.
  I wish to address is it permanently on.

  Is this possible?

  Hello

  > Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and make a big enough noise

  I agree with you, I also own a500-1dn and it makes big noise even while surfing Internet. This forum was suggested to update Bios to reduce the fan noise.

• Is it possible to adjust the brightness of my screen?

  Is it possible to adjust the brightness of my screen?  If so, how?

  If it's a desktop monitor, there should be buttons on the monitor to do this. I found this a useful tool, you can set a different brightness for the display of day and night. However, you can also just use it to quickly adjust the brightness at any time.
   
  f.Lux
  http://Stereopsis.com/flux/

• Is it possible to adjust the alpha of a button in Captivate 9 using JavaScript?

  I was wondering if anyone knows if it is possible to adjust the alpha of a button in Captivate 9. I was able to activate and deactivate the buttons using JavaScript, but were not able to change the alpha of a button.

  John

  var thisElement = document.getElementById ("your_btn" + "c")

  thisElement.style.opacity =. 5;

• Is it possible to adjust the opacity on the timeline (CC version)?

  Is it possible to adjust the opacity on the timeline? Before CC, the video track was a bar to the opacity, as how the audio track has a bar for the volume level. This completely out feature or is it possible to add it?

  Hi Elizabeth,.

  It is there, you must extend the clips and then take the cursor of the mouse on the clip. The color of the Strip is not white so not visible clearly as before it was yellow in color.

  

  Vinay

• Is it possible to adjust the transparency of a caption slide show of Muse area, while maintaining the text inside to 100%?

  Is it possible to adjust the transparency of a caption slide show of Muse area, while maintaining the text inside to 100%?

  Thank you!

  In fact, I was wrong. Cramp brain today. It can be adjusted individually by using the link to the fill tool

  

• Is it possible to adjust the kerning by default in preferences in Photoshop as you can in Illustrator and Indesign?

  Is it possible to adjust the kerning by default in preferences in Photoshop as you can in Illustrator and Indesign?

  You can save a character style that defines kerning, but you cannot change the default behavior of the PS.

  

• ? Flash CS4, it is possible to adjust the length of several timelines at the same time?

  Hello

  I'm using Flash CS4. Is it possible to adjust the length of several timelines at the same time? I do an animation of the leaves that fall from the tree. The only leaves 17 separate calendars on separate layers and each has its own guide layer.

  If I had the opportunity to select all the chronologies set and adjust all their respective time start and end at the same time even, compared to the other, but also separately, life would be so much easier!

  Of course I can do timeline timeline, no problem, but I can't adjust the length in addition to a scenario at a time. (no pun intended)

  Even when I select more than one timeline, the double arrow only adjusts the length of a timeline. Even each layer guide must be set separately. I understand the benefit of this, but, timing tests and make adjustments would be so much easier and go a lot faster if I could select and drag several lengths of timeline at the same time.

  Is it possible to do this?

  I am new to Flash, thank you for your patience with me!

  SabelV

  You are welcome.

• Is it possible to adjust the settings of the BIOS via a command line?

  Hello

  is there a possibility to set the parameters of the Toshiba BIOS on a command-line tool?
  We have hundreds of Toshiba laptops and want to enable Wake On Lan.

  I know there hwsetup, but as much as I know this GUI does not accept parameters.
  We want to propagate the settings again on a script.

  Any solution for this?

  Thanx

  > is there a possibility to set the parameters of the Toshiba BIOS on a command-line tool?
  Something like which is unknown to me and I doubt that this could be possible.
  As you say there is a preinstalled Toshiba HWSetup tool which can be used to change some BIOS of some settings. But what a way to change the settings of the BIOS to the Windows operating system.

• Is it possible to adjust the CPU fan after replacing the CPU - Satellite L35 - S21?

  I have a Toshiba Satellite L35-S2161. It was initially equipped with a Celeron M 410. Last weekend, I replaced the Celeron with a Pentium Core Duo T2250. Everything works fine. Now, both the Celeron and Pentium seem to run a bit hot.

  The beach of temp for both are exactly the same. Honer time between Celcius 55 to 62 degrees Celsius.

  Is it possible to set the fan to maintain a temperature between 50 to 55 degrees? If so, how?

  Check this http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

  -It is uncertain whether the new processor is compatible to the system board. Integrated chipsets can take charge of their technical specifications a wide range of processors, but this does not mean that all types of CPU can be used in a mobile system for * integrated cooling systems are designed individually for each set of model in order to ensure the optimal functioning of the machine *. An incorrect CPU can cause the system to overheat and damage the internal system components.

  -In most cases, the BIOS does not work with the replaced CPU which causes a malfunction of the machine. The BIOS needs to be rewritten after each Exchange of a CPU that can only be done by an authorized Toshiba service partner.

• Is it possible to adjust the model views JHS?

  We use 11.1.2.x JHS and JDEV 11.1.2.4.

  We have a case where we have more than 1,200 entries in the JHS_TRANSLATIONS table.  The view object is configured to retrieve one row at a time.  This can be a bit of your time on the side to request ideally, we would like to start increasing the number of rows retrieved.  However, the only way I know how to do this would be to create a view of substitution to replace the sight of JHS.  Is there a better way to do this?  Right now, it takes a long time to run and we have to go down this time.

  Thank you

  
  BradW

  So, I had to extend the views JHS and then adjust the extended objects.  I then made a substitution of the view and performance is now much better.  Both views and basic are not granted. Most are, based jhs_translations views were not.

• Is it possible to adjust the paragraph after units of space increment?

  Hello everyone. I have a document with pictures inserted in the text stream. I use a style section for the image and one for the description of the image. Paragraph of the picture style has a thumb 0,1875 after the space. I want to set it down. It seems that the increments are fixed to 0,0625 inch at a time (it goes 0 to 0,0625 then 0.125 then 0,1875 and so for) but visually, it actually only adjust when increment reached 0.125 (between the two, it has no visual effect). Is there a way to adjust the increment for she does 0,0625 inch at a time instead of 0.125? Basically, I'm adjusting the space between the image and the description of the image.

  You check the attributes for the image description subsection or paragraph image to align with the grid? You should check the description. It is likely to always be a certain amount of space between them because of the leading slug but add more room by using spacing of paragraphs should be gently affecting the spacing unless you align to grid is enabled.

• Is it possible to implement the sequences to browse to project with several tables of contents and conditionalized modules

  I use RoboHelp 9 with WebHelp output.

  I have five outings, which one contains help for common functions, while the other four contain help for modules under license. When a user opens a module under license assistance, the user sees the soul help and authorized assistance. In addition, the files are conditionalized so that the unauthorized search a help licensed module brings nothing.

  I have been solving problems with the previous topic and the next topic which, thanks William, I learned are associated with browse sequences. After having tried various configurations, I have a few questions:

  • HR support a sequence to travel alone in a project, even when the project has several outputs & fakes?
  • If HR supports a sequence to browse only, does that mean that there is no way to create a unique navigation for each separate output sequence?
  • If HR supports several sequences of travel, which is the workflow?

  I also maintain a table of 'master' contents which contains all the modules, frequent and without a license. What I've done for now is to autocreate a browse sequence based on the table of contents "master." When I generate the output of a module under license, which is conditionalized, I only see the table of contents for this module and, therefore, can only travel between books and subbooks for this add-on. I also checked that the subjects that do not appear in the module conditionalized as for another module licensed, do not appear in the list of search results either.

  Carol

  Me again, Carol

  You also questions about the functional differences between WebHelp and WebHelp Pro, so let me explain.

  I know only two major differences other than (the additional benefits of analytical feedback reports) and the management of 'Zones' with authentication in RoboHelp Server.

  1. The behavior of browse sequences as explained above
  2. The fact that the categories of content are not supported in WebHelp Pro for this latest version 9.

  In regards to sequences to browse you try to anticipate the various modules (licensed, etc.): multiple browse sequences are included in an single . File BRS. Sequences are defined in the XML code in the single file.

  As a solution (for WebHelp and WebHelp Pro), you could create a Help.brs of the NPM. that you have already created a module; then backup and archive. Then create a change for the different module before generating again. The Help.brs of the NPM. will need to have the same name as your project, so you will have to manage the .brs desired file in the project folder when you build this version. All your other choices (table of contents, Index, conditional tags, etc) remains the same for the respective modules.

  Finally, I notice that you generate apparently WebHelp Pro right now even if you are not published on the server of HR? This is really not the best practice. You must generate WebHelp plain for a web server that has no HR server on it (even if you can be getting away with it). Regarding your concern about "breaking" something; each output is placed in another! SSL! folder automatically when you build, so you should be able to generate WebHelp without interfering with the release of WebHelp Pro. Then, you can republish on the HR using WebHelp Pro Server, whenever the server is ready.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• How to remove the previous package in new project

  Dear

  I created projected Hello which live package was oracle.apps.ak.per.hello.server.

  Now, I created another project like EMPCARDREQEST but especially package showing in this project, could you pls advice how to remove this "oracle.apps.ak.per.hello.server." in my new project.

  Alos want to learn oaf, pls share by email who will conduct the training OPS to contact you.

  Thank you.

  Hello

  Right-click on the EMPCARDREQEST project in jdeveloper.

  Select project--> project content properties and remove "oracle.apps.ak.per.hello.server" from there.

  then choose the package appropriate to the content project. (for ex: xxemp.oracle.apps. *)

  ----

  Dilip