Run a GUI without installed Labview labview

Similar Questions

• Run the exe file without installing labview

  I created my labview in exe file. I need to run this exe file on another computer that have no application in labview. It is afficherapres when I try to run it. What should I do without installing labview application in another computer?

  
  

• How to install module DSC without installing LabVIEW

  Hello.

  I build exe with the functions of the dsc module (I used an opc server). In my computer, it's work very well. Earlier, I want to create the installer for another computer. I have check all Inc. in the other installers. And build.

  I install my installer in another computer, but I can not create opc client. In services, I find national engine Instrument variable. Its engine description i/o for LabVIEW and LabVIEW DSC. There is prksent ( http://www.ni.com/white-paper/11843/en#189456_by_Category ) that I need to install the DSC module. But when I try to install the dsc module it shows error like "OR LabVIEW 2010 must be installed before you can install Module NI LabVIEW 2010 Dataloging and monitoring control". So, how can I install DSC module in third computer without installing LabVIEW to run exe, where opc client functions.

  Hi, a LabVIEW executable that will run on a target computer requires the engine run LabVIEW version in which the code has been developed more, any other runtime related to the application, in your case: + the Runtime Module of DSC system. Here is an article that can answer your question and the Readme file for installation instructions.

• is it possible to use the front panel without installing Labview?

  Hallo,

  I have two quick questions:

  1. is it possible to use the façade of a labview software without the need to install Labview itself? I mean something similar to the "power point viewer" that can display Power Point files without installing microsoft office.

  2. in a graphic intensity, how can you change the color?

  Thank you.

  Hello

  What you need to do is

  (1) turn off the interpolation color option

  2) click Add marker, which will add the marker where you want to add

  (3) then right click on the digital value for the marker, you created and you will see the tag, saying: "Color of the mark". Select the color you want.

  In one example, I created values 77 and 23 markers and their red and gray Cap. Hope this helps

  Concerning

• How to develop the final application exe file that will work on PC not installed labview

  Hello

  I developed a labview application (I request manufacturers/builders and professional license).

  I generate the final exe file by the tools of-> built Application exe of VI-> fact file

  But this the application exe file runs only on machines installed labview. His works do not on the other PC.

  For the execution of the other PC I have to do.

  Hello Ramji,

  As you said, EXE is created by you and its nning ruou fine on the PC where you created such as LabVIEW is present there.

  So for LV CE, please create an installer and Add Installer/additional software required by your EXE.

  Look at the link for reference.

  http://www.NI.com/white-paper/5406/en

  Kind regards

  Leila

  CLD

• How to install LabView Run-Time 2011 silently without removing daqMX?

  I'm trying to silently install LabView 2011 execution using the Agent HP Client Automation, formerly RADIA.  I tested successfully, however, the systems that installed daqMX have, I find that the silent installation program removes daqMX automatically.  Is there a command line argument or register defining who can defeat this behavior so that daqMX remains installed when the silent installation program is finished?  Thank you very much for your help!

  Hey EricJay,.

  I'm not very familiar with the Agent, HP Client Automation, but the silent installation should not automatically uninstall the DAQmx drivers. You can compare the process HP Client Automation Agent uses with a silent installation using command-line arguments, as described here. Another possibility could be any conflict check that the HP Client Automation Agent performs. As described here, we do not recommend installing DAQmx drivers until LabVIEW or LabVIEW runtime engine are installed to prevent contradictions or missing references. If HP Client Automation Agent is to detect these potential conflicts so we can uninstall the DAQmx drivers for conflict prevention. I hope this helps!

  -Ryan S.

• Run myapp.rtexe without LabVIEW?

  I would like to distribute my target real-time application, myrttapp.rtexe, to other users who have not installed LabVIEW. I have an application in front of the side Windows that communicates with him using shared variables. It is started as a standard myfpapp.exe in Windows. When I installed on my side LabVIEW Windows PC, I can start myrttapp.rtexe using the Project Explorer > build specifications > RT. CLK. myrttapp.rtexe > run as startup. However, people who I will distribute myrttapp.rtexe, will not have access to the Project Explorer since then have not installed LabVIEW.

  Is there a way I can start myrttapp.rtexe without using the Project Explorer or LabVIEW?

  Thanks in advance,

  BenCh01

  I have no real experience with later versions of the RT and no experience at all with FPGA module, so I can't really answer any of these questions.

  My suggestion to stop the program had to have the code in the program that waits for a command and then properly stops the program. This command can be sent over TCP, can be defined by flipping a DIP switch or by triggering a DI, etc.. I'm guessing that the RT target would not let you replace the rtexe file, while she is still ongoing, but that's just a guess.

• time of Labview application to run on pc without slow loading labview environment!

  Hello!

  I did an executable file of my project.

  When I run it on my pc (where installed labview development), I don't have problems and instantly loaded application.

  I tried to run the exe even on several other computers, all having the same trouble - the façade poped up after 2 minutes of waiting.

  I made a little test and pluged out the network cable - it solved the problem, but I need the network.

  I tried to disable the update automatic root certificate (as advised on a thread) but no luck.

  I searched the forums and found similar problems - but not solutions.

  Please help me.

  Guy.

  Yes. Problem solved.
  first turn off the auto root certificate update - no problem to find how to do this.
  Then type regedit in start-run, my computer-hkey current user-software-microsoft-windows-currentVersion-winTrust-trust suppliers-software publishing - just right-click on the state-change-change the character c to e, then press ok.
  Good luck and let me know if this helped.

• Windows 7 takes 15 min to start after installing Labview 2012

  Hello

  I need help on this, is this a bug?

  The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop.

  At first I thought something with my laptop, but then my colleague also installed Labview 2012 on his laptop and has exactly the same problem, the difference is that his new laptop and is running windows 7 Professional 64-bit, mine is older and is currently running windows 7 32-bit professional.

  I tried to disable the services NOR, but has not solved the problem, but when I disable all windows services that start at startup, the startup is fast.

  Also note that I had Labview 2011 installed before and I didn't have this problem before.

  Tried also to find something in the registry, but nothing.

  Any who have this problem, or a solution to this?

  Thanks in advance

  This problem seems to be resolved, but then he come back again a few days later

  I did many tests in my laptop and found it to be in the "Service of Network Store Interface" service (INS). Disabling this service, you have your problem solved, but there is another problem, you lose the network.
  This happens because the "DHCP Client" service depends on the national statistical institutes.

  Also, this issue seems to occur only when the PC is in a domain and I'm in a windows server (Windows SBS2008) domain.

  Then I found that if you set manual this services which depend on national institutes of statistics (DHCP Client, DNS Client, IP Helper, network connections, local awareness network) and also put INS manual
  You must also disable the "Workstation" service that also depends on national institutes of statistics (why turn off? Because there are 3 services that depend on the workstation service, they will require to start, and then it will force NSIS to start, then long boot, if you really need of the dependent services on workstation, do the same as for them)
  Not also need uncheck this services in msconfig window if they are checked, and then the PC will boot normally without a network.

  When you start, you should go to services and start the DHCP Client for the network (and the other if you really need)
  This will force also NSIS to start and other services that depend on the national statistical institutes.
  The first time the PC restarts, you may need to reset these services to manual in the services window, I had to do, and then in sebsequent boots, they have been already set to manual
  If you leave right on the dependent services in automatic or automatic (delayed start) it will force NSIS to run and start time will go to + - 15 min

  Because you must manually start "DHCP Client" for the network, here's a solution to do it automatically after have connected you:
  1 - Go to control panel, and then open administrative tools
  Task 2-open Scheduller
  3. on the right click "Creat fundamental task.
  4. in the first window give a name ("DHCP" for example) and press next
  5 - Click on "When I Logon" and press next
  6 - click on "Start a program", and then press next
  7. in the "program/script" insert: net
  8. in the "Arguments" insert: start "DHCP Client".
  9 - Press 'Finish' and you're done

• 'Lack of installation files' then install LabVIEW 2014 (Win7-64 on a VMWare system)

  Hello

  I try to install LabVIEW 2014 on a VMWare Windows 7 - 64-bit environment, with no luck.

  3-DVD installation media has been downloaded from NI.com, the release of August 2014 of the Site license academic (ASL), which my company is a regular subscriber, a very long time.

  (Interestingly enough, this same virtual system has fonctionnee LV 2012 without any problem whatsoever)

  Here are the steps I followed:

  -unzip the 3 iso files on separate directories on drive virtual, principal of this system;

  -Run setup.exe on the first directory (IE one that contains 1 DVD files)

  -Enter the serial number of the FSA

  -l' Installer leaves just selected default English 2014 LabVIEW and the Manager of Package of VI, so I expand the ASL Core Software to add NIDAQmx 2014, and I also selects the device drivers OR - August 2014

  -J' I accept different license agreements

  -I select "I am not the end user" to postpone activation

  Setup continues but almost immediately alerts telling me that it was impossible to install "NI Customer Experience Improvement Program", Yes , I want to keep and then I see a system dialog box display of files/paths that do not actually exist on the directory DVD 1, hence the obvious error 'lack the installation files"message. If I ignore this message, several other similar dialog boxes appear.

  Either by the way, I've done various research, but, right now, apparently not a popular question at all.

  Any advice?

  Problem solved.

  For some weird reason, WinRAR do NOT extract some files from the first archive .iso (but more importantly, she also didn't show absolutely no error message, leading me to believe everything was fine).

  When any further inspection, I found about it and made extraction .iso process everything again and this time to the installation program completed without fault.

• How to install LabVIEW 7.0 on PXI-8186 RT

  I try to install LabVIEW 7.0 in real-time on a PXI-8186 controller.  It took a lot of time to go through the process, and it still does not, so I write this message in part to help and partly to document which does not work for later use.  The controller provided with Windows XP installed.  I created a bootable Windows 98 (of http://www.allbootdisks.com/download/98.html) floppy.  I plugged in an external USB drive on the PXI-8186 controller.  The hard drive would be recognized only when the BIOS setting specified startup in Windows / other OS.  I brought to the top of the BIOS setting screen by pressing the delete key several times after turning on the chassis (hold the DELETE key and turn on the chassis do not provide the BIOS settings.  In the BIOS setting, I went to the tab 'LabVIEW RT' and changed the "Startup Configuration:" to "Windows / other OS.

  I then started using the Windows 98 Startup disk and ran Fdisk

  Using fdisk, I deleted the existing partition and creates a new main back partition with the size of the complete volume.

  I then restarted the computer, once again starting with the Windows 98 Startup disk and formatted the C drive with the command "format C:".

  "When the format was finished, I used MAX Version 4.5.0f0 and some tools of-> RT Disk Utilities-> create PXI Format hard drive.

  I selected the Version 7.0 in the dropdown menu, complete the initialization of the disk without any problems and then used the resulting so that it starts the PXI chassis.

  PXI started with the message 'Transfer control user program.' followed by a 11 lines from "WARNING KERNEL.346530: error initializing floppy A:" followed by a prompt to re - format the C: drive.  I typed "Yes".

  Then the following message appears:

  Hard drive recovery to start in o/s real-time...

  WARNING KERNEL.346530: Error initializing floppy drive A:

  WARNING KERNEL.346530: Error initializing floppy drive A:

  Change the drive target C:\hdmon.bin for a start.

  Copy the host hdmon.bin target C:\hdmon.bin...

  Error: Could not open source file hdmon.bin

  Impossible to set up the hard drive boot sector.

  At this point, I can enter the BIOS and configure the computer to start in LabVIEW RT and I get the following message:

  "Could not load the LabVIEW RT of the player!

  Boot mode safe of Romans...

  Enter safe mode.

  The IP address is: 0.0.0.0

  At this point, I can connect it to the chassis of MAX and assign an IP address.  I can also install LabVIEW 8.6 real-time without problem.  However, I can't get LabVIEW 7.0 installed in real time.  It is clear to me if in time real LabVIEW 7.0 must be installed using a diskette or by software 'install' button in MAX.  If I try to use the button 'Install Software', the only version of real time available is "8.6".  When I do "PXI Format hard drive", I see an option "7.0" or a "8.6".  Also, I tried to connect it to the chassis with 2 other computers, which have all two LabVIEW 7.0 installed in real time.

  I saw an article in the knowledge base that says that LabVIEW 7.0 is supported on the PXI-8186 (http://digital.ni.com/public.nsf/allkb/B35E022CF91F6EF086256E68005FBC29) controller and another link which explains that an additional CD can be used to install the software (LabVIEW RT software does not exist on the Local host for PXI-8186 controller: http://digital.ni.com/public.nsf/websearch/4655C86B65AE7A7286256E620004834C?OpenDocument _)

  However, this knowledge base made from 24/03/2004 and I have not received any CD entitled "The LabVIEW Real-time Embedded Software CD.  I got a CD "embedded controller OR ', but it was not obvious to me how to use it.  He has an "I386" folder and a "BONE" record on this matter.

  Any help appreciated.

  After a Chase, the CD mentioned in the knowledge base has been found ("LabVIEW Real-time Embedded Software CD").  I put this CD on a computer that had at the time real LabVIEW 7.0 and Max Version 3.0.2 in it.  The Setup program ran, I installed LabVIEW 6.1 and 7.0 support and the installation tree showed that the support would be added for PXI-818 x controllers.  After running the program, I was able to install the software for the PXI-8186 and things worked as explained in the knowledge base.

  The CD mentioned also ran on my laptop, which has MAX version 4.5.0f0.  However, you are using the latest version of MAX, I don't have the ability to install LabVIEW 7.0 in real-time on the PXI-8186 controller since the button to install the software.  I looked briefly using MAX, but I could not know if it is a bug with the latest version of the Drivers of OR or a voluntary choice of National Instruments for support not time real LabVIEW 7.0 in newer versions.

• Installing LabVIEW 8.2.1 with DAQmx 8.0 on Suse 10.3 for Linux.

  We have recently updated some of our machines to Opensuse 10.3.  We have a set of instructions, that my Advisor has written that have been used for installing Labview 8.2.1 and 1.6 NATION DAQmx 8.0 on Opensuse 10.3.  I thought I would post these instructions for any person who may find them useful.

  NATION is now on version 1.7 and we began to use that, but not as of the most recent writing of these instructions.  We have installed Labview 8.5 by following these instructions as well, but they have not been modified for that either.  I used these instructions to install Labview 8.5, NATION DAQmx base 1.7 and 3.1 on a laptop since we need supported USB for a NI 9233.  It is installed without problem. I changed the following:

  On step 10, the version of NATION was 1.7 1.6 not.
  In step 11. I installed DAQmx Base 1.3 instead of DAQmx 8.0 and the message about Labview 8.0 is not being installed does not occur.
  Steps 13 and 14 should not be necessary since the DAQmx Base and Labview versions likely mutually wait to be there.

  Once I had everything installed on the laptop, Labview didn't see my camera.  I contacted NEITHER and they were very helpful and offered a few commands to run.  Here's what I did.

  I ran "lsdaq" with the following result:

  > --------------------------------
  >
  > Detection of National Instruments DAQ devices
  >
  > Find the following materials:
  >
  > OR USB-9233: "Dev1" (USB0::0x3923:0x70A8:01369063: RAW)
  >
  > --------------------------------

  So I ran "mxbaseconfig" with this error as output:
  >
  > LabVIEW caught fatal signal
  >
  SIGSEGV > 8.2.1 - received
  >
  > Reason: address not mapped to the object
  >
  > Try to reference address: 0x0
  >
  >/usr/local/bin/mxbaseconfig: line 7: 18984 Segmentation fault
  >/etc/natinst/nidaqmxbase/bin/mxbaseconfiglv

  So I ran "/ usr/local/natinst/nidaqmxbase/bin/dmxbUSBfirmware.sh" with this error
  >
  > /usr/local/natinst/nidaqmxbase/bin/dmxbUSBfirmware.sh: line 9:19214
  >/Etc/natinst/nidaqmxbase/bin/niusb9162dlfw failed

  Finally, I ran "updateNIDrivers" as root but Labview has not yet see the USB card.  It was suggested then manually enter "Dev1/ai0' as the physical channel in an example DAQmx Base VI, and it worked perfectly.  Everthything seems fully functional and I had no problem running the four tracks of the card.  Sorry for the long post, just thought I would post this information where a person is in a similar situation.

  Jeff

  Jeff,

  Support for the USB-9234 DAQmx Base was added to version 3.2. All you have to do is to level 3.1 to 3.2. Here is the download link:

  DAQmx Base 3.2
  http://Joule.NI.com/nidu/CDs/view/p/ID/1076/lang/en

  Kind regards

• 9.30 NIDAQ drivers not install LabVIEW 2011 - example. Microsoft .com's in LabVIEW 2010 under vi.llb

  I just upgraded to LabVIEW 2011 without uninstalling LabVIEW 2010.  I downloaded the last set of drivers DAQmx 9.30.  I find that these drivers are installed in a DAQmx folder under the vi.llb of theLabVIEW 2010 and NOT in the vi.llb of LabVIEW 2011.  The DAQmx features do not appear on the menus and the existing instances are reported as 'cannot be compiled. How can I get the DAQmx functions to properly install LabVIEW 2011?

  You must DAQmx 9.4.

  9.4 DAQmx

• Impossible to install labview 2012

  I try to install labview 2012 on my 64 bit Windows 7 system, but fails;

  Here are the symptoms:

  (1) I click setup.exe directly and it shows that:

  

  (2) if I run it with the administrator, it appears that:

  

  (3) I checked that I can execute another exe file...

  Thank you

  Hi Bestchun,

  It could be a damaged Setup file. Try to re - please download the installer of ni.com/downloads.

  I will follow this post, answer so if this does not work for you.

  N

• Install LabVIEW on Windows 7 X 64

  I try to install LabVIEW in NI Developer Suite third quarter 2009 on Windows 7 X 64 machine. The Setup program ends with an unexpected error. I can install LabWindows/CVI the same DVD on this machine.

  I resolved to myself. The solution is to run setup.exe on the installation disc is Windows Vista compatibility mode.