Is it possible to Client/Server?

Similar Questions

• Need help on TCP/IP port multi Client-Server

  Hi all, I'm trying to develop a client-server application to disseminate data on a few numbers of random ports (defined by myself) to the data on the server TCP stream (IE another computer) in LabVIEW. So far, I created my app using the examples OR for 'Simple Client + Server data' and it works fine. I also understand that VI 'TCP Listen' could not listen to the TCP 1 connection only and a way around this is to use the idea of queues to receive & process the incoming data. The disadvantage of the idea is that the 'port' basic (IE original port) must be the same (on each client TCP) with the TCP server and it is not suitable for the use I have planned.

  Basically on the side of TCP server, I need to graph/control data on different port numbers that are currently broadcast in real time to client TCP one computer. Is this possible in LabVIEW?

  Anyone (gurus OR incl.) advise and point me in the right direction?

  * lost *.

  Hello

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/2739 Here you can download this component. But you can also use the TCP icons which is available in the data communications > Protocals > TCp for communication and to read and write data using flattened string Variant. I have attached a small example where I'll copy a constant string to the PC to check the connection between the client and the host server. Hope this helps you.

• OATS 12.2: Client / Server functional testing?

  
  Hi all

  We are installing OATS on a server.  Multiple users will have access to the OATMEAL via the remote desktop connection.  My concern is that many users will want to run scripts at the same time functional.  Where the question: is it possible to implement OATS in a client / server for this purpose architecture?

  Rgds,

  Ben

  Yes. Install OTM agents of the client and server computers. So that client computers can access server OTM using url and executes scripts of OTM.

  Keep the scripts in a shared path available to customers as a waiter

  Kind regards

  Dembélé M

• How to connect a client server Oracle BI BI data source

  Hi all
  
  How to access the DataSource BI the BI client server?
  is this possible?
  I have to configure tnsname.ora again?
  How to access the RPD to server? What is the logic behind?
  
  With respect,
  WP

  Administration of BI - RPD (were RPD is created) can access data using odbc and OCI.
  BI client - responses BI, BI Publisher.

  You can access the source data (domain here) i.e. content presentation of RPD... from BI answers, BI Publisher only after RPD is created.

  You can open the SPR online, to view the contents of the RPD.

• Oracle Client/Server Interoperatable Matrix

  Hello
  
  Can someone give me the link Interoperatable and Client/Server Oracle last matrix?
  
  I need to connect Oracle 10 g client Oracle 8.1.7.4 database.
  
  Please let me know the overthrow of 10g that takes care of this database.
  
  Thank you

  Salvation;

  Paragraphs below should answer your questions:

  Note to master for the Installation of the Oracle database [ID 1157463.1] Client
  Client / Server / Support of interoperability between different Oracle Versions [ID 207303.1]
  How to find and install the patches database Client and Patchsets on Windows [857683.1 ID]
  Score master for the database and the Certification Client [1298096.1 ID]

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• How to make it possible for clients to upload files to my Web site?

  How to make it possible for clients to upload files to my Web site?

  Thank you for posting.

  Muse is a design software. It does not provide you server for hosting your site. However, BusinessCatalyst not. So if you publish your site on BusinessCatalyst, you can allow upload of a file interface via Web Forms or Web applications. Please refer to the following article on how you can achieve in British Colombia through webapps: http://kb.worldsecuresystems.com/kb/add-custom-content-using-web.html

  See you soon,.

  Scott Raj Rouanet

• Peuvent Test pots customized with form 6i-> Client/Server performance?

  I want to test Jar files with Forms 6i in my office, but I can't get the handle shape-> Web to work. Is it possible for the run-time load just for PJC pots when you run shape-> Client/Server? So far, when I did, it does not perform any CJP. Any ideas, tips?
  
  Thank you
  Kurz

  You cannot use CJP when you run client-server.

• Another question on the appeal of a Web Form to a form of Client-Server

  Thanks to this forum, I was able to get my Client-Server (6i) form to call a Web Form and pass it a parameter. Unfortunately, this code displays the user name and password in the Internet Explorer address bar. Although not critical, I would like to delete the user name and password to be visible. I am able to do this in the Web form code below because it calls JavaScript that will hide the address bar - but the WEB. Function SHOW_DOCUMENT is not available in the form of Client-Server.
  
  So my question is whether it is possible to convert the code 'Customer Forms Server' below which is called my Web form using similar JavaScript functionality that is present in the 'Web Forms Code' example below? I want the server code to use the javascript functionality because I want to hide the address bar (which currently shows the users Username and Password).
  
  
  Code client server Forms (able to use when you call this a form of Client Server Web form):
  CL: = "cmd /c start iexplore.exe" http://9.35.32.205:7777/forms/frmservlet? " pageTitle = trial email Reporting & config = TTMSMENU & form=./forms_test/TrialMailReporting & otherparams = p_prospect = X 110679 & userid =' | the user | » /'|| GET_APPLICATION_PROPERTY (PASSWORD). » @' || : overall. DB_Instance |' » ' ;
  host (cl);
  
  Web Forms Code (able to use when you call this Web to another Web form form):
  WEB. SHOW_DOCUMENT ("JavaScript: void (window.open ("http://'|| ") ip_port | "/ forms/frmservlet? pageTitle = dropper E/M & config = TTMSMENU & form=./forms_test/TrialMailReporting & userid =' | the user | » /'|| GET_APPLICATION_PROPERTY (PASSWORD). » @' || : overall. (("DB_Instance |'", "", "resizable = Yes, location = no, Toolbar = no, MenuBar = no, Status = no,")); self. Close () ',' _blank');
  
  
  Any help would be greatly appreciated!
  
  Published by: Buechler on April 8, 2009 15:57

  Looks like Forms 6i PL/SQL version does not correctly convert to hex.
  That's what you can do:
  Create a db stored function

  CREATE OR REPLACE FUNCTION to_hex (p_string VARCHAR2)
     RETURN VARCHAR2
  IS
     v_hex   VARCHAR2 (1000);
  BEGIN
     FOR i IN 1 .. LENGTH (p_string)
     LOOP
        v_hex := v_hex|| '%' || LTRIM (TO_CHAR (ASCII (SUBSTR (p_string, i, 1)), 'XX'));
     END LOOP;
     RETURN v_hex;
  END;
  

  cl := 'cmd /c start iexplore.exe "http://9.35.32.205:7777/forms/frmservlet?pageTitle=Trial Mail Reporting&config=TTMSMENU&form=./forms_test/TrialMailReporting&otherparams=p_prospect=X110679&userid='||to_hex(v_conn)||'"';
  

• Ayuda client server

  Hola amigos tengo hacer una cominicacion as client server TCP/IP, puedo hacer communication is y show en both docking UN arreglo booleano, pero quisiera poder control el arreglo desde ambos extremos hired el proyecto as tengo, lo hago are in el servidor tengo unsa series of switches, that al presionarlos en el arreglo UN lights led, y también en el client lights pero quisiera poder también encenderlos desde el client.

  Hola

  The client-server config you permite hacer UN básicamente ask y desplegar information, (ver este link)

  Are examples with the comunidad donde varios you sugiero buscar todo lo what can, como el EPICS Client & Server

  Saludos

• Client/Server simple Bluetooth on the same machine

  Hi all

  I have a simple question about Simple Bluetooth Client/Server example. Perhaps the answer is obvious and I'm just a fool, but nothing is written about it in all subjects I've read:

  Simple Bluetooth Server.vi and Simple Bluetooth Client.vi may be running on the same computer?

  Hi Frax,

  the device you want to connect with and the pc must be different, because the communication works with address and I don't think he'll like use the same address for the server and client...

  Problems to use this example?

  It will be useful,

  Let me know!

  FBM

• We have the assurance of software on the operating system server & CALs client server. License expires in June 2013. expires in June 2013. We need to exercise our upgrade to licences before June 2012?

  Original title: Software Assurance

  We have the assurance of software on the operating system server & CALs client server. Our agreement expires in June 2013. Do we need to exercise our upgrade to the licenses before 2012 June?

  Hello

  Thanks for asking this question to Microsoft Community.

  I suggest you check the Microsoft Software Assurance Web site for assistance.

  http://www.Microsoft.com/licensing/software-assurance/default.aspx

  Software Assurance FAQ:
  http://www.Microsoft.com/licensing/software-assurance/FAQ.aspx

  In addition, you can contact support by calling team: 800-936-3500.

  Hope this information helps.

• Error: Failed Application path: C:\Program Files (x 86) \Trend Micro\Client Server Security Agent\HostedAgent\svcGenericHost.exe

  original title: genric hosted agent services

  Description

  The failing Application path: C:\Program Files (x 86) \Trend Micro\Client Server Security Agent\HostedAgent\svcGenericHost.exe

  Signature of the problem

  Problem event name: APPCRASH

  Application name: svcGenericHost.exe

  Application version: 3.5.0.1163

  Application timestamp: 4d9d3841

  Fault Module name: StackHash_0a9e

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception code: c0000005

  Exception offset: 74676c9c

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Additional information about the problem

  Bucket ID: 2507689456

  Maybe you shouod check with Trendmicro support.

  http://eSupport.trendmicro.com/en-us/default.aspx

• LabVIEW DSC Client\Server application. How to install the executable on the client.

  Hi all

  I'm currently programming an Client\Server application.  The server application must host shared variables, and the client application must read.  The client application reads the shared variable in the indicator of their connection with the properties of the indicator.  I started programming and the client application and the server are in the same project.  In the client application I am lie the indicator to the library in my project that has the "My Computer" as the address.  My question is how do I tell the executable installed on any computer, that I wanted to use the variables shared on the server?  I have LabVIEW 2009 DSC.

  Thank you

  If by "data binding", you hear the Variables defined on your computer, then Yes, unless you want not linked to new variables on each executable, in this case here is an example that can help.

• DHCP client/server problem

  I have no idea how fix this DHCP client/server

  Log name: System
  Source: Microsoft-Windows-Dhcp-Client
  Date: 2010-06-02 17:00:03
  Event ID: 1002
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer:
  Description:
  The IP lease 192.*. * *. * for the network card with network address * has been denied by the DHCP server 192.*. * *. * (the DHCP server sent a DHCPNACK message).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1002
      0
      2
      0
      0
      0 x 80000000000000
     
      114138
     
     
      System
      *********-PC
     
   
   
      192.168.1.2
      001E33C2F0C5
      192.168.1.1
   
  

  Hi npgunner,

  1. What is the problem you are having DHCP client\server-related?
  2. What type of internet connection do you use?

  Renew the DHCP client lease

  The IP address of this computer is the same IP address used by another computer on the network. No user action is required. The DHCP client will attempt to get a new IP address from the DHCP server.

  To perform these procedures, you must be a member of theAdministrators group, or must you have been delegated the appropriate authority.

  If you do not want to wait the customer make its automatic renewal attempt, you can manually release and renew the IP address of the client as follows:

  1. on the active DHCP client computer, clickStart, in Search typecmdand press ENTER.

  2 typeipconfig/release, and then press ENTER.

  3. typeipconfig / renew, and then press ENTER.

  Check

  To verify that the conflicts have been resolved:

  1. on the active DHCP client computer, clickStart, in Search typecmdand press ENTER.

  2. to verify a DHCP client lease, typeipconfig/all to view lease-status information.

  3. the output of theipconfig command should show an IPv4 or IPv6 address marked "favorite."

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Sync phone to PC Client/Server applications use what security group to access the files on PC Win 7

  Programs of client server that connects to the computer from a phone and store data on the PC as the synchronization programs have what user ID and are able to write to the disk by security group file permissions. Users authenticated Internet Explorer, system, administrators, customer ID current user appears on the phone and must be enabled (admin) and the password entered to connect.  If the customer is logged as administrator? How can there be two users with the same user id?  One by the PC and the other on the phone.  If the phone connects the PC as a user in this group what id permissions?

  Question 2: If I agree a technician to fix it to my PC and fix it, what is it connected as? and what group permissions is using?  How to protect against the connection later?

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home