Oracle Client/Server Interoperatable Matrix

Similar Questions

• where to find the download for 11.2.0.4 Oracle client, Server Windows 2012

  Hi all

  I was instructed to install 11.2.0.4 32 and 64-bit clients to Server Windows 2012.

  I can't find the download page for the latter.

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=535798508932133 & ID = 1231433.1 & _afrWindowMode = 0 & _adf. CTRL-State = 8qqh4jwyv_58

  States that, fortunately, we can now use 11.2.0.4 32/64 bit client with 2012 (but does not tell us where!)

  So will OTN...

  http://www.Oracle.com/technetwork/database/Enterprise-Edition/downloads/index.html

  I don't see anything for 11.2.0.4 it - only 11.2.0.1, but 11.2.0.1 is not supported in Windows 2012

  
  

  Please, if anyone can direct me to the right page, I would be really grateful.

  
  

  DA

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=539595172570209&ID=1454618.1&_afrWindowMode=0&_adf.CTRL-State=jt8f7go3i_142#aref_section21

• Best Universal Oracle Client

  Hi friends,
  
  We have different versions of databases 9i, 10g, 11g, etc. on unix and windows servers.
  
  I want to install on my computer laptop oracle client that accesses all oracle databases. Is - this client 11g? or client 10g?
  I read something before that customer 10g is more stable and compatible with all versions to 11g?
  It is still true today?
  
  Thank you very much
  
  MsK

  Can be a little more specific on the release of accurate database that you are using? There is quite a difference between a non patched 9.0.1 database and a 9.2.0.8 fully patched database when it comes to compatibility of the client.

  MetaLink 207303.1 is the Client / Server compatibility matrix.

  A customer 11.2 is compatible with a 11.2, 11.1, 10.2.0.2 or group of later patches and a 9.2.0.4 or highest group of hotfixes. It is not compatible with a 10.1 database
  A 10.2 client is compatible with a 11.2, 11.1, 10.2, 10.1, or 9.2.0.4 or higher fixes group

  If you need to connect to a 9.0.1 are, you would need to go all the way back to 9.2 (10.1) client that is no longer available on OTN.

  Justin

• There is a matrix of Certification Oracle Client data provider?

  Hello

  Does anyone know where to find a Certification Matrix to know what Version of Oracle Client supports what?  for example .NET version 4.5.1

  Best regards, Manfred

  Hello

  From your tip in the Document, I found a releated link that helps:

  Supported by Oracle Data Provider (Doc ID 726240.1) configurations for .NET (ODP)

  Thank you

  Best regards, Manfred

• How to find if the Oracle client is installed or the server is installed.

  Hello
  
  How to find if the Oracle client software is installed or server software is installed on a linux machine.
  
  Thank you.

  Check the output of 'opatch lsinventory.

  If its database, the output would be as follows.

  Installed products of higher level (1):

  Oracle Database 10g 10.2.0.1.0

  For the customer, it would be

  Installed products of higher level (1):

  Client Oracle 11.2.0.1.0

• How to connect a client server Oracle BI BI data source

  Hi all
  
  How to access the DataSource BI the BI client server?
  is this possible?
  I have to configure tnsname.ora again?
  How to access the RPD to server? What is the logic behind?
  
  With respect,
  WP

  Administration of BI - RPD (were RPD is created) can access data using odbc and OCI.
  BI client - responses BI, BI Publisher.

  You can access the source data (domain here) i.e. content presentation of RPD... from BI answers, BI Publisher only after RPD is created.

  You can open the SPR online, to view the contents of the RPD.

• Problem ODBC Oracle client installation in Windows 2008 R2 64 bit...?

  Hi all

  I am facing a problem for ODBC drivers as I installed client Run-time Windows Server 2008 R2 64 bit. Client has successfully installed can't seem to connect to the server database using input TNS through Sql in my command prompt, but the problem is that I am not able to create all the drivers ODBC in Control Panel (ODBC Administrator) Am not able to find a driver to configure a data source.

  Using this data source, we need to connect to the database of an application.

  Could you please help me on this.

  

  Best regards

  Martin Raymond Vinay

  Raymond Vinay wrote:

  Hello Stevens,

  Thanks for the reply. I installed the client 11g r2 64 bit and I tried this too much C:\Windows\SysWOW64\odbcad32.exe

  As I said, the (sysWOW64) is for the 32 bit.  You say now that you have installed 64 - bit, so that it does not apply

  but he has not found drivers. I have not found any odbc folder in the oracle client home. Could you please suggest what to do next.

  Now, we know that you have installed the 11.2 customer.  As I say, the ODBC drivers are NOT installed by default on this version.

  And if you do as I said in my last post:

  a default installation, then go back and do a "custom" installation, by specifying the same ORACLE_HOME as before and by selecting the ODBC components.

  Best regards

  Martin Raymond Vinay

  Jr. Oracle DBA

  Miracle Software Systems Inc...

• Oracle.ManagedDataAccess.Client no Oracle client deployment

  Hello

  We are trying to deploy our application on a server that has no Oracle client installed. We use the managed dll dataAccess with entity framework 5. Our web.config file contains the following:

  < connectionStrings >

  < add name = "CroEntities" connection string connectionString="metadata=res://*/CroModel.csdl|res://*/CroModel.ssdl|res://*/CroModel.msl;provider=Oracle.ManagedDataAccess.Client;provider = & quot; DATA SOURCE =oracle; PASSWORD = password; PERSIST SECURITY INFO = True; USER ID = user & quot; "" ProviderName "/ >

  < / connectionStrings >

  < Oracle.ManagedDataAccess.Client >

  < version number = "4.121.1.0" >

  < dataSources >

  "" < alias dataSource = "oracle"descriptor ="(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = myhost.bc.ca) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = serviceName.bc.ca)))" / >

  < / dataSources >

  < / version >

  < /Oracle.ManagedDataAccess.Client >

  Oracle.ManagedDataAccess.dll is in our Bin folder.

  At run time, we get the following error: ORA-12541: TNS: no listener.

  The earpiece works very well. My thought is that something is missing in our configuration. When we add some debug information for the value of context. Database.Connection.Database we get empty string that make me think that the information in the configuration file does not in the run-time application.

  Any thought on what might be missed?

  Thank you

  Ken

  The XML tag should be . All lowercase. In your configuration file, you pulled profit some letters in the tag. It's probably why ODP.NET can't read XML.

• Huge success in Oracle HTTP Server for Application Apex

  Hello

  
  

  I've been running several applications in the same database in Apex 4.2.2. I use Oracle HTTP Server 10.2 for web access to customers. I have 4000 users in systems, but at the same time can be logged 500. Server Web is in DMZ, and database server's internal network. We notice that we conduct page huge hit in the system, very high. I noticed a client IP had 44 000 visits in one day and on a daily basis any number of access is 500 000 to 600 000. That is for me, it's huge. This huge success makes the firewall close the connection to the web server. This disturbance is causing the company a lot.

  
  

  I would like to know how Oracle Apex communicates with the web server and clients, is the mechanism of Oracle Apex which causes this huge success or is it for external cause, such as a DoS attack or something like that. I'm really exhausted with it. Don't know what to do. Help, please

  
  

  
  

  Hasan Al Mamun

  Hi I have kind of a resolved / by past the problem. Now, I have no connection to the bottom of the problem. The problem was. Subdomain (say myapp.testlab.com) of my app had a single IP address, router treated the huge success of the same IP address as a threat and that's why router blocked the real IP of this subdomain. We did it, we asked our dns provider to add a few more (5) IPs for the same subdomain. Now, as dns selects a single IP among 5 fps in alternating single IP does not get as much success as to be blocked by the router. It works better now. Cordially Hasan Al Mamun

• Doubt w.r.t. the Oracle client installation

  Hello

  We will install oracle client. We use oracle net services to configure essbase with the help of oracle, which is installed in the other database server. That is why we are installing oracle client.

  Now my question is during the installation exactly customized including all the checkboxes should I check. There are a lot of items displayed in the installation window. I want to know what should I check to install only oracle net services.

  Help, please.

  Go to the Administration of Oracle Client installation. Then copy the TNS server entry and paste it to the customer.

  Start access, the database of the customer.

  Kind regards

  Selvam.M

• create the database with Oracle Client link

  Hello together,

  on my machine Windows 7 with Oracle Client installed 12.0.1.0, I'm trying to create a database link to a database server, which runs on Oracle Standard Edition1 11.2.0.2.

  When I connect to sqlplus on the client with "sqlplus/nolog" and type the command:

  SQL > create SID of the database link

  connect to the user identified by passwd

  using "tnsnames.ora connection."

  I have a SP2-0640: not connected. OK, it is clear, because I use sqlplus with option/nolog. But client-side normally I have no database, where I can connect. So I think, there is no user, or?

  The database to which I want to connect is located in tnsnames.ora.

  Generally: Is it possible to use the Oracle Client to create a database link? Maybe there's another way to do this?

  A big thank you and best regards,

  David

  You don't seem to understand the concept of a database link.

  A database link connects two databases. Not a client and a database.

  You need to link up in a data source to a target database.

  The only thing you need is a client of sqlplus in sqlplus client, you need to connect to the source database.

  If you can't connect to the source database, you must present the statement to someone.

  Sybrand Bakker

  Senior Oracle DBA

• How to find the name of the Oracle database server?

  People,

  Hello. I installed Oracle Database 11 g 2 OS Oracle Linux 5. The installed directory is/home/user/OracleDB_Home and/home/user/OracleDB_Base.

  Host name is "mylinux". Name of the database instance is PT853.

  I use "mylinux" as the name of the database server, it does not work. I use another way to do as below:

  Export ORACLE_HOME = / home/user/OracleDB_Home

  Can I use "mylinux ORACLE_HOME" as the name of the database server, it does not work either.

  
  My question is:

  How to find the name of the database server Oracle with Oracle Linux 5 OS?

  
  Thank you.

  You must learn the basic of database Oracle.

  Please don't regard it not same as SQL server in terms of configuration.

  You never specify the database server name in Oracle.

  You specify the host name in only two places, 1) Tnsnames.ora/JDBC/ODBC (or any client you want to connect) and listener.ora) 2.

  There was nothing called specify the name of the Oracle database from an oracle database server.

  Concerning

  Anurag.

• DNS settings to the Oracle Linux server

  Hi all

  I have windows server 2003 dns and Oracle linux server 5.3

  How can I resolve ip or add it as a DNS Server 2003 client.

  I need to create RAC installation. to test the object.

  The ip address of the DNS 192.168.31.5

  Node1 ip is 192.168.31.2

  Node 2 ip is 192.168.31.3

  Please suggest.

  Thank you

  Hello

  This is actually a question of Windows Server. This is the official documentation for adding a host in DNS in Windows Server:

  http://TechNet.Microsoft.com/en-us/library/cc779029%28V=WS.10%29.aspx

  For a 2-node Oracle RAC, you must:

  2 public IPs, you already have these:

  192.168.31.2 Node1

  Node2 192.168.31.3

  2 virtual IPs, for example:

  Node1-vip 192.168.31.12

  Node2-vip 192.168.31.13

  address 1 scan resolve in 1 or more IP addresses, for example:

  n scan 192.168.31.14, 192.168.31.15, 192.168,31.16

  (3 addresses are default, but 1 will be perfectly fine for a cluster 2 node test)

  All these above must be in the same subnet.

  Finally, you can add interfaces private to the DNS also, but this is not necessary if, for example:

  Node1-priv 172.16.31.2

  Node2-priv 172.16.31.3

  Note that the private interfaces must be on a subnet differenet.

• FDM 11.1.2.3 issue (32 or 64 Bit Oracle Client)?

  Hi all

  I installed FDM 11.1.2.3 under Windows 2008 Server using Oracle Database 11 g. Its configuration is complete, but I do not create an app and having 'database connection' errors. In a version previous (11.1.2.2.) said that the FDM to use 32-bit Oracle client is installed. But 11.1.2.3 documentation that I did not found anything related to it and using the installed Oracle 64-bit Client.

  Could someone tell me if the FDM 11.1.2.3 requires 32-bit Oracle client is installed?

  Thank you

  Should be included in the Guide of DBA of FDM

• Client/server JavaFX, how FX can do server-side?

  So I am ultimately design a client/server application. Now, I'm curious to know how FX itself can do.
  
  I know that Java EE is the server side of the platform, while that for the client side (right or...?) so I was curious to know how FX fits inside, just like a RIA (Rich Internet Application).
  
  I have seen examples such as the application of DataApp that uses the resources of the ERA with JavaFX, so I'm curious to know how, if any, limitations exist for FX.
  
  
  The reason I ask is because I'm trying to know where to start with EE and there is so much information it is overwhelming, and I have no idea where to start. It seems that there are a ton of "JSR" for different tasks, and I don't know exactly what I need and that, so I'm really confused: (all.
  
  Any ideas of how I should go about it would be appreciated.
  
  Thank you
  
  ~ KZ

  Ignore the JSR for now.

  Follow the JavaEE tutorial.
  http://docs.Oracle.com/javaee/6/tutorial/doc/

  The answers to many of your questions will be clear to you when you've completed the tutorial.
  -----------------
  I also like the tutorials here (they are a little dated, but still topical for most as the core of JEE6 specifications that the tutorial relies on have been released 5 years ago and JEE7 has yet to be published).
  https://Schuchert.wikispaces.com/EJB+3+and+Java+Persistence+API
  ------------
  zonski has a targeted spring + javafx tutorial if you prefer to learn and to use spring than JEE (they are different technologies, which cover roughly the same functional game):
  http://www.zenjava.com/series/building-JEE-applications-in-JavaFX-2-0/
  -----------------
  JavaFX is a setting aside of client, so there is not a lot that you would do with it on the side server.
  ----------------

  It seems that there are a ton of "JSR" for different tasks, and I don't know exactly what I need and that, so I'm really confused all

  Nobody needs JEE, just use the pieces that you want that are a good target for any project you do - do not try to use everything at once.
  Many things can be learned and used on its own.

  Some relevant topics, perhaps (in the order I would consider them):

  Persistence: http://docs.oracle.com/javaee/6/tutorial/doc/bnbpy.html
  Java Servlet technology: http://docs.oracle.com/javaee/6/tutorial/doc/bnafd.html
  Web services JAX - RS: http://docs.oracle.com/javaee/6/tutorial/doc/giepu.html
  Contexts and Dependency Injection: http://docs.oracle.com/javaee/6/tutorial/doc/gjbnr.html
  Enterprise Beans: http://docs.oracle.com/javaee/6/tutorial/doc/bnblr.html