Is it possible to connect CLI without Ganymede?

Similar Questions

• Satellite L850 - is possible to connect two monitors external simultaneosly

  Hi, I have a L850-150 and I would like to know if it is possible to connect two monitors external simultaneosly, one by Hdmi and the second by Vga to enjoy an installation of three active screens (including the laptop screen). Im trying to figure out how to do without using a USB to adapter vfga or a Matrox dualhead2go.

  I want to use the outputs existing.
  Thanks in advance

  Some laptops supports a dual output: for example the Qosmio X 500 as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

  But for Satellite L850 this isn t possible.
  But you can use an external device, such as Dynadock
  http://www.Toshiba.com/us/ACC-dynadock

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• Is it possible to connect remotely on another computer of mine?

  I HAVE TO WOUNDER, IS IT POSSIBLE TO CONNECT REMOTELY ON ANOTHER COMPUTER OF MINE?

  THE THING IS, I WANT TO BE ABLE TO ACCESS GUEST ON ANOTHER COMPUTER IN MY COMPANY.
  THE PROBLEM IS, THE FIREWALL IS ENABLED ON ALL COMPUTERS, AND SINCE I AM NOT ALLOWED TO ACCESS, I CAN NOT TURN OFF.
  SO, IS IT POSSIBLE TO ACCESS OTHER COMPUTERS OF MY, DESPITE OTHER FIREWALL COMPUTER IS TURNED ON, WITHOUT A USER ON ANOTHER COMPUTER TO KNOW?

  I NEED TO USE CMD. EXE ON THE REMOTE COMPUTER, WITHOUT USER ON THIS COMPUTER TO FIND OUT.

  YBY

  original title: REMOTE CONNECTION

  You cannot connect to another PC remotely if the firewall is configured to refuse the connection.  Why do you want to work around the security of the other PC?  That seems not very friendly for me.

• Is it possible to connect Win 8, 8.1 language unique to the domain server.

  Original title - Win 8, 8.1 single language...

  Dear team

  It is possible to connect the victory 8, 8.1 language unique to the domain server or not.

  If so please share me the details for the same thing...

  Hi Arnaud,.

  Thanks for posting your question in the Microsoft Community Forums.

  A domain is a group of the PC network that share a common database and security policy. Computers can be on different LANs. A COMPUTER administrator runs the estate as a unit with rules and common procedures. One or several PCs on a domain's servers. Control of security servers and permissions for all computers on the domain. This makes it easier for an admin, IT changes because the changes are automatically made to all PC.

  Windows Pro 8 and 8.1 of Windows Pro allows you to join a domain so that you can connect to your company or school network. PC running Windows 8.1 or 8.1 RT Windows cannot join a domain.

  Domain users must provide a password or other information of connection whenever they have access to the field.

  If you have a user account on a domain, you can connect to any PC on the field without needing an account on this PC. You can probably make only changes limited to a PC settings because IT admins often want to keep network PC compatible.

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• Is it possible to connect an external drive Thunderbolt 2 to a USB equipped MAC Tower?

  Is it possible to connect an external drive Thunderbolt 2 to a legacy equipped USB MAC Tower?

  No, currently the Thunderbolt must be integrated with the system board.

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• Is it possible to connect my iPhone or iPad to Toshiba 42L7453DB

  Hi E1

  is it possible to connect my iPhone or iPad for my Toshiba 42L7453DB 42 "via wifi
  If I could someone let me know how please

  Kind regards
  Task001

  My Toshiba TV has built in WIFI and I can't test it.
  Have you already checked Media Player HD for TV Toshiba

• Is AT200 - possible to connect USB devices?

  Hi all

  I bought last week a Tablet AT200-100 (in Spain), and a few days ago I also bought an adapter for USB cable for it. I've seen (at least that is what I understood) that it is possible to connect devices to the Tablet (as a host).

  Well, I tried with two cables different and two different pills (I went back one and got another), and I can't get it to work.
  I hope you can help, maybe I'm doing something wrong...

  I used a micro USB B (plug) to USB (plug) adapter, and I tried to connect a USB keyboard, mouse and an external hard drive. Everything seems to work, nothing doesn't appear on the screen, and nothing new appears in the file manager. The light devices has never lit at all.

  Is it necessary to install something before? To activate something?
  I use a bad cable?

  Help, please!

  Thanks in advance!

  Hello

  The AT200 seems to be equipped with a USB port of microfiber that support OTG technology.
  Allows you to connect the key USB and HID (keyboard and mouse).
  This port is USB 2.0 compliant.

  To connect a USB (memory flash USB, keyboard or mouse), you must use a cable OTG (USB On-The-Go). The cable must be certified USB ON-THE-GO.
  http://en.Wikipedia.org/wiki/USB_On-the-go

  PS: this Tablet does not support a printer and as I know the operation of the port of USB devices was not confirmed for some USB devices may not work correctly.

• I found a 5G iPod today. I have restored on WiFi, but to activate it needs the owner previous email Apple ID and password to activate. I have no idea who is the former owner. Is it possible to activate it without the Apple ID?

  I found a 5G iPod today. I've restored on WiFi, but to activate it, I need the owner previous email Apple ID and password. I have no idea who is the former owner. Is it possible to activate it without the Apple ID?

  No.; locking activation is a measure of protection against the vol. bring it to your local police station or to post notices autour where you found it.

  (140507)

• Re: Satellite L300 - is there a possibility to connect with TV?

  Hello.
  I want to apologize for my English. It is not my mother tongue.
  When I bought my laptop, I didn't think the connection of it with TV. And that is why I do not pay attention to the lack of HDMI or DVI connectors on my laptop. Maybe someone knows if there is a possibility of connection to the TV. The laptop has only the VGA connector (to connect and an external monitor), microphone, USB connector and Express card slot. My TV (Toshiba AV500PR) has no VGA connector. AR the least VGA connector on it has a description it's a service connector.
  But the main problem is sound. The output signal can be get from microphone connector.

  I hope that someone has already solved this kind of problem.
  Thanks in advance.
  Alexey

  I agree with sanremo. You should buy a VGA adapter cinch set a local computer retailer. Then, you can connect your laptop to the TV.

  I have a Satellite L300 too and the VGA adapter cinch set works perfectly.

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• Tecra M5: Is it possible to connect two monitors?

  Hello

  Is it possible to connect two monitors the Tecra M5? Is it possible through the port replicator, perhaps by a split of dvi output or a dvi, one on the vga monitor. I want to divide between the two monitors.

  At soon now
  Iain.

  Hello

  No, it's not possible to connect two external monitors.
  If you want to split the screen, you can use the extended desktop option.
  In display properties, you will find the option to extend my desktop on this monitor. You must select the second monitor and activate this option.

• Is it possible to connect the Qosmio F60 - L10 with a docking station?

  Hello

  is it possible to connect the F60 - L10 with a docking station? I would to connect to the docking station, a monitor and a peripheral such as a printer and a LAN cable.

  Thank you.

  Hello

  You cannot connect Qosmio for docking station because Qosmio includes not all ports docking at the bottom of the unit. Have you seen one?

  But you can buy a [Dynadock | http://eu.computers.toshiba-europe.com/innovation/generic/Dynadock_EMEA_0107/cnt/GENERIC/key/Dynadock_EMEA_0107/banner_id/Q3_DYNADOCK_SM_TEG_0107] Toshiba.

  The Dynadock can be connected to computer laptop s USB port.
  Google a bit for Dynadock. There are different models on the market

  Welcome them

• Sat M60: Possibility to connect the external keyboard?

  is it possible to connect a keyboard external usb to a satellite M60? what I need to change the bios settings?

  Thanks in advance
  Marco

  Hello

  I n think that it of necessary to have admin rights.
  You can use an external USB keyboard with no problems.
  But if you want to use the keyboard USB under Win NT USB emulation (or something like that) option in the BIOS must be enabled.

  Good bye