Is it possible to cut a video as an image, just to have the central part of it?

Similar Questions

• a window said "flight simulator does not work with your video card. Make sure you have the latest drivers installed for your video card.

  Flight Simulator X not would allow me to get it because it says I need to update the video card. I think the problem was that I finally erase all memory of the computer using a special cd, because once I have done this and downloaded the software again, it stop working

  Hello el 24, welcome.
   
  There are a few possibilities as to why you see this message. There is a chance that you do not have your drivers graphics/display installed or configured correctly.
   
  We will need to know the brand and model of your computer to properly route you to the right path.
   
  Once we have this information, we can see if we can provide you a link to the Web site of the manufacturer of your PC to download the driver.
   
  Let us know,
   
  Thank you!

• is it possible to reinstall windows without disc xp.home, if I have the activation key

  I had a virus on my desktop pc and need to reinstall windows

  Hi ydnameom1,
   
  You must have a Windows XP installation CD.
   
  If you have lost or misplaced your CD, you can contact the Support team customer Microsoft to obtain a replacement copy.
   
  For more information, see:
  How to replace Microsoft software or hardware, order service packs and replace product manuals
   
  To keep your computer clean and away from the attacks of viruses or malware, try to use the scan of Microsoft Security. It could even save to reinstall the operating system.

• Is it possible to image export batch have the same area?

  Hi all

  I would like to batch export a set of images that are a mixture of landscape, portrait and everything in between.

  I wish that the exported images to be roughly the same size (meaning, roughly the same area).

  Is there a way to do this?

  I guess export by "Megapixel" is the way to go - but then my problem is that seems to require at least 1 megapixel to the exit and I need them smaller.

  Any suggestions?

  I guess I could export in megapixels, then import them those, and then export again by percentage - but which means additional steps and probably also lower the final IQ.

  Thanks in advance for your suggestions!  -Scott

  As you already say it correctly. Limit for megapixels is exactly the way to go if you want the images to the whole region even regardless of proportions. Unfortunately, there is no way that I know off which allows you too put a number less than 1 megapixel here. You could try to edit a saved export preset in an external editor. Where are stored the people depend on your operating system and if you save presets along your catalog file. I just tried and you can fool Lightroom by accepting smaller than 1 million pixels that way and it seems to work fine. It apparently only checks the number when enter you the interface.

• How to cut a section out of a certain letter in the living text?

  

  As you can see from this image in InDesign, I want to have the last part of the skin of "N" behind this diagonal line. However, while it is hard to tell in this picture, the background color is a gradient, so that I can just do color box. Anyone know if it's possible to do? I want to keep the direct text, are not described if possible. Pathfinder does not seem to work.

  Draw a picture of hands on the top of this text box. Set it to no fill, no respect. Cut the block of text, select the new image, select "paste inside".

  

  (OT-thought #1).

  ... I did a picture to show you, but Jive is jiving place- new! Anyone else having problems? In IE9, Win 7, does not return the Return key, the cursor is sometimes upward and I cannot insert a picture - all I get is the error

  An error occurred trying to retrieve data from the server. Please try again in a few minutes. Error code: object does not support property or method 'createContextualFragment '.

  (OT-thought #2) F * IE. Switch to FireFox.

• Is it possible to cut the video in Encore CS4? What I am doing wrong?

  Hello:

  In the manual, I read that it is possible to cut the beginning of a clip (Encore CS4). In an old discussion , it seems that it is only possible to cut the time for still images and audio. I did as described in the manual, dragged from the beginning, but in the preview, 6 seconds I want to cut are still there. While dragging in the video part of the timeline, it changes Source in so many points. Nothing changes in the preview. I put Source in zero, the duration is reduced to what it should be, but still nothing changes in the preview. What I am doing wrong?

  I enclose some screenshots to illustrate better what I'm doing.

  I'd appreciate any suspicion.

  Alejandro

  Slide the clip cut to the left until the new point timeline timecode 00; 00; 00; 00.

  -Jeff

• MultiCam: first cut separates video and audio

  I have a question about something that has bugged me for a long time.  I do a lot of editing multicamera and after the first cut of the audio and video are not related and requires that each cut is made twice - once for the video and once for audio.  It's really annoying because if you forget and move the playback cursor, so cut you is out of sync and you have to redo it.

  Is it possible to keep the sequence bound to make less painful editing?

  Oh, I made a wrong assumption about what you were trying to accomplish.

  Since you're using A1 audio throughout, it is normal that all the video clips after the first are separated from the audio. It is at least in part because the audio track can be linked to a single video clip.

  This is therefore the first two options that come to mind

  1. hold Shift while clicking on the cutting tool.
  2. Move the playback cursor where you want the cut and press SHIFT + K (Win) or Cmd + K (Mac)

  In both case clips on all the tracks unlocked will be cut.

  According to exactly what you are doing, you might also find that working with In/Out points and the extract of Lift & controls offer an efficient workflow.

• Is it possible to display a video in a video?

  Is it possible to view two videos at the same time in FCPX?  For example a "display in a screen?

  I'm showing the action and someone explaining the action at the same time.

  Instead of having a physical screen beside the person (who does not work because of the flickering light) talk, I want to insert a brief appearance of a screen showing the action in the real video, next to the person talking. Or have the person who speaks in the "TV screen" insert a little in the part of the main action of the film.

  Is it possible; and if so, how?

  Yes.

  A place above more and reduce the top.

  Al

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• Is it possible to remove pictures/videos from the iphone and have yet to back them up in the iCloud?

  Is it possible to remove pictures/videos from the iphone and have yet to back them up in the iCloud?

  At the moment the iCloud synchronizes only with what is already on my iPhone.

  This article should help you remove photos from my photo - Apple Support stream

• Is it possible to cut the warning you get when you delete a photo?

  Is it possible to cut the warning you get when you delete a photo?  It slows down the process so when you have thousands of pass by...

  Use the combination of keys ⌘⌫ (ccommand - delete) to remove a photo from a time or an album.  That will move the photo directly on the album recently deleted without any question.

  But don't forget to check the album recently removed carefully before you clear, if you use this method of removal.

• Satellite A200 - its possible to change my video card?

  Hey,.

  I was wondering if its possible to change my video for a better card. I currently have the nVidia GeForce Go 7300 and its an integrated video card.
  But I don't know if this means that it is impossible to change it or maybe its possible to add an extra video card in the laptop (SLI).

  So is there anything I can do about it?

  No, because the GPU is soldered on the motherboard. Not possible to remove it!

• is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  Dear all,

  Need help :)

  1.

  is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  my customers will not buy TP - lic :)

  Topology:

  8900 (jabber) - CUCM-(SIP) - SX10

  2.

  Customer, have MCU machine.

  If not possible. is it possible, meeting point of MCU use?

  Topology:

  8900 (jabber) - CUCM - MCU - SX10

  1. Yes, but it is not that simple and straightforward that the SX10 can be reached by calling is the public IP address and CUCM does not support the IP address numbering is not a SIP address format...

  2. Yes, using the MCU would be much simpler, easier and, in my opinion, a better solution to be implemented. Here is an example of how a stand-alone SX10 could dial the IP address of the MCU standard automatic.

  You can also assign a SIP URI address to the meeting point which the SX10 can connect to.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Is it possible to put a video during running on the app or an image?

  Is it possible to put a video during running on the app or an image?

  You can't put a video instead of the boot image.

• Is it possible to separate a video stream into two video streams?

  I do not know how to ask this question with keywords, but I essentially have the opposite problem to superimpose two videos in one. I use OBS to capture a stream video computer game and a webcam to feed at the same time. However, my webcam stream is lagging behind my video stream of the computer. I want to reframe the section video (somehow) webcam and manipulate separately from the video game.

  Thus, the videos are superimposed by the SIB program

  

  I don't know if it is even possible to create and manipulate two videos of a video like this, but any guidance would be appreciated. Thank you!

  If I understand correctly, you want to keep the webcam shot overlay, but just change the "timing" to synchronize the webcam with gameplay, right?

  Equip your video clip V1. Put SAME clip V2. Apply the CROP effect to clip V2 and harvest all the 4 side down until you have just the small webcam PiP showing (disable V1 clip temporarily to see what you're actually cropping on V2).

  Now pass the V2 clip left or right on the timeline as necessary to implement synchronization with the V1 (gameplay) clip. Fact

  Thank you

  Jeff Pulera

  Safe Harbor computers