Is it possible to fix my drive hard seagate, when it crashes?

Similar Questions

• cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  Watch 746,39 instead of 3000 GB GB SATA drive, I used Assistant seagate drive but you get an error when you try to use the 'extended capacity manager' - version not supported for nVidia disk controller driver

  where can I get a supported nVidia disk controller driver version if they are available for my system, or windows 7 home 64 bit should recognize the drive anyway?

  thanx

  I just installed a pcie sata II raid startech.com controller, after a slight problem installing the driver, on the third attempt, windows saw the full disk disk management

• E3000 can support 4 TB drive hard seagate ST4000DM000

  Hello, I got a new drive hard seagate 4 TB ST4000DM000.

  I try to use it on my Ver.1.0.04 E3000 (version 6) thanks to a hard disk USB 3.0 enclosure, but it failed.

  The router nothing posted on the webpage of storage, the pilot are not not in the table of USB storage device.

  so I formatted the drive on my laptop windows 7, of course with TPG and a single partition.

  It is OK on my laptop now, but can still be found by the router.

  Can Linksys pass the E3000, so the router firmware takes in charge the TPG and the new 4 TB harddrive?

  The HARD drive may be too advanced for the E3000. The USB function on this unit has been tested to work only with the 1.5 TB. Here is the complete list of the tested on an E3000 USB devices. An update of the firmware is not likely to be released, either to improve the function of the DEVICE.

  It would probably be best to upgrade your router. Check out EA6300. This last router is equipped with a USB 3.0 port, ideal for your HARD drive.

• Preventivo parte di ricambio 7CV6H - drive HARD Seagate [CF]

  Buongiorno. We have a server PowerEdge T420 con ServiceTag 7V0PG5J disco cui if e rotto of United Nations in mirroring.

  Few need di UN preventivo by part 7CV6H, drive HARD Seagate SAS 15 k rpm 300 GB model ST3300657SS

  Speaking saluti,

  Andrea Casati

  Buongiorno, the sto contattando by mail.

• New drive hard "Seagate ST2000DM001' has not detected by my computer, Windows 7

  Original title: missing HARD drive

  I added a ST2000DM001 Seagate 2 TB drive to my computer.  It appears in the Device Manager and BIOS.  It appears as "Disk 1" in computer Mgnt, but the volume is not displayed.  The drive does not appear in my computer.

  I can not format or assign a letter to the secondary drive.
  I updated the Firmware of the drive HARD w / Barracuda-ALL - GRCC4CD.exe.
  What should I do to access the 2 TB drive?
  System Specs:
  Windows 7 ultimate (64 bit)
  MSI x 58 Platinum SLI w / BIOS v. 3.9 (2011-01-28)
  Intel Core i7 920 @ 2.67GHz
  6 GB OF RAM
  Disk 0 - ST3160023A-RK Seagate 150 GB (Ultra ATA/100 w / SATA Adapter)
  Disc 1 - Seagate 2 TB ST2000DM001

  Hello

  Have you made changes on the computer before this problem?

  I suggest you follow the methods and check them off below if it helps.

  Method 1:

  Try the troubleshooting hardware and devices running tool and check.
  Reference: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:

  Check your hard drive for errors:
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
   
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  
  Method 3:
  
  Initialize the disk in disk management.

  Create and format a hard disk partition : http://windows.microsoft.com/en-US/windows7/Create-and-format-a-hard-disk-partition

  Note: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Method 4:

  Try to connect with another computer and check if it helps.

  If the problem is still persist, then it would be best to contact Seagate for further assistance.

  Seagate Support: http://www.seagate.com/www/en-us/support/

  Hope the information is useful.

• new drive HARD Seagate Barracuda not recognized in the BIOS

  Hello

  The Inspiron 530 desktop computer BIOS does not recognize my new HARD drive. It's a Seagate Barracuda 500 GB (ST3500413AS). I try to reinstall Vista, but installation can't find a drive with 3.9 GB. Wrong type of drive in the BIOS found, I think that.

  Tried several things, but no results: check the BIOS, but with automatic selection drive only to find a 4 GB (wrong type), updated the BIOS drive (now 1.0.18), tried several drivers with startup etc.

  Think I need a good driver, but on the site Web of Seagate, they say that there is no firmware for this drive.

  can someone help me?

  THX, David

  Thanks for all the support.

  It wasn't a problem with the SATA 3 or something like that, but the HARD drive was missing. There is no other choice. Come back with my HARD drive (and information) to the store and finally got a new. I hope that the other works :)

  THX and greetings

• Why my windows 7 installed on drive hard Seagate IDE goes into blue upon awakening from sleep screen while everything goes well when I installed it on the SATA hard drive.

  I did a Chkdsk/f/r hard disk and no errors not found. Is it because of the incompatibility of your IDE hard drive with windows 7 or other?

  Hi Auggy,

  I could not roll back the driver for GIGABYTE GBB36X controller, instead, I uninstalled the driver and now the problem seems to be resolved.

  There will be consequences if I ever install the storage controller driver and what is the use of the controller driver?

  Thanks for the comments.

• drive hard Seagate usm is not recognized by the computer.

  Windows 8 does not recognize my portable hard drive Seagate USM when I insert into the computer Bay USM.  The computer is a new Lenovo K450 Windows 8.

  Thanks Ronnie,.

  I contacted Lenovo on the K450 and they said that their computer would only recognize drives of 500 GB USM and mine are 1 TB.  I asked if he would support the discs from 1 to 2 to in the future and they said that it is not in their plans.  Meanwhile, my Seagate drives will connect via cable USB3 Lenove USB3 ports.

  Ken

  I have a K450 and thought the slot of USM was in not recognizing my Seagate Backup more 1 TB drive as well.  Then I found another similar post elsewhere and the solution is to enter the upper part of the computer and push harder!  It feels as if it was there when it really is not completely.  My 1 TB works fine now.  No idea why someone said there is a limit of 500GB.

• need to reformat the drive hard after that installation fails

  After several futile attempts to update my computer and I couldn't was the first get the bad image of SLIU.exe error, I tried ccleaner, malware nothing has worked, so I decided to do a reinstall = so I have inserted the windows cd and started doing an installation, but it would not install service pack 1 not even the stand-alone version.

  so I decided to install win 7 again and got a corrupt c:\windows.old.001\windows\servicing\sessions file setup.exe is corrupt and unreadable, please run chkdsk utility

  executing the ckdks and now he says it's error correction in the index file $SII 9

  I want to just reformat the drive and do a fresh install.

  the drive hard seagate [passed all test

  What is the step by step to reformat the hard drive

  I have an external hard drive with all my backup files. that I don't worry, I want just the computer working again.

  Plug

  Home build

  Win 7 ultimate

  card mother p45 MSI neo

  4 GB corsair ddr d

  1 TB of Seagate hard drive

  Intel dual caore 8400 cpu

  NVIDIA g8400 video card

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• Possible to install the second hard drive in the p6110f Pavilion

  Is it possible to install a second hard drive, 1 TB Seagate, in the expansion on my Pavillion p6110f slot?

  Hello

  Your PC has a hard drive cage which will host two disks.  This how-to - HP document from removing a hard drive will show you the process to remove the hard drive cage.

  If you want to continue using the Expansion Bay then you will need a 5.25 "to 3.5" adapter support. NewEgg.com would bring such a support.  You also need a SATA data cable.  This how-to - HP article will give you an idea on how to use Expansion with a 5.25 device Bay ".  Check by the optical drinve for a spare SATA power connector.  If it is not available, then you will need to use a SATA power splitter.

• Drive hard internal not found to fix this problem, try reinstalling the drive

  So I get the error message: internal hard drive not found to fix this problem try reinstalling the drive

  Once I got the error, I removed my 1 TB HARD drive and replaced by a 525 GB SSD and I still get the error. After testing the original 1 TD drive HARD, has nothing wrong with him, so it seems to be something wrong with the computer itself.

  I ran the PSA test and it does not detect any problems with the hard drive and no other errors.

  What could be?

  Edit: I have the Dell XPS 15 9530

  The fixed. The BIOS has been updated with virtualization, so we turned off and also removed the SSD of 32 GB.

• is it possible to see EVERY folder and file that exists on the drive hard on one screen and in one place just as you could do in much older versions.

  OK... so I had an accident and there was good and bad news... the good news is that I was able to get it started and running "Save", but the bad news is that instead of giving a new image system clean (as I expected), I had a bunch of random pictures and other unimportant things and many important things seems lost but I think that its still all somewhere.

  now... to the front sometimes there was a windows program called "windows explorer" that would put all folders and all files that was on the hard drive on a single screen, and you can search through them.    When I shoot to the top of the Explorer windows on win 7, I get a page with a bunch of files minor that some things in them, but not what I see already...

  so... my question is simply "is it possible to see EACH file and a file that exists on the drive hard on one screen and in one place just as you do in earlier versions.    I did some research and went thru records that he will show me but I explicitly want is to see EACH file and folder that exists on one screen...

  is it possible in win 7?   and if so, how, please

  Steven

  Steve,

  Are you talking about the Windows Search function?

  In Windows Explorer, open the top-level folder that you want to watch in [C:\Users\yourusername\Documents or whatever it is you want] then look in the upper right area - there is a white box to the right of the address bar.  This is the search box.  Type * and then pause and it lists all the files in this top-level folder down through its subfolders.

  You can find more information about using Windows Search in

  A Guide to using Windows Search; Two Alternatives to Windows - Wiki

• How to fix my drive WD Passport post hard to back up my Vista Dell, the passport acts differently and operates more fluid on my Windows 7 laptop.

  How can I get my Western Digital Passport external hard drive (model # wd10000H1U-00) to back up my Vista Dell Inspiron 530 desktop computer. I used the Passport to back up my Windows 7 laptop and it (passport) has worked. He has been able to back up my computer laptop windows 7. It's easy, simple and convivial. How ever, when I tried to back up my Dell Vista computer, it's another story. I don't have a smooth and friendly process by backing up. To this day, I can't get the Passport to back up my Dell Vista computer. I need to this backup will take place, for I'm going to re install my Vista os again. Any suggestions?

  Check your drive hard http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors

• HP Pavilion DV6-3041TX drive HARD failure and possible design Intel series 6 Chipset problem

  Hey guys

  I saw corruption serious hdd on my system for some time now and was just move to replace the drive hard when I came across the problem of design of Intel® chipsets. Now, I think that my system is the range of serial number for this question and as the current drive does not start, I can't check the Device Manager to see if the chipset is one of those affected.

  Is there anyway for me to check this from a USB bootable or something similar, because I don't want to have to go through the effort to replace the hard drive and reinstall windows just to find the chipset is wrong?

  Thank you

  (Now, this is my first post on the forum if I appoilgise if I've got this in the wrong place)

  Open the door of the memory on the bottom of the laptop and look under the memory for a number of motherboard.

  You should have the Intel HM55 chipset, but we can be sure that if we know the motherboard part number.

  You should have one of these two tips:

  630281 001
  615281 001