Preventivo parte di ricambio 7CV6H - drive HARD Seagate [CF]

Similar Questions

• cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  Watch 746,39 instead of 3000 GB GB SATA drive, I used Assistant seagate drive but you get an error when you try to use the 'extended capacity manager' - version not supported for nVidia disk controller driver

  where can I get a supported nVidia disk controller driver version if they are available for my system, or windows 7 home 64 bit should recognize the drive anyway?

  thanx

  I just installed a pcie sata II raid startech.com controller, after a slight problem installing the driver, on the third attempt, windows saw the full disk disk management

• E3000 can support 4 TB drive hard seagate ST4000DM000

  Hello, I got a new drive hard seagate 4 TB ST4000DM000.

  I try to use it on my Ver.1.0.04 E3000 (version 6) thanks to a hard disk USB 3.0 enclosure, but it failed.

  The router nothing posted on the webpage of storage, the pilot are not not in the table of USB storage device.

  so I formatted the drive on my laptop windows 7, of course with TPG and a single partition.

  It is OK on my laptop now, but can still be found by the router.

  Can Linksys pass the E3000, so the router firmware takes in charge the TPG and the new 4 TB harddrive?

  The HARD drive may be too advanced for the E3000. The USB function on this unit has been tested to work only with the 1.5 TB. Here is the complete list of the tested on an E3000 USB devices. An update of the firmware is not likely to be released, either to improve the function of the DEVICE.

  It would probably be best to upgrade your router. Check out EA6300. This last router is equipped with a USB 3.0 port, ideal for your HARD drive.

• Is it possible to fix my drive hard seagate, when it crashes?

  Well my drive hard seagate ST3500620AS just crashed and I need to know if there is anyway to fix it now that it does not work. If not I can just replace it and what I do on all my OS?

  Danick says:

  Well my drive hard seagate ST3500620AS just crashed and I need to know if there is anyway to fix it now that it does not work. If not I can just replace it and what I do on all my OS?

  N ° you can not fix it.

  A hard disk for the average person crash means that everything on the hard drive has disappeared forever. There is always some Seagatefor someone with vast resources.

  I hope that you have created a set of HP recovery disks. If you did, then buy a replacement hard drive (500 GB or more) and put it in your recovery disc in the DVD player. Go into the BIOS and set the DVD drive as the first on the start list. Once you have done this, you can start your PC and use the Recovery Manager on the set recovery disk to reinstall your operating system.  If you have not created a set of recovery discs you can always buy a set of HP at a reasonable cost.

  Best regards
  ERICO

• New drive hard "Seagate ST2000DM001' has not detected by my computer, Windows 7

  Original title: missing HARD drive

  I added a ST2000DM001 Seagate 2 TB drive to my computer.  It appears in the Device Manager and BIOS.  It appears as "Disk 1" in computer Mgnt, but the volume is not displayed.  The drive does not appear in my computer.

  I can not format or assign a letter to the secondary drive.
  I updated the Firmware of the drive HARD w / Barracuda-ALL - GRCC4CD.exe.
  What should I do to access the 2 TB drive?
  System Specs:
  Windows 7 ultimate (64 bit)
  MSI x 58 Platinum SLI w / BIOS v. 3.9 (2011-01-28)
  Intel Core i7 920 @ 2.67GHz
  6 GB OF RAM
  Disk 0 - ST3160023A-RK Seagate 150 GB (Ultra ATA/100 w / SATA Adapter)
  Disc 1 - Seagate 2 TB ST2000DM001

  Hello

  Have you made changes on the computer before this problem?

  I suggest you follow the methods and check them off below if it helps.

  Method 1:

  Try the troubleshooting hardware and devices running tool and check.
  Reference: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:

  Check your hard drive for errors:
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
   
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  
  Method 3:
  
  Initialize the disk in disk management.

  Create and format a hard disk partition : http://windows.microsoft.com/en-US/windows7/Create-and-format-a-hard-disk-partition

  Note: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Method 4:

  Try to connect with another computer and check if it helps.

  If the problem is still persist, then it would be best to contact Seagate for further assistance.

  Seagate Support: http://www.seagate.com/www/en-us/support/

  Hope the information is useful.

• drive hard Seagate usm is not recognized by the computer.

  Windows 8 does not recognize my portable hard drive Seagate USM when I insert into the computer Bay USM.  The computer is a new Lenovo K450 Windows 8.

  Thanks Ronnie,.

  I contacted Lenovo on the K450 and they said that their computer would only recognize drives of 500 GB USM and mine are 1 TB.  I asked if he would support the discs from 1 to 2 to in the future and they said that it is not in their plans.  Meanwhile, my Seagate drives will connect via cable USB3 Lenove USB3 ports.

  Ken

  I have a K450 and thought the slot of USM was in not recognizing my Seagate Backup more 1 TB drive as well.  Then I found another similar post elsewhere and the solution is to enter the upper part of the computer and push harder!  It feels as if it was there when it really is not completely.  My 1 TB works fine now.  No idea why someone said there is a limit of 500GB.

• new drive HARD Seagate Barracuda not recognized in the BIOS

  Hello

  The Inspiron 530 desktop computer BIOS does not recognize my new HARD drive. It's a Seagate Barracuda 500 GB (ST3500413AS). I try to reinstall Vista, but installation can't find a drive with 3.9 GB. Wrong type of drive in the BIOS found, I think that.

  Tried several things, but no results: check the BIOS, but with automatic selection drive only to find a 4 GB (wrong type), updated the BIOS drive (now 1.0.18), tried several drivers with startup etc.

  Think I need a good driver, but on the site Web of Seagate, they say that there is no firmware for this drive.

  can someone help me?

  THX, David

  Thanks for all the support.

  It wasn't a problem with the SATA 3 or something like that, but the HARD drive was missing. There is no other choice. Come back with my HARD drive (and information) to the store and finally got a new. I hope that the other works :)

  THX and greetings

• Why my windows 7 installed on drive hard Seagate IDE goes into blue upon awakening from sleep screen while everything goes well when I installed it on the SATA hard drive.

  I did a Chkdsk/f/r hard disk and no errors not found. Is it because of the incompatibility of your IDE hard drive with windows 7 or other?

  Hi Auggy,

  I could not roll back the driver for GIGABYTE GBB36X controller, instead, I uninstalled the driver and now the problem seems to be resolved.

  There will be consequences if I ever install the storage controller driver and what is the use of the controller driver?

  Thanks for the comments.

• need to reformat the drive hard after that installation fails

  After several futile attempts to update my computer and I couldn't was the first get the bad image of SLIU.exe error, I tried ccleaner, malware nothing has worked, so I decided to do a reinstall = so I have inserted the windows cd and started doing an installation, but it would not install service pack 1 not even the stand-alone version.

  so I decided to install win 7 again and got a corrupt c:\windows.old.001\windows\servicing\sessions file setup.exe is corrupt and unreadable, please run chkdsk utility

  executing the ckdks and now he says it's error correction in the index file $SII 9

  I want to just reformat the drive and do a fresh install.

  the drive hard seagate [passed all test

  What is the step by step to reformat the hard drive

  I have an external hard drive with all my backup files. that I don't worry, I want just the computer working again.

  Plug

  Home build

  Win 7 ultimate

  card mother p45 MSI neo

  4 GB corsair ddr d

  1 TB of Seagate hard drive

  Intel dual caore 8400 cpu

  NVIDIA g8400 video card

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• Satego X 200 21U: drive HARD internal not external usable after upgrade

  First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.
  After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive is not usable in my extern Dockingstation.
  Does anyone have a good idea what causes this problem? The HARD drives are locking the entire system, if I try to access and some formatting.

  Hello

  What do you mean by is not usable in my external docking station?

  I assume that you have placed the 2.5 HARD disk in a USB enclosure that allows to connect the HARD drive to the computer USB port.
  Is this good? So what harm s? Is not recognized USB HARD drive or what?
  Have you tried to connect different computers HARD drive?
  Otherwise, to do this

  But if the HARD drive is not accessible, using the case of USB, or use inside the laptop, then I would say it is a HARD drive malfunction

  Why this is happening?
  The writing and the reading drive HARD is a physical process which underline the material parts such parts can still die

• How much is a new drive hard hp product number is NP211AA - ABA MODEL P6112P

  My Device Manager shows my hard drive as a

  Drive SATA TOSHIBA MK6476GSX im do not know the size but in my drive C is about 575 f tools GB and my D is 20.1 and hp 99 mb. im not sure if im suppose to add anyone to the top or through the drive c only.  Im trying to contact hp to see if they could replace my drive hard when it goes too hard to use but id like a starting on that price, so I know not if its more wise to do things fixed or shopping for a new laptop.

  I have a

  Pavilion laptop 2123us g6

  Product B5A04UA number

  Windows 7 64-bit sp1

  If you have activated the link to parts store, I've included it should show hard drives available for your model and prices for your area. If you prefer to fix it as a repair, then telephone HP support, please use the following http://www.hp.com/contacthp and create a folder for your question. Once your case is created, you should get the number to use to contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Either by the way, if you have only one hard drive installed which is the normal case, the size of your hard drive will be the sum of all partition sizes as well as all space not yet allocated.

  I hope this helps.

• New drive HARD & OS errors-> HP 8000 Elite Small Form Factor PC

  New drive HARD & OS errors---> HP 8000 Elite Small Form Factor PC
  
  Can not install Win XP on another hard drive
  
  I work with a...
  HP Compaq 8000 Elite Small Form Factor PC
  
  Original SATA HDD is loaded with Windows 7 Pro.
  
  In order to install a program using this PC as a digital video recorder
  I installed the video capture PCI card and related software. I had problems
  associated with software and Windows 7.
  
  I know that the software works with Windows XP.
  Do not want to remove the original HDD, I tried my win7
  to replace the HARD drive and do a clean install of XP.
  
  I get the same error during the installation of the OS.  I tried different
  SATA and different XP install disks.
  
  The error I get is shown in this photo.

  

  Original HP HARD drive is a Hitachi 160 GB
  
  I tried 2 known to be good SATA drives.
  Seagate 500GB
  WD 80 GB
  
  I checked the bios settings and even revenue tio rear BIOS
  default settings.

  I get this error even with everything I tried to do.

  This happens during the OS install just after or during the process of the installation of temporary files are current

  written to the HD.
  
  When I re - install the original HD loaded with Win7, everything works as it
  expected.
  
  Any ideas on what] s going on here?

  Hello:

  The problem is that you must incorporate the necessary sata ahci drivers for windows XP to see the hard drive.

  Has Windows 7 and XP is too old an operating system to make them.

  Read the info at the link below, section of Intel and then read the downloadable PDF document for instructions on how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The only other way to install XP on this model is to go into the bios, the storage section and change the setting of sata ahci to ide emulation, save the setting here and once again, when you go out.

  The problem is that if you do this, you cannot change the setting for the preferred setting of DCIS, unless you know how to install the correct ahci sata driver after installing XP from the controller.  If you try to just change the setting back on ahci without having to install the controller driver, the PC does not start upward.

  Try "slipstreaming" the drivers first and if you can't swing, install XP in IDE mode and I'll help you get the drivers installed, so you can change the BIOS to ahci setting.

• Pavilion 6610f desktop: HP Envy & WARNING: drive hard Imminent failure (please backup and replace immediately!)

  Recently, I had 2 different cats with HP Tech Reps in which they used their remote control programs to check on the problems that I had with my new HP Envy 5560 all-in-one.  The next day, at the start of my desktop PC, I got the warning message: "" imminent hard drive failure: if it please take a full backup and replace immediately. "" I did a scan from HP and it showed nothing wrong. There are no pop icons - up or whatever it is on my desktop screen to indicate a problem.  The hard Seagate I have is only 1 years and 89% free space left on it and there is no problem, other than being slow sometimes, before the cats remote and the PC warning.  I came to the forum looking for answers, and the first thing I noticed was a post to say today 09/04/2015 Bent Canuck: "HP Envy Hard Drive Failure" at 06:22. What a coincidence. Think are?  Only some 20 hours from the time I myself first 'hard drive Imminent failure warning' and only about 40 hours after the remote programs have been downloaded (twice) and the rep tech, taking control of my computer (twice).

  I ran all the diagnostics that my intermediate PC experience tells me to do.  I checked in the BIOS and I checked all the HP, troubleshooting, etc. on the Assistant HP program performance. I can find no reason for the hard drive to be failing.  I didn't notice it do anything else to be a little slow to start sometimes and slow to load stuff onto the internet, I have assumed it was probably malware and spyware that I must find a way to remove at one point, but I have received no warning about things either.  I get the same caveat and I did a full back, but...

  Can someone tell me what to do or how to check and see what the problem is until I have to just chuck the drive because of this warning?

  Thank you for the additional information.

  Did you run the BIOS CHIP to test your hard drive?  Also, I don't think that the added hard disk HP software had nothing to do with the message you receive.

• I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available.

  I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory?  Its not partitioned to another eather drive

  original title: hard drive problems

  (1) what does your BIOS the drive size?

  ============================================================

  2) disk hard test - find your make and model:
  Speccy - computer/system information in detail
  (More detailed look at your memory and CPU)
  OS, CPU, RAM, card, graphics, hard drive, optical drive
  Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ================================================================

  (3) HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com