Is it possible to run an Optiplex 3020 Headless?

Similar Questions

• Possible graphics card for DELL OptiPlex 3020?

  Hello

  Is it possible to install a video card in the computer Optiplex 3020? I was recommended the 750/750ti from Nvidia that requires no connection to power, but the tech in the store guy told me that even this does not much help us play games because of the power bit my diet so is there anything I can do to this computer play games?

  Would like to play Dragon Age Inquisition and similar RPG, games don't care how high settings are, only 60 fps please. My computer looks like the cotyledon on the elevator.

  SSD won't do a GPU on INTEL Graphics.

  You need something like a Low Profile 7750 not because of the profile because of the power or lack thereof.  Machines of Precision 380 can be had for very little and can use maps video full size.  GTX650TI is required for finer framerates.  ZOTAC ZT-61101-10 M works very well in my Precision 380 with Pentium D 960 upgraded to 8 GB of ram and windows 8.1 pro 64-bit.

  R7250E is a 7750 remarketed

  http://www.Newegg.com/product/product.aspx?item=N82E16814121800

  http://www.eBay.com/Sch/i.html?_nkw=Dell%20precision%20380

  

• Issue of dual monitor OptiPlex 3020 SFF

  Hi all

  We are looking at upgrading to dell optiplex 3020's, I have reflected on the machines of small form factor and see that they have a built-in VGA and display port. I wanted to know is it possible to run two monitors using the onboard VGA and a DP to VGA?

  Kind regards

  Howard

  Should work. Don't forget to pass the system Bios - video and enable the multi-screen display.

• Series/PS2 for Optiplex 3020 Micro card

  I need a 'real' serial port on a number of Optiplex 3020 Micro systems and cannot find the Dell Reference number for the card series/PS2 option.

  I have studied the possibility of using a USB-to-Serial adapter, but was deterred by the seller of software and accessory equipment which should be connected via a serial port.

  Several articles seem to indicate that there is a series/PS2 expansion card:

  Support the map article does not work: ' OptiPlex 3020 M / 9020M serial port does not work.
  www.dell.com/.../EN

  OptiPlex 3020 manual (page 30): "Installation of PS2 and series connector Board.
  www.manualowl.com/.../430454

  All I can offer is the Dell USA = part number
  WN80W - Council of Wistron IO with support, cable, screws

  You will need to contact Dell for your country and see if the part number is the same or different.

• OptiPlex 3020 TSRI support

  Hello

  Optiplex 3020 supports the technology Intel Rapid Storage Technology. Is it possible to create a volume RAID-1 with TSRI added a 2nd HARD drive?

  If so, is it mandatory to reinstall Windows 7 from scratch?

  Hello!  Not that I know 100%, but I doubt that it supports TSRI.  TSRI seems to set up the consumer according to the systems rather then trade what I've ever seen.  Regardless if it was to be available, you will need to wipe the hard drive and start over like you would go interface AHCI HDD to a RAID interface that TSRI uses. Since the SSD prices continue to fall, TSRI seems fallen passing nearby.

• Second HDD in Mini-Tower optiplex 3020

  Is this possible?

  What is needed and how to do it?

  any advice appreciated

  Hello

  Thanks for writing on the Dell Community Forum.

  The Optiplex 3020 supports two hard drives at a given point. You can either install two 3.5 "or two 2.5" or 3.5 "one & a 2.5" hard drives on the computer. Following table contains specifications of the hard drive that can be used.

  	MT	SFF
  Bay
  Supported optical drive Bay	1 HH or 1 Slimline	1 Slimline
  Supported hard drive Bay	Two	One
  Hard maximum supported players (3.5 "/ 2.5")	2 x 3.5 " 2 x 2.5 " 1 x 3.5 "+ 1 x 2.5"	1 x 3.5 " 1 x 2.5 "
  Interface
  SATA2.0	One	One
  SATA3.0	Two	One
  3.5 "hard drives
  1 TB SATA3 7200 RPM HDD	Yes	Yes
  500 GB SATA3 7200 RPM HARD DRIVE	Yes	Yes
  Hard drives 2.5 "
  500 GB hybrid Solid State Drive SATA3 w / 8GB Flash	Yes	Yes
  500 GB SATA3 secure encrypted drive	Yes	Yes
  128 GB SATA3 Solid State Drive	Yes

  In order to install the secondary hard drive, will need you the hard drive carrier. Please check the Bay of hard drive if the hard drive carrier is already there. Please refer to page 16 of the manual from the link below for instructions on the assembly/disassembly of the drive:

  http://Dell.to/1RKmzSH

• Is it possible to run files apk on my phone SE

  Is it possible to run on my SE apk files?  Thank you

  # An apk file is a package Android file, and which would not be in the iOS. You couldn't install Android on an iOS device, as it would not be in the App Store, which is the only place where ever you get things to install on the iPhone.

• Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

  Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

  N °

  (143905)

• Is it possible to run Windows 7 on Tecra S1 PT831E

  Hello

  is it possible to run Windows 7 on my Tecra S1 PT831E 126PQ?

  I've updated the BIOS (last?) version 2.50 (it should be suitable also for Windows 7). With this done BIOS is fully compliant with ACPI?

  Checking with Windows 7 Upgrade Advisor should not be a problem, in fact.

  Thanks for any help.

  Well cordially

  ThomasMuentzer

  Hello

  Of course, you can install Windows 7 on your good old classic.
  But the fact is that there is no official driver Win 7 on the page of the European driver Toshiba, it seems that you have to collect the pilots in his own hand.

  But in general this should not be a problem of submission.
  WLAN, LAN drivers can be downloaded from the pages of chip manufacturer driver touchpad can be used in other models of computers, laptops and Toshiba as VAP (value added package) Flash cards tools or similar

• HP EliteBook 8570w: is it possible to run two monitors on a 8570w without a docking station.

  Is it possible to run two monitors on a 8570w without a docking station. Connect a monitor to the VGA port and the other to display port.

  I was able to get this to work. My 8570w has an Amd over-pants 7700, don't know if that matters. One is connected VGA other Displayport. The port monitor must have a custom resolution defined in the over-pants Control Panel. except that it works perfectly. More laptop screen no. Docking Station 2 24 inch Dell.

  And thanks for the quick reply Provost.

• Is it possible to run virtual machines on Satellite A500-1DN?

  I want to know its possible to run a virtual machine on my laptop?

  (Windows VM cannot start the computer does not support hardware virtualization ed)

  Help please

  Even if the processor supports virtualization, it can be disabled in the BIOS by default and must be activated before use.
  Then please enter advanced BIOS settings and check if the virtualization technology is enabled or disabled.

• Is it possible to run splitview with two-mode applications landscape on iPad pro in portrait mode?

  Hello

  Is it possible to run splitview so that both applications are in landscape mode, while now the iPad in portrait mode?

  So basically, instead of apps side by side, it would be top apps down.

  I use goodreader to watch a video while surfing the web on safari. But when he was knocked down by side there are a lot of realestate lost on the side of the video.

  see you soon

  Unfortunately not. If I was a Pro too much it would be my favorite. Try using the comments link to suggest to Apple.

  http://www.Apple.com/feedback/

• Is it possible to run DiagOnCAN with the NI-CAN driver only (without car Diag command Set)

  Hello world

  Is it possible to run DiagOnCan without using Diag command set auto - only with the NI-CAN driver (hardware I use is low tolerant speed - USB8472 and NOR-XNET)?

  G. Petko

  no problem to do with your hardware and NI-CAN frame API.

  However, you must implement the Diag and Services Transport layer on your own, which is quite a big job.

  I recommend you spend the money for automotive diagnostic command set that supports

  • NI CAN (PXI, PCI, PCMCIA, USB)
  
  
  • NOR-XNET
  
  
  • cRIO/985 x target (Pharlap and VxWorks) #.

  which means that if you plan to transfer your application in the future to different hardware target or the real-time target, that you don't need to change your app at all.

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• Is it possible to run an executable on a Windows Phone 8 Labview?

  If I create an executable of Labview, it will be possible to run it on a Windows 8 phone?

  No, as Mike has already said.

  The reason is that an executable of LabVIEW contains a binary code that is compiled for the x 86 architecture CPU, and access to the Win32 API. Windows Phone general works on the ARM or RISC processors and provided only a subset of Win32 very limited in the past. With the new Windows RT technology that he actually moved even further the Win32 compatibility as it is all architecture is based on .net technology.

  So even if you happen to get a processor Intel Atom based device Windows Phone that would be compatible x 86 it couldn't work, because a LabVIEW executable is an executable format portable Win32 is not a picture of .net bytecode.