Is it possible to simultaneously connect two keyboards of blue-tooth?

Similar Questions

• Cannot connect LGUX300 phone via blue tooth laptop notebook g70 - 257 cl of HG.

  Cannot connect LGUX300 phone via blue tooth laptop notebook g70 - 257 cl of HG.

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not correct it contact the phone manufacturer

• Satellite L850 - is possible to connect two monitors external simultaneosly

  Hi, I have a L850-150 and I would like to know if it is possible to connect two monitors external simultaneosly, one by Hdmi and the second by Vga to enjoy an installation of three active screens (including the laptop screen). Im trying to figure out how to do without using a USB to adapter vfga or a Matrox dualhead2go.

  I want to use the outputs existing.
  Thanks in advance

  Some laptops supports a dual output: for example the Qosmio X 500 as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

  But for Satellite L850 this isn t possible.
  But you can use an external device, such as Dynadock
  http://www.Toshiba.com/us/ACC-dynadock

• Tecra M5: Is it possible to connect two monitors?

  Hello

  Is it possible to connect two monitors the Tecra M5? Is it possible through the port replicator, perhaps by a split of dvi output or a dvi, one on the vga monitor. I want to divide between the two monitors.

  At soon now
  Iain.

  Hello

  No, it's not possible to connect two external monitors.
  If you want to split the screen, you can use the extended desktop option.
  In display properties, you will find the option to extend my desktop on this monitor. You must select the second monitor and activate this option.

• Tecra Z50 - need to connect two external monitors

  I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

  Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

  * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

  Hello

  I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

  The RGB/VGA port supports analog signal.

  The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

  > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
  What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
  It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

• Can you connect two cable on wifi networks?

  Basically, I'm trying to build it.  It was much easier in photoshop than to the fact of installation.

  

  There are many features, some wired, some wireless.  I ran son where I can run threads, but it's a bit more difficult that I thought for a domain.

  Basically, I need to connect two wired over wifi networks.   The 2nd must share this wifi via ethernet. (I can exchange picture 2 and 3 if necessary)

  There are also two 4-port switches in the mix for the NAS in the basement and other devices connected.

  Everything works the latest firmware. All computers on the network are running 10.11.4 Mac

  Can you connect two cable on WiFi networks?

  In theory, Yes.  In practice, not if you work with image, video files or other media.

  Honestly, it's a big House of cards, and even if it does not, it will be very SLOW... Since everything will depend on a connection without wire between Imagine and Imagine 3... and wireless will be much less bandwidth of a wired connection, not to mention the much less reliable than a wired connection being.

  If unfortunately, the bottom line here is that a professional, or even a good amateur would never has something like this.

  There are some other questions to ask, but by far the most important would be... is it possible that Imagine and imagine 3A connect using a wired Ethernet cable connection?

• HP f1905e monitor, connect two PC?

  HP f1905e monitor has two inputs for video, a VGA the other DVI D.

  I have two HP Pavilion PC: p7 1490 (product number: H3Z94AA #ABA) and a1540n (product # EX276AA-ABA)

  The first PC has two outputs video VGA and DVI-D

  The second video output only VGA.

  Can I join the two PCs monitor HP f1905e in simultaneously, one for VGA input to the VDI of entry

  on the monitor and switch between them with the keys of the ODS on the right side of the screen?

  Hello Clawinus,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you're looking to connect two computers HP f1905e monitor switch inputs as required. I got the Guide HP vs15 LCD monitor HP ha17 LCD monitor HP vs19 LCD monitor HP f1705 LCD monitor HP f1905 LCD monitor user and on page 3-14 TI says "you can connect the cable VGA, DVI - D cable, or both. A single cable is connected for typical installations", which States that you can connect the two wires.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Connect two monitors on HP Pavilion a6030n

  My office was purchased in 2007 and has the onboard nVidia GeForce 6150SE nForce 430 graphics. Is it possible to connect two monitors to this system?  There is only a single RGB connector on the back which is connected to my flat screen HP vp17 monitor.

  Tuna, no.  Should upgrade you to a dedicated with two video ports video card (1 VGA port, 1 DVI or DVI 2).  According to the use of the computer, the video card may require an upgrade of the power supply, also.

• Connect two BT headsets at appleTV4

  Hello

  Is it possible to connect two headsets bluetooth in appleTV4 at the same time?

  Apple say several units at the same time, the exodus headset and controllers, but do not know if both headphones work.

  Best regards

  Erik

  Bluetooth audio sends only the stream to a pair of headphones. However, you can buy dispatchers bluetooth spare parts in order to get the desired results, but as computers, tablets and phones only 1 headset can be paired at one point with the ATV...

• How to connect a keyboard to a 8-1401 HP Tablet?

  I wonder how I could connect a keyboard to my HP 1401 8 tablet.

  I bought a wireless (bluetooth) (mark Anker) keyboard, but then I realized that I obviously do not have compatible Bluetooth on the tablet. Is it possible to use a bluetooth dongle adapter (if so, which?) to my Tablet compatible bluetooth, so that it works with the keyboard, I've already bought? Or is there a workaround using WIFI to connect the wireless keyboard? (If so, how?)

  If not, what do I need connect a wired keyboard? I think a USB OTG cable that fits the micro-USB port to a classical USB port? And any particular type of keyboard should I consider for my HP 1401 8 Tablet?

  Thank you!

  (The love of my printer HP Officejet Pro, but I'm not finding HP technical support for tablets very... existing.) Tried three times for 'cat', and every time I have waited more than 15 minutes AFTER the display shows that I got an estimate '1 minute' to wait for a technician. What is happening with this? Is this typical or did I hit it on a bad day?)

  Hello and welcome to the HP support community!

  There is a message at the top of this section on the ability of the OTG.  HP 8 1401 is listed as able to withstand a keyboard via OTG, but a BlueTooth dongle is questionable...

  OTG Support Post.

  HP support for OTG was very hit & miss throughout their whole Tablet line, with more accuracy than hits.  If I were in your situation, I would seriously consider acquiring a tablet which had integrated BlueTooth if you want to use a BlueTooth keyboard!

  Adding a keyboard of version OTG would work - maybe you can return the keyboard Anker.

  (I type this reply with a slate of 10 HD & a former Palm BlueTooth Folding Keyboard keyboard!)

  WyreNut

• Can I connect two monitors to a PC Tower? cc = us

  Can I connect two monitors to a PC Tower?

  Yes, you can connect two monitors to a PC Tower... but your PC should have several outputs that are concomitant supported and your monitors must have matching entries to make it work. If your system does not support multiple and simultaneous outputs there are other options to solve this problem.

  Frank

• Simultaneously display two GigE cameras

  Hello

  I'm using Labview 8.6. Since my Toshiba Tecra laptop. I would like to view simultaneously, the two GigE scA1600 - 14gm which are connected via normal Ethernet cameras. The pace is not so important at the moment at the stage of the trial. I also want to control the exposure time. If I have just one camera, I can get the image and control the exposure time, see (test-one-device-oneshot - loop.vi). However, when I tried to put the two together, see (test-two-camera-oneshot - loop.vi), it does not work. Take ages to stop.

  Then I tried grab.vi example for two cameras (test-two-camera-grab - 0.vi), the display is inconsistent, similar as things Richard Swent described.

  any suggestion is appreciated.

  Xiaofeng

  Thank you, Bruce.   After addition of cancel, it worked for me in LabView - 8.6.   I have attached the screws in case anyone is interested.   bB the way, I have also tested my original screws with Labview-9, all of them worked.  using Grab for two cameras worked as well.   I guess there must be some problems with the MAX for GigE driver to 8.6.

  Once again. Thank you.

  Xiaofeng

• Connect two monitors to my laptop HP

  I have a laptop dv7 HP Envy.

  Windows 8.1

  Inter Core i 7-3630QM [email protected] GHz

  16 GB of Ram

  64 bit

  1 TB HD

  Intel HD Graphics

  NVIDIA GeForce GT 635 m

  2 monitors:

  HP w2207h W? : 1 - HDMI. 1 VGA & 1-USBin.

  2 - Out USB

  Monitor 27 '' LCD HNC

  HDMI 1

  HDMI 2

  VGA

  I would like to connect two monitors to this laptop. The laptop has: 1-HDMI; 1 VGA.

  This seems to be a slam dunk, it's not. They put the VGA and HDMI so close together that I can't connect both at the same time. It's as if they force the VGA or HDMI. I am a general contractor and need two monitors if possible. I look at work photos on an all in utiizing a drawing program to produce plans of work on another.  There are 1/4 "between the VGA and HDMI imput plugs I would have been Golden, but they did not. Can anyone suggest a way to get these two monitors plugged and upward and running.

  Thank you

  Perrys6

  Ahhhhhh.  Hey all what works.  I had not thought that.

• How to use two keyboards for two-player games?

  the use of two keyboards for two-player games?

  Original title: two keyboards

  This is not possible, sorry.

• Connect two switch stacks without stack...

  OK, so we have a stack SG500 and another pile of SG500XG, we would like to connect the two piles together using a Direct attach cable (which we also used to create batteries).

  It is possible to attach the two piles together in this way without the two piles becomes a battery? (we have reasons that we do not want a big stack)

  I hope this makes sense?  Any ideas appreciated.

  Unfortunately no, if you use stacking cables and connect them to the switch equipment automatically reads the cable and start the process without any input from the end user.

  The only other option can think off is to create an etherchannel between the batteries have 1 battery as L2 L3 Garland battery like that