Photosmart C7180: seams of ink to be cast on the page while performing the C7180 printer heads cleaning

Similar Questions

• Photosmart B8550 - make the XL 564 cartridges ink also incorporate the same print head?

  Photosmart B8550

  XL 564 ink cartridges sit also in the same print head? Or do I need to buy a big print head to accommodate XL ink cartridges?

  I ask this is because 564 plain ink cartridges seem to fit pretty snuggly here, so I don't see how a wide range of ink cartridges could go in there!

  Or what is the standard ink cartridges are only half full and XL ink cartridges are full, so they use the same ink cartridge?

  Thank you!

  As long as you use the same number 564, etc. 940 XL just means that it gives more volume page. So, you can use the same print head...

• HP Photosmart C7180 printer, print too slow

  HP Photosmart C7180 prints too slowly

  Hi Buck,

  Thank you for the information. I want to clarify a few steps to see if we can rule out some possibilities.

  1. When you use the separate scanner, is also connected USB?

  2. If you disconnect the other scanner, turn off of the other scanner. The same thing happens?

  3. once the C7180 print slowly, what happens if you print the self-test and then make a copy of it? How long does it take?

  4. is the impression that is plugged into a wall outlet or a surge protector?

  5. If you have another USB cable, have you tried plugging in the printer with this cable? If so, do you still feel the same problem?

  6. What is the brand of the other scanner?

  Looking forward to your answers.

• Photosmart C7180 printing problem

  So, here's a strange, my Photosmart C7180 age of 9 months has developed a bad habit to print all pages in landscape mode. I used the printer almost daily for 9 months, but 2 days ago I started to notice this weird quirk when printing multiple-page documents. I can't verify what may have triggered (this software or an OS update) because it is possible that I haven't printed documents several pages for a few weeks. I checked for the OS/App/Firmware updates and checked that I have the latest drivers and software. I restarted the two systems and reset the default settings for the printer.

  I can print a single page in Portrait mode, but if I have 3 pages print the 2nd page comes out in landscape. I can print the 2nd page individually and it is fine. It happens that I print from Microsoft Word, or even if you use the Microsoft Photo Editor or HP Photosmart software.

  I use the TCP/IP connection to print from my laptop Microsoft XP (even though I just checked that this happens when you use Bluetooth as well).

  Everyone knows it or have one could explain why it seems to be possesed?

  Hello

  try turning off the advanced printer printing functionality

  > Control Panel

  > Printers and faxes

  > right-click your printer icon by default which is c7180

  > select Properties

  > click on Advanced tab in the Properties window

  > uncheck the box saying ACTIVATE a FEATURE of PRINTING ADVANCES

  > hit apply, then press ok.

  > then try to print your documents

  Kind regards

  Kiko

• Color printer HP Photosmart C7180 bad printing

  HP Photosmart C7180 printer does not print the correct colors. All color cartridges are ink. Self-test page print the shows reddish brown in black, dark blue area in zone yellow, nothing in the light areas of cyan, and cyan and clear blue stains in the light areas of magenta and magenta. All the printed words on the page are black.  The printer gives no error code word. The problem started by printing all color in green areas. The printer has a wireless connection for my HP computer, which is running MS Vista.

  Hello

  You can try the suggestions in the troubleshooting document following the link:

  http://support.HP.com/us-en/document/c00720626

  I hope this helps.

• Photosmart 210 a: won't print black after installing new print heads

  Hello, I bought and installed a new printhead. It will print color but not black.  They were all new cartridges when the print head went down.  the tools to say all the cartridges are full, please help.

  Hey there @LMACE!

  Thanks for posting on the HP Forums!

  I see that your printer is not printing black once the print head had been replaced.  I would be more then happy to provide you with some suggestions that can make things work again.  The first thing I would suggest is to remove the cartridges and printheads the printer and manually clean the electrical contacts on the printhead and the printer.  It is possible ink sprayed on the copper contacts causing a bad connection, when the new print head has been installed.  If the printhead is not getting a good connection, you may notice messages on the printer error and poor print quality.

  To clean manually the printhead in the B210a Photosmart click here: manually clean the print head

  If please, after back and let me know how it goes!

• First HP, I bought more than a decade (c410a) and it has an ink SYSTEM FAILURE error from the first day

  Photosmart Premium left me very unhappy.  I stopped to buy HP more than a decade and now I'm wishing that I would have stuck with my decision.  Myself and 3 other friends have bought these printers and both of us have had problems.

  I went through the steps, had a new printhead ink shipped, walked and steps with new tech mistakes really falling.  Last person said they were doing an interview, so that they couldn't transfer me.  Now I remember and of course no sequel to our conversation has been documented, so they want to go through it all over again.  Two hours of technical support, my mother and three calls not a printer to work.  I can't believe I bought two of these things.  It's obviously bad (probably where the print head comes in contact with the cart / I guess).  I am disappointed by the printer and support at this point.  I refuse to continue to waste hours of my time talking to representatives of phone asking me to do the same thing again and again.  I can just this thing replaced?

  The order number for the replacement print head and ink cartridges that were shipped to me is KEB489-01.  I have provided a phone number and email address.

  So I lost another hour talking with support just to send me a refurbished printer to replace my printer $300 + with less than 10 pages printed on it.  Not cool.  Had to share all the trays and the stuff of my original machine, because the replacement came not with them (I had not packed it again for good).  So of course I had to file this stuff at a Fedex in 3 days, so that they don't charge me for the price of a NEW printer.  Absolultely horrible experience.  I bought this for my mother, who never wants another HP product again (his words).  Good thing I kept his gun hung for her, otherwise she would have been dead in the water for the print jobs.  I'm not sure why this guy who kept telling me he was a supervisor (must be a big problem there) was surprised that she was angry that she had a Refurb in lieu of a NEW printer. He told her that if the printer was less than $100 that they would have just replaced.  Huh?  For the record, I'm not new at this.  I did PC support since 1989 and currently hold a COMPUTER job with a Fortune 500 company.  I did RMA with most computer component companies major, their distributors, etc.  As a regular user, I am very disappointed with HP.  Between this printer problem and the problems I had when I went from Dell to HP laptops, I think twice before you buy HP again.

  SOLUTION: Pray that your printer works (one on two of my friends did and works very well).  If not, immediately take it back to the place of purchase.  Otherwise risk of lack of hours out of your day dealing with support, shipping, etc. and reception of material used back.

• Photosmart Pro B9180 'Replace due to defective print head' WARNING

  My B9180 gave me the msg "replace the defective print head" after a period of inactivity.  I'm using Snow Leopard on a Mac Pro 10.6.8.  The printer went through several periods of non-use, since I bought it used, but almost nine.  Usually, I experience white lines in my impressions after using the printer, I've always been able to fix by cleaning of the nozzles and/or the print heads, either automatically, or manually.  The last round resulted in the warning "defective printhead" even after repeated manual cleaning.  In fact, the process to put off the printer and back, with and without unplugging it, led to 'replace' warnings for ALL the printheads several times, only 2 print heads a couple of times a moment seems to be giving me just the consistantly 'replace magenta/yellow print head.  The strip of plastic that surrounds the ink nozzles is loose to the point of current on the PH.  My printer is no longer under warranty, but before I spend money on phone support and new print heads, I want to look at other possibilities.  The book says that if the manual cleaning of the printheads does not, HP support should be contacted, suggesting that there could be other possible remedies, before you buy new print heads.   I wouldn't begin to buy new print heads to find that again, they will not work because of some other problem.  I am also concerned by the other warnings of print head, even if they did not intervene now.

  Also, opening lid for cleaning of the PH, I noticed a lot of ink accumulate in 4 coarse foam pads, each in its own little tray located inside the printer on the right side.  some of them were overflowing. / I carefully daubbed a part of the ink with q-tips, but I wonder if this condition could be or cause problems.

  Ideas?

  Finally got tired of waiting on HP.  Expected response Bob during the 'days of Forum' or whatever they called.  My problems with their goods should not have affected them too!

  FYI, I ordered a new printhead magenta/yellow, installed and still had "replace print head faulty warning."  Has released the new printhead, cleaned of some sort of clear, gelatinous * beep * of gold contacts with a q - Tip and reinstalled.  Surprisingly, printer started working.  (Took a lot of time to do her routine 'thump, bump & hum'.)  Don't know how long it will last.

  My next printer will be a Canon or an Epson!

• HP Photosmart c7180 - wrong cartridge error - wants introductory ink cartridges that I have more

  Hello

  I need help, error compensation "error message cartridge wrong - use introduction of the ink cartridges that came with the printer. I no longer have the introductory cartridges and have only refill cartridges.

  Help, please...

  Jaye ~.

  Oops, the link I gave before has been registered regarding the C7180.  You can try an partial reset as described in this document.  If the partial reset does not solve the problem try a semi full reset, which is similar, but with the # and 6 buttons.

• Get ink system failure-code-Oxc18a0201 error message when you try to print from C7180 printer

  Original title: C7180 printer all in one

  I'm unable to print I receive ink system failure-code-Oxc18a0201.

  HELP IF YOU CAN

  THANK YOU FOR YOUR TIME.

  Hello

  1. what operating system is installed on the computer?

  2. you use all-in-one printer, HP Photosmart C7180?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link mentioned below if you have HP printers and see if it helps.

  Error Oxc18a0201 INK system failure C7180

  Hope this information helps.

• All-in-one Photosmart C7180: c7180

  Hello

  I have a Photosmart C7180 all-in-One I've had for many years, with no problems.

  Now it's show the message "Wrong cartridge" - use the introductory cartridges that were shipped with your printer.

  As I have had this printer for many years, I have more Introduction cartridges so the machine can not currenty serving. I just put a full of brand new HP cartridges in the printer so would address the problem the printer rather than throw it away.

  Any help would be most welcome.

  Hello @ Hockey12,

  Welcome to the HP Forums.

  I understand that you have a problem where your c7180 wants to install cartridges. I want to help you with this problem.

  Today the program installation, or introduction cartridges are not easy to find. Call to HP for a game is probably not an option that the printer is no longer supported.

  You printer had been implemented, but seems to have forgotten this fact. This looks like a firmware issue.

  I'll try first the troubleshooting questions ink cartridge .

  If this does not work, I would recommend a partial reset, or if it does not reset semi complete.

  I will private message you the steps to perform these resets. I highly recommend you to look at Bob_Headrick

  poster Printer resets: What You Should Know, before you perform any reset.

  Please reply on this thread, how things work, I would like to know.

  Thank you.

• HP Photosmart Premium C309: blue ink will not print

  I replaced all 3 color cartridges, but also the black with the new HP cartridges but when I tried to print the Cyan (blue) does not print. I tried to print something green on this subject and it printed yellow. The computer recognizes that the new cartridge has been installed. I cleaned the print heads, but that did not help. I printed a page of diagnosis and cyan won't print, even if it does appear that the ink level is declining, although it is not printing.

  In the paper here troubleshooting steps can help solve cyan not print on your Photosmart c309.  Be sure to go through all the steps in order.

• Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans.

  New desktop computer. New OS than Windows 7, 64 bit. Office Enterprise 2007. Software loaded new Photosmart c7100 CD purchased from HP as directed.

  Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans. I want to scan to E:\

  Nothing wrong with the scanned image. No error message.

  Found. Settings, scan settings, scan to... Configuration, settings button, buttons search for the solution Center, manage shortcuts scan... and then create new shortcuts in the folder of your choice!
  How bypassed can you get?

• PhotoSmart 5512 no black ink printing

  Hi all.  I have a PhotoSmart 5512 who has recently stopped printing black ink.  Before we get into all that, here is some basic information:

  Primary computer: MacBook Pro OS 10.9.2

  Connection: On home WiFi network

  Recent changes: black ink cartridge changed (twice), no network changes

  I serve this 5512 without problems since we bought it in August 2012. Recently, it stopped printing black ink. I checked the levels and it seemed to be close to empty (by using the form on the printer and Mac methods of control levels). I replaced the black cartridge with a black cartridge HP 564XL black. Installation, I ran the "clean printer heads" several times, but still saw no black ink. All I get on the print are the various boxes of colors at the bottom of the page.

  Yet once, I replaced the black cartridge with a new black cartridge HP 564XL black.  Once again, to the installation, I ran the 'Clean Printer Heads' several times, but still not seen any black ink.

  I removed the cartridge and checked the filter between the cartridge and print head. He had a cool on black ink. This makes me think that the printer is properly pulling the cartridge ink and sending it to the head print correctly, but for some reason, this isn't making it by the head of the printer correctly.

  I followed the steps on this page (found in another similar post), although I have not yet submitted the printer for maintenance.

  Help, please. I am a teacher by class 1 and almost all print on cardstock color for my students.  Not having do not access to home printing has really took me by surprise.

  Thanks for your help.

  -Joel

  - - - - -
  Save an athlete. Adopt a Greyhound!

  @GreyhoundGuy

  I will send you a private message (departure from the envelope at the top on the right)

• HP Photosmart 5514 no black ink printing

  I have problems with my printer photosmart 5514 not printing black ink and the printing of blank pages. I've tried every suggestion of simple troubleshooting and nothing has worked. I have cleaned the printhead to the printer about 5 times, tried to align everything (but the alignment page is not detected), none of my cartridges are empty, and I reinstalled the printer to make sure it wasn't a problem with the connection. I am trying to print word documents or gives me a blank page or a very slight color page and photos are coming very slowly and completely bleached.

  Please help, I don't know what else to try and my printer is out of warranty. I barely used it too so it becomes very frustrating. I would try to take the printhead manually to clean, but I can't go out with a screwdriver.

  Thanks for getting back to me. I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.