Is it possible to use a MAC address no vmware VM?

Similar Questions

• MAC address: Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Yes.

  Yes.

  Of course - you use 'other/unknown', then...?

  (Google for "MAC spoofing").

• Is it possible to find the MAC address in Microsoft Windows computers.

  Original title: help
  its possible find in microsoft net computers IP - MAC address, and where I need to write if I run to

  Hello

  Yes, the MAC address is present in every system that connects to the Internet and runs any version of Windows.

  MAC address stands for Media Access Control (MAC address) is a unique identifier assigned to the network interfaces for communications on the physical network segment.

  To find the MAC address on Windows XP computer try the steps below.

  (a) click the start menu button in the Windows taskbar.

  (b) click 'run... '. "in this menu.

  (c) type "cmd" in the text box that appears. A command prompt window launches on the desktop.

  (d) in the command window, type ' ipconfig/all'. The details are displayed for each of the network adapters on the computer. Computers installed with the software VPN or software emulation will have one or more virtual cards.

  (e) the "IP address" field contains the IP address of the network card.

  (f) the 'physical address' field contains the MAC address of the card.

• OEM 12 c uses the MAC address?

  Hello

  I wonder if the OEM 12 c is related to the MAC address of the NETWORK card of the server somehow.

  The server is Windows 2008 Virtual Server.

  OEM OEM 12.1.0.3 and the repository database is 11.2.0.3 located on the same server.

  Thank you

  Emilija

  I agree with Courtney,

  It is linked to the IP address and MAC address.

  If IP changes, you must change all Agents and also must again fix the Agent.

• Old PITA bread - change the MAC address in VMware Workstation 6.5?

  Some versions of VMware Workstation enabled to manually set the MAC address of the virtual card.

  This possibility has been changed for several reasons.

  My personal opinion is clear.  A virtual machine needs to reflect as much as possible a hardware machine.

  VMware Workstation you can not change the MAC address, or you are related to a limited possibility, were the first hex addresses are fixed,

  so that it shows on the outside, it is a virtual machine.  VMware response is, you must run the server edition.  Well...

  Currently, I have seen, that the recent version of Virtual Box allows you to manually enter the MAC address

  for the virtual Interfaces based on Intel NIC. You can enter any MAC address, including existing material, NIC Intel MAC.

  So my opinion, the possibility of lock-out to COMPLETELY change the mac address of the virtual machine,

  must be activated again for all versions of VMware, as it is the option with other software.

  JurgenD wrote:

  Some versions of VMware Workstation enabled to manually set the MAC address of the virtual card.

  This possibility has been changed for several reasons.

  HM?  As far as I know, we have not added any restrictions.  We do not provide a user interface for it, but manually modifying the .vmx file and change ethernet0.addressType and ethernet0.address to a MAC from another provider address seem to work for me.

  http://sanbarrow.com/VMX/VMX-network-advanced.html#Mac

  I don't think the static MAC addresses are actually limited to the 00:50:56 range.

• Buy Creative Suite 6 Web Premium for PC, but now I have a Mac... possible to use on Mac? How?

  I bought 'Adobe Creative Suite 6 Web Premium' for my PC.  I have the original disks, packing, serial number, etc, and I uninstalled it from my old PC.  I would like to know if and how I can better use this product on my MacBook Pro since I no longer have a PC?  Is it possible to pay a small fee to convert to Mac or to replace the discs on Mac?  If not, what is the best way for me to continue to use my CS6 on a Mac - partition my laptop to install a version of Windows; use another software like wine; or?

  Any help will be appreciated!

  Product order | Platform, language Exchange

  Mylenium

• Possible to use the Mac Mini without a HDD internal?

  How can I boot from a USB key instead?

  Basically, my Mac Mini hard drive has been corrupted and would start to a blank screen. So I took it for repairs, and they said that the HARD disk has been corrupted. I have a Macbook Pro with a Time Machine backup on a 1 to USB Drive.

  Could not start at this Time Machine backup? If this isn't the case, I should new installation El Capitan on this USB key? All this work will be or what I need to install a HARD drive internal?

  Thank you

  chrisjay91 wrote:

  How can I boot from a USB key instead?

  Yes, but it's going to be very slow at the time at startup and the launch of the App that contain large libraries.

  Could not start at this Time Machine backup?

  No, the Time Machine backups are not bootable.

  If this isn't the case, I should new installation El Capitan on this USB key?

  You could, but he not was not done correctly it would your Time Machine backup in danger.

  All this work will be or what I need to install a HARD drive internal?

  Install a new HARD drive would be by far the best option.

  A new external hard drive would be the second best option.

  However, it is impossible to give you a strong Adviser without knowing exactly what model of Mac Mini, you...?

  Reason is as mentioned above, a USB 2.0 external hard drive would be very slow and you would do much better with an external hard drive FireWire, USB 3.0 and Thunderbolt according to which ports are a your Mac Mini.

• [ACS 5.4] Retrieve the MAC address (to be used in the policy)

  Hello

  I want to authenticate clients WLC and compare their MAC address with LDAP attributes.

  We have stored MAC address for each user on our LDAP server.

  I have to get MAC address stored by FAC in policy rules to compare with the LDAP value.

  The only attribute containing the MAC address I found is 'Calling-Station-ID' in the dictionary "RADIUS-IETF."

  I don't know if this attribute will always be the MAC address...

  Is it possible to recover a "MAC address" attribute?

  Thanks for your help,

  Patrick

  If you are using 802.1 x or mac filtering, the username of the device is used as the mac address, or calling-station-id, the time that you will see only the mac address is when you make web local auth with external authentication to the ACS. Also for users of vpn, you see this and also in terms of auth-proxy.

  For WLC and dot1x mac address is always used for the calling-station-id.

  I hope this helps.

  Tarik Admani
  * Please note the useful messages *.

• Use of two different MAC addresses EX60

  Hello outthere.

  I use an EX60 for testing. Everything works fine, but my colleagues told me that endpoint uses two different MAC addresses. These addresses are seen on the switch will remain the ex60 ist connected.

  The situation has not changed after doing a factory default.

  It's a kind of Mystic, because my ex90 do not use two MAC addresses.

  So the question is, what is the diffrence between ex60 and ex90? Is this a normal behavior on ex60?

  I hope someone can help me!

  Greetings from the Austria

  Martin

  Hello

  Using a touchscreen on the EX60? I think that the 2nd MAC address will probably be that of the touchscreen attached. How to check? The MAC address of the EX60 can be verified using the API. SSH into the EX60 and run:

  XStatus network //Mac

  * s network 1 Ethernet MacAddress: "00:50:60:05:52:BA."

  * end

  Ok

  The MAC address of the button can be controlled via access root for the codec.

  SystemTools rootsettings on

  [dderidde-ex90-desktop: ~] $ arp - a

  ARM3. LocalNet (169.254.0.13) to 00:e0:0 c: 00:8 c: 43 [ether] on eth1

  arm0. LocalNet (169.254.0.10) to 00:e0:0 c: 00:8 c: 40 [ether] on eth1

  ARM2. LocalNet (169.254.0.12) to 00:e0:0 c: 00:8 c: 42 [ether] on eth1

  HSRP-10-48-2 - 1.cisco.com (10.48.2.1) at 00:00: 0C: 07:ac: 00 [ether] on eth0

  ARM1. LocalNet (169.254.0.11) to 00:e0:0 c: 00:8 c: 41 [ether] on eth1

  Arm4.LocalNet (169.254.0.14) to 00:e0:0 c: 00:8 c: 44 [ether] on eth1

  [dderidde-ex90-desktop: ~] $

  My contact is not directly connected, so can't see here, only the gateway address MAC address. But you should see the touch directly connected.

  Otherwise, there is a sticker on the back of touch with serial number, and I think, MAC also.

  We have a DDT open for this behavior.

  CSCtz86298 - 802. 1 x is not handled properly on device with PC port and / or Touch

  Greetings from Belgium.

  Danny.

• Determine the MAC address of the LAN knowing that the model and serial number

  Laptop Toshiba SN 96592614 G

  Is it possible to determine the MAC address of the network card, knowing that the model and the serial number of your laptop?

  How to enter the Toshiba addicts.

  I saw you using Toshiba unit details page with the serial posted Qosmio F30-113 offered in Russia.

  Your laptop is stolen or what?

• HP Probook s 4540: laptop can be Track with it, s MAC address

  A few days ago, I lost my phone at my University
  Must it be followed by using the MAC address?
  Because I have it, area in which she s MAC address, product no., serial number, etc. are written.
  Thanks in advance

  Hello

  I'm sorry to know that. Yes and no depending on many factors. The side Yes is very low and the side no. is huge:

  New 'user' does not change (or give a fake) or hide it when connect you to the internet.

  New "user" must be on the internet

  Tools ot tool to draw it down, to the right

  ...

  Kind regards.

• Advantage of the MAC address cloning?

  What is the advantage of the MAC address cloning?

  There is no "advantage" to clone the MAC address. The only benefit would be to have internet or not.

  In many cases, it is absolutely useless to use the clone MAC address. If you have an internet connection through your router, then there is no need to use the MAC address cloning feature.

  Only when you find that you have a working internet connection on a computer directly on your modem, but not when you connect through the router (or another computer directly into the modem) then it is necessary to use the MAC address cloning feature.

  Usually, this is only the case with cable TV ISP. They allow you to have an active internet connection single at any time. They do this by remembering the MAC address which connects via a specific modem. If you connect first a computer for testing directly to your modem, you will have an internet connection. Now if you connect a different device to your modem it does not work is because the ISP has always blocked the internet connection, the MAC address of the first computer.

  How to remove the lock depends on the ISP and the modem. Sometimes just reset the modem or to turn everything off. Sometimes you turn off everything for a few hours and after that the first connection device is the one with the internet connection (i.e. make sure you connect the router then...) If you want to know exactly how your ISP to do this, you need to ask...

  The simple solution is to use the MAC address cloning feature. The router "clones" the MAC address of the first computer, i.e. it basically pretends to this computer. The MAC address is accepted by the ISP and is immediately authorized to the network. You have a working internet connection on the first computer, either through the router directly because both use the same MAC address. (This is no problem on the router because the MAC address is used on the internet port only...).

  Of course, remember all this. If at some point later, you connect another computer directly to the modem (for example you have connection problems and want to know what is wrong) you can "lock" in a different MAC address for your connection and you will have to wait to find the connection to a different device.

  But once again: there is absolutely no need to use the clone if you have an internet connection through your router.

• Problems with the MAC address duplicate when creating new jobs virtual

  We use the MAC addresses of vWorkspace management. This means that we have the option set as an attachment with the basic MAC address pic01. This has worked well so far. We now extend our VDI environment with the new Virtual Machines in a new group. But now, we got the question if we create a new desktop computers, the broker for connections will distribute double MAC addresses (see the pic02 attachment). And as you know it will end in a messy DHCP and TCP/IP. Even if we put the basic MAC address to a new range, the broker for connections always distributes the old MAC address range. We restart the broker for connections rather than on the time and the problem is still the same!

  Does anyone have ideas or solutions to this problem?

  If you need additional information just let me know.

  Versions:

  vWorkspace Broker for 7.6.305.845 connections

  Client tools PN 7.6.0.820 (former VM) or 7.6.0.845 (new VM)

  THX and greetings

  Thomas

  Additional accessories:

  • 
    pic01.jpg

  Hello

  Address management Mac is for groups of clouds. With groups of clouds, the machines get deleted/re-created very often so we need mac address management to allow the mac address be reused after a certain period of time.

  With traditional groups, the machines are kept for long periods of time if you don't use mac addresses that you will get the number you have described management.

  Thank you, Andrew.

• 802. 1 x per MAC address with power connect 2848

  Hello!

  I use 'Authentication Port' on my PowerConnect 2848 switch, the RADIUS server is Windows Server 2008 R2.

  Workstations authenticated correctly and everything works well.

  For my devices VoIP which does not support the RADIUS, I would add the MAC filtering.

  Under Authentication Port-> Port of choose-> Authentication Type, there are 3 options, "802. 1 x only', 'MAC Only' and ' 802.1 x & MAC»

  1. What is the difference between MAC only and MAC & 802. 1 x?

  2. as far as I know, when you use the MAC option in 802. 1 x switch RADIUS one server sending requires authentication with the MAC address in the user name and generate a password in order to create user names on the RADIUS server with this information and filter like this just addresses MAC I agree.

  The question is, what is the password to the 2848 sent to the RADIUS server in this situation, use a password that is preconfigured for all authentications of MAC? or it uses the MAC address as password in addition to the user name field?

  And additional information on what I'm trying to accomplish would be great,

  Thank you very much!

  From my understanding when it is set to 802.1 x & Mac port must first check the device to be compliant, 802. 1 x if it is not then it will try to authenticate using the MAC of a device as the user name and the password. If the MAC address has been placed in the RADIUS database, then it will be able to authenticate.

• obtain the Mac address

  Hello

  Is it possible to get the MAC address?

  THX

  There are many specific functions of the device in the API: http://developer.blackberry.com/native/reference/bb10/com.qnx.doc.bps.lib_ref/com.qnx.doc.bps.lib_re...

  These are maybe interesting for you:

  deviceinfo_details_get_hardware_id()

  deviceinfo_identifying_details_get_serial_number()

  Note that the user must allow your application to collect these data. You add permissions to the bar - descriptor.xml