Satellite 1800: switches black screen

Similar Questions

• On the Satellite 1800-921 black screen problem

  Hello
  My satellite 1800-921 has started to give me a black screen after I turn it on. It loads well, go to the desktop and then the screen turns white and I can't make it respond. We can just distinguish the dialogs on the screen so I don't know if it is a screen problem or things I see on the screen are just ghosts...
  It's a bit worrying!
  Does anyone else have this problem? So far, it seems to happen when I turn it on. Usually, I have to turn it off and reboot to get it back and then it works very well.
  Thank you
  Nancy :)

  Hello

  to the old series, it may be that the FL inverter is broken or damaged the tupe of backlight. In both cases, you can see the screen but without backlight!

  To differi if it is a hard - or software error, you should start the laptop and ESC immediately to enter the BIOS. Then the machine must be running half an hour in the BIOS. When the rupture occurred it is quite sure that some hardware is broken. Otherwise, it is a software based and a restore with recovery CD Toshiba should solve the problem!

  Goodbye, TOK

• When I press on switch black screen user is coming...

  When I press on switch black screen user happens... I can not able to restart my system... After doing system restore i only be able to boot my system...

  Hello

  This could be a hardware problem, if the items listed below do not help, try to contact your computer manufacturer for help with hardware issues.

  Method 1: I suggest you to update the BIOS and drivers of motherboard chipset on the manufacturer's Web site.

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: also try updating the graphics card driver.

  Method 2: Refer to the article below and check if it helps.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Method 3: I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists.

  http://support.Microsoft.com/kb/929833

• Satellite C660 powers, black screen and switches off the power

  Hello world.

  I have a C660 - 22v.Everything worked very well. An hour later, then to use the laptop again, it works, and he turned on as normal in 2 clicks, then more nothing. Just a black screen, not yet turned on, then after 5 to 15 seconds, the fan accelerates for a second or 2, then the laptop turns off.

  Tried with the batteryout & just the charger pluged, just the battery, hold the power button, all sorts of ways, but it only of the switches off the power.

  I think that the hard drive has failed. Any help would be welcome as its out of warranty (16 months).

  A big thank you in advance, Neil.

  In my opinion it has nothing to do with the hard drive. I assume that there is a problem of electronic power supply. I have a similar problem with my A300 and at the moment I put t know what to do.
  Repair is probably quite expensive so I m thinking about selling on eBay as being faulty.

  Problem is that we cannot do much. What should do? You can dismount, take a look inside and put the new.

  Either it works or not. I'm afraid that your problem is for the service and it must be checked by the guys from the services of m.

• Satellite L500-1WG - black screen, turn on

  Hi all

  I am looking for some advice,
  I'm far from being a computer whizz but know my turn well enough. I put my model below.

  No apparent reason, I have the black screen.
  The laptop was working fine yesterday. Windows has shut down the computer automatically to install an update. Since the laptop this morning train, nothing.
  The power lights, flashing web cam, windows sound times.
  No courier. But nothing
  I can even enter my password and it is registered on. I tired to fix battery, but it did not work. Thanks in advance to all who wish to help!

  my model is
  Satellite L500-1WG
  Part number: PSLS0E-07501DEN

  Main features
  Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) and
  Genuine Windows 7 Home Premium 32-bit (pre-installed, Toshiba-HDD recovery)
  -Intel Pentium processor T4400
  -DVD - RW SuperMulti drive (Double Layer)
  -RAM (1066 MHZ) DDR3 4096 MB 2048 + 2048
  -39.6 cm 15.6 "TruBrite HD 1366 x 768 display high brightness with backlight LED with aspect ratio 16:9

  By pressing keys FN + F5 allows to switch between the internal and external screen.
  I recommend you connect the external monitor (or a LCD TV) and press the keys mentioned in order to verify if the external display will work properly.

  But I'm a bit confused... you said you were abele to enter the password...
  You see the field for the password?

• Satellite A200-1CR - black screen and no boot

  Model:
  Toshiba Satellite A200-1CR

  Question:
  By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
  No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

  I have already (without success) tried:
  -Unlock the tray, insert the rescue CD and power on
  -Remove the main battery and power on with AC adapter only
  -Insert a bootable USB stick/external HARD drive

  The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

  What could be wrong?
  Thank you.

  > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

  Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
  You can try to check the RAM modules.
  Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

• Satellite Pro A200 - black screen with a blinking cursor

  Hello

  I'm new to the forum and have a big problem.
  So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor.
  Also just as the screen goes black a beep can be heard which shows windows boot.

  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  Please go into the BIOS settings and check if the HARD drive is listed there.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  Eventually the HARD drive is dead and you need to replace it and reinstall the operating system.

  Good luck

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro U200-> black screen after startup

  Hello

  It happens from time to time when I try to start my PLUA1E Satellite Pro U200-02802QS4, then I get a black screen even from the BIOS.
  What is wrong and how to fix this?

  BTW, I already have this BIOS version: P0044v370.exe installed.

  Hello

  This happens from time to time?
  This means that you can not reproduce this problem?

  Hmm that's not easy to say what the issue might be.
  Maybe the BIOS update will help you at the moment you can find BIOS 3, 7 victory on the European driver Toshiba page.
  If you have a lower BIOS version installed, then I recommend an update.

  It is also possible that this problem is related to some of the material; motherboard, screen, etc.
  In this case the part should be replaced but first of all it of necessary to know what part is affected and I think that the technician of the ASP for this

  What do you think???

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Satellite C55-B5101 - black screen after Windows update

  Mobile received Christmas day (all new) Satellite C55-B5101, saves Windows update (formerly 8.1) by getting only now black screen... Not very in computers so if you know what please he dumb down for me! Thank you

  Hello.
  I'll post a similar problem with mine. Here is something I've read elsewhere that can solve yours.

  Unplug the cable from the main charger.
  Remove the battery if possible.
  Press and hold the power button for 1 minute.
  Leave battery and connect the cable.
  Turn on.

• Satellite C660D 15F - black screen after startup

  Satellite C660D 15F

  Hi guys,.

  I have a big problem with my laptop. When I started to-go from sleep - two days ago I heard the computer starts normally but the screen remains black. No mater how many times I tried to restart, the screen shows nothing, no message no picture. The normal operation of the side light remains on but the keyboard lights stay offshore. I can hear the computer normally (the fan etc..).

  I tried to hit SHIFT F8 start buttom on the first night, and the image was on the first attempt when I started the machine and everything seemed normal again! The next few days, I got a black screen once more and the case never worked again, no matter how many times I tried.

  Can someone help me please get out of this mess? Has anyone had a similar problem? How do solve you?

  My machine is now exactly four years.

  Thank you very much for your ideas! I really need to access some files on there!

  Hello

  Disconnect the power and remove the battery. After doing this press the power for 30 seconds about and try to reset your machine. Leave it for a while and try to start with power current only.

• Satellite A105-S4114 - black screen, maybe the heating problem?

  Hey all

  I'm new to the Board and I really hope that someone can help me with my computer problems.
  I have a Toshiba Satellite A105-S4114. In the last week or so, it started to get a black screen. If I m in the middle of watching a video, the sound would just go to a repetitive tone (very annoying sound) and the screen freezes completely.

  He sometimes goes to a black screen. The screen is not black as if the CPU is off but it's dark and nothing is displayed. This occurs when the computer has been for a little. I have had it over 2 hours now, and if this problem persists, it will happen more frequently. I've updated all the software and windows xp. Some people tell me that my motherboard is dying and I can't do anything, but some people say maybe it's an overheating problem.

  The vent on the left hand does not always give off light, but the laptop gets hot enough. Is it possible that my fan is dying? In the case of this "black screen", the computer is not power down and for this reason, I ve people had told me that he is not an overheating problem.

  Any ideas?

  Help, please. I sprayed the CPU down to the dust, and it has gotten a little better. I hold hope that I don't need to buy a replacement right away. I've had this for about 3 years.

  Thank you, Danny.

  [email protected]

  Hey mate,

  I think that for the moment no one can really say what the reason, but I also think it might be an overheating problem and you should start cleaning your laptop first. The point is that if the laptop is overheated (e. g. graphics card), you might get a black screen, freezes or your laptop stops immediately. So if please try to clean and follow these instructions: http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm

  Of course it could also be a motherboard problem but the laptop cleaning is cheaper and quicker ;)

  If it doesn t work you can access a service provider authorized professional assistance.

• Satellite C660D (PSC1YE) black screen after BIOS update

  I tried to update my Bios on my Satellite C660D portable (psc1YE) last week (big mistake).

  Something went wrong during the update and now when I power on I just get a black screen (LEDS and fan).

  After reviewing, the conclusion is that I damaged the BIOS that must now be blind flashed.
  So I got the hand on a 512MB memory stick, formatted using FAT through windows XP and used Wincris to create a startup disk after you have added the file bios.rom (renamed Bios.wph) which I extracted the last update of the BIOS on the Toshiba site.

  My memory stick has three visible files on it, Phlash16.exe, bios.wph and minidos.
  I plug laptop with battery, DVD player and power disconnected to stick, and hold Fn + B re-connection cable cable, turn it on.

  The fan whirs at full speed, and the USB lights up and flashes then for a minute, as if being read. No matter how long I let on, the fan will continue whirring and the USB is on and when I unplug and put in still works a black screen.

  I tried different sticks, (up to 4 GB with FAT32 format), programs of different startup (for example, the HP utility) drive but still no luck.

  Can someone tell me what I do wrong? I tried to look for a newer version of Phlash16 just in case that was the problem, but can not find one any where (mine is version 2008)

  All advice would be greatly appreciated even if it's just to tell me that I'm wasting my time because the pc is not repairable.

  I can't tell you if you waste your time or not because I n know if the motherboard ROM module is OK or not

  In most cases, it should be possible to reflash the ROM module using the BIOS crisis disk but this disc is available to authorized Toshiba service technicians and as much as I know reflash this methods is not always the same

  However, in some cases it might be possible that the mobo could not be fixed by disk crisis, it would be the worst case

  I recommend you to contact a certified maintainer Toshiba to check guys would be able to use the crisis disk and could test whether its possible to reflash the module ROM
  Is it not would be not possible well in this case you would need new motherboard :(
  But lets hope do ' t you need...

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)