OEM 12 c uses the MAC address?

Similar Questions

• Advantage of the MAC address cloning?

  What is the advantage of the MAC address cloning?

  There is no "advantage" to clone the MAC address. The only benefit would be to have internet or not.

  In many cases, it is absolutely useless to use the clone MAC address. If you have an internet connection through your router, then there is no need to use the MAC address cloning feature.

  Only when you find that you have a working internet connection on a computer directly on your modem, but not when you connect through the router (or another computer directly into the modem) then it is necessary to use the MAC address cloning feature.

  Usually, this is only the case with cable TV ISP. They allow you to have an active internet connection single at any time. They do this by remembering the MAC address which connects via a specific modem. If you connect first a computer for testing directly to your modem, you will have an internet connection. Now if you connect a different device to your modem it does not work is because the ISP has always blocked the internet connection, the MAC address of the first computer.

  How to remove the lock depends on the ISP and the modem. Sometimes just reset the modem or to turn everything off. Sometimes you turn off everything for a few hours and after that the first connection device is the one with the internet connection (i.e. make sure you connect the router then...) If you want to know exactly how your ISP to do this, you need to ask...

  The simple solution is to use the MAC address cloning feature. The router "clones" the MAC address of the first computer, i.e. it basically pretends to this computer. The MAC address is accepted by the ISP and is immediately authorized to the network. You have a working internet connection on the first computer, either through the router directly because both use the same MAC address. (This is no problem on the router because the MAC address is used on the internet port only...).

  Of course, remember all this. If at some point later, you connect another computer directly to the modem (for example you have connection problems and want to know what is wrong) you can "lock" in a different MAC address for your connection and you will have to wait to find the connection to a different device.

  But once again: there is absolutely no need to use the clone if you have an internet connection through your router.

• Problems with the MAC address duplicate when creating new jobs virtual

  We use the MAC addresses of vWorkspace management. This means that we have the option set as an attachment with the basic MAC address pic01. This has worked well so far. We now extend our VDI environment with the new Virtual Machines in a new group. But now, we got the question if we create a new desktop computers, the broker for connections will distribute double MAC addresses (see the pic02 attachment). And as you know it will end in a messy DHCP and TCP/IP. Even if we put the basic MAC address to a new range, the broker for connections always distributes the old MAC address range. We restart the broker for connections rather than on the time and the problem is still the same!

  Does anyone have ideas or solutions to this problem?

  If you need additional information just let me know.

  Versions:

  vWorkspace Broker for 7.6.305.845 connections

  Client tools PN 7.6.0.820 (former VM) or 7.6.0.845 (new VM)

  THX and greetings

  Thomas

  Additional accessories:

  • 
    pic01.jpg

  Hello

  Address management Mac is for groups of clouds. With groups of clouds, the machines get deleted/re-created very often so we need mac address management to allow the mac address be reused after a certain period of time.

  With traditional groups, the machines are kept for long periods of time if you don't use mac addresses that you will get the number you have described management.

  Thank you, Andrew.

• WLAN is missing the MAC address and can not use WiFi

  After an important virus corrupt my system, I got everything running except internet Wifi access.

  The configfree detects the unit, Wireless 2200BG, which is enabled and the latest driver downloaded from Intel, but he said nothing to the MAC address.

  IPCONFIG displays the wifi MAC address and loading upward it says wireless networks detected but it can not always connect.

  Configfree using I get error message c-15, c-16, c-16.

  I can hard wire to the internet using the LAN.

  IM using XP Home

  Ive took the wireless card, reinstalled, deleted, and updated.

  Any help would be appreciated

  Hello

  Have you checked the TCP/IP protocol settings?
  Do this!

  The settings are located in:
  Network connections-> network connection WLan-> properties-> Protocol TCP/IP-> properties

  There you have to make sure that settings such as; obtain an IP address automatically, get the DNS should automatically be marked!

  PS: The router must has disabled the mac address filtering!

• [ACS 5.4] Retrieve the MAC address (to be used in the policy)

  Hello

  I want to authenticate clients WLC and compare their MAC address with LDAP attributes.

  We have stored MAC address for each user on our LDAP server.

  I have to get MAC address stored by FAC in policy rules to compare with the LDAP value.

  The only attribute containing the MAC address I found is 'Calling-Station-ID' in the dictionary "RADIUS-IETF."

  I don't know if this attribute will always be the MAC address...

  Is it possible to recover a "MAC address" attribute?

  Thanks for your help,

  Patrick

  If you are using 802.1 x or mac filtering, the username of the device is used as the mac address, or calling-station-id, the time that you will see only the mac address is when you make web local auth with external authentication to the ACS. Also for users of vpn, you see this and also in terms of auth-proxy.

  For WLC and dot1x mac address is always used for the calling-station-id.

  I hope this helps.

  Tarik Admani
  * Please note the useful messages *.

• ESX uses network adapter with the mac address that is different than virtual connect reports

  Hi all

  Our ESX environment consists of HP C7000 enclosure, virtual connect 1 gb ethernet with a mixture of BL480c and BL460c. We just bought some new BL460c G7 with NIC NC553i to replace some of the oldest BL480c. We have configured Virtual Connect to assign mac addresses. In vc management consoleI see the addresses assigned to the server, but when I start the server displays a different mac address for nic #2 that vc does. NIC #1 has the same mac address of console management vc and in the server BIOS. When I install ESX also sees the 'wrong' for #2 nic mac address. According to vmware nic #2 has not any network connected to what should be if it was really nic #2 (according to the vc management console).

  When I look at the mac addresses in the BIOS none of the network interface card have the mac address assigned by vc. VC firmware is 3.01. I have attached the photos I see information in the management of VC and BIOS console. Someone at - it for clues to what is happening and how can I solve it? Thanks in advance.

  Kind regards

  GB

  Please refer to:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1001167

  Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

  To determine the MAC address of the interface Board of the ESX host, run the command:

  # ifconfig | grep-i hw

  The output looks like:

  vswif0 Link encap HWaddr 00:50:56:41:5 A: 59

  The MAC address is in the first line after HWaddr.  In this example, the MAC address is 00:50:56:41:5 has: 59.

  Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

  You can also review the output information and the esxcfg-NICS - l order MAC addresses.

• where can I find the mac address for Airport Extreme

  just bought a new Airport Extreme 802.11ac and I don't know here to find the MAC ADDRESS. Can someone tell me where to look. I have the model and serial number, but can not find the MAC ADDRESS.

  Is the AirPort Extreme, set up and operation right now... even if he could not have an Internet connection?

  If Yes... Open the AirPort on your Mac utility... (Finder > Applications > utilities > AirPort Utility)

  Hold down the option key on your Mac when you double-click on the image of the AirPort Extreme

  The next page will display a summary of the parameters

  The AirPort Extreme has done 3 different MAC addresses... Ethernet, WiFi 2.4 GHz and 5 GHz WiFi.   If your AirPort Extreme is connected to a modem by an Ethernet cable, then the Ethernet ID is the MAC address.

  If the AirPort Extreme has not set up yet at all...

  Open AirPort Utility as above, and then click the file menu in the upper left corner of the screen next to the Apple icon

  Click on configure the other

  For address, enter 10.0.1.1

  A password is normally not necessary, but if you are prompted for a password, use the word

  public

  Click OK, the settings summary page is displayed.  In most cases, given that the AirPort Extreme connects to a modem via an Ethernet connection, you want to use the Ethernet ID as the MAC address.

  If you are still experiencing difficulties, you have 90 days of support Apple phone. Call them and maybe they can explain why that should be a very simple task is so difficult.

  Contact - Support official Apple

• The printer receives do not all data. It is caused by the MAC address filtering.

  How can I solve this problem.

  The printer attempted to join the network but does not receive any data.  This may be caused by the MAC address filtering. If MAC address filtering is enabled and you want to keep enabled, add the MAC address of your printer in the list of devices allowed for your wireless access point or router before continuing.

  HP Officejet 4500 - G510n wireless all-in-one printer

  Not at all use MAC filtering.  Make sure it is off in your router.

• Determine the MAC address of the LAN knowing that the model and serial number

  Laptop Toshiba SN 96592614 G

  Is it possible to determine the MAC address of the network card, knowing that the model and the serial number of your laptop?

  How to enter the Toshiba addicts.

  I saw you using Toshiba unit details page with the serial posted Qosmio F30-113 offered in Russia.

  Your laptop is stolen or what?

• Can I get the MAC address for my lost iPad?

  I think I left my iPad Pro in the street today while loading and led away.  When I realized it, I rolled back, but he had disappeared.

  It's a Wifi model only, so find my iPhone will not be much help.  However, my local ISP is a service where you can register the MAC address of the device and it uses one of the many public access tasks automatically, then in this case I find my iPhone could help.

  Is there a way to determine MAC address the iPad when I don't?  Perhaps through iTunes?  I checked the box, but only the serial number is in the list.

  Help!

  Lol sorry

• Find the MAC address of the host remotely logged on to a domain

  Hello

  I work in an environment where we use the thin client (Sun ray DTU) to connect to sessions. The sessions are communicated through solaris servers, and windows servers. Explain further, the thin client connects user to the layers of solaris that connects to windows to allow the user a session window. Window servers are in a private domain. I work as a security consultant in the business and use a management software log for surveillance of newspapers. I collect the windows logs via the software (Application, security, installation, System) agent. My question is, HOW do I GET the MAC ADDRESS OF THE THIN CLIENTS? I have the IP address, username etc but not the mac address of the workstation. However - the TASK MANAGER and REMOTE DESKTOP SERVICES MANAGER give the MAC address in the CLIENT NAME. I raised the level of the event log to ' 5 "(through registry), enabled all policies audit with categories and subcategories as well but always without success." " I am using Windows Server 2008 R2 Enterprise edition.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• MAC address: Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Yes.

  Yes.

  Of course - you use 'other/unknown', then...?

  (Google for "MAC spoofing").

• Analyze the Mac address with the regular expression matching

  Hello world

  I have a problem with the function of regular expression matching,

  I try to analyse the response both a query arp - a 192.168.0.15 to retrieve the MAC address of the remote IP address, I used the following regular expression: ^ ([0-9a-fA-F]{2}[:-]){5}([0-9a-fA-F]{2})$

  I wonder why should I do a subset of the first string to extract only the part of the MAC address. The regular Expression function is not able to recognize the regular expression directly in the middle of a string?

  I only works when I extracted the subset of tring right as in the picture below.

  Thanks for your replies.

  Get rid of the "^" at the beginning of your regular expression. You are ordering him to find the model at the beginning of the string.

• Microsoft keeps a record of the MAC address of the Pc when an error in XP?

  I'm interested knowing the error reports, but the time in question is in about 2006-7. I continued sending the report of errors several times because I knew that it should not work.

  I used to love to play Colin Mcrae Rally 1 or 2 when even one who does not work on XP.  I used use tp my video camera to look at the monitor of the Pc and then play the game while watching TV.

  The only information I have now is the MAC address, XP key and the program that caused the error. My hard drive was legally destroyed and no longer works...
   
  Is it possible to complete the 3 steps (ticks) without internet error report?
  At this point in time, I had no internet or phone...
  Just curious if its possible.

  Hello

  I suggest you to contact Microsoft to get the information you're looking for.

  How and when to contact Microsoft and support Customer Service
   

  Hope this information is useful.

• Why must know the MAC address cable modem if I bought a new modem cable or ISP company.

  Original title: why the ISP or cable modem company need to know my cable modem MAC address if I bought a new one, beside that received from a modem cable or ISP company?

  Why the ISP or cable modem company need to know my modem cable MAC address if I bought a new one, beside that received from a modem cable or ISP company?

  The cable provides tend to lock their network by MAC address or they assign you an IP address based on your cable modem MAC address.

  Some (for example cable Telewest in the United Kingdom), used to go as far as locking down for the mac address of the PC connected to the cable modem, which is why some routers have the ability to clone the mac address of a connected device.