Is mandantory CUCM CWMS

Similar Questions

• Integration of URGENT: CWMS Question

  Hi all

  I have a question about integration with CUCM CWMS.

  Customer wishes to have 2 CWMS integrations separated with the same cluster of CUCM. It will use 2 Admin and 2 URLS of the user.

  This is, is this possible integration with the same Cluster of CUCM?

  Reason is, he got 3 UCS 220M 3 boxes and wants to use 2 of them in HA mode and 1 as standalone integration with the same cluster of CUCM.

  Please note the UCS that the client has obtained is compatible for the deployment of 250 users only and that he bought 2, 250 licenses so total 500 licenses.

  Idea is to have 2 UCS in HA mode and the third one independent but integrated whole with the same cluster of CUCM.

  It's quite urgent.

  Please provide your expert advice.

  Concerning

  Rajiv

  Hi Rajiv,

  These two separate systems of CWMS will have two access to different numbers? These two separate systems will have the same user base (will integrate you with LDAP on CUCM using AXL)?

  In theory, there is no limitation on the number of solutions CWMS you can have with a single CUCM cluster. You have different models of road, SIP trunks, etc. for each of the systems.

  I hope this helps.

  -Dejan

• CWMS users management

  Hi all

  Our customers want to integrate CUCM with CWMS only for the synchronization of users with CUCM but LDAP authentication is disabled. Y at - there any method to inform new users automatically when their account CWMS are created?  The feature 'Automatically send notification' is not found if LDAP authentication is disabled. Another question is whether new users are imported to CWMS via LDAP and LDAP authentication is disable, how should new users created their local password CWMS? Thank you!!

  Danny

  Hey Danny,

  Unfortunately, we do not have a built-in feature in CWMS to send e-mail notifications to users newly imported from CUCM unless the LDAP authentication is enabled.

  I tabled an improvement for this: CSCvb16166 any user of CUCM does not welcome if e-mail authentication LDAP disabled

  The only solution is to warn end users to go to the URL of the WebEx Site, use you forgot your password link to have CWMS send them an email with password reset link.

  -Dejan

• Forums CWMS drop after you have entered the code meeting

  Hi all

  We have webex 2.6.1.45.B - AE, call out of work, but a drop after you have entered the code-meeting... Work of DTMF.

  may be, because: you are using a trial version of the Cisco WebEx meeting server which expires in 32 days. Buy licenses to host for your system to avoid the limitation of access host?

  or someone has an idea?

  Thank you very much!

  Hello

  This problem is caused by a bad configuration of the integration of CUCM with CWMS.

  Make sure you check you SIP Trunks and SIP configuration on CUCM routing model.

  Make sure that your points in routing SIP Trunk SIP of Point Application model.

  Make sure that the Partition configured in routing SIP model belongs to a CSS that is configured in the LoadBalancing SIP trunk under:

  1. change of itinerary calling search space

  2 outside dialogue see calling search space

  Also, refer to this post to understand why the model of routing SIP and Application Point SIP trunks are used: https://supportforums.cisco.com/discussion/12879351/cucm-and-cwms-call-routing

  In addition, this guide to the official reference documentation: http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_6/Planning_Guide/Planning_Guide/Planning_Guide_chapter_0101.html

  I hope this will help.

  -Dejan

• [Q] NEO V: ROOTING AND INSTALLATION OF CWM WITH BOOTLOADER LOCKED TO 4.0.4

  Please let me know how the ROOT AND CWM FACILITY WITH IN LOCKED BOOTLOADER 4.0.4

  You need flash version 4.0.3 kernel, then root.

  So follow step e given under How to root 4.0.4

• Cannot start in CWM recovery

  Hello. I just finished my Xperia NEO of rooting (ICS 4.0.4 build number 4.1.b.0.587). I also unlocked the bootloader and installed the CWM recovery but unfortunately it doesn't seem to work. I tried the amor├ºage using ROM manager, but nothing. Then I installed CMW using X-pieces app-still nothing. Tried to start then spamming Volume down and upward, and then tried the same thing with the back, menu, home buttons.  Clearly, it does not work.  Any suggestions?

  Thank you

  I wanted to say through the parts of x.

  Repeat 2 or 3 times with the x-pieces

  If nothing happens then uninstall the x-pieces and follow this path

  http://Forum.xda-developers.com/showthread.php?t=1364509

• Activate a call encrypted on SX80 recorded on CUCM

  Hello community,

  We have heaps of endpoints SX80 on CUCM. We are trying to activate the encrypted call but cannot work.

  On the endpoints SX80 Configuration > conference set us the encryption mode on IT. If we try to point-to-point call, the call is not to connect. The two end points are set to Encryption mode WE. When the best value Effort it works but it says ' do not call encrypted.

  Are there settings that we need to check on the side CUCM?

  Thank you.

  Are you using a non-secure telephone profile or secure?

  To enable encryption, you must use a secure phone profile.  See the "Encrypted vs encrypted communication" section the Telepresence Endpoints Deployment Guide for CUCM 11.0.1 (CE8.0) on pg 4.

• CWMS 1.1 Site URL does not

  Hi all

  I have just deployly a new CWMS 1.1 for the customer, everything works well.

  However, after the CWMS 1.1 virtual machine power off and turn on again, all are very good except webex site URL is not available.

  I'm quite sure that the problem resides on CWMS 1.1 rather than the browser, as I use the same computer in both cases.

  Machin's virtual host / IP: webexadmin.webex.com 18.2.0.5

  Site URL / IP: webexweb.webex.com 18.2.0.7

  Admin URL / IP: webexsuper.webex.com 18.2.0.7

  I confirmed that DNS is working properly.   Admin URL works fine and I can use Admin credentials for access without problem.

  However, I'm not able to access the URL of the site, the page which lead me to the host of input user ID and password do not appears.

  By the way, I am also curious to know how CWMS 1.1 different requests for URL of the Site and the URL of the Admin because they were resolved to the same DNS server IP address?

  Help, please...

  Thank you

  Tian yan

  Hello Tian,

  Appolgise to a slow line here it was a long weekend in the United States.

  I would strongly sugguest you use this version 1.1.1.9 when you try to deploy expecially for mail server.

  CSCuc63386 Validation of email server in the initial setup sequence No.

  There was a bug in version 1.1.

  If you need help for new .ova feel free to open an SR and someone TAC will help you in this.

  Now, in regards to FQDN or IP feel free to open a SR we can do more tests, I don't expect this to and issue too long is valid and functional.

  Do not hesitate to reachout me privetly if you need help opening SR, I can do for you and take ownership.

  Kind regards

  Srdjan

• Error Java CWMS

  Java.jpg

  

  Hello

  I plan to set up CWMS 2.7 Blast Dial Configuration and change some settings on CWMS Admin > setting > Audio Funtion page,.

  I gave the number of Java,

  Y at - it an idea about my problem,.

  Kind regards

  Emine

  This is not a configurable option, Emine. She is hard-coded.

  To Bypass by pressing 1 when you join the meeting Blast Dial, we open improvements and will be delivered in CWMS 3.0. (CSCuz82338 do 'Bypass' by pressing 1...  configurable for Blast Dial meetings).

  -Dejan

• Upgrade VM CUCM 8.6 to 10.5 Question

  My situation is slightly different from what is shown here. I have a client who has CUCM 8.6.2 on VM... & would like to upgrade to CUCM Ver 10.5. What is the steps & the route easier to do this upgrade? A bit confused, with messages because it is not a migration, but a simple upgrade in the virtual machine environment.

  Thank you

  Lee

  Hello

  You will need to download the utility to the cisco site license number.

  File name

  LCUZIP - Ver9.1.2.zip

  http://www.Cisco.com/c/en/us/support/unified-communications/unified-Comm...

  Run on PC whre Editor is reachable.the file would be a consiting of CUCM MAC address, IP address, csv file installed DLU, DLU used / Unnused DLUs, licenses of BASIC/Essential, UCL Enhanced, CUWL standard etc.

  Connection to the first License Manager, after having successfully migrated from 8 to 10

  Use the following procedure to generate a licence application.
  1. connect to first Cisco Manager of licenses.
  2 in the license > Fulfillment page, select generate license request in the drop-down under
  Other treatment Options.
  3. the license request window and next steps appear. Copy the selected text in your Clipboard or click
  Save it in a file on your PC and send it to [email protected] / * / to obtain the permanent license.

  regds,

  Aman

• Missing hash MD5 CUCM/CUC Upgrade OS on page

  I have been through several improvements CUCM and CUC but, at least one of them I noticed he had a hash MD5 Checksum of lack and white in CUCM BONES page just as I started the installation.

  I understand that if it does not match the checksum of when you downloaded from Cisco / PUT which is bad, but what happened when blank/lack just in the page of the OS?

  Thank you

  Dan

  Hi Dan,.

  If it is a upgrade file that has been downloaded from cisco.com you much download again trying to minimize the interference of the antivirus, vpn etc and see if the problem persists. I've seen a few cases of TAC where this scenario was known, but the upgrade went through and I don't see a bug for this as has been seen on different versions including 7.x. You can also open a TAC case to put the file published for you and try it.

  Manish

• Upgrade CUCM 10.5 and 11.5 with Mediasense, UCCX and confirmation of the highway

  Hello everyone, I'm looking to upgrade CUCM 10.5 to 11.5 and try to find out if the version of Mediasense, UCCX and highway are supported and to confirm with the experts that I am mistaken.

  Currently I have the following text:

  CUCM/CUC - 10.5

  UCCX - 10.6.1

  MediaSense - 11.0.1

  Highway - 8.5.1

  So based on the documentation below if I go to CUCM 11.5 UCCX must be upgraded to version 11 and highway be upgraded to 8.8? MediaSense is ok here its version 11?

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/uc_system/unified...

  Thank you

  Dan

  ORC evolving documents now States that UCCX 10.6 (1) can be compatible with 11.5 (1) CUCM (plus all patches) after you install the ciscouccx.106x.cucm11xcompatible.14.cop.sgn hotfix.

  http://www.Cisco.com/Web/software/280840578/114618/Readme-UCCX-1061-UCCX...

  -Alex

• CUCM upgrade failed - migration 8.6 SU4 (2A) to 10.5 (2) SU1

  Hello friends,

  I'm trying to migrate SU4 Cucm 8.6 (2A) to 10.5 (2) SU1.

  I did like the exception pre-upgrade tasks.

  Changing vNIC, vCPU and taste-> rdht6 - 64 bit + resizing disks.

  upgrade iso file loaded successfully.

  Shortly after that the upgrade of cooling process in installation of position on the part of the installation of database component the process stopped at the 83 percent and performs reset.

  That said the logs on the upgrade?

  If he fails to step of the DB, it's usually something related to the info that is in the DB causing problems, but you must look at the newspapers.

  And FYI, migrate means you either with PCD or move to a new piece of HW, is that what you do? If this isn't the case, then you are just the upgrade.

• CUCM and microsoft azure AD

  Hello:

  Is CUCM on Azure from Microsoft Active Directory taken in charge by Cisco?

  Thank you

  It is not yet registered in the CSR 11.x design guide so official support is not yet available.

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/srnd/collab11/co...

  Manish

• PEI - SIP - CME - SIP - error CUCM Media is not Acceptable

  Hello world

  I have a problem with a TRUNK of SIP ITSP, the question is apparently "SIP/2.0 488 not acceptable media.

  I tried several things, I Don t know how to solve this problem.

  Outgoing calls is already OK, the problem is with incoming calls: of the ITSP to the CUCM.

  I have this topology of the ITSP SIP TRUNK:

  ITSP - sip sip - CME - CUCM

  The CME configuration is:

  Dial-peer voice voip 67
  Description * SIP trunk ITSP *.
  destination-model 591 [67]...
  session protocol sipv2
  session target ipv4:172.17.0.13
  session udp transport
  voice-class sip forced early offer
  no interaction of dtmf
  Codec g711ulaw

  !

  Dial-peer voice voip 68
  Description * SIP trunk CUCM *.
  reply-to address. T
  session protocol sipv2
  session target ipv4:172.16.6.3
  voice-class sip forced early offer
  Codec g711ulaw

  !

  SIP - ua
  Disable-early-media 180
  connection-reuse

  !

  voip phone service
  list of approved IP addresses
  IPv4 0.0.0.0
  IPv4 0.0.0.0 0.0.0.0
  h323 connections allow h323
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  no service additional h450.7
  no additional service moved temporarily sip
  no service additional sip refer
  Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
  SIP
  binding control source-interface GigabitEthernet0/1.5
  bind media source-interface GigabitEthernet0/1.5
  Registrar Server
  offer-early forced

  !

  On the side of CUCM:

  End point of media (checked)
  Disable the media beginning on 180 (unchecked)
  Requires the idle exchange of SDP for call Media Change (checked)
  Early support for voice and video calls (checked)
  Send send-receive SDP appealed INVITES (checked)

  The result of "debug messages ccsip" and "debug dialpeer inout voice" is:

  001062: 03:31:03: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
  Received:
  GUEST sip:[email protected]/ * /: 5060; user = phone SIP/2.0
  Via: SIP/2.0/UDP 172.17.0.11:5060; branch = z9hG4bKi2mhl410do70mrc4s141.1
  Call ID: [email protected]/ * /.
  From: "70965999"<>[email protected]/ * /; transport = udp; user = phone >; tag = 2u2uavrx-CC-1013
  To: '69200020'<>[email protected]/ * /; transport = udp; user = phone >
  CSeq: 1 INVITE
  Max-Forwards: 69
  Contact:
  Allow: INVITE, ACK, OPTIONS, CANCEL, INFO, BYE PRACK, NOTIFY, MESSAGE, UPDATE
  P - asserted-Identity has:
  Supported: 100rel, histinfo, prerequisite
  P-early-Media: support
  Content-Length: 362
  Content-Type: application/sdp

  v = 0
  o = HuaweiSoftx3000 1102026905 1102026906 IN IP4 172.17.0.11
  s = SipCall
  c = IN IP4 172.17.0.11
  t = 0 0
  m = audio RTP/AVP 8 18 116 10386
  a = rtpmap:8 PCMA/8000
  a G729/8000 rtpmap:18 =
  a rtpmap:116 telephone-event/8000 =
  a = ptime:5
  a = sendrecv local curr:qos
  a = distance zero curr:qos
  a = sendrecv local compulsory are: qos
  a = sendrecv distance optional with: qos
  a = 3gOoBTC

  001063: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
  Number = 69200020, called number = 69200020, Peer Info Type = DIALPEER_INFO_SPEECH
  001064: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
  Associate the rule of = DP_MATCH_DEST; Called number = 69200020
  001065: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
  No outbound dial-peer does not; Result = NO_MATCH(-1)
  001066: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:
  dialstring = 69200020, saf_enabled = 1 saf_dndb_lookup = 1, dp_result =-1
  001067: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
  Result = NO_MATCH(-1)
  001068: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
  Number = 70965999, called number =, Voice-Interface = 0 x 0.
  Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,
  Peer Type Info = DIALPEER_INFO_SPEECH
  001069: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
  Result = Success (0) after DP_MATCH_ANSWER; Incoming dial-peer = 68
  001070: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:
  dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0
  001071: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
  Number = 70965999, called number =, Voice-Interface = 0 x 0.
  Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,
  Peer Type Info = DIALPEER_INFO_SPEECH
  001072: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
  Result = Success (0) after DP_MATCH_ANSWER; Incoming dial-peer = 68
  001073: 03:31:03: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:
  dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0
  001074: 03:31:03: //-1/CD12136099D5/DPM/dpAssociateIncomingPeerCore:
  Number = 70965999, called number = 69200020, Voice-Interface = 0 x 0.
  Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,
  Peer Type Info = DIALPEER_INFO_SPEECH
  001075: 03:31:03: //-1/CD12136099D5/DPM/dpAssociateIncomingPeerCore:
  Result = Success (0) after DP_MATCH_ANSWER; Incoming dial-peer = 68
  001076: 03:31:03: //-1/CD12136099D5/DPM/dpMatchSafModulePlugin:
  dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0
  SIP: Attempt to analyze the attribute not supported at the level of the media
  001077: 03:31:03: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
  Envoy:
  SIP/2.0 488 Media is not Acceptable
  Via: SIP/2.0/UDP 172.17.0.11:5060; branch = z9hG4bKi2mhl410do70mrc4s141.1
  From: "70965999"<>[email protected]/ * /; transport = udp; user = phone >; tag = 2u2uavrx-CC-1013
  To: '69200020'<>[email protected]/ * /; transport = udp; user = phone >; tag = C139A0-1755
  Date: Thu, November 6, 2014 13:01:04 GMT
  Call ID: [email protected]/ * /.
  CSeq: 1 INVITE
  Allow-events: telephone-event
  Reason: Q.850; cause = 65
  Server: Cisco-SIPGateway/IOS-15.3.3.M2
  Content-Length: 0

  001078: 03:31:03: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
  Received:

  SIP GatewayTelf_JD #ACK:[email protected]/ * /: 5060; user = phone SIP/2.0
  Via: SIP/2.0/UDP 172.17.0.11:5060; branch = z9hG4bKi2mhl410do70mrc4s141.1
  CSeq: 1 ACK
  Call ID: [email protected]/ * /.
  From: "70965999"<>[email protected]/ * /; transport = udp; user = phone >; tag = 2u2uavrx-CC-1013
  To: '69200020'<>[email protected]/ * /; transport = udp; user = phone >; tag = C139A0-1755
  Max-Forwards: 69
  Content-Length: 0

  Little light at the end of the tunnel?

  Thanks in advance!

  Hello

  can you collect debug voice ccapi inout & debugging ccsip GCE message and attach the logs here please?

  your provider sends A Law G711 codec in the PROMPT message, but you have configured G711 U right in the dial-peers.

  can you try to fix G711 has the right dial-peers and check out them? Also make sure you have TPMS in the MRGL applied to CUCM SIP Trunk.