Is my BlueTooth adapted Satellite?

Similar Questions

• Installation of an adapter bluetooth on Satellite L300-1BV

  I don't know why this is but, when you install a bluetooth adapter and you have a mobile phone as a device listed in the control panel > bluetooth devices.
  and you went through the whole upward from the implementation of the device
  And then you try to connect to or from the computer, it does not connect...

  But it connects instantly if you right click on the device > select control > so that your 'bluetooth operations and parameters.
  And from there I can transfer files to and from the computer.

  But I have trouble, try to connect simply by sending a file from the phone of his self...

  Someone at - it had the same problem and can give me some advice or it's just the way it is...

  (windows vista Home premium)
  (Adapter usb bluetooth 2.1 trust)

  Last stack of BT, you can download it from the center of Information of Toshiba BT under http://aps2.toshiba-tro.de/bluetooth/

  I use it with built in the BT module and I don't know that you can use with the third party material.

• No bluetooth on Satellite C870 using OpenSuse Linux

  First of all, thanks for reading and eventually respond to this message

  I installed opensuse 12.3 x86_64 on a Toshiba Satellite C870 - 1 HR with a wifi/bluetooth adapter realtek 8723. The rtl8723ae module is running.
  Wifi works with kernel 3.10 provided by opensuse kernel team, but not the BT. bt kernel modules are loaded, kde recognizes the bt stack, but not access.

  hcitool dev
  Feature:

  and

  rfkill list
  0: hci0: Bluetooth
  Soft blocked: no
  Hard blocked: no

  However, I have discovered with dmesg:

  8.347377: HCI device and connection manager Bluetooth Initialise
  8.347389 Bluetooth: socket initialized HCI layer
  8.347391 Bluetooth: L2CAP initialized SSL
  [Bluetooth 8.347399: initialized SCO socket layer]
  8.350732 ACPI WARNING: 0 x 0000000000004040-0x000000000000405f SystemIO comes into conflict with the \_SB_ region. PCI0. SBUS. SMBI 1 (20130328/utaddress-251)
  8.350739] ACPI: If an ACPI driver is available for this device, you must use it instead of the native driver
  8.356121] usbcore: registered new interface driver btusb

  rtl8723ae 8.759901: using the rtlwifi/rtl8723fw_B.bin firmware
  8.875659 ACPI WARNING: 0 x 0000000000000428-0x000000000000042f SystemIO comes into conflict with the \PMIO region 1 (20130328/utaddress-251)
  8.875666 ACPI: If an ACPI driver is available for this device, you must use it instead of the native driver
  8.875670 ACPI WARNING: 0 x 0000000000000530-0x000000000000053f SystemIO comes into conflict with the \GPIO region 1 (20130328/utaddress-251)
  8.875674 ACPI WARNING: 0 x 0000000000000530-0x000000000000053f SystemIO comes into conflict with the \GPXX region 2 (20130328/utaddress-251)
  8.875677 ACPI: If an ACPI driver is available for this device, you must use it instead of the native driver
  8.875679 ACPI WARNING: 0 x 0000000000000500-0x000000000000052f SystemIO comes into conflict with the \GPIO region 1 (20130328/utaddress-251)
  8.875681 ACPI WARNING: 0 x 0000000000000500-0x000000000000052f SystemIO comes into conflict with the \GPXX region 2 (20130328/utaddress-251)
  8.875684 ACPI: If an ACPI driver is available for this device, you must use it instead of the native driver
  lpc_ich 8.875686: resource found on gpio_ich
  8.888936 ieee80211 phy0: rate control algorithm selected "rtl_rc".
  rtlwifi 8.889107: wireless switch is on

  Any idea?

  Hello

  Your problem is a little weird!

  Your wireless network card is a BT / WLAN combo and should be supported by the kernel used in openSuse 12.3.
  Check the functionality in Windows or any other end Linux distribution?

  I would say to download Fedora 19 and run as a direct medium OS to check the operation of BT.
  If it works fine, I belive there is a bug in the distro openSuse.
  If this isn't the case, I really think you should consider checking your hardware.

  I have the same card in my works C850 and BT just perfect in Fedora 19.

  Hope this helps you out

  Tom BR

• The local Bluetooth adapter has no indefinite way

  Hello

  Every time after reboot of my PLUA1E Satellite Pro U200-02802QS4 with Vista Business 32-bit I get this error:

  Log name: System
  Source: BTHUSB
  Date: 26.11.2009 15:26:07
  Event ID: 17
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  The local Bluetooth adapter has failed in an indefinite manner and will not be used. The driver has been unloaded.

  The latest Bluetooth driver is already installed.
  How to solve this problem?

  Have you tried to remove the preinstalled BT stack and install again?

• Exclamation point on generic Bluetooth adapter

  Hello

  There are exclamation on generic bluetooth adapter in the list of drivers
  After you have installed bluetooth monitor.
  Please help me solve the problem.

  Thanks in advance.

  After reading your ad I can only write that you need to install the battery Toshiba BT.

  Maybe you should help us to better understand and write which laptop model yu have and what operating system you are using.

  Have you installed a clean version of the OS?

• I had one for my Ipod Touch dock adapter model MC540C/a and I wonder if I can get a bluetooth adapter that is compatible with my dock adapter?

  I had a dock adapter (photo attached) for my Ipod Touch model MC540C/A and I wonder if I can get a bluetooth adapter that is compatible with my dock adapter?  Thank you!  Luc Roy

  Just what do you mean?

  MC540C/a is a 4G iPod touch and it has Bluetooth construction

  iOS: supported Bluetooth - Apple Support profiles

• Jabra A320s Bluetooth adapter not recognized by Toshiba Stack

  Hello, I have a Jabra A320s Bluetooth adapter (Broadcom Bluetooth 2.0 EDR dongle) and after the installation of the battery of Toshiba Bt 5.0.1 for Vista does not recognize my device. Ask me every time "If please, plug the Bluetooth device and click on the Ok button" and my Bluetooth device is pluged. I have no problem with my adapter Linksys Bluetooth 1.1. Also, I previously installed stack Broadcom and the drivers for my Jabra A320s (obviously, I now prefer the Toshiba one), I uninstalled it and I got the same message "Please plug in the Bluetooth device and click on the Ok button" configure the stack of BT from Toshiba. Can someone help me?

  Hello

  This seems to be a problem of the current Release v5.10.01. This will install only on the internal modules.
  In order to work properly, you must first install v4.xx.xx. After that your can reinstall v5.xx.xx without problems.
  This way I got it on my side.

  CU
  DM

• Series P30 Microsoft bluetooth mouse & satellite

  I bought a microsoft IntelliMouse Explorer for Bluetooth with a USB BlueTooth adapter.
  I put the adapter and the bluetooth connection works well. I was able to communicate with my cell phone.
  But not my new mouse. On another computer, it works fine. On mine I can' install the driver. When I search on bluetooth devices, the mouse, it is recognized, but when I open again the bluetooth devices, there is no show.
  The driver for the TouchPad is crushed with PS2 IntelliMouse... and my mouse does not work.

  Can someone help me?

  Hello

  Unfortunately, it's not easy to say why it doesn t work.
  Is - what the other computer has a touch pad or an extra mouse driver?
  There may be some conflicts with the touchpad driver. You can try to remove the touchpad (Alps Touch pad Driver) driver, and then test the Microsoft Bluetooth mouse. Maybe after this procedure the mouse will work correctly.

  Good bye

• Is it possible to recharge an iPod Classic when using a Bluetooth adapter?

  I recently bought a bluetooth adapter so that my music on my iPod classic to play via a bluetooth speaker. However, I'm worried about the battery in courses run is used throughout the evening for a party. Is there a way using the adapter and load cycle at the same time? Thank you

  If the Bluetooth adapter is the type that connects to the iPod dock connector (not the headphone jack), you can't charge the iPod while the dock connector has the Bluetooth adapter connected.

• Found usb bluetooth adapter in 626 x box? Where the application overview?

  I just bought a replacement to my 2009 Enterprise edition ReadyNas Pro success. I have contributed the most to the RAM and upgraded the processor in the old horse in 2009 and it has been amazing ever since, but recently the lower power supply fan seized completely it is time to retire the old box and upgrade!

  So, I bought a 626 X last week and it's currently sitting in my living room. I'm waiting for an update of backup on USB to finish at the old box, then I'll change the disks of 6x2tb of place in the new unit and restore the backup.

  Unpacking of the new kit, I found a USB bluetooth adapter that is stuck inside the box. Around the navigation, I found mention of a 'insight' phone application that uses bluetooth. I can't seem to find it either in the app store of apple or android and I saw other a designate as beta.

  Anyone has any info on this app or what can I do with the bluetooth dongle?

  Hi Cpitchford,

  Application overview is not yet officially published, please wait.

• Bluetooth on Satellite L500 does not work!

  Hey well im disappointing defetly of Pentecost suport of toshiba, they never anwser mi email, and when I call for the support that they did not fix the problem mi! After 2 monthas waiting they never remember!

  My Bluetooth on Satellite L500 does not work! I have upgraded from vista to 7 suport said that I probably had to put the Vista pc again to install the bluetooth, and upgrading them to 7. IM whit vista of Pentecost after using the restore cd.

  After that I read some post and install the drives still does not work!

  I try to install bluetooth monitor, then the battery Bt when battery is installing wask me to activate the bluetooth I use Fn + F8 and the battery does not install it!

  Any tips?

  Just do so for sure:
  You have enabled your wireless switch?

• X 230 Bluetooth adapter not detected on Windows 10

  I recently had the X 230 device I use put to level 10 Windows to a new facility (does not pass Lenovo restore feature). Since then, I noticed that I am no longer able to activate or to detect the bluetooth adapter after the upgrade. I tried to download the drivers, but also for Windows 10 but still power management software could activate / not detect. Things I noticed:

  1. There is no mention of a bluetooth Device Manager device (or as a category of bluetooth, nor as a network adapter.
  2. Performing with Fn + F5 does not work as it is the switch of the machine in airplane mode. Press them will take the machine off of airplane mode. (I also installed the hotkey software).

  I used to be able to manage wifi and bluetooth devices using wireless Lenovo return assistance when I was still with Windows 7 if the material is "absolutely" there.

  Thoughts? Thanks in advance for the help!

  OK, so I was able to solve my problem of bluetooth in upgradinv the BIOS/UEFI with the latest firmware. After a reboot, voila! The bluetooth device has been detected. Now, the interesting thing is that there is no option to turn off the radio, unless disable you it in Device Manager.

• Generic bluetooth adapter HP 630 notebook PC window 7 ultimate 32 bit

  Dear HP consulting

  Generic bluetooth adapter in Device Manager does not work and therefore bluetooth

  Ultimate de Windows 7 PC portable HP 630 32 bit

  It corresponds to the hardware as described in the device id

  USB\VID_03F0 & PID_311D & REV_0001
  USB\VID_03F0 & PID_311D

  Help, please

  Sograt

  Hello:

  You need this driver for bluetooth...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5086783&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_95054_1%257CswEnvOID%253D4055%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP Pavilion dv7 Bluetooth adapter no longer works

  HP Pavilion dv7.  #ABC product number WQ641UA.  My built-in bluetooth stopped working a few weeks ago. It caused an error from Outlook that seems turned off the bluetooth adapter.  Yesterday, the HP support assistant recommends an upgrade of the Bluetooth software for the wireless Broadcom 43224AG card.  Software will not load because it cannot detect the Bluetooth adapter.  I don't know how to re-enable the bluetooth feature.  It does not appear in either the BIOS or Windows Mobility Center.

  Yes... seems to be a problem with the hardware only. As a result of the manual, you can also try reinstalling the Bluetooth card once.

  You can get the Bluetooth card replaced either by calling technique supports directly or if not under warranty you can order it online at HP parts store. You can buy the piece by calling technical support also.

  HP parts store

  Enter the serial number and the number of the product in the link above and it will show you all the spare parts available for your laptop. The contact number for Bank of parts is also listed in the link. If the part is not available it also will show you all dealers allowed to the Canada.

• Photosmart 3210: BLUETOOTH ADAPTER for PHOTOSMART 3210

  I have an old Photosmart 3210 all-in-one printer still works fine.  I want to make it wireless using a bluetooth adapter.  The recommended is bt300.  Y at - it a newer version that would work? I don't think it sells more.

  Hi @SW-NewtownPA,.

  Welcome to the Forums of HP Support!

  I see that you are wondering if you can use a bluetooth adapter that is different than that of your printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I don't know if you can use another bluetooth adapter, but the manual indicates that the HP bt300 and HP bt400 work.

  Manual

  Login your HP all-in-one are equipped with a USB port you can connect directly to a computer via a USB cable. You can also connect your HP all-in-one to a wired network. If you insert a bt300 HP or HP bt400 series adapter printer wireless Bluetooth® in the front USB port, Bluetooth® devices such as PDAS and camera phones can print to your HP all-in-one. Note in the rest of this chapter, the bt300 HP or HP bt400 series Bluetooth® wireless printer adapter is simply referred to as an HP Bluetooth® adapter.

  To see if these adapters are still available, or if you can use other adapters, I would call the HP parts store.

  To order HP computer and components of the printer parts by phone please call 1-800-227-8164 Monday-Friday 07:00 - 7:00 pm CST

  Hope that answers your question. Thank you for posting!