The local Bluetooth adapter has no indefinite way

Similar Questions

• Satellite M30-S309: cannot change on the local network adapter device

  Hello

  My name is Sebastian and I have a Satellite M30-S309 I can't configure IT the Connection WiFi.
  The drivers its OK (and reinstall) the LAN, but the WiFi RADIO network ok is OFF, have any opportunity to step ON this Board?

  I reinstall the KEYBOARD shortcut, but I think that the app or utility for the Fn + F8 key and the LED does not.

  Any can help me?
  Thanks in advance,

  S.

  You said the LAN is ok, but are you sure that the wireless network adapter has been installed on this laptop. Please check in the area to network adapters Device Manager.
  If the wireless network adapter has been installed, you should see the wireless network card in this area. As much as I k now the Wlan switch on the front of the laptop works only if the wireless network adapter has been placed.

• Network Diagnostics says "connection to the local network 2 has no valid ip address.

  Dear Sir/Madam,

  I use the computer dell laptop windows 7 Home premium 64-bit. Usually, I connect my laptop to the internet through wifi modem. It connects automatically to him and there is no problem. But suddenly, the connection is not showing this wifi but signal showing other signals. I plugged the cable, but not showing also no internet access, then I used the diagnosis then he showed "connection to the local network 2 has no valid ip address" other devices such as my phone, etc. are connect to this wifi normally.
  As there is no internet connection on my laptop, I downloaded "microsoft fix it" and installed in my laptop to another computer but it does not work, he showed me 3 tabs IE to read, etc. to fix it it is opening chrome Web site as there is no internet facility, displays "cannot display page" Web page
  so, please help me with this problem. feel free to ask all the necessary questions.
  Thank you
  Vandenplas, infant.

  Hi Vandenplas,

  Method 1

  Follow the advice given by Meghmala Feb 17,2010 on the thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/local-area-connection-does-not-have-valid-ip/72c61d55-4d20-48bd-80bf-cb25f7b95cb6

  Method 2

  Check the steps on the thread: http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-7&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Also check the discussion on the thread:'t-have-a/43ea076e-5210-4194-80d8-cb4681e852a0 http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/issues-found-local-area-connection-doesn

  If nothing helps, you can try to contact your ISP and ask them to reset the settings.

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

  Thank you!

• I reinstalled windows 7 in my dell with a hard drive recently changed. all these mistakes came after him: "windows has detected a problem with the generic bluetooth adapter," continues...

  "Bluetooth adapter", there is no driver installed for the SM Bus controller ' and "there is no installed driver for network controller" Please help!

  I downloaded all the drivers I could from dell.com and install, still nothing. Troubleshooting Microsoft, nothing.

  Hello

  Have you received an error code?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  See the following links for more information:

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  Method 3:

  I suggest you to see the links and check.

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  See also:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

• Reset the connection to the local domain adapter

  I am running Windows 7 and I leave my computer on 24-7 for downloads of the weather and I struggled with it stay connected, I lose my local connection to the network at different times of the day, I can do to fix this?

  Hi Clyde, sorry you asked

  How you connect to your network in your home?  Wired or wireless?

  One thing to check is...

  Click Start

  Click on Control Panel

  In the upper right corner of the screen, type network

  Click on network and sharing Center

  on the left side of the screen, click on change adapter settings

  Once again depending on how you connect, wired or wireless

  Click the appropriate connection, I'm guessing that you're wired for the sake of this example

  Right-click on the connection to the Local network

  Click on properties

  Click on configure

  Click the power management tab

  Make sure that it is has nothing enabled which could put the network card to sleep

• Bluetooth icon tray disappears after turning off the USB bluetooth adapter in the system tray

  You seem to have a problem with your bluetooth icon. If you cannot match something you can try to remove the device and then put it back. I tried it didn't work. Then, you may need to disable bluetooth adapter on the icon. But if you do that you cannot turn it back on because the bluetooth icon status bar disappears when the adapter is disabled. Also it does not appear in "peripheral" that the adapter is turned off. You must go to the C:\Program WIDCOMM software and double-click BTTray.exe to redisplay the icon, and then turn on the adapter. Come on Microsoft, surely it would be easier to just gray exit icon at its stop, then your right click the greyed to activate the adapter turn it back on. Simple really.

  Follow this link: http://social.technet.microsoft.com/forums/en-US/itprovistanetworking/thread/b09708cd-6c63-4073-b27f-f853aa5a5dc0/

• We were able to make remote export of the schema to the local computer that has only Oracle Client can

  Hello

  I tried to export a schema from a database of remote 10 gr 2 RHEL on my local desktop which has Oracle 11 g Client (Windows), but it ended with following errors

  EXP-00008: ORACLE 942 error encountered

  ORA-00942: table or view does not exist

  EXP-00024: Export Export not installed views, please notify your DBA

  EXP-00000: export completed unsuccessfully

  The query I used is: owner username/pwd@remotedb exp = someuser leader = D:\someuser.dmp log = schema.log

  I need to transfer the dump file on another server in RHEL test.

  Can I export using the Oracle customer or I need a database to start remote export?

  PS: I asked me not to use Datapump for some reason any.

  Kind regards

  Germain

  It can be done, but you need to export using 10 g client.

• the local network adapter is disabled after reboot

  my internet connection status displays a caution symbol every time at startup and I can't access the internet until I have turn off the connection and then use troubleshooting which is good, but it doesn't tell me how to solve this problem permanently how it stop be disabled whenever I restart my pc?

  Hello
   
  1. don't you make changes before the show?
   
  We recommend that you follow these steps and check the result.
  Step 1: Disable network card power management settings.
  1. click on start, type devmgmt.msc and press to enter.
  2. from the list of objects, expand network adapters.
  3. double-click on the element sub under network adapters.
  4. click on the power management tab.
  5. clear all the options on the power management tab.
  6 apply the settings, and then restart the computer to check the difference.

  NOTE: Make sure that you have installed the latest network adapter driver.
   
  Visit this link for more information on "Troubleshooting network adapter problems":
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Local disk C has the least space, where the Local D drive has much more space: problem is drive C starts instead of because...

  I had to reinstall XP. Before reinstallation, D drive was the drive started on my computer and I have not had any problems with space. Obviously I screwed up letting it keep the partitioned drive or what I had to do at some point, because after reinstalling XP C drive the drive that begins (C has no space and D wants everything as before). Now, I don't have enough space to download programs, I need to work from. In fact, I don't have enough room to do anything! C drive only has 7. something GB on it compared with with 30 0r 32 GB!

  How can I get the D drive and do what is now drive C? Alternatively, I can change somehow D drive where all downloads to go and work from there anyway? I don't know how to change where a download will. Can someone please help me out here because I'm way behind with work; cannot afford professional maintenance COMP.; and have no idea what to do.

  Hello

  You may need to back up important data on the computer and and then format the D; drive to remove all the installation files and creates the disk space.

  Also I suggest you perform a disk cleanup on the computer. To get the procedure you can refer: Description of the tool in Windows XP Disk Cleanup: http://support.microsoft.com/kb/310312

  And uninstall unwanted computer programs, see: remove programs you don't need more: http://www.microsoft.com/windowsxp/using/setup/maintain/removeprog.mspx

• In trying to retrieve the IP address, I get a message "connection to the Local Ethernet adapter, State media... network: media disconnected".

  Original title: connections to the LAN

  I can't establish an internet link. When I go to the command prompt to retrieve my IP address, I get a response stating, "ETHERNET ADAPTER LOCAL AREA CONNECTION: MEDIA STATE...". MEDIA DISCONNECTED. How would I fix this? Thanks for your help

  Hello

  Follow this procedure to ensure that the network the laptop is on and configured correctly.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows has stopped the device because it has reported problems. Code 43 with generic bluetooth adapter.

  Windows has stopped the device because it has reported problems. Code 43. Something with the generic bluetooth adapter. What should do?

  Original title: Please help

  Hi JovanaNesic,

  One of the motors controlling the unit notified the operating system that the device has failed in some way.

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• Bluetooth adapter missing after upgrade to windows 10

  Hi all

  Recently, I've upgraded to 10 64-bit Windows on my Dell Vostro laptop. After update, Bluetooth adapter has disappeared from the Device Manager. I have the old drivers for win 7, but these are not being run as the message said "this application cannot run" or things to that effect. I tried to install the Lenovo drivers as suggested, but this is not successful because he wants me to uninstall existing bluetooth drivers. For the life of me I can't find these anywhere. Any suggestions?

  Bhatta,

  You can click on the link below to see the youtube video that shows a possible resolution for your Bluetooth to work.

  https://www.YouTube.com/watch?v=CTo6PZ-QFqU

• cannot connect to the local network using windows 7

  Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

  Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

  Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel connection to the Local network adapter * 9:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. :

  State media: media disconnected

  The connection-specific DNS suffix. :

  TEREDO TUNNELING Pseudo-Interface tunnel adapter:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. our field: *

  State media: media disconnected

  The connection-specific DNS suffix. :

  I tried to turn off the firewall and connect without success

  My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

  Any help would be appreciated

  Thank you

  Well Yes! So it was an older version of the bonjour service... thank you Adobe.

  You can find the latest version here:

  http://support.Apple.com/kb/DL999

• You use a bluetooth headset while it is also connected to the Digital AV adapter

  I run on a treadmill at the gym who has a digital AV adapter for television in front of me.

  Normally, I have to plug my Wired headphones to the plug supplied at the gym, who returned from the TV.

  I was wondering if I can use my bluetooth headset (which easily pair it with my phone) to listen to the audio from my phone when it is connected to the Digital AV adapter and play the video on the TV?

  This way, I would have the video on television, but the audio through my wireless headset.

  NOTE: I previously noticed with my wired headset, that if I plugged the AV adapter first and then plugged my headphones directly into my phone, I could get the audio directly from the phone (as opposed from the plug that is connected to the TV). So I was hoping that this could also be done with the wireless headset.

  Thank you

  I figured out how I could do.

  When I attach the adapter Digital AV, video and audio will play through the TV.

  With the Bluetooth headset connected to my phone, I can switch the "AirPlay" parameter from the control center from TV to my bluetooth headset.

  This keeps the video playing on the TV (via adapter), but it sends the audio to my bluetooth headset. Perfect!