Installation of an adapter bluetooth on Satellite L300-1BV

Similar Questions

• Satellite L300-1BV - how to connect to the TV?

  Hello
  Should what cable I plug the Satellite L300-1BV to my TV?

  Thanks for the answers in advance

  Hello

  What video ports you have on your Satellite L300 of output?

  I have the Satellite L300 too but he has only normal VGA output. This means that I m using a cable RCA VGA adapter to connect it to my TV. After that I connected the cable that I turn on the TV and then the laptop. On the laptop, you can switch between monitors now with FN + F5.

• Satellite L300-1BV and fatal issues with WXP

  Hi guys -.

  Very well. My Toshiba Satellite L300-1bv, loaded with a copy of Windows XP SP3 home edition, started having glitches and slowing down questions that grew progressively until it would completely freeze after a random interval of time. Try to boot now returns a missing hal.dll error.

  I'm almost certain, given the characteristics of this that the hard drive is a failure, mainly because he began to thrash continually without reason a few months in him. On the other hand, it could be a mistake of memory through Google diagnostics.

  I ve managed to install a copy of Windows XP Home SP1 edition on a new partition (the one broken leaving intact), but I don't know how long it will continue to operate in light of a possible hardware failure so I don't want to commit.

  Any help would be massively appreciated.

  Hello

  What assistance do you have exactly?

  As you say the problem could be related to a hardware (RAM, HARD disk problem) or software (missing hal.dll, corruption of the operating system) problem

  If new OS installation (with all patches, service pack) no did not help, then a problem of material is possible in this case, replace defective parts
  No one can say what part could be corrupted it s is necessary to test means that the RAM or HARD drive needs to be replaced and then you could test how it works

  PS: there is a nice tool to drive HARD HDD Fitness called diagnosis test for google's free simply

• Went empty Suring battery installation - now I can't start Satellite L300

  I bought a new Satellite L300 and installed installation went empty for the first time - during the process.
  No more chance to install again, no CD available, software (Vista Edition home premium) must be started from the hard drive that does not work in this situation.

  Any idea?

  Hello Nile

  When I read something like that I can just laugh. Sorry, but I can't believe that do you something like that. It makes sense that any new device must be connected to the power running especially for the first start.

  In any case, your only chance is to try to follow:
  Connect your laptop to power current
  AutoScan the laptop and press F8 several times to load the advanced startup options
  Choose the option to fix my computer
  In the next window choose recovery Toshiba (the last option)
  And follow the on-screen menu.

  If you are lucky, you will be able to reinstall the OS but I'm not sure about this.

  Last option is to order original Toshiba recovery DVD under https://backupmedia.toshiba.eu/landing.aspx

  Bye and good luck

• Can satellite L300-1BV - I ask Toshiba for the installation CD?

  Hello

  How could I go ask Toshiba for the installation CD? My laptop (L300-1BV) came with the pre-installed operating system, so I can ask them for the CD?
  But I don't know how I'd go to this topic.

  Any advice?

  Hello

  I think you mean the Toshiba recovery disc. Is this correct?

  If yes you can create yourself Toshiba recovery disc. So start the Toshiba recovery disc creator to create this diskette.
  This disc you create operating system preinstalled with all the drivers and tools of Toshiba. It s also called settings factory or let's say the same thing that you started the laptop time first.

  Normally, you get a recovery reminder message and I think that this information could be useful for you:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Upgrading processor on Satellite L300-1BV

  I've already updated the laptop of a T1600 (Celeron), to a T3200 (Pentium Dual Core). But no one knows how far I can go to level P 478 processors?

  If so, could provide you the processor numbers?

  + The message was edited: model number changed on the subject.

  Satellite L300D-1BV is know for me. This model number is correct?

  However, in general, you should check the compatibility of the chipset.
  Where the chipset is compatible and would support the CPU, you have good chances to make it work.

  But I'm not sure if BIOS would be able to manage the new processor properly.

• LCD screen triggers - Satellite L300-1BV

  Hello

  Recently bought a L300-1BV, for a pressie Christmas for my daughter, I was put to her.
  Sometimes the screen turns off and you do not see the screen, although it seems as if there is little light
  If you move the cover, it can cut and move the cover/screen, it may or may not come back, one day it's ok and not another

  Someone at - it any ideas what the problem could be

  Thank you

  Steve

  Hello

  > If you move the cover, it can cut and move the cover/screen, it may or may not come back, one day it's ok and not another

  To me, this looks like a connection problem. Maybe some loose cables etc.
  The FL inverter is one part he control the LCD backlighting.
  Perhaps this part of malfunctions, but please understand that it is not easy to say what the problem might be exactly.

  I think you should communicate with MS in your country as soon as possible. The laptop is under warranty and everything should be done for free.

• Order of installation of drivers for WinXp on Satellite L300 - 14G

  Hi, I would like to use Windows Xp instead of Vista on this system.
  I have Xp running, but it seems that it is important to install drivers in the correct order.
  Can someone help me on this?

  Thank you very much in advance,
  Peter

  Post edited by: PeterZ

  It seems that the title of this section has been changed. I got some of the pilots before the site went down, my biggest problem is the good order of their installation.
  I already have:
  (1) chipset Utility
  (2) sound
  (3) webcam
  (4) WLan
  (5) Lan
  (6) display

  If I really need something else which must be instaled between those mentioned above, a link to it would be welcome because the site is down and I really want to make it work.

  Post edited by: PeterZ
  Title changed to the best description

  Hello

  Hmm I recommend starting the installation with some essential drivers graphic driver, touchpad drivers LAN/WLan driver and its pilot, etc.

  Then you could try to install some Toshiba Utilities

  Check it out!

• Re: Satellite L300-1BV - create your recovery disc ISO images

  I wondered about this.
  Could make my recovery disc ISO images, I know I could just make a few extra copies, but I am learning to create ISO images.
  But I was a little worried about what would happen when I put a disc in the drive...

  This along with the recovery image is a bit complicated, and something like this is not possible.
  All you can do is create recovery DVDs using Toshiba recovery disc creator or directly start the HARD drive recovery using recovery Toshiba (F8) option.

  You can do with it what you want but how you want to start the installation later?
  Sorry, but I think that it will not work.

• Satellite L300-1BV you can file a copy of the recovery disks

  Hello
  Just out of curiosity.
  I have not tried, but I heréd you can make a copy of the recovery disks, using the toshiba disk creator.

  I just thought it would be faster posting this question, rarther than to try.
  I don't know it costs £30 for a copy of the recovery disks, which led me to think are for people who did not create recovery disks or people who lost it copy recovery disks.

  I myself only one copy

  No, you can do as much as you want. But it only works on the L300

• Re: Satellite L300-1BV: I want to use Draft N - how to disable Wlan in BIOS

  I think trying a new network adapter, which has the N Protocol.

  But I was told its best to disable the network adapter in the BIOS first realtek wireless and not Device Manager as I thought.

  So basically what the correct way to do it in the BIOS instead of me in there without real knowledge of where to look.

  Any advice on this...

  (windows vista Home premium)

  Hello

  I put t think the BIOS contains such option, that could allows you to disable the internal WLan function.

  If you want to use Draft N (802.11 N) using an external adapter (WLan USB stick), then I don't see any other solution to disable the wireless card in Device Manager.

  But to be honest I do not know if disabling the internal WLan card is required m
  I expect that you would not need to disable the internal WiFi network in order to get the other treatments of the WLan card.

• Satellite L300-1BV - series of blue screens

  Hello

  normal startup - impossible

  safe mode - for 5 minutes of most, the screens, then blue, giving various critical errors

  -checked with a Vista Ultimate DVD to reinstall the OS, do not:

  "error - \windows\system32\ntkrnlpa.exe file is missing or damaged.

  I ask me to insert the original CD (DVD) installation.

  I don't have one.

  Where I can get one? Any solution is welcome.

  Thank you

  Hello!

  The ntkrnlpa.exe is part of the operating system. This means that it should normally not a problem software or driver.
  To me it sounds like that, your Windows installation is damaged and I think that there is no other way except reinstalling Windows.

  You can reinstall Windows Vista if you go into the advanced boot menu and select Repair my computer. After a few seconds, you can choose the Toshiba HDD recovery option that reinstalls Vista again.
  It only takes a few minutes and after that relocation, you must create the Toshiba Recovery disk because it sounds like that you didn't create a still. So start Windows Toshiba recovery disc creator and you need 1 or 2 DVD-R discs.

  Good bye

• Satellite L300-1BV - error windows could not start

  When I try to start the laptop it know
  "Unable to start windows. To address the recovery of insert problem disc etc, but I have nothing of this
  below it I got an error message

  file: \windows\system32\winload.exe

  STATUS: 0XC000000F

  Info: the selected entry could not be loaded because the application is missing or corrupt

  can anyone help?

  Of workaround I posted in another thread, but it should work in your case too.
  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  Goodbye & good luck

• Satellite L300-1BV case in bulk and seems like loose hard drive

  Hi, not a huge problem but just thought I'd get extracted. Case seems to be its loose where I left my arm on the black band near the mouse and power buttons, like when I rest my arm when you type it clicks and squeaks on the right side and getting on my nerves. (Don't ask).

  Another thing, the hard drive seems to loose, since that is also clicking on. I tried to tighten all the screws available as I can see, but nothing has changed or helped... everyone knows a similar problem? Don't want to send it so that can be helped because it will take a while to come back and I need to use the laptop every day for work.

  Thanks in advance.

  Hello.

  It seems you have weird problems with your laptop. I think you did some updates to the laptop and now you have these problems. The Panel of the black band, if you see a space between the mouse control panel and the microphone at the entrance, you have left a black thing (square shaped) somewhere before you put everything together. This black thing is used to cover the wireless switch. Also, if it could not solve the problem, it is normal if the gap occurs after a bad upgrade.

  Yoru driver drive HARD, there are several reasons for this. * I propose to restore the laptop to the service to check * I hope you didn't break the security bulletin or they will charge you a bit.

  Kind regards.

• Satellite L300-1BV - put 'gpedit.msc' on Vista Home Premium

  Hello.

  I did a search on involvement gpedit.msc on vista Home premium, there are a few methods to do, now it works for some people, but other people have problems.
  I was just checking to see if someone similar to me and has a similar laptop, has managed to achieve this.
  I saw had a link and was about to try this method until I saw the comments at the bottom, where the people had stuck and some had managed to do...

  http://www.techmynd.com/enable-grouppolicy-gpedit-for-Windows-Vista-Home/

  So basically instead of trying me this method, I have while I post this question to see if you can actually do this, or are - this all simply not possible...

  There are already files in the system32 folder, such as "gpedit.dll" "gptext.dll" "fde.dll" "wsecedit.dll".
  And I also have the LmCompatibilityLevel registry '3 '.

  But even if some people have managed to do this, it must be possible...

  Thanks for the replies.

  Vista Home premium 32-bit

  Thanks for the link. In the past, I didn't come through this theme, but this seems very interesting to me.
  Let's see if someone here can write comment or experience with this.

  By the way: I am not so familiar with this and would like to know what you expect if it should work?