Is nano Transceiver controller of xbox 360 compatible whit PlugAnd Go wireless?

Similar Questions

• problems of xbox 360 with windows xp sp3 wireless receiver

  problems of xbox 360 with windows xp sp3 wireless receiver

  Hi Frank Lucas.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can see the steps outlined in the article below

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  You can also post your query on Xbox Forum

  http://forums.Xbox.com/

• Does not not a controller to xbox 360 on windows 7

  I as had previously been suggested here uninstalled and reinstalled the drivers twice. It is one of my three xbox 360 wired controllers always saves not.

  It does not appear in "Microsoft 360 accessories status" or "Game controllers" but it * IS * appear in Device Manager.

  In addition, nothing is shown on the ring of light, except the flashing "Searching" which occurs whenever I press the button 360.

  Hi klaus6622,

  I suggest you to run the troubleshooter under construction: open the hardware and devices Troubleshooter:http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Also, try the steps listed in the links below:

  Troubleshooting your Xbox 360 Controller for Windows:http://support.xbox.com/support/en/us/xbox360/kb.aspx?ID=908888&lcid=1033&category=hardware

  How to connect your Xbox 360 wired controller to a computer running Windows:http://support.xbox.com/support/en/us/xbox360/kb.aspx?ID=906347&lcid=1033&category=hardware

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• A Nano transceiver can be shared for keyboard Arc and 6000 wireless mouse?

  Hello

  I have two Microsoft wireless products: an Arc keyboard and mouse wireless 6000.

  They have both a wireless transceiver Nano using 2 USB Sockets.

  My question is: a Nano transceiver can be shared?

  Thank you!

  Jim Wang - MVP Dynamics CRM - http://jianwang.blogspot.com,http://www.mscrm.cn

  Hi Jim,.

  Sorry to inform you that Nano transceiver can be shared to 6000 wireless mouse and keyboard Arc because there will be defined for each devices frequency and by sharing the frequency will be inconsistent.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Thanks to the Xbox 360 with Qosmio G30 controller

  Hello

  I try to use the controller to xbox 360 with evo pro soccer 2010 on my laptop.
  As a first step, it flickered, but then it stopped.

  Drivers and everything installed correctly, is there another way?
  In Device Manager, there is no exclamation point, it seems fine.
  But the game won't play, unless I use the keyboard.

  Hello

  The controller is maybe defective.
  Have you tested on your Xbox 360 and it works?

  You can also test a different controller?

• How can I connect my xbox 360 controller to my iMac (last updated: mountain lion)? I bought star wars force unleashed on AppStore and it said only 360 controller can be used then, how can I connect to my mac? I have the wire on the load control

  I bought star wars power of the force on the apple app store. It says that i can use the controller to xbox 360 to play other than keyboards. now how to connect the controller 360 for mac? I have the charger cable to connect to the controller that has a usb key that I have connected to my iMac (desktop), but this isn't like the ps3 where he worked. Help, please! I have the latest version of the update of the iMac, which I believe is the mountain lion

  Not sure if this will help. Here and all over the web search will show that you mixed results.

  Try this download. I have a new Macbook Pro El Capitan 10.11.3 running. Just installed this to use my old Xbox 360 wired controllers USB to play Lego games. Despite the mixed reviews, this seems to have worked perfectly and actually gives you an ability to customize the controller.

  Al https://github.com/360Controller/360Controller/releases/tag/v0.15_beta5_unoffici

  NOTES:

  (1) it is Beta version 5; newer than all the other versions of this utility I saw reviewed about the feature. You may need a different version because your version of iOS, but I'm not an expert here.

  (2) once installed and the computer restarts, you will find the utility as a new icon in the system preferences (the gear in your dock icon, probably), not applications, utilities, etc.

• BSOD Xbox 360 controller

  Today, I bought a controller wired xbox 360 for windows, and I got the blue screen of death... I soon realized it was a problem of current when it search the Internet, but so far I can't find a solution.

  As soon as I connect the controller to the computer hangs and gets the blue screen. I tried to remove the drivers and use it and redownloading drivers, but all came to the same result. I bought this controller thinking would it be a hassle free plug and play, but I guess that's life.

  In any case please help, I don't want to play with a keyboard super meat boy. :(

  blllluuuuuurrrrrghhhhh vista 64 bit... I reformatted my HD to Vista 32 bit... anyway... you have the latest drivers from HP?

  Site link:-http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2100&lc=en&cc=uk&dlc=en&sw_lang=&product=3789775

  Already put in your pc and the operating system for you... There is some bios downloads and I noticed that there are a couple of fixes for Windows vista with blue screen :) for

• How to connect a xbox 360 controller to a windows XP PC?

  With the help of a USB adapter that plugs into the top of a wireless controller. I installed the drivers and 360 accessories, but my xbox controller will not connect to my PC. Windows recognizes the controller when it is connected, but the controller will not connect.

  Hello AlexB2008,

  You can refer the links that will give you information on connecting Xbox controller below:

  Connect a game controller

  Xbox 360 Setup

  Xbox 360 Wireless Controller: Controller disconnects or is unable to connect to your console

• Xbox 360 controller not working not not windows 7 (detected in Device Manager, still does not)

  What I have
  Xbox 360 Wireless Controller (with the cable that allows you to connect it to the photo that is wired)

  This my problem
  I connected the Xbox 360 controller to my pc via the cable, it is detected in Device Manager as 'wireless controller xbox 360 Via play & charge kit.
  In respect of game controller does not appear even when you click advance to selected the device it does not always show upward.
  I tried to use it TI a game it does not at all.
  The rings on the Xbox 360 controller lights when I plug the controller in my pc (even though Device Manager detects a problem with)
  When I press the button the controller guide, it just keeps blinking as if it must be syc (but it connect through a wire that shouldn't happen)

  I tired using different drivers the same problems, I was installed the drivers off Windows 7 support site exactly the same problem...

  I also tried unplugging all the USB devices on my computer and plug the controller Xbox 360 on USB port which are directly mounted on the mother exactly the same problem.

  Up to now NO solution.
  Please help me because I think I got tired of everything I can

  Unfortunately, this won't work.  The Play and Charge kit connects only up to the actual battery.  Still, the controller connects more wireless.

  You would need a wired Xbox 360 controller or Xbox 360 Wireless Gaming receiver that connects to your wireless controller existing.

• Wired controller Xbox 360 connects to Windows 7, error: USB device not recognized

  Original title:-wired controller Xbox 360 connects to Windows 7

  Hey, I recently bought a controller wired xbox 360. And it does not connect to my PC. When I try to connect it says device not recognized USB. And in Device Manager it says it is an unknown device and that "Windows has stopped this device because it has reported problems. (Code 43) "I downloaded the driver from the software http://www.microsoft.com/hardware/en-us/downloads here and I also downloaded the MotioninJoy as an emulator, but the xbox 360 controller does not always connect." Is there a way to fix this?

  Hello

  1. did you of recent changes to the system before the show?

  2. do you have the receiver for the device to the XBOX?

  Method 1: Troubleshoot your XBOX controller.

  Follow the steps in troubleshooting from the link below and check if it helps.

  http://support.Microsoft.com/kb/908888

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/accessories/controllers-remotes

  Method 2:

  (a) click Start.

  (b) access Control Panel, click on System.

  (c) click on hardware, click Device Manager.

  (d) open Device Manager and expand the devices with error code 43.

  (e) right click on the device and Uninstall the device.

  (f) restart the computer.

  Check to see if that fixes the problem.

  If the problem persists, I suggest that you follow the XBOX support link below for assistance.

  http://support.Xbox.com/en-us/

  In addition, check out the link below and check if it helps.

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/hardware/error-codes

  It will be useful.

• Xbox 360 wired controller works only with Windows 8. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work.

  I have a controller wired xbox 360, not one of these pieces of plug. I put the USB controller and installed the device. However, it does not work. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work. I have not touched. When I search for a download for Windows 8 all get them are downloads for Windows 7 and below. It's a bit frustrating to not be able to use it. I would be very happy to help.

  Original title: windows 8 wired 360 controller

  I found the problem. I had the appropriate controller and installed the device correctly. This is the program that runs the unit that had either corrupt or missing files. I uninstalled the program and then installed from the Microsoft Download page. Now he works currently. Thanks for the support.

• Unable to get controller Xbox 360 on Run

  Basically, this does not work, and I don't know why. Here are the basics:

  With the rechargeable pack wireless controller

  Windows 8

  Dell Inspiron with 6 GB of RAM and dual core 2.5 GHZ

  Program that runs in Windows 7 compatibility mode

  The controller can be found in devices and printers as "Wireless controller for Xbox 360 with plug-and-play charge kit", but it is not detected by Micro Sofy Xbox 360 accessories. Circle button on the controller has 4 lights flashing instead of one as usual.

  I tried several controllers, and both have the same problem. On one, however, they illuminate the room and charges are red and the other green.

  I tried to reinstall the program.

  Any idea? Don't want to hit twenty clam down at least for a PC controller.

  Hello

  Check with afterglow and technical support Xbox and their forums.

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  With the help of the joystick Xbox 360 for Windows
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

  Set up your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

  Troubleshoot your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

  For most of the problems of Xbox:

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  Opening hours: 600 PM 2200 h / Pacific / daily

  International (direct line in the U.S.): 425-635-7180

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• gamepad Xbox 360 are not not in Device Manager

  Hello. I've been using a controller wired xbox 360 on my laptop with windows vista 32 bit 2 days ago. It worked fine, but then I was playing and all of a sudden it disconnected and my computer no longer recognizes. Sometimes it works after that I restarted my computer, sometimes it won't. I tried many things, as the driver download, remove it and install again in compatibility mode with Windows Service Pack 2, update driver chipset MB, etc. The strangest thing is that when I open the Device Manager, it is supposed to display something called Microsoft Common Controller or Xbox 360 controller, but it is not. It also does not appear when I run joy.cpl. The controller works, so it is not defective. I think it has something to do with the pilot. I'll appreciate any help I can get.

  Hello

  Follow the steps in troubleshooting mentioned in the articles below and check with the question.

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  How to connect your Xbox 360 wired controller to a computer running Windows

  http://support.Xbox.com/en-us/Xbox-Live/connecting/connect-wired-controller-to-computer-running-Windows-906347

  If after following the steps of troubleshooting mentioned in the articles above the problem persists. I recommend you contact the XBOX community. Please visit the links below to find a community and support that will provide the best support.

  http://support.Xbox.com/en-us/

  http://support.Xbox.com/en-us/contact-us?XR=footnav

  It could be useful!

• The video streaming HD always jerky and stops a lot on xbox 360 with new e3000

  I just got a new e3000 and when I stream HD videos on my xbox 360 its very restless and jerky unbearable to watch...

  I changed the mtu to 1400 and he did a lil better... I moved my router as close as I could for xbox360 and it got better, but still very agitated

  I have one of the new xbox 360 s so its N Wireless, even if I found hard path is not compatible with 5 GHz

  What else can I do to make my videos HD stream flawlessly? all other settings can I change?

  Thanks in advance

  Change the size of the MTU to 1365. Save the settings and the cycle of power to the router. See if that makes a difference.

  You can also try to change some advanced on the router settings wireless.

  Click on the Wireless tab and go wireless advanced settings. Change the tag to 75 interval, RTS threshold to 2307 and 2306 fragmentation threshold. Save the settings.

  Go to the Security tab and uncheck "filter anonymous Internet requests". Save the settings.

  Click the Administration tab and disable UPnP.

• Gamepad Xbox 360 plugged into USB with "Play and Charge Kit" does not work

  Hello, I have Windows 7 as OS, and I'm having some problems with my Xbox 360 controllers. When I bought the game and load to my xbox 360 controller kit, I heard that it was possible to connect to you pc to play with games for windows live. So, I started looking for drivers, and I found them in the official site of microsoft hardware. I installed it, and then I restarted my PC, I plugged it into the USB port, WIndows recognizes the material. I thought it was very good. But, even if the hadrware has been noted, it doest work. Then I discovered that 'Xbox 360 accessories 1.2' does ' t detects hardware, and it is not recognized as a game, but as a generic Hadrware material.  at this point I have gived up! I surfed the net, trying to find somethig or somemone can help me, but it was useless. Now, I hope that you will be able to solve my problem!

  PS: I already tried to change the controller, to change USB port, to change the cable, to uninstall and repeat the installation of the driver...

  I hope that I was clear and sorry for my bad English!

  Hello TheRick.

  Unfortunately, this won't work.  The Play and Charge kit connects only up to the actual battery.  Still, the controller connects more wireless.

  You would need a wired Xbox 360 controller or Xbox 360 Wireless Gaming receiver that connects to your wireless controller existing.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)