is not a valid value for parametric role
HelloI get following exception during execution of a piece of code
Exception: Instance ' / TestProcess1#Default-1.0/2/1' is not a valid value for parametric role 'customer '. has been launched on multiples in the /TestProcess1#Default-1.0/2/1 instance
The code as follows (Pl. Note: all the logMessage function properly):
role of role
logMessage "Hello Split started working: Desc:" + this.description
+ ' Status: ' + this.status
+ "Priority:" + this.priority
using gravity = SEVERE
Role = Role.findParametric (name: "Customer", the parameter: "North")
logMessage "role:"+ role.name.
using gravity = SEVERE
participants as a Participant [= role.participants]
for each usr in participants don't
' logMessage"Participants:" + usr.name
using gravity = SEVERE
copy = clone (this)
Copy.participant.Next = usr
end
Pl help
Kind regards
SDG
Hello
I think you probably thought about it now, but if you make the changes I put in bold in your logic below you should be ok:
role as Role
*// You need a "location" instance variable with the parametric value set before it reaches*
*// this Multiple activity*
logMessage "The location used for the parametric role will be:" + location using severity = DEBUGlogMessage "Hello Split Started to work: Desc :" + this.description
+ "Status :" + this.status
+ "Priority :" + this.priority using severity = DEBUGrole=Role.findParametric(name : "Customer", parameter : location)
logMessage "Role :"+role.name using severity = DEBUGparticipants as Participant[]=role.participants
for each usr in participants do
logMessage "Participant :" + usr.name using severity = DEBUGcopy = clone(this)
copy.location = location
copy.participant.next = usrend
Dan
Tags: Fusion Middleware
Similar Questions
-
Is there another way the valid values for arguments?
Hi, I need to know if, when you use a layout that dynamically changes the valid values of the argument can change the valid values?
There is an argumentValidValues(), but when I put:
Table = argumentValidValues()
nothing won't change, does anyone know if this is possible or is there another way to do it?
Thanks in advanceYou can refresh the valid values for an attribute (usually included in a list combo box drop-down list) in the presentation of the subject of a BPM if you call the logic:
Note that this logic must have double
quotation marks that surround the name of the attribute
refreshValidValues ("customerName")This means that the attribute (in this example customerName) has its valid values from a 'dynamic method' instead of a 'static' list
When the logic above is performed, the method associated with the attribute runs automatically and you should see your values in your dropdown menu dow to cool off.
Be sure to include the double quote characters in the logic. You have to type:
This logic will NOT work because it does not have double quotes
refreshValidValues (customerName)This is a common mistake and will cost you one day of scratching your head while you try to figure out what went wrong.
Hope this helps,
Dan -
LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW
Hello.
I used labview to make an assignment of the University. As part of the im supposed to transfer the .vi file to my teacher, but all .vi files sent using the e-mail system are corrupt. When I try to open mine it gives this error
LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW
Unfortunately, I also lost my backup as I was working on a lab computer and didn't upload my files on the storage server.
So I was wondering if someone can help out me. Thank you very much.
The problem is that the email system dealt with the file as a text file. All the
sequences have been replaced as . You can see this opening of VI in a hexeditor. Each VI begins with "RSRC". ". Your VI begins with "RSRC . I replaced the two occurrences of "RSRC"
with "RSRC". "and he opened in LV 8.6. Missing just a few controls and subVIs. I did this on Windows.
-
LRM-00121: "data_only;" is not an allowed value for 'content '.
Get the below error. Kindly help me
Microsoft Windows [Version 5.2.3790]
Copyright (C) 1985-2003 Microsoft Corp.C:\Documents and Settings\Tarun > cd\
C:\ >expdp directory = Data_pump_dir NTable dmp logfile = NTable.log = dumpfile modeluser/model123@model tables = NBANK, NBOI
content = data_only;
LRM-00121: "data_only;" is not an allowed value for 'content '.Hello
Remove the semicolon from the end of your command expdp:
expdp master/master123@MASDB Directory= _pump_dir dumpfile= NEFTTable2.dmp logfile= NEFTTable2.log tables= NT_BTIME content = data_only , N_BANK, NT_BO, NT_TYPE
It is the duplicate of https://community.oracle.com/thread/3522256.
-
I want to export data only. Here is my order export. But received error. Kindly give me the solution
expdp master/master123@MASDB Directory= _pump_dir dumpfile= NEFTTable2.dmp logfile= NEFTTable2.log tablesN_BANK, NT_BO, NT_TYPE, NT_BTIME = content = data_only;
Error:
LRM-00121: "data_only;" is not an allowed value for the 'content '.Hello
Remove the semicolon from the end of your command expdp:
expdp master/master123@MASDB Directory= _pump_dir dumpfile= NEFTTable2.dmp logfile= NEFTTable2.log tables= NT_BTIME content = data_only , N_BANK, NT_BO, NT_TYPE
-
Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I solve this problem? Thank you.
Hi JFO58,
I recommend you to run on your system cleaning tool:Download Adobe Reader and Acrobat tool - Adobe Labs
Later, try to install reader again by using the following link: Adobe Acrobat Reader DC install for all versions
Kind regards
Rahul -
'Java' is not a valid parameter for the language attribute
Got an exception on Weblogic 10.3 after deployment in the JSP as "the 'Java' is not a valid parameter for the language attribute.
I installed weblogic 10.3 and a deployed application.
"The JSP containing code such as < % @ page language ="Java"import =" is in error.
The error message looks like this
'Java' is not a valid parameter for the language attribute.
Please let me know if I need to include a few pots or change some settings.
Thanks and greetings
MaurySeems to be a syntax problem. Have you tried language = "java" instead of language = "Java"?
-
valid values for ToDo.PRIORITY
According to the API doc v4.5.0 and priority values of the field in a ToDo item:
"A value of 0 indicates the highest level of priority. A value of 1 indicates normal priority. A value of 2 indicates the priority level lower. »
But test with the pack of components 4.5 and its default Simulator, I have values:
HIGH = 1
NORMAL = 5
LOW = 9
Confused, I looked in the doc v 4.7.0 API and found this:
"... The priority is a value from zero to nine. Zero indicates an undefined priority, we specify the highest and nine priority the lowest priority. ..."
That would explain it, but can I be sure that 1-5-9 is valid for all versions of device software 4.5.0 and higher?
What would demonstrate application of the tasks of the BB if I create a task manually and take other priorities 1 through 9?
The documentation in the 4.5.0 and JavaDocs below is incorrect. This has been updated to version 4.6.0+.
Here's are a graphic on its operation.
PRIORITY specified setInt () /addInt)
PRIORITY returned by getInt() PRIORITY to the tasks Application 0, 4, 5, 6 5 Normal 1, 2, 3 1 High 7, 8, 9 9 Low -
Text field with AutoComplete do not store Item Value for Cascading LOV
Hello
I have created a form to the APEX 4.2, and two elements on the page have a problem. The first point is a text field with AutoComplete for the PROVIDER. The second element is a list select number that has the PROVIDER as part of waterfall to fill.
When a user selects one of the values that the field can be seized semiautomatic provider , the value autocomplété should make the selection list produce the numbers respective associated PROVIDER. The problem that I am running is that AutoComplete is not give PROVIDER selection list value is filled.
For example: if I type 'st' in the PROVIDER field that autocompletes to "steve" is selected, the NUMBER field must interrogate him for the numbers where VENDOR = steve. However, after reviewing the Session State from the PROVIDER element, the contained value is always only "st."
Here are the settings I have for the field PROVIDER : and NUMBER:
There should be a way to have the value of the seized field semi-automatic to account for what appears after selecting a value, but I don't know what it is. You can provide any help would be appreciated.
Thank you!
your query full auto would: select supplier_name | ' ('| supplier_id |') '
provider AutoComplete onChange, get the supplier_id and then value the selected drop-down list by using this code.
-
Not allowing a value for a selection in a Select list
Version 4.1.1.00.23
Hello
I created a Select list to display projects within a Department (that we call groups).
A group will have projects, however, more than one group may have a project with the same name.
If my application for the display of the list select the data in a hierarchical format like this:
Group 1
Proj Grp 1
Proj Grp 1
Proj Grp 1
Proj Grp 1
proj Grp 3
Group 2
Proj Grp 1
Proj Grp 1
Proj Grp 2
Proj Grp 2
Group 3
Proj Grp 1
Proj Grp 2
proj Grp 3
What I'm looking for, it's to NOT allow 'Group' level to be selected in the list. Only allow the level of project to be selected values.
The query is:
WITH t AS (SELECT 'Group: ' || vg.group_name name ,vg.group_id ,NULL id ,1 AS weight FROM vertical_group vg WHERE (vg.group_id = :P100_GROUP OR :P100_GROUP = 0) UNION ALL SELECT '....' || project_name ,group_id ,project_id ,2 AS weight FROM tbs_projects WHERE status IN ('Pipeline' ,'Planned - Partially Funded' ,'Planned' ,'Execution') AND ( :P100_RYG_PROJECT = 0 OR :P100_RYG_PROJECT = ryg_proj_id ) AND ( group_id = :P100_GROUP OR :P100_GROUP = 0 )) SELECT name ,id FROM t ORDER BY group_id ,weight ,name
Can someone help me with this?
Is there additional information that I can provide?
Thank you
Joe
HTML
optgroup
element is used for the structureselect
of the lists in this way. Select standard lists the APEX and LOVs do not have support for generatingoptgroup
of the items in the lists of options, but point of plug-ins with this feature are available.See the documentation for more information on the use of plug-ins.
-
Can not see the values for the value of the field Position Flex games
Hello
I want to see the values associated with the Position to flex fields segments set of values. The valueset is the section of Position Flex field of the HRMS.
When I go on request > FlexField > key > values and look for the defined value, it does not appear in the list of value games. I am unable to find a game for any segment of values. The two sets of value are at table in function.
Can someone tell me why I can't see them?
Abdul WahidBase table of values defined value, you can see until you go in application where this segment is used... you can still run the SQL derived from table according to value set where the conditions (if any) to see the values. I hope I understood your question
-
Location of the table "Data store path Selection" database and input valid value for the Round Robin
Long history, work paths peripheral to the equivalent of "Round Robin" (VMware) programmictally change as seen in vCenter - Volume Properties-> manage-> trace selection policy paths.
Struggling to get the value to change through scripts. Think that it requires the value as expected in the datamodel vcenter. Find it by inspecting the paintings have not yet
Thanks in advance
The values on the parameter - MultipathPolicy are: fixed, MostRecentlyUsed, RoundRobin, unknown
This changes all policies to roundrobin on a specific host
Get-VMHost
| Get-ScsiLun -LunType disk | Set-ScsiLun -MultipathPolicy "roundrobin" ____________
Blog: LucD notes
Twitter: lucd22
-
Apex. Submit in javascript do not set a value for the element
Hi all
I work with Application Express 4.1.1.00.23.
I am trying to use this
in order to assign a different value to P30_SELECTED_ROW_ID, and depending on demand, run the processes corresponding, but even if the beginning of the process correctly the value of the element sucks.apex.submit({request:parRequest,set:{'P30_SELECTED_ROW_ID':parID},showWait:true});
I also try to call the apex.submit using a javascript function to check the parameters passed and the value of Thierry is correct and NON NULL .
Thanks in advance for any help or suggestion.
AlexHello
article P1_SELECTED_ROW_ID is about to "view only".
If you replace this 'hidden' and unprotected, it should work.But because of the check constraint DEMO_CUST_CREDIT_LIMIT_MAX credit_limit<= 5000="" there="" will="" be="" an="" error="">=>
Good luck, Erik-jan
-
Valid values for the priority queue screen.
Where can I find the range of priorities in the documentation, and what constitutes a higher priority, more or fewer?
What is typical. that is, there are many functions as function calls push global screen requiring a priority value. I don't know what values to use.
Thank you
-Donald
I guess than Integer.MAX_VALUE
-
Hey, widget and other people, I'm working on a widget, but I get an error message whenever I try to select an option in a drop-down list of options, I created.
This is the setting in the mucow xml file:
(Tab is to facilitate troubleshooting; I normally follow each line.)
<list name="pagingOption" label="Pagination" defaultValue=""pagingType": "simple" ,"> <value name=""pagingType": "simple" ," label="Simple" toolTip="PREVIOUS and NEXT buttons only" /> <value name=""pagingType": "simple_numbers" ," label="Simple Numbers" toolTip="PREVIOUS and NEXT buttons, plus page numbers" /> <value name=""pagingType": "full" ," label="Full" toolTip="FIRST, PREVIOUS, NEXT and LAST buttons" /> <value name=""pagingType": "full_numbers" ," label="Full Numbers" toolTip="FIRST, PREVIOUS, NEXT and LAST buttons, plus page numbers." /> </list>
I converted the name attribute of each value HTML entities to better manage the necessary quotes. Depending on your selection in the list, the values above should run end as one of the following (including the EOL commas):
"pagingType": "simple" ,
or
"pagingType": "simple_numbers" ,
or
"pagingType": "full" ,
or
"pagingType": "full_numbers" ,
,
When I try to select one of the options, I get the following error:
then... help? What Miss me? :-/
I would like to remove the 'features of your option values. They can be confused Muse.
I would the value of these simple options, simple_numbers, complete and the full_numbers. Then change your HTML code to have something like:
"pagingType": "{param_pagingOption}".
Maybe you are looking for
-
In previous versions of Firefox, when I open a new empty tab by CTRL-T or by clicking on the 'more' button on the tab bar, Firefox would focus on the new tab. This is not the case with Firefox 11, but I liked this behavior and want to get it back. It
-
Have the ability to save cookies and all the other stuff already activated, I connect to several sites (e.g. gmail). When for some reason I restart the application, the site prompts me to fill again in my log in details. The strange thing is that on
-
Firefox 3.6 won't bookmarks
Over the last week, I tried to bookmark a page and it won't let me, so I tried a few other sites and still nothing. So I reinstalled Firefox and still nothing. I did it again today and it leaves my yahoo bookmark, but not any other site I tried to bo
-
Experience with the service coverage in Bulgaria
Hello I am one of the sysadmins of a large international company, which has offices in Sofia. Bulgaria.I would like to share my experience with the Toshiba products and service coverage in Bulgaria. Months ago, we bought an external USB hard drive -
-
Notification of comments network Disclaimer
Is there a third-party App I can use to present a warning to my guests with my network of comments? Some cafes offering free WiFi ask the customer please use the service responsibly and do not download anything that is illegal, and there is sometimes