is possible to configure the wan on Dell N3024 switch port

Similar Questions

• Is it possible to configure the same user for 500 systems that run under XP & Win7?

  Hello

  About 500 systems are run under Windows XP & Windows7, is it possible to use the same user for all 500 systems?

  Hi SupportRI,

  Windows Live family safety is no longer manages the accounts of children using Windows Live ID Windows Live ID on behalf of the child is essentially used for the feature of managing contacts (restrictions on the use of Hotmail and Messenger). Currently, parental control can manage Windows users; However, if you have already configured a Windows Live ID account before the update, it will be always available. You can see the thread below for more information.

  Where is the function of the safety Contact family management?

  If you intend to use Windows Live Family Safety for all users of 500 to restrict the Internet connection, please note that parental control does not restrict the Internet and Web sites. You also have the option in the list of content filtering Web to apply the rules to all users under the Family Safety.

  For more information on how you can install Windows Live Family Safety, please visit the link below.

  Protect your kids with parental controls

  Thank you!

• Advice on how best to configure the network adapters and virtual switch in ESX host

  I'm new to VMware and am its implementation.  I got my training a few weeks ago, and now I'm configing my hosts.  I have 3 guests, each have 2 network cards.  There is a virtual switch that ESX creates when it is installed (vSwtich0).  The books said that it is advisable to delete the VM network port of virtual machine that is assigned to the value group default virtual switch and put it on another virtual switch so that you keep your management network separated from the network of the vm for performance and security.  If I do this, all my virtual machines will have to go to 1 NIC b/c I only have 2 NICs per host.  I thought that I have just to keep all my groups of ports on the default vSwitch0 and add my second NETWORK adapter so that I can take advantage of the Association of NICs for redundancy and load balancing.  However, I'm not sure on the performance and the security risks.  Do you have any ideas or advice?  I could also create two virtual switches and put my virtual machines on one which would have a NETWORK card dedicated and put my service and Kernal VM console on another virtual switch with a dedicated network card.  However, in this scenario, I have no fault tolerance or load balancing.  We are a small shop and we have about 10-15 VMs on each host.  I don't have access to b/c distributed switching we paid only for the company (not more).  Thank you.

  Hi and welcome to the forums,

  With 10-15 VMs per box and I guess that I would seriously consider adding two extra cards for each host in the production machines. You could then do something like:

  vSwitch0 - vmnic0, vmnic2, vmnic3 - Console of Service, VM LAN network

  vSwitch1 - vmnic1 - VMkernel

  That would give you redundancy and performance to access your hosts (SC) and also for all your virtual machines. The VMkernel would get a NETWORK card dedicated for vMotion and could be on a separate network. He didn't need redundancy really as if the NIC sank the only issue is that you cannot vmotion virtual machines. In this case you would just move one of the NIC workgroup through to those switches manually.

  If you only have 2 network cards, then I would say having a vSwitch with two attached network adapters and VLAN the VMkernel may be off. I want absolutely to the redundancy of having two cards together.

  Hope this helps,

  Dan

• To the main unit Infrastructure Cisco switch port

  Hello.

  I had a doubt as to the Port of the Switch in my Cisco Switch for a camera of the first Infrastructure.

  This port must be a Switchport to access or a Switchport Trunk?

  What is your recommendation on this subject? What is best practice?

  Thank you very much.

  Access port should work fine. You do not configure a VLAN on the device itself, just the IP address / subnet and default gateway.

  Thank you

  Ric

• HP Officejet Pro 8600 no possibility to configure the Port

  My OS is Win 8.1 (last version), latest version of the printer driver, last wizard to install printers used.

  My first printer "HP Officejet Pro 8600" folling down on the issue of the screen. I'm doing a swap with the same model, I have to uninstall and reinstall the full with Wizard, now I have some difficulties to recognize the printer.

  -Shortly, no communication!

  -A few times, printing find after printer communication error.

  If I go to "Properties/Port/port" I got "Error Message.

  > An error occurred during port configuration.

  > The file name, directory name or volume label syntax is incorrect.

  Could be a former key stay in the registry (with the old link to the printer)

  I have to uninstall and reinstall the wizard fuul without success.

  Now the analysis feature does not run and printing run with delay.

  Major Remarq:

  I have no problem with MAC OS 9.x to 10.10.1

  Thank you very much in advance for your support

  Hello

  The port must not be changed that way but through the HP software, it is managed by the software and such a mistake is planned during the attempt to change the port...

  Try opening the HP Officejet Pro 8600 software, and then click the Utilities.

  Click Update IP address and type the IP address of the printer, which can be found by clicking on the icon wireless/network at the top of the Panel before you the printer.

  Click on save and confirm, then close and reropen the HP software,.

  What happens when you try to scan now?

  It'll work, or is there a specific error or behavior?

  As well try now the doctor of printing & scanning HP, it is listed under the Utilties batn so, follow the steps on the screen by selecting the difficulty of analysis and let me know the results if you are still having problems.

  Shlomi

• Is it possible to configure the "back" button to focus on Canon1DMk2 N?

  Having been using Canon 60 d and bought a used Canon 1 d Mk2N-have been used to BBF on 60 days - is it possible to put op on 1DMk2N somehow?

  ballymenaboy45 wrote:

  Having been using Canon 60 d and bought a used Canon 1 d Mk2N-have been used to BBF on 60 days - is it possible to put op on 1DMk2N somehow?

  Yes, you can. It is covered on Page 161 of the user manual.

  If you don't have a copy of the manual, it is available for download here.

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/cameras/support-DSLR/EOS-1d-mark-i...

• Is it possible to configure the computer to always expand the window open?

  I have Windows XP, and I wish that IE to always expand the window of IE when a window is opened.  If it is a new feature in IE9. It is not available for me because I don't have Vista or Windows7.  Any ideas?

  Three options.
   
  1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and this last one. Windows will remember the size used in the last window closed , the next time that you open the program.
   
  2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".
   
  3: IE New Window Maximizer
  http://www.MajorGeeks.com/IE_New_Window_Maximizer_d1746.html 

• Configure the link point to point switches VSS backup

  I have two basic switches in each office linking the two by point to point one desktop.

  Now I have the second point to point which I wan to serve as a backup.

  See fix main diagram point to point is set up in Vlan not as routed port...

  What is the best way to do this?

  If the two links are routed links then your config will work as his floating static so 20 advertising will be more preferred as its bottom, I would use sla monitoring and intellectual property to apply, so it is removed from the table right away and replaced with the backup route

• How to configure the VLAN for Cisco SG500 - switch 28

  Hello

  First of all, it's my first post here, I hope that someone can help me and please be patient because I am very little known.

  OK, so let me explain to you the scénarion I face and I hope someone can help me.

  We have a Cisco SG500 - 28 port gigabit switch in our workplace.

  Our goal is to create 3 VLANs and separate networks between the various departments.

  Vlan1 (which is the default VLAN in the switch)-will be used for the COMPUTER service and management.

  VLAN100 - will be used for business.

  VLAN200 - will be used for clients who need to connect to internet via WiFi.

  I created VLAN100 and VLAN200, and VLAN1 is there by default.

  I want to use port 13 for VLAN200 and to connect the-Wifi access point there.

  The uplink is in port 25.

  I would be happy if you could explain things first to a more general, abstract level, and then we can look at the specific scenario that we have.

  SG500 Cisco - 28 Gets a Sophos UTM 9 router internet.

  I need to take care of the inter - VLAN routing so, subnet and DHCP

  Thanks in advance,

  Sincere greetings,

  D

  Hi Desmond, looking at this DHCP pool it looks correct.

  For the second part, you waant VLAN 200 only work on VLAN 200, that's fine. So if you have an access point, and everything on the VLAN 200 connects to the access point, you can make an access to this list. The access list is entered only, which means the inbound interface.

  So if you have a gateway connecting to #1 port. You'll need to build the access list and apply it to port number 1. That's assuming you make a list of access 'decline' subnet source IP of VLAN 200 destined for the other subnet, that you do not want access.

  The image on another post to fill out your reference numbers, then for the ACL link, it should be placed on the interface VLAN 200 first comes to the switch (IE, the port the access point connects, make sure that you choose to bind by port instead of per VLAN)

  -Tom
  Please mark replied messages useful
  http://blogs.Cisco.com/smallbusiness/

• Configure the search box on My DataFinder with vbscript

  Hello

  I use the following vbscript script to load data into data tiara Portal:

  Define dataFinder = Navigator.ConnectDataFinder ("My DataFinder")
  Set queryForm = Navigator.CreateQuery (eAdvancedQuery)
  queryForm.ReturnType = eSearchFile
  Call queryForm.Conditions.Add (eSearchFile, 'name', '=', '*.tdm')
  dataFinder.Search (queryForm)
  Set dataFinderResults = dataFinder.Results
  Call Navigator.LoadData (dataFinderResults).

  This works great until My DataFinder of research area was previously set through the control panel of Navigator DIAdem.

  We leave the tiara of a Visual c# application and the above vbscript part a vbscript script that is spent in DIAdem when it is launched through the argument of /CScriptStart.  I would like to define dynamically the DataFinder My search box a path argument also happened in DIAdem.

  Is it possible to configure the search box on the My DataFinder with vbscript?

  In addition,

  Is it possible to have the tiara run in the background without going through the DIAdem screen flash when it starts first?

  Thanks a lot for any help

  Renette

  Renette salvation,

  From DIAdem 11.1, newly released last July, we now have an interface of VBScript to define the areas of research and other aspects of the DataFinder.  DIAdem 11.1 also has the ability to save a configuration file DataFinder and load, both interactively and programmatially.  Earlier versions of DIAdem had no affect by program areas of research.

  Note that defining the areas by programming research will result immediately in all files being indexed and ready to be questioned - which can take some time after you set the new areas of research, according to the number of files in each search box, you add.

  You start currently tiara with a BACK extension to run a VBScript script right after the launch.  The advantage of this approach is that Sophie persists as an independent application, even after the end of the calling application.

  You may also call one of the two servers ActiveX of the tiara, which would invisibly begin DIAdem and allow you to stay in touch with this instance of tiara and read the DIAdem variables and run more DIAdem orders or VBScript scripts.  The disadvantage of this approach is that if your calling program ends, so does the connection ActiveX, and stops the instance launched by this connection ActiveX DIAdem.

  Ask if you have any other questions,

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• How can I configure the WAG120N as a router only?

  How can I configure the WAG120N as a router only because I don't want to use it as a modem and router?

  I want to connect the WAG120N via a cable to a modem that will make the internet connection and only use the WAG120N like a wireless router.

  Thank you for your help.

  How to configure the WAN connection? Which requires your ISP?

  Shows the status page?

  You have a working internet connection with a public IP address if you connect your computer directly to the modem? It works with two different computers?

  If you have cable internet try to use the MAC address cloning feature and clone the MAC address of the computer that has an internet connection when it is connected directly to the modem.

• How to configure the options of oracle community such as, I see the answers to the questions posted by myself in a separate stream of data/place?

  Hello

  Thank you for your initiative on the oracle community.

  I love the community and wants to play an active role.

  However, I see the discussions initiated by me in a separate stream of data/place rather than mix them in all the other debates.

  is it possible to search all discussions posted by me only in one place?

  Is it possible to configure the options so that only the answers to my questions will be displayed in the Inbox?

  It used to work before, however, I subscribed to a few communities and my Inbox is bombarded with all the discussions. I read and try to answer on the other discussions, but it is difficult to keep track of discussion initiated by me?

  Help, please.

  Its there in your profile

  user10163762

• Configure the CDC on tables that don't have not primary key

  Hello
  
  On one of our client of majority of tables in their huge database meet no primary key. ODI-15021 is thrown when error logging is started. Is it possible to configure the CDC on these tables. Even we are not in a situation to create a logical primary key on the ODI level. Client request an oracle document which speaks of this restriction. Kindly help me. I went through the documentation thus metalink. I'm not able to find any information about him.
  
  
  Kind regards
  Shashi Ranjan

  Oh in that case, go to hotlog or Golden Gate... However, that is a task in itself and has its own benefits & cons.

  In addition, when starting the newspaper without the PK, the error message may be returned to prove that the CDC requires a key on the table in the model of ODI.

  I'll provide even if performance (due to triggers) is not a problem, then go ahead with the trigger according to CDC.

• Configure the network adapter speed / bandwidth management

  Hi all

  In VMware ESX 4, it is possible to configure the speed of vmnic with a speed of diferent? I can do 10, 100, 1000 or full / half-duplex (photos attached) but... is possible to configure the speed of 4 MB, 40 MB or something different?

  For bandwidth management, the best solution is the new Cisco device?

  Thank you very much.

  N ° negotiated between the physical NETWORK adapter and the physical switchport speed can be 10/100/1000. Just like in the physical world...

  But you can do some of the traffic shaping based on your configuration... On a vSwitch standard you can control the evacuation traffic. On a distributed vSwitch, you control evacuation AND penetration.

  / Rubeck

• Configure the Previous and Next buttons

  Is it possible to configure the buttons back and forward in the play by slide bar? I have seen that you can disable the PlayBar by blade, which would be another option, but I don't have a subscription service or ASA, so I do not have access to these features. I wish I could control what slides these buttons will make you.

  Hello

  It is not possible to configure the next/previous buttons on the PlayBar.

  However, you can disable the playback bar and put some action buttons PowerPoint which, once clicked will be the user to the desired slide.

  Thank you

  ALPI

  Adobe engineering team