is possible to use a report on battery AS07B41 PN on a new model?

Similar Questions

• Hello! I use photoshop elements 12 and I just set a new model. Using the pattern stamp tool, I'm brushing my boss on my photo; However, the model will be released in checkerboard and I don't want it to be checkered, on

  Hello! I use photoshop elements 12 and I just set a new model. Using the pattern stamp tool, I'm brushing my boss on my photo; However, the model will come out in checkerboard and I don't want be check patterns, only the template itself. I tried checking and unchecking the box alignment, but it doesn't seem to change anything. How to brush on the model without making a checkerboard pattern.

  Well, defined bosses are in fact repeat patterns, that is why your seeing what looks like multiple images of the same thing.

  This means that if you try to cover a larger area than the initial size of defined pattern, the pattern is repeated.

  What you could do is to make a selection of the area you want to fill the (flower) pattern with and go to layer > new fill layer > model

  Use a combination of the scale slider, then move the model on the image until your happy with the set up.

  (while the Model dialog box fill is open you can click on the area of document and move the model)

  front

  

  After

  

• Cliq: Is it possible to use a larger (mAh) battery side?

  Is a greater appreciation of battery (mAh) that we could put in the Cliq? As I understand it the Motorola Droid uses the same 1420 mAh battery makes the Cliq and the Droid fast & most armored has better battery life than the small Cliq. Perhaps with more mAh, we could get more use.

  I'm sure that the months are rolling, there will be extra batteries with a slightly larger note. But I suggest always against the use of alternative accessories (in particular the batteries) because they have not been properly tested by motorola to work well with your device.

• Is it possible to use Canadian spare battery in German for laptop - Y570?

  Hello community,

  I'm a trainee program at a University in canada. Naturally, I'm German.

  In Germany, I bought a Lenovo Ideapad Y570. I would buy a second battery for this camera.

  Is it possible to use a Canadian spare battery with this unit?

  -Because I don't want to buy in Germany and ship it to canada, I think that this is not common sense...

  Thanks for your replies.

  I don't think that lenovo made a laptop for the Germany and designed a notebook different to the Canada. I think you'd be very well just order a battery of the Canada.

• Is it possible to use the default value as sql expression in obiee 11g report?

  Hi all

  Is it possible to use the default value as sql expression in obiee 11g report?. Actually what I'm trying to make is that we send an ibot users. They want the same default values that are assigned in the command prompt in the report. So when we send the ibot it shows the report for default values assigned in the report criteria which is obsolute. As a solution, I kept the report in a dashboard page and send the dashboard like ibot page. But the problem here is that I can send only pdf format. Is it possible to do so at the level of the report (without using session variables). I want something like that

  Date between Date ' @{PV1} {Timestampadd (SQL_TSI_DAY,-90, CURRENT_DATE)} and Date ' @{PV2} {CURRENT_DATE}

  Thanks in advance

  Thank you

  AJ

  http://www.w3.org/2001/XMLSchema-instance"container ="http://www.w3.org/2001/XMLSchema"xmlVersion ="201201160' xmlns:sawx="com.siebel.analytics.web/expression/v1.1" > "

  "Question time '." Date '.

  "Question time '." Date '.

  BOX WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 1) THEN TIMESTAMPADD (SQL_TSI_DAY,-2, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 2) THEN TIMESTAMPADD (SQL_TSI_DAY,-3, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 3) THEN TIMESTAMPADD (SQL_TSI_DAY,-4, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 4) THEN TIMESTAMPADD (SQL_TSI_DAY-5 (, cast (max (CURRENT_DATE) date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 5) THEN TIMESTAMPADD (SQL_TSI_DAY,-6, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 6) THEN TIMESTAMPADD (SQL_TSI_DAY, 0, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 7) THEN TIMESTAMPADD (SQL_TSI_DAY-1, cast (max (CURRENT_DATE) date)) END

• is it possible to use a usb flash memory

  Hello

  I wonder, is it possible to use with the new bike g usb flash memory, as in compact z1 xperia:

  http://www.eBay.co.UK/ITM/micro-USB-host-cable-male-to-USB-female-OTG-adapter-for-Android-Tablet-Samsung-/221421517466?PT=UK_Computing_USB_Cables&hash=item338dc03a9a

  (I'm not sell)

  OTG is supported.

  Settings > storage > USB drive

  Please note that people have reported some cables OTG works better than others, so your mileage may vary.

  Mark

  Forums Manager

• Is it possible to use a Toshiba PC Bluetooth Stack as the helmet

  My environment:
  Windows XP SP2
  Toshiba Bluetooth adapter PA3642U
  Toshiba Bluetooth Stack: 5.10

  There is a thread with a similar issue dated 2006. ("Can I use computer as a phone headset?") The son said that it is not possible to use a PC (with Toshiba Bluetooth stack) as the headset for my mobile phone.

  Is this always true?

  If that's still true, I would like to know if it is possible to get this functionality using the Toshiba stack SDK? Is there an underlying technical problem that makes this difficult to do feature? I am a professional software developer and can, if necessary, make this change, but I'd rather find a solution without writing custom software.

  If Toshiba has added this feature can someone tell me how to configure my PC to make it work?

  Thanks in advance for your help.

  Hello

  This feature will come in the future with a new battery of Toshiba BT... but I don't have any calendar... Sorry

  SDK is possible please check this [link: http://aps2.toshiba-tro.de/bluetooth/?page=faq/sdk]

  I hope this will help you.

  CU

• Is it possible to use the internal clock for meter tasks in the buffer?

  Hello

  Hardware: USB term mass 6251

  Software: LabView 2011 SP1

  I need to measure the angular lever position and speed of a carpet. For that I use two quadrature encoders. To accurately calculate the speed I use buffered from the measures of position using one of the available onboard counters. I understand that for this technique, I provide a sample for the meter clock. I wonder if it is possible to use the internal time base. Note that both of my counters are used so I can't generate a signal to clock with them.

  I found two conflicting pages related to my problem:

  1) http://digital.ni.com/public.nsf/allkb/EA7FFFEAFC3E1D85862572F700699530

  2) http://digital.ni.com/public.nsf/allkb/775290A3121D1FFC862577140074D3B3

  The first says that I can use the internal clock of 100 kHz, and the other says that I have an external clock.

  Comments/solutions?

  Javad

  Hi Javad,

  On your specific device, there is not a direct route from the time base of 100 kHz for the meter (according to the routing table of MAX):

  

  Yellow cell indicates that a route is possible but there is not direct (the "gate" terminal is used as sample clock for counters of the M series).  Mouse on the cell reveals yellow that make this route really requires the use of a counter (so it is not suitable for your application).

  On the line above "100kHzTimebase" you will notice it is called 'FrequencyOutput', which does not have a direct route to the door.  This would be the way to go if you want to route 100 kHz (or some other frequency) as your sample counter clock - you can set it up the same way to a standard meter output task:

  

  The output frequency doesn't have that many features like a meter output, but it is able to generate a continuous stable frequency.  There are only 32 different frequencies that can be generated using Freq Out on the 6251:

  {10 MHz, 100 kHz} / {01:16}

  Do not forget that the resolution of your measure of frequency by using this method will be equal to how many times you update the measure (hopefully, that makes sense).  In other words, if at the end of all the 1 second, you take the total number of charges since the last second, you would have a 1 per second equal resolution change in the number.  If you take the difference twice per second, you would end up with half the resolution.  You will be sampling the account register fairly quickly, but you will need only to do the calculation of the frequency after that all N samples in order to obtain a significant number.

  Another method that will certainly give a higher resolution in less time at typical speeds of coders is to set up a measurement of the frequency (the counter will count the internal 80 MHz base time period your external signal and the pilot calculates the frequency based on the result).  This method uses only a single entry - so you can just feed the 'A' your encoder quadrature signal (the method will not work if you are interested in absolute position or direction).  Without using signals A and B together, you will be susceptible to noise (which is common to have a quadrature encoder) that you want to delete (perhaps by setting up a digital filter).  Finally, you want to set a reasonable timeout on your reader calls (which will be blocked until a period of your external signal occurs), and the error-200284 handle simply report "0Hz" to make sure that your program is still sensitive even without an external signal present.

  Best regards

• OBIEE 11G - how to find automatically physical table using a report

  Hi all

  Is it possible to take a catalog of reports and retrieve the complete list of database tables that use these reports. Suppose I have a
  great list of reports may be 200 or more and I need to know what are the tables of these reports (analysis) are dependent on. Clearly, I could open an andextract the XML definition but I want to automate this process

  Best regards

  Benoit

  The XML definition does not have the physical database table - it doesn't even SQL logic.

  SQL logic is generated when executing of referral Services, which sends it to the BI server, which then decides what physical tables, it will hit. Even in this case, according to things like global navigation your report even likely face different DB tables depending on the State of the hierarchical columns etc.

  SampleApp includes some features that may be interesting for you - take a look at the dashboard page 10.21 physics of the Clause and see details on 10.11 (physical SQL Generator / physics of the Analyzer of the Clause).

• Export EN without using Financial Reporting Studio

  Hello.
  
  Is it possible to get the designed reports to the Financial Reporting Studio for import into another machine?
  I ask this because I am not able to access this machine more. So, do you have another machine, but now, with a new database, with no report =)
  
  Thank you.
  
  See you soon,.
  Rafael brands

  I know that there is a report migration tool as we used it when we went to 7.2.5 9.3.1. I'm not 100% if you can make use of it as a tool for simple 'copy' (i.e. copy even software version reports from one server to another or if it only works in specific upgrade capability); However, I would like to start on this track first.

  I think that the roadblock that will hit you. However, is that I think that the environment should be operational for this utility work.

  If this is the case, the manual way is ugly. As I mentioned in a post unfounded, reports (since the system 9) are scattered in different rooms. In the database of the workspace, you will find information that links a UUID (Unique identifier) to a "friendly name". In the file system of your server that is running the web application of RM, you will find the actual report files. Files / folders for reports are not favorable to humans; Therefore, you must the DB to resolve names. The other question, you have here is the connection of database for reports. When you create a database connection, it also gets a generated Unique ID value that is stored in the reports. If the ID does not exist in the target system, you must update all reports; If not, will not work correctly.

  If I HAD to do by hand (i.e. old workspace is not operational, so I can't export), here's what I'd do...

  -CAUTION - I don't think that someone here will approve this method and I don't really either, but...

  "Old system" to the "new system".
  -----------------------------
  #1-nouveau system--> create your database or connections, preferably with the same name (s) as previous environment

  #2-old--> Locate naming the information in the workspace database tables (if you don't know where it is, find a previous post, I put on the reports and the database where I explain this)

  #3-vieux--> locate physical files / directories (see previous post on the subject)

  #4-old--> is at least ONE report for EACH database connection used in the old system. Open the file in Notepad and search for the connection ID. (NOTE: files are compressed so get something like 7zip inside)

  #5-nouveau--> open the workspace database search the database connection information. For each connection that you created, update the ID matches the ID in the reports.

  At this point, we have two different options...

  Option 1 - create your own archive export
  ---------------------------
  Now that you know where are all the old reports and you know the appropriate designation of the reports, you can make your own archive export which you can then import into the new environment. The structure of archive 7zip would be something like this

  ReportExtract.7z
  (null) File--> that would correspond to the folder your workspace root
  My report Folder 1--> your stuff to the workspace here
  My report folder 2--> etc.

  The thing of import to recognize here is that when you open the 7z file, you must have this file NULL; otherwise, it does not. I know not how to create such a null record, so what I do is usually to create a file extracted using workspace to export, then use 7zip to alter the archive to include what I really want...

  #1-vieux--> the names of Fix. Using the information from the database of the workspace write a quick script to browse the folder / folder structure and rename all the files and folders so that they have the friendly name.

  #2-old--> for files that were renamed just decompress. This can be accomplished with a script file as well bat.

  #3-nouveau--> go to file export and choose the highest folder you can and export all items. Save the file somewhere convenient that you will have need of ot that immediately.

  #4-old--> open archive with 7zip. You see a folder without a name, double-click it. Now you should see the beginning of the structure of your report (if you have one on the new environment...)

  #5-vieille--> using windows Explorer, drag and DROP the files/folders of measures #1 / #2 in the window 7zip. 7zip then adds these folders/files to archive report, we have created.

  #6 new--> connect to the workspace and select the file, the import option. Continue to use archive created previously. If everything is done correctly, the reports will shoot and you'll be good to go at this point. (OTHER THAN THE SECURITY)

  Option 2 - manually entered database and copy the files/folders
  ---------------------------

  In theory, it is slightly faster, I have never tried so I will say not for the fact that it works. I'd probably recommend only try it is the old and new machines running the SAME version of the software AND the new machine added nothing to this yet...

  #1-search for RM1 service folder and copy all files/folders RM folder on the new server

  #2-locate the old tables of database associated with report of files, folders, permissions, data connections and copy data in database tables.

• Is it possible to use a Script in action? -It doesn't seem to work...

  Is it possible to use a Script in action? -It doesn't seem to work...

  I use the script "around any corner" of SATO Hiroyuki..., and I want to apply to only one anchor (on multiple boxes)
  

  An Action can call a script in the file > Scripts menu through the point of Menu Add Action step. But it works only for the duration of your Illustrator work session. IF you exit and then restart, the add step Menu item will be empty. This bug has been reported for the COMPLETE FOUR VERSIONS of this botched program.

  However, if I understand your description of what you're trying to automate an Action won't able to automate the selection of a particular anchorpoint several paths. You will need to perform the selections at the beginning. If the script would then apply as you wish to each path depends on the way in which the script is written.

  JET

• Enter / view comments using financial reports.

  Hi gurus,
  
  Is it possible to have comments written using financial reports.
  
  Example:
  
  I've created a report of EN for budgeting. I would like to have the provision to users to enter their comments. the comment could be another grid or another section in the report.
  
  It's something like the annotations in Hyperion planning. Unfortunately, we do not use Hyperion planning retrieve annotations to FR.
  
  Or entered to have bypasses commentory is welcome.
  
  See you soon,.
  Satya.

  Hi Satya,

  There is a new feature in v11, which allows you to add annotations / comments to a report of financial information. It seems to be similar to the function of the cells in essbase text, but if you're on this version it's merit to be studied to see what can be achieved.

  If you are using a version earlier than that, i.e. v9.3.x or below so I'm not aware of any way to directly comment on reports financial, though if you use Hyperion Planning we can extract details supporting or Annotations in EN reports. There are two other options available to you:

  1 of the sample, Web analysis reports does what you do, he has a table that contains a grid report and another panel that contains the comments that can be added to the / changed by users.

  2. you could get out the report in MS Word using SmartView EN

  Hope this helps
  Stuart Game
  www.Analitica.co.uk

• It is possible to use iBot to produce and deliver all dashboard?

  Hi, I have a dashboard with lots of reports. Customer wishes to obtain this dashboard by e-mail. It is possible to use iBot to produce and deliver all dashboard? Or y at - it another way to do it? Thank you.

  Dear Vlada

  Use the tab content delivery to specify the type of content you want to deliver with the iBot, such as a dashboard page or an application registered.

  You can also specify the format of delivery for content, such as HTML, PDF, XLS, CSV, or text.

  Follow the steps of the "Oracle® Business Intelligence answers, book and interactive dashboards User Guide."

  Kind regards
  Amrita

• Is it possible to use Microsoft Money on a mac laptop?

  I think of buying my first mac laptop.

  Is it possible to use Microsoft Money on the mac?

  Install Windows on your Apple computer then any program that runs on Windows. Windows can be installed using Boot Camp Assistant or using a machine virtual Parallels, Fusion, or VirtualBox.

• Is there a way to the target url by using the power of Attorney (I want to say is possible to use the proxy to target a site something like that.)?

  Is there a way to the target url by using the power of Attorney (I want to say is possible to use the proxy to target a site something like that.)?

  By default, you can not in Firefox.

  But you can use an add-on like FoxyProxy Standard, I think he understands the functionality you need.