is still no solutions that help with windows vista updates!

Similar Questions

• Lost all the games that come with windows Vista.

  Original title: IE windows games: hearts, spider and others

  I lost all the games that came with windows vista and would like to know how to get them back is to say: hearts, spider, scanning of the spirit and others

  Hi JosephAdams,

  Did you the latest changes on the system?

  I suggest that you turn off the games feature in windows vista and re activate and check if it works.

  a. click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. to turn a Windows feature, select the check box next to the set. To turn a Windows feature off, clear the check box.

  c. click OK.

  First you can disable the function of games using the method above restart the computer and turn on the games feature and check if it works.

  For more information, you can consult the following articles and see if it helps.

  Turn on or off Windows features

  Where are my games?

  Hope this information is useful.

• Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

  original title: problems with Windows VISTA update

  I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

  1. 9 47 code
  2. Code 800070002
  3. Code D 80024200.

  Is there a resolution to do the same thing?

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Help with Windows Vista black screen

  I have a Windows Vista SP1 64 bit with 8 GB of RAM and 2 3850's Radeon ATi CrossFireX. in any case, I have a program called mechanical system, you've all probably heard before, this is an excellent program to clean your hard disk and defragment your memory. However, I ran last night and said the program automatically restarts the computer when it ended, after that he finished and I rebooted was greeted with the atrocious Black Screen of Death with a cursor, if it is not blinking and I can move it freely, but there is nothing I can do with it given the background task bar is non-existent and the entire screen is black.

  I tried some of the solutions, I can not even the CTRL + ALT + DELETE to get into task manager and manually start explorer.exe; Help me please. The only type of response I can get from the system is to obtain the keys to stick to pop up when I hit the SHIFT key five times. I am very confused. I don't have external hard drives hooked up to it and there is no thumb-drive connected via USB either. I'm completely puzzled here. Please help me.

  Hello

  System Mechanic, by Iolo is one of the best of this type of program, he's trying to at least
  be legitimate, however it is still a Registry Cleaner and system optimizer that leaves a
  much to be desired in terms of compatibility. These programs are more likely to ask questions
  While fixing anything. Most are like snake oil. So my advice would be to uninstall. If you insist
  use make sure you have done a current Restore Point before using it and keep current backups
  on the primary drive.

  -----------------------------------------------------------------------------------------------------------------------------------------

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  ===================================================================

  Sometimes it works:

  There are backups in the folder C:\Windows\System32\Config\Regback.

  Here is an article for XP and Vista is similar in scope. The config folder and its content should
  be rebuilt.

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Check this thread - you can use the command to a startup or recovery disk prompt.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• forgotten user password to connect to the computer that works with Windows Vista Home

  version Windows vista home my daughter composed of a password that she can't remember now, we can't access the computer.  How to enter and reset this password without factory default and lose all the images and files?

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• I would like to help with windows vista please

  I am eager to take advantage of my old computer to windows vista. I found and removed some viruses ran spybot search and destory, ccleaner. I have these programs on my windows laptop 10 (different from the laptop in question), but also my desktop computer running windows 10. I increased the performance of the laptop, but Im stuck with the problem that windows vista is not updated. When was the last update of windows vista? I've finally updated in May.

  Try the following: Install KB3168965 and KB3185911 manually. Download links:

  http://Wu.krelay.de/en/

  The value "never search for updates' automatic updates and reboot before installation manual.

  Best regards, VZ

• Help with Windows Vista SP1 download

  Hello

  I am a user of Windows Vista Home Basic Edition. My machine is running on 32-bit architecture. I want to upgrade to SP2, but it says that I should install SP1 before SP2. I downloaded a file on the microsoft site, but it gives an error message. Please give me the link to download Vista SP1 32-bit and also tell me what are the updates available for Windows Vista.

  Error code: 0 x 80070002. See http://go.microsoft.com/fwlink/?LinkId=101139 for more details.

  Thank you

  Ankit chikh

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Need help with windows 10 update

  I don't have this icon on my desktop so I can not to update or windows 10 reserve

  need help with this, I want to experience windows 10!

  I need a quick answer, I tried to find a way to book and I can't do anything

  

  Try this tool to upgrade your system: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install

• Need help with Windows Vista's "Patience" (64)...

  Hello
  First time here.
  I'm a fan of Patience, and since I have very good results with it, I was wondering;
  is it possible to copy the save queue it?
  In this way, I have a backup, and from time to time I replace a ghost image, rather than tedious maintenance tasks.
  If I replace an image, the current backup file is overwritten, and I have to start all over again.
  Then I would be Grateful someone I could tell my where I can find the current save Patience from Windows Vista?
  It should look like this "Solitair. Solitair Save-ms, "(without the quotes) and I can not find ' m.
  Yet my score is constantly updated, so where to keep Windows file backup...?

  Best regards Carlo
  Don't look at the time where you are facing...

  Hey, it's possible the backup file is a file.  You do a right click on the game to Games Explorer and select replays in the menu, or you can make your way to \Saved games. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Fax help with Windows Vista Ultimate Edition, please?

  How can I specify when I want a sent fax?
  Thank you
  Lance Barschak

  Hello

  See if this information from Microsoft helps you.

  "Send a fax".

  http://Windows.Microsoft.com/en-us/Windows-Vista/send-a-fax

  "Fax: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/faxing-frequently-asked-questions

  See you soon.

• Problems with Windows Vista update error code I get is Code: 80096001

  Hi gang,.

  I need help I can get at this point. I am currently working on a machine to a customer who had the rootkit zero.access top. The machine works like a champ, now that it is all clean; but for some reason any Windows Vista refuses to update. Let me mention the operating system before proceeding. The operating system is Windows Vista Home Premium 64-bit. When I try to run Windows Update, the machine has a total of seven updates to install; This is especially important and option. In the important section, the machine is trying to install a security update and that is 9. In the optional section, the machine is trying to install the driver as updates: video, network, etc. The PC is already running Service Pack2. The error code I get is: 80096001. I tried every fix that Microsoft recommends, even the Microsoft Fix It tool. Nothing seems to work. I had a simular problem before in Windows XP. If my memory is good, I had to go to the entry in the registry of Windows Update and apply a DWORD here, or something; I don't remember exactly what I did. I can tell you that I checked the registry and there is literally no key to change in Windows Update. Any help or advice would be great, this question is about to drive me crazy.

  Thank you

  What's next for security/antivirus installed; is it's subscription and current definitions; has whatever it is detected the last time that the system has been scanned with it?

  You can reset the Windows Update components, but If the malware is present on the system update will still be blocked by the malware.

  (When was the last time you checked your system for malicious programs?)

  Suggest you try to have the system scanned both of the following in this order - do not jump...

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  (MBAM) Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html >

  How to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

  ESET Online Scanner

  http://www.eset.EU/ESET-online-scanner>

  Access the article KB971058 via Internet Explorer (only)

  If no malware is present - How to reset components Windows Updates?

  http://support.Microsoft.com/kb/971058>

  Download and Save the fix it 50202 from the page above.

  Close all the open browsers and programs prior to execution of the fix it.

  Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 19:30 on Friday, October 7, 2011

• Error 80070663 with Windows Vista update

  I'm doing the update of windows on my Windows Vista computer and I get the same error code 80070663

  * Title *.
  I'm doing the update of windows on my Windows Vista computer and I get the same error cod 80070663

  Heather,
  This is an article dealing with questions with this error code: KB913754

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• need help with windows vista

  I need help, 1 there is an error code 10 on Teredo Tunneling Pseudo-Interface, it indicates that the driver is unable to start. I click on find the solutions button but nothing happens. When I click on the button to update the driver it says it is already up to date. It cannot roll back the driver while he was working properly.

  2nd, Windows Firewall cannot be turned there an error 0x6D9 code and it tells me still the firewall of windows with Security Advanced snap-in failed to load. It allows me to change anything.

  3rd my computer cannot access the internet, it says it cannot detect a connection even if it is connected directly to the modem, in addition, a message indicates the dependency service or group was able to start.

  When I run a diagnostic and repair the check it tells me that the DHCP is not running on my computer. I unplugged my modem and plugged back there and still no Internet. This is a result of the issue of Teredo Tunneling pseudo-interface or it is a separate issue

  Hello

  Question: Error code 10 on Teredo Tunneling pseudo-interface.

  Teredo is a tunneling protocol designed independent platform to provide IPv6 (Internet Protocol version 6) connectivity to nodes that are in IPv4 networks. Compared to other similar protocols its particularity is that it is able to fulfil its function even behind network address translation (NAT) devices.

  The Code 10 error code is generated when the Device Manager does not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Check the steps from the link below and see if the error code 10 disappears.

  http://support.Microsoft.com/kb/943104

  Question: Error 0x6D9 when it turns on the Windows Firewall

  Run the Fixit from the link below and see if Windows Firewall can be started or not.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic

  Question: Cannot access the Internet

  What browser do you use to access the Internet?

  Perform the steps from the link below and see if you can access the Internet.

  http://support.Microsoft.com/kb/937151

  Answer please if you have any questions.

• I installed a driver for my printer Hp Officejet Pro L7380. How to connect the printer to the computer that works with windows vista?

  I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?

  Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine.  It has only a single computer attached, or is it a printer networked with other computers?

  If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.

  Have a look here.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190

  It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner.  Windows Fax and Scan can be able to do.  When you go in such programs are there options scan and they see your scanner?  If this is not the case, try the full download.

  If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).

  For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.

• Can I download photos sent to me by a person on a CD from my computer that works with windows Vista

  Someone sent me photos to my computer and I want to download on a CD so that I can bring to a drugsstore and print.

  My operating system is Vista. How can I do this? Thanks for your help.

  You do not actually have put them on a CD. If you use a self-service terminal, you will find it as convenient to put them on a USB key.