Is the secondary node of data direct mandatory or optional?

Similar Questions

• ISE 1.1 error displaying the home page when looking on the secondary node

  Hello

  I made an ISE installation with a primary and a secondary node - basically, it works very well.

  My problem is when looking on the secondary node e I get a certificate error which pointing to this page looking for the browser gets information from the primary node that makes the browser do not to display info. On the primary, it works fine.

  First I used self-sign certificates, subsequently I installed certificates frm the local certification authority - the problem remained the same.

  I tried with IE, Firefox and Chrome.

  When you change the primary/secondary role, the problem always moved to the real secondary node.

  Anyone an idea what to do here?

  Andreas

  If you use self CERT signed, you must connect to the node seconeary, once you trust cert, you'll be able to see everything on the head node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• AddNode cmd failed for the secondary node: internal error of AAM - agent could not start. : unknown error HA

  I'm testing paths to upgrade to vSphere ESX 3.5 update 4 on an IBM BladeCenter with 2 hs21 xm Server blades; I am going through several problems, and the last is the one mentioned in the subject of this thread.

  In this scenario, I've upgraded successfully vCenter then I took all the virtual machines on a single host esx 3.5, I removed the other host in the cluster, and then vcenter, then I did a new install of vSphere, I reconnected it the host to the cluster then I did all the procedure with the second node. In the end, I have two installed vSphere hosts but I had to disable my cluster HA always been, I get this error when I try to configure HA agents on the hosts, but I must say that the DRS ok works.

  In the release notes for vSphere, in the section known issues, I can read:

  "Upgrade of an ESX/ESXi 3.x host an ESX/ESXi 4.0 host results in a successful upgrade, but VMware HA reconfiguration may fail.

  When using vCenter Update Manager 4.0 to upgrade an ESX/ESXi 3.x ESX/ESXi 4.0 host, if the host part of an AP or DRS cluster, the update succeeds and the host is reconnected to vCenter Server, but HA reconfiguration may fail. The following error message in the summary of the host tab: HA agent has an error: cmd addnode failed for the main node: internal error of AAM - agent could not be started. : HA unknown error.

  Solution: manually reconfigure HA by right-clicking on the host and select Reconfigure for VMware HA. »

  The problem is that of workaround does not work for me, so I was wondering if someone, is once again able to help me with this problem.

  Thanks in advance for your support.

  Hi Caddo,

  I had the same problem with one of my hosts.  It was resolved after disabling HA on the cluster and enabling again.

  Mirko

• VCHB 6.4 cannot authenticate the AD to secondary node

  Basically, I inherited a VHCB 6.4 environment.  What I see are a primary and secondary server both with the

  same name (we'll call it SERVER001p - not real name ).  In the config VCHB I see them as Non-identical.

  The two are set to use SERVER001 as the name used to connect to vCenter, and their computer name are both

  SERVER001P.   This seems odd to me - that must have a different computer name.

  It doesn't matter when I go to failover to the secondary server, it works - to a point.   I can get to vCenter

  by the client using the IP address.  But when I go to connect, I have to use a local administrator account to get in.

  It seems to me that something funky with the domain membership happened on the secondary node due

  by the way, they both have the same computer name.  I thought about removing the field school,

  and rename and closer again in the field.   But I'm afraid that the law of the suppression of secondary education

  the domain may cause a problem with the primary because they both have the same name.

  There an insight or tips on the best way to solve this problem without impact on the environment?

  
  Thank you!

  You can provide the credentials and the server will be removed from the domain (from the point of view of server). You don't need connectivity of field to remove a server from the domain.

• ISE 1.1.3.124 secondary node not accessible after registration

  G ' Day all,

  I am constantly given the State of synchronization and replication for my secondary admin/Monitor node in the head node as a node unreachable. The secondary has always think it is offline. When I run the tool diag ISE connectivity tests, that I can ping successfully the devices together using both hostname and ip and the nslookup works also very well between the two nodes. Ping and nslookups also work different networks within the environment. The two nodes are in the same vlan on a pair of vss 6500, but on different switches of the pair. I am new to ISE, so any help is greatly appreciated.

  Thank you all.

  JS

  Sent by Cisco Support technique iPhone App

  Hi James,

  Node added to distrubited deployment but Sync never ends.

  Normally, this means that the TCP 1521 port is blocked between the nodes or the internal database user password was not set to the same value between the primary and the secondary. (I know you have already completed this step)  The user database can be reset on the CLI with the following command: reset-passwd ise internal-database - application user.

  Change the internal database user password restart the ISE services.

  Additionally, make sure that the secondary node is accessible on the following ports in both directions:

  -TCP 443 (SSL/SOAP)

  TCP - 1521 (database listener)

  -ICMP (Heartbeat)

  Jatin kone
  -Does the rate of useful messages-

• Remove the XML node

  Dear adobe experts,

  I have a requirement to remove a node in the XML interface of a form of adobe (not only by removing a subform in the form). It must be a deletion, an empty node does not work (I read this in another post).

  The XML structure looks like this:

  < ITEM >

  < DATA >

  < ROW_IID > 0 < / ROW_IID >

  < PARENT > 0 < / PARENT >

  < CHILD > 0 < / CHILD >

  < / DATA >

  < DATA >

  < ROW_IID > 1 < / ROW_IID >

  < PARENT > 0 < / PARENT >

  < CHILD > 0 < / CHILD >

  < / DATA >

  < / ITEM >

  I want to, for example, to remove the second node of data including the underlying elements: row_iid, parent & child. Already tried: xfa.record.nodes.remove (oRemoveNode); I got it from http://partners.adobe.com/public/developer/en/xml/Adobe_XML_Form_Object_Model_Reference.pd f and several messages in this forum, but I get the following message appears in the error console: remove failed. I know that the somexpression is correct.

  Here's the code I used to try to remove the node.

  var node_loc;

  var del_node;

  [node_loc = ' xfa.record.ELEMENT.DATA [1 '];

  del_node = xfa.resolveNode (node_loc);

  xfa.record.Nodes.Remove (del_node);

  Anyone know what I am doing wrong?

  Kind regards

  Niels

  Hi Steve,.

  I fixed it myself. I adjusted my code a little, so the node, including the elements is successfully deleted.

  Here is the way that I fixed it:

  var node_loc;

  var del_node;

  [node_loc = ' xfa.record.ELEMENT.DATA [1 '];

  del_node = xfa.resolveNode (node_loc);

  xfa.record.ELEMENT.nodes.remove (del_node);

  Thanks for the help!

  Kind regards

  Niels

• Secondary ISE cannot join the head node with error message

  Hello

  I just installed the secondary ISE and made the following points, but when I try to reach the head node, I received the cannot authenticate the primary ISE, please check the server or the certificate and try again.

  -promote the secondary image of autonomous primary

  -export the seconary cert self

  -import the cert in primary school

  -try to add not on the used secondary IP and host with super admin user name

  I noticed one thing that instruction on the ISE 1.1.1 import cert on mentioned primary section:

  1. Choose Administration > system > certificates.
  2. In operations of certificate on the left navigation pane, click certificate authority certificates.

  but there is no certificate authority certificates in the left pane. I chose to store the certificates instead

  

  any suggestions?

  Hello

  Did you put the primary secondary node? You tried to save the node in the wrong direction. To register with the primary node of a node, the application for registration must be initiated from the primary node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Move data directly from inside the loop

  Is it possible to move data directly from inside a loop outside the structure of matter in real time? I would like a chart of the data in a structure of matter in real time outside the structure of the case. Ideally, it would include information of the real deal and then the waiting period as a '0' for false case. Attached is a version simplified VI I'm working. I tried the local variables, but they only read the first item for loop puts each cycle T/F. One idea is welcome including a complete change in the structure of the VI.

  Thank you!

  
  

• Get dDocName of the secondary data file

  Hello

  I am able to get the dDocName of the data file contributor assigned to the main page using SS_DATAFILE. Is there a similar way to get the dDocName of the data contributor is assigned to the secondary page file?

  If I visit the secondary page, I can see exist as part of the property "dataFile" of the object of JavaScript of the placeholder. However, when I print at this point, I don't get what I'm looking for.

  Thank you!

  Josh

  In fact, there is nothing wrong with the help of SS_DATAFILE. I had incorrectly configured section in the site hierarchy

• When I receive an email from the form of BC, I wanted to deliver my CRM data directly.

  Hi all

  When I receive an email from the form of BC, I wanted to deliver my CRM data directly.

  I need to create an action to push the information in a link like this:

  " action = ' https://ws.Compa.com/comp-bin/Titan/web/contact.pl "

  any idea? Thanks a lot for your help.

  Vincent

  When you create your web form you must include the fields by the tabs of contact and the data will be automatically added to the CRM

  If you have additional forms attached to the used CRM CRM form tab

  

• Primavera P6 API - start and end dates of the activity in the secondary reference scenario

  How to seek early and dates of activity in the secondary database or tertiary reference end? There are areas of activities and methods provided in planning extraction and primary base line project (active class getBaseline1StartDate(), getBaseline1FinishDate) but can't find any secondary data or tertiary basis even if we show them in details the activity in the Primavera. I use Primavera integration API version 8.2.

  Use the BaselineProjectHelper class to get a list of all the base lines for a given project.  Go through the list looking for basic lines you are interested in.

  Once you have basic interest projects, pull a list of ongoing project activities.

  Browse the list of activities tearing you start and end dates.

  Call the method on each of you loadBaselineActivity of reference projects for the departure of the referenced activity and end dates.

  For performance, seek assistance loadBaselineActivities to reduce database queries.

  V/r,

  Gene

• Send data directly to the printer.

  This? to have been invited before, sorry I did not found in multiple searches.

  Is it possible to send a fusion of data directly to a printer?

  I have a postcard merged data of variable images on the front and address info. on the back for 20,000 records.

  Create merged document or pdf export will produce a document of 40,000 pages if he actually succeeds.

  Is this possible?  Any help is very appreciated!

  PS I'm on CS5

  Nope. It is the operation of merge data. It's primitive, but it's free. A real solution in the printstream is certainly a possibility for many commercial printers, but these modules are not cheap.

• Tree node in data recovery for the 1st node only for the 3 data blocks?

  Hello alllll
  
  I have 3 BLOCKS of DATA master / detail-detail; GL_TYPES - < GL_ACCOUNTS - < GL_COMPANIES
  
  The Rel attribute between 1 and 2 is
  

  GL_ACCOUNTS. TYPE_ID = GL_TYPES. TYPE_ID

  is between 2 & 3 ADR
  

  GL_COMPANIES. ACCOUNT_ID = GL_ACCOUNTS. Account_id

  I have also a Tree is recovering the data in blocks of data, the following code, used in the trigger WHEN-TREE-NŒUD-SELECTED and it works fine, but not for all nodes;
  the selected node displays the data for the first node only. Assets to say but if I chose to any other node it returns no data?
  
  you could any boady pls explain to me why what is happening?
  
  The following code is:
  -----------------------------

  DECLARE
                      
          htree ITEM;
          NODE_VALUE VARCHAR2(100);
  
   BEGIN
  
   IF :SYSTEM.TRIGGER_NODE_SELECTED = 'TRUE' THEN  
        
  -- Find the tree itself.
  
   htree := FIND_ITEM ('BL_TREE.IT_TREE');
   
  
    NODE_VALUE := FTREE.GET_TREE_NODE_PROPERTY( htree, :SYSTEM.TRIGGER_NODE ,  Ftree.NODE_VALUE );
    
  
    GO_BLOCK ('GL_ACCOUNTS'); 
      
     set_block_property('GL_ACCOUNTS', DEFAULT_WHERE, 'GL_ACCOUNTS.ACCOUNT_ID = '  || 
     ftree.get_tree_node_property('BL_TREE.IT_TREE', :SYSTEM.TRIGGER_NODE, FTREE.NODE_VALUE));
  
   EXECUTE_QUERY;
   
   END IF;
        
   END;
  
  
   

  Kind regards
  
  Abdetu...

  I would say there is nothing in relation to tree now. Because the tree is to give the appropriate value for the setting of the block where clause. Check the relationship and that the cursor goes to the block expected where the data must be retrieved. Like you said tree account id that the tree is from the correct values.

  -Clément

• Error SSL using the neutrons API and CLI directly on controller nodes

  VIO vSphere 6.0 + 1.0 + NSX

  I am trying to execute the following code segment:

  credentials of 139 = get_credentials()

  Neutron 140 = customer. Customer ('2.0',

  141 username = credentials ['username'],

  142 = credentials ["password"] password,

  143 auth_url = credentials ["auth_url'],

  144 tenant_name = ['tenant_name'] credentials,

  145 endpoint_url = credentials ['url'],

  146 = ['token'] credentials token,

  147 insecurity = True)

  response of 148 = neutron.list_ports)

  When I run the Python script, it error the following:

  Traceback (most recent call changed):

  File "getMACAddr.py", line 148, < module >

  response = neutron.list_ports)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 111, in with_params

  RET = self.function (instance, * args, * kwargs)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 306, in list_ports

  * _params)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1250, in the list

  for r in self._pagination (collection, path, * params):

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1263, in _pagination

  RES = self.get (path, params = params)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1236, in get

  headers = headers, params = params)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1221, in retry_request

  headers = headers, params = params)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1156, in do_request

  RESP, replybody = self.httpclient.do_request (action, method, body = body)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/client.py", line 192, in do_request

  * kwargs)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/client.py", line 148, in _cs_request

  throw exceptions. SslCertificateValidationError (reason = e)

  neutronclient.common.exceptions.SslCertificateValidationError: SSL certificate validation failed: [Errno-1] _ssl.c:510: error: 140770 CF: protocol SSL routines: SSL23_GET_SERVER_HELLO:unknown

  The /var/log/neutron/server.log file has the following corresponding entry for when the script tries to establish the connection:

  2015-04-11 07:17:31.941 2096 INFO neutron.wsgi [---] (2096) accepted ('10.27.16.164', 34495)

  When I run the CLI from the same controller node, I get the error with or without the - indicator of insecurity:

  ports of neutron root@controller02:/tmp#-Liste

  SSL certificate validation failed: [Errno-1] _ssl.c:510: error: 140770 CF: protocol SSL routines: SSL23_GET_SERVER_HELLO:unknown

  root@controller02:/tmp# neutron - insecure port-list

  SSL certificate validation failed: [Errno-1] _ssl.c:510: error: 140770 CF: protocol SSL routines: SSL23_GET_SERVER_HELLO:unknown

  If I run my Macbook Pro local neutrons CLI command, it works fine. This leads me to believe that it is a communication error when the controller node tries to talk to himself. I tried setting the OS_AUTH_URL and the OS_URL both the localhost IP address and address IP 10 - network - both result in the same error.

  Any ideas?

  --

  Chris

  It seems that the SSL error was caused because I connect to the OS_URL for neutrons on SSL - which is what access security page of the & showed that the correct URL in the Horizon. By changing the OS_URL to use the HTTP protocol, it began to work.

• graph of waveform of filling via the property node

  Hello

  I want to fill a graphic waveform spirit multiple waveforms by programming. This means, the graph is the main VI, and use it in an another vi reference chart. Firstly I have to solve the correct reference waveform curve, then I use the "Value" property node The value must be the value of type variant, should be no problem. But the property node works only with table 1 d and not 2D.

  How can I fill it with table 2D programmatically? I use LabView 8.6, see attached example.

  Mitulatbati

  Hi mitulabati,

  You must specify the data type that you will be feeding to your chart, the default type is an array of 1 D.

  To do this, connect an empty 2D array directly on the graph, it will change the input to your waveform parameters and now the property node will accept this new data type.

  Hope this helps