Is their a limit number of recipients in a single message
I sent an email using a list of addresses of slightly more than 50 e-mail addresses and the recipients of the "too many" message appeared. However, the message in the sent items and I have no way of knowing if he was released to all recipients, shor tof asking them all individually. Does anyone know how to fix this?
most e-mail providers impose a limit, their choice of what they think is "for many". Your mail will be gone to anyone.
Tags: Thunderbird
Similar Questions
-
limit the maximum number of recipients
We have an exchange Server 2007 and we have a few problems of spam I want to know what is the best practice to limit the number of recipients per mail massage and how?
Hello mohammedTayyar,
This isn't the kind of question that is generally answered in the Windows answers Forum. Since you're using an Exchange 2007 server, I recommend to post in Technet under Exchange Server - secure messaging Forum.
Here is a link to their Forum.
http://social.technet.Microsoft.com/forums/en-us/exchangesvrsecuremessaging/threadsSincerely,
Marilyn
-
Problem burst EN books - a large number of recipients don't email...
Financial information - 11.1.2.2.203
Workspace - 11.1.2.2.300
Linux Redhat - 5.8
I'm running a problem then the breakup of the books that when I use a large number of recipients that they are unable to send, in fact the scheduled task ends but fails to update the display in the workspace or to send an error, but the books are created correctly and can be seen in the structure of folders.
If I use a smaller set of recipients, let's say less than 20 they email correctly and everything seems to go as planned.
Y at - it a type of configuration file that should be adjusted to allow larger lots to be run?
I'm really at a loss here and have already connected an SR, I was hoping that someone in the community has fallen on this before.
Thank you.
Adam,
It is a false problem that has been addressed in the FR. 11.12.2.2.305 PSU. default 16312930 #.
-
Hi, y Cirrus limit the number of connections from a single IP address?
Single IP I connection much and found that there are a few not very stable , automatically disconnect.
is Cirrus limit the number of connections from a single IP address? Thank you
No, there is no limit to the number of connections that can come from an IP address.
-
How to remove the wrong number of contact to appear in Messages
Don't know where to post this.
Seems that when I go to messages and type a name for a person to text, it evokes their old phone imessage prime number... and not their number today (that) actually in my address book. I know in Mail, you can click and "forget address" or something like that, but doesn't seem to be in nature for Messages.
Well thanks for the help!
Aaron
To resolve this issue, try disabling iMessage (settings > Messages), then restart your phone (by pressing the power button), tap Settings > phone > my number and confirm that it is correct. If this is not correct, please enter the correct number), then turn iMessage on (settings > Messages) and go to settings > Messages > Send and Receive and see if the correct number is displayed under "start new conversations of:
-
Can you help me? I can't open my Jpeg images in Windows Live Photo gallery. I get this error message;
C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?
I use Vista Home premium 32-bit.Cheers, Rob.Hi robgrimes
As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20
I hope this helps.
-
Is BlackBerry a limit of the body of the PIN message?
Hello
Please suggest...
Is BlackBerry a limit of the body of the pin message? for example message has the character of up to 160 limit...
It is limited by the size... 32K or 64K function OS if I remember correctly.
-
I have received my serial number and downloaded but got this message "the signing of this file is invalid or damaged. What can I do?
redownload the file.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
There is a limit to collect pictures in a single event?
Hello
I wonder if there is some kind of limit, to collect pictures in a single event. I'm not sure, but from what I could understand, cannot be together in the same event, photos up to six days of difference in time.
For example, I have pictures of my dog taken for more than a year and want to put them in the same event, but without changing the dates on photos. I had to create at least 6 events with the name of my dog, because the option of recent event disappears from one event to another.
Is it possible to do what I want? If not, why? It's something fundamental to organize the photos...
Thank you!
You are right that if the images are flat 6 days they cannot be part of the same event. Revel process events in a "time box" way and expects that they are more or less continuous. Things like holidays, or parts with the start and end dates.
You could try to make an album. For example if you do an album of all your dog photos, you can add images from any dates because the albums have no limitation date.
Hope this helps
Jason
-
The simple aggregate data of a certain number of lines into a single line on 10g xe
Hi all, is it solution for 10g xe how to aggregate the data of a certain number of rows in a single line.
Basic data:
DEPTNO ENAME
---------- ----------
20 SMITH
ALLEN 30
WARD 30
20 JONES
30 MARTIN
30 BLAKE
10 CLARK
SCOTT 20
10 KING
30 TURNER
20 ADAMS
30 JAMES
20 FORD
10 MILLER
need to update table B with this release
DEPTNO EMPLOYEES
---------- --------------------------------------------------
10 CLARK, KING, MILLER
20 SMITH, FORD, ADAMS, SCOTT, JONES
30-ALLEN, BLAKE, MARTIN TURNER, JAMES, WARD
concerning
GordanHello
The deliimter (the 2nd argument) in SYS_CONNECT_BY_PATH should never appear in the elements be concatenated (the 1st argument). Use a different delimiter; It can be more than 1 character, if you wish.
For example:SELECT deptno , LTRIM ( SYS_CONNECT_BY_PATH (ename, '`') , '`' ) AS employees FROM ( SELECT deptno , ename , ROW_NUMBER () OVER ( PARTITION BY deptno ORDER BY ename ) AS curr FROM emp ) WHERE CONNECT_BY_ISLEAF = 1 START WITH curr = 1 CONNECT BY curr = PRIOR curr + 1 AND deptno = PRIOR deptno ;
Furthermore, the code you posted was the way to Oracle 9 use SYS_CONNECT_BY_PATH. In Oracle 10, it is simpler and more effective to use CONNECT_BY_ISLEAF, as shown above.
If you really want to use a delimiter that appears in the data, then you can use some other characters in SYS_CONNECT_BY_PATH and then use REPLACE on the results, like this:
SELECT deptno , REPLACE ( LTRIM ( SYS_CONNECT_BY_PATH (ename, '`') , '`' ) , '`' , ',' ) AS employees FROM ...
Of course, if you do this, you will not be able to tell if "CLARK, KING, MILLER" is 1, 2 (e.g., 'CLARK' and 'KING, MILLER') or 3 elements.
-
The hard drive is 1 TB partitioned into two equal partitions, drive C and drive E. Drive E has no data on the subject. Is there a limit to the number of partitions that can be applied using the Windows 7 installation.
The game, April 1, 2010 10:57:33 + 0000, Orchestrion wrote:
> The hard drive is 1 TB partitioned into two equal partitions, drive C and drive E. Drive E has no data on the subject. Is there a limit to the number of partitions that can be applied using the Windows 7 installation.
Yes. The limit is four.
However, you can also have a more logical drives, and once they are
created, their use is exactly like using a partition.The terminology is confusing, but from a practical point of view, you can
have 'partitions' as much as you want, up to the letter z:--
Ken Blake
Please reply to the newsgroup
Ken Blake -
Assigning images to the grid according to their value random number cells?
Hi all!
I need a good point (or push) in a good way.
Background
(With previous assistance from this forum), I created a random number of 12 x 9 grid that scrolls the numbers 1 to 9, a total of twelve times each. Then I created a button that mixes the current grid cells whenever it locks. I now want to use 9 images that I imported as individual symbols in the library (I gave them each their own class called "skin1," 'skin 2',...) "skin9") as the cell labels or equivalent. I also created images as individual video clips (using the.) The class Sprite as extended but base class keeping the real image of class names in line with the name of the object, i.e. the "skin1" image is the class "skin1.as").
Question
How can I assign these images for the cells in the grid according to their respective values (from 1 to 9) and ask them to fill the grid, whenever I click on the button 'shuffle'? Thus, for example, in my grid numbers 1 to 9 randomly appear 12 times each. Whenever the number 4 appears in a cell, I want it to be assigned to the picture "4 GB" (which is just a chart that looks like a button and has a fancy number '4' printed top). Here's a piece of code that I use to draw the grid cells with:
// Creates a grid cell when called by generateGrid(). private funciton drawCell(_numeral:int):Sprite { /* This is the code I am currently implementing to populate the grids with (although I don't want to use text labels as I want to fill each grid with an image according to its numerical value (1 to 9). */ var _label:TextField = new TextField(); _label.multiline = _label.wordWrap = false; _label.autoSize = "center"; _label.text = String(_numeral); // Add numerical label to cell array. cellLabels.push(_label); var _s:Sprite = new Sprite(); _s.graphics.lineStyle(2, 0x019000); _s.graphics.drawRect(30, 0, cellW, CellH); _s.addChild(_label); return _s; }
While what follows is not the labour code, it will show if all goes well I want to reach inside this function so I can't use the code snippet above to the text labels:This will create "if all goes well" a table of 9 images by calling their classes. var _imageArray:Array = [skin1, skin2, skin3, 4 GB, skin5, skin6, skin7, skin8, skin9]; That's what I want to get for each cell using the matrix in the image above: for (i = 0; I < cells; i ++) {if (_numeral == 1) {/ / Insert image skin1 for each instance of #1 in the grid.}} } If (_numeral == 2) {/ / Insert image skin 2 for each instance of #2 in the grid.} }... If (_numeral == 9) {/ / Insert image skin9 for each instance of #9 in the grid.} } }
Again, I want not to use text labels. I have a skin graph custom that I want to go over each number on the grid, based on its value (from 1 to 9). Help with this is greatly appreciated!
:
// Creates a grid cell when called by generateGrid(). private funciton drawCell(_numeral:int):Sprite { /* This is the code I am currently implementing to populate the grids with (although I don't want to use text labels as I want to fill each grid with an image according to its numerical value (1 to 9). */ var _label:TextField = new TextField(); _label.multiline = _label.wordWrap = false; _label.autoSize = "center"; _label.text = String(_numeral); // Add numerical label to cell array. cellLabels.push(_label); var _s:Sprite = new Sprite(); _s.graphics.lineStyle(2, 0x019000); _s.graphics.drawRect(30, 0, cellW, CellH); _s.addChild(_label); var classRef:Class=Class(getDefinitionByName("skin"+numeral));var image:*=new classRef();_s.addChild(image); return _s; }
-
identify by their physical port number com ports programmatically
I have a system with an NI PXI-8420/16 card. From time to time a small problem in my PXI system occurs such as my RS-232 physical ports are assigned to different COM port numbers So, I have to go to MAX and reassign my alias to realign my LabVIEW application with my port hardware. Is there a way to stop these seeds from happenning? OR is it possible to identify by program number of a physical port com?
See if this helps: http://forums.ni.com/ni/board/message?board.id=170&message.id=490257#M490257
-
Adobe indicates that their own serial number is a fake. Surely a mistake
Tried to download Premiere Elements by using the serial number recovery system.
Got an automated message to say that the serial number is incorrect and false!
Thought I can have mistyped the number and re-tried only for the same thing to happen.
Surely, there must be a mistake. How can I fix the problem?
Find the serial number of your Adobe product quickly
Error "serial number is not valid for this product". Creative Suite
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html
-
Can I add a limit number of letters using a tag?
For example, {tag_caption, 125}. The 125 would be the limit, you can type in the caption text box.
Hello
Excellent suggestion but unfortunately not possible to create parameters. Only the tags that has a setting of limitation of character will work.
For a current list of our tags + available parameters, see the article below.
- http://kb.worldsecuresystems.com/134/bc_1342.html
Kind regards
-Sidney
Maybe you are looking for
-
My 6 month Apple Watch stopped charging and will not restart.
My 6 month Apple Watch stopped charging and will not restart.
-
How to find the DAQ Assistant in LabVIEW student 2009 Edition
I got 1 Core and Core 2 in LabVIEW 2009 prices in June. When I went to use the student edition I have LabVIEW 2009, I couldn't find the DAQ Assistant. This will present a problem when I come to use it in class this fall. It works fine on my version 8
-
What is the best Forum on Windows address book
I'm looking for answers to change the address book windows, the maximum size of the fields and how I might be able to import all or part of my address book Palm OS in the Windows address book. What is my best forum for this information please? Abrada
-
8600 all-in-One installation to replace 6500 all-in-One
Should I uninstall before installing the replacement printer 8600 6500?
-
want to upgrade, but don't have an active windows
I want to upgrade my pc windows 7 to windows 10 but this upgrade requires an active... windows is windows is not activated, what do I do?