Problem burst EN books - a large number of recipients don't email...

Similar Questions

• Possible to set up buffer - delay in the implementation of large number of buffers - IMAQ trigger problem

  Hi all

  I thought that I could transfer it here because it might be a more appropriate forum. I have a bit of time pressure, so I hope someone can help me. I'm having a problem with a program that I wrote to acquire and store images from a camera to linear scan.

  My camera (SUI Goodrich, 1024 pixels) is connected to a card framegrabber (PCIe-1427), which is connected via a RTSI cable to a PCI-6731 card attached to a SCC-68 (series) connector M.  My goal is to drive a mirror galvanometer scanning and acquire images from the camera continuously on each scan. As the galvo scan will be the frame of an image (1024 pixels x 1024 lines).

  I managed to do it (I think), as my direct purchase program works exactly as I expected. However, when I try to save the images, I noticed that for a larger number of images, the starting point of the image is shifted the same amount for each image. I'm not really sure what's going on, it seems to me that there is a delay in the use of the VI "IMAQ set up buffer" when a larger number of buffers is used, (or even 100). Is it possible that my hardware trigger does not wait for all buffers to be configured before you start to run?

  I would really appreciate any idea or ideas that anyone could have on this issue.

  Sincere greetings,

  Gill

  I fixed the problem by doing that I don't use actually 1000 stamps to save 1000 frames. Program works if the number of buffers is lowered.

• Problem loading of a large number of csv files

  Hi all

  I have a problem loading of a large number of csv files in my LabVIEW program. I have attached a png image of the code simplified for only loading sequence.

  What I want to do is load the data of 5000 laser beam profiles, so 5000 files csv (68 x 68 elements), and then proceed to an analysis of data. However, the program will only ever 2117 files, and I get no error message. I also, tried at the beginning of loading a single file, selecting an area of cultures - say 30 x 30 items - and then to load the rest of the files cropped to these dimensions, but I always get only 2117 files.

  Any thoughts would be appreciated,

  Kevin

  
  

• Reserve a large number of UK

  Hello

  I'm trying to implement a large number of UK for my business, but UK wide option is not available and I don't want to choose a wrong number of geographic, which does not reflect where is my business in the United Kingdom.

  I read that you need to snap up these figures when they become available which is pretty fair, but other that the verification of the list of all the 5 minutes is there a way I can book one of these numbers with Skype?

  Thank you.

  magicshoes wrote:

  
  

  other verification of the list every 5 minutes is there a way I can book one of these numbers with Skype?

  Hello and welcome to the Skype community.

  I am not afraid.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Connect the large number of parameters and variables between Verstand and model of Labview

  We have an installer of dyno with a chassis PXI-E running Veristand 2014 and 2014, inertia. In order to strengthen the capabilities and timing of the Veristand, I would use models of Labview to perform tasks is not possible by Veristand and inertia. An example of this is to determine the maximum amount of a large number of thermocouples. VeriStand has a comparison function, but it compares two values at once. This makes long and rigid emissions. LabVIEW, on the other hand, has a function which words one to get the maximum items in a table in one step. I need to use Labview to 'send' the thermocouples of 50 or more to the Labview model. In addition to the variables that must be communicated between Veristand and Labview, I also need to present Labview with the threshold and setting parameters. Forums and user manuaIs understand that you must use the connector pane in Labview Veristand System Explorer mapping to expose the inports and isolated villages. The problem is that the part of Labview connector is limited to 27 I/O. How to overcome this limitation?

  BTW. I'm relatively new to Labview and Versitand.

  Thank you.

  Richard

  You can work around this limitation by putting your orders and clusters indicators. Then set the cluster to be required or recommended to indicate whether contained controls are entered or parameters, just normal.

  

• IMAQ configure buffer - delay in the implementation of large number of buffers

  Hi all

  I don't know which forum I should post this in, but I hope that someone who can help me see this. I'm having a problem with a program that I wrote to acquire and store images from a camera to linear scan.

  My camera (SUI Goodrich, 1024 pixels) is connected to a card framegrabber (PCIe-1427), which is connected via a RTSI cable to a PCI-6731 card attached to a SCC-68 (series) connector M.  My goal is to drive a mirror galvanometer scanning and acquire images from the camera continuously on each scan. As the galvo scan will be the frame of an image (1024 pixels x 1024 lines).

  I managed to do it (I think), as my direct purchase program works exactly as I expected. However, when I try to save the images, I noticed that for a larger number of images, the starting point of the image is shifted the same amount for each image. I'm not really sure what's going on, it seems to me that there is a delay in the use of the VI "IMAQ set up buffer" when a large number of buffers is used.

  I would really appreciate any idea or ideas that anyone could have on this issue.

  Sincere greetings,

  Gill

  I fixed the problem by doing that I don't use actually 1000 stamps to save 1000 frames. Program works if the number of buffers is lowered.

• BSOD after copying the large number of files from one disk to another

  Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
  -Gigabyte Z97X Gaming 7 mobo
  -8 GB Corsair vengeance 1866 mhz
  -EVGA GTX 770 video
  -CPU Intel 4770K
  -two hard drives of 1 TB WD black in RAID 1
  -one ADATA 256 Gb SSD as drive OS
  -a 1 TB drive Toshiba
  -Windows 7 64-bit professional
  -F3 Bios Rev

  System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.

  I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 25/06/2014 19:55:50
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Daddys-PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      32358
     
     
      System
      Daddys-PC
     
   
   
      0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
      C:\Windows\MEMORY. DMP
      062514-6692-01
   
  

  No problem, thank you!

  All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8008788138
  Article @ fffffa80087882c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Internal unclassified (Proc 4 row 1)
  Status: 0xbf80000000200401
  Address: 0x00000000fee00040
  Misc.       : 0 x 0000000000000086

  Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.

  -----------------------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.

  4.

  2: kd > lmvm marvinbus64
  start end module name
  fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
  Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
  Image name: MarvinBus64.sys
  Timestamp: Fri Sep 23 17:17:03 2005

  Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).

  5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.

  -----------------------------------------

  If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• Modern slow mail app or crashes if you have a large number of files

  I have a large amount of mail and upgraded to the new mail app, when I open the mail or switch folders that the app gets real slow. How can I fix?

  After the update to your e-mail to 318 version application, you may have noticed that when you open mail or change records/account app slows down or crashes. This happens if you have a large number of files, usually around 200 to 300.

  Note: to find out what version you have:

  1. open the Mail application.

  2. drag the right edge of the screen, or move your mouse to the upper right.

  3. Select settings and click on to words. (The version number appears.)

  Workaround

  The only way to avoid this problem is to reduce the number of files.

  Once you reduce the number of records to a more acceptable level, the Mail app will work normally.

  More information

  Windows Mail: Setting up an account of end-to-end

  Solve problems with Windows Mail

• CC of Dreamweaver on iMac very slow to open sites with a large number of files

  In recent weeks, a site I've worked regularly for several years began to take 10-15 minutes to open. A pop up says it checks the files, but the button that should allow you to escape this process does not work. The site has about 120 000 files located in different folders, and this was never a problem in the past. To access the site, the only way is to wait until the course ends and the spinning ball to go. I read the thread on the port of Skype settings, but I think that this may be a different problem because even though I have installed Skype I rarely running and only one of my sites is affected.

  Any ideas?

  With a large number of files, it would be a good idea to disable the cache of Dreamweaver for this site.

  1. Site > Manage Sites.
  2. Select the site, then click on the pencil icon to change site settings.
  3. Select Advanced settings > local news in the list on the left of the Site Setup dialog box.
  4. Uncheck the Enable Cache.
  5. Save > fact.

  Another possibility is that your Dreamweaver cache is corrupted (probably with as many files). See remove a corrupt cache file.

• I was trying to import a large number of files on 10 Organizer.  10 Organizer now hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  mercad611 wrote:

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  If the problem is related to a corrupted catalog, try to open the organizer with a new empty catalog.

  Hold down the SHIFT key at the launch of the Organizer. You get a dialog box with the choice to start with a new catalog, or start with a different catalog and even to 'fix' the current catalog. If your organizer starts with an empty catalog, use the option 'fix' on your corrupt catalog.

• vmtoolsd.exe uses a large number of discussions

  Hi all

  We use VMware tools a few years now on our Windows 2012R2 environment.

  But the last months we receive complains that some of our users of remote office that our servers are slow, memory is full, and users cannot sign outgoing/incoming.

  After investigating this matter, we see that VMtoolsd.exe uses a lot of memory.

  And it takes a lot of time to kill the process.

  In the resource monitor, we discovered that the process uses a lot of discussion (sometimes 80,000). After killing the process, threads are down slowly to zero. After that the server responding normal.

  On the internet I can't find someone who has this problem.

  We have a large number of servers. This question is only a few of them.

  We use ESXi 5.0 and VMtools 8.6.11 build-1310128

  

  Anyone know what is happening?

  Wow, it looks like you are using the tools provided with ESXi 5.0 Update 3 October 2013.  There has been several fixes for ESXi 5.0 update 3.  The latest patch for ESXi 5.0 features new tools (8.6.15 build-2495133).

  See here: http://packages.vmware.com/tools/esx/5.0latest/index.html

• a large number of horizontal lines of gray on the screen

  After a few warnning on corruption of opera setup.exe, I defegramented my C drive.   After a few minutes, a large number of horizontal lines of gray introduced through my screen. Now, I hardly see office and standby option is disabled. reinstalling the video driver and the system restore has not solved the problem.

  Thank you

  Hello

  to exclude a hardware failure...

  Is the line greyed @ startup lenovo bios message? or in windows only?

  is that line greyed light plugged external VGA LCD or TV? This is to exclude internal cable problem S10e LCD/LCD...

  try to boot a linux live cd (or key) for example http://www.linuxmint.com/edition.php?id=67 & Installer http://unetbootin.sourceforge.net/ to prepare the installer to use the stick on another computer...

  If the failure occurs while linux is in live mode (Nothing installed on the hard drive), it is the case of bad...

  failure is not in linux... .your windows installation is defective, the re - install

  cordially KalvinKlein

• I want to delete a large number of messages in Thunderbird. How can I do this withot through each message individually

  I want to delete a large number of messages in Thunderbird. How can I do it without going through each message individually.

  Have you ever deleted multiple files in both Solution Explorer?
  Thunderbird works the same way.

  Select the first message you want to delete. Press on and hold down SHIFT and select the last message should be deleted. This selects all messages between the first and the last of them.
  The Ctrl key and click on a message, you can select or deselect them individually.
  Then press DELETE to remove all the selected messages.

• Why FF made contact a large number of sites at startup

  When I use a sniffer by looking at my network traffic, I noticed that when I start FF, a large number of sites appear. I am watching the network traffic with Wireshark. Under the statistics section, endpoints increase considerably when I started FF.

  Philipp said

  Hello, please see How to stop Firefox to make automatic connections

  Turns out to be persistent to the sites that I visit.

• Large number of files in the directory profile with at sign in name

  Hello
  I noticed that my wife s v35 Firefox running Windows 8.1 32-bit has a large number of files such as:

  cert8@2014-03-25T19;02;18.DB
  Content-prefs@2014-01-30T21;28;58.SQLite
  Cookies@2014-01-08T18;12;29.SQLite
  HealthReport@2015-01-20T06;44;46.sqlite
  Permissions@2015-01-19T10;26;30.SQLite
  webappsstore@2015-01-20T06;44;48.SQLite

  Some files are entirely new.
  The original files get backed up somehow, but I can't figure out how. My PC does not contain such files.

  Thank you

  I'm sorry, this has nothing to do with Firefox. I was watching the backup directory created by Memeo autobackup. The original profile directory is OK.
  Sorry once again.