Is there a function like desktop access remotely raspberry pi?

Similar Questions

• Our computer was accessed remotely this afternoon, how can we prevent this?

  We have a Mac Mini, with OS X 10.6.8 using NetZero DSL as our internet provider and Firefox as your browser. Our computer was accessed remotely through LogMeIn (rescue), but it seems that the person or the group failed to hack into our computer. Are there settings in Firefox that could prevent this from happening in the future? Thank you...

  Firefox is a web browser not a firewall.

  I agree that it's more to do with your operating system and the LogMeIn software on ensuring that only you have access when you need to.

• Palm Desktop Access does not update

  I am trying to sync my Palm E2 with my Dell desktop (windows 7, 64 bits).  Palm hot sync seems to work very well, all 12 updates take place and the E2 and office reflect all the data has been updated.  However, when I go to access software, no data was transferred from the E2 on the desktop.

  Have reinstalled Desktop Access 6.2 and sought the C drive to see if there is another access to Palm and there are no. Not sure what the problem is?  I did the same process on my laptop yesterday, Windows 8, 64-bit and everything worked finre.

  Any suggestion would be appreciated.

  Have you installed the drivers Aceeca to win 64-bit operation?  Palm Desktop will not work otherwise.

  Check if there is another available in Palm Desktop user.  Many people have recently reported the same problem as yours, when all through transfers data but to a different user account name.   Click on the 'User' area in the upper right.

  WyreNut

• How a cRIO can access remote systems VISA resources?

  I have a NI 9871 RS485 module on an ethernet 9148 RIO.

  I have also a laptop and a cRIO 9073.

  I can access each of the 9871 serial ports on the computer but not the 9073.

  When you try to access it from the cRIO, I get error:-1073807192, VISA: (Hex 0xBFFF00A8) is denied access to the resource or to the remote machine. This is due to the lack of sufficient privileges for the current user or the machine.

  How the cRIO can access the serial ports of the module 9871 on the ethernetRIO?

  Or how a remote access cRIO visa resources?

  Or how a cRIO can have sufficient privileges to access remote resources from visa?

  Thank you for your help.

  LabVIEW 2010 & VISA 5.1 on pc

  NOR-RIO 4.0 and 5.1 VISA & NI 9871 SERIES scan engine support on cRIO and eRIO

  Hi Woss,

  It is possible that your RIO Ethernet has some parameters of active access which is to prohibit the connection to serial ports.  You can change these settings in a position and Automation Explorer (MAX) for your device by going to the device under remote systems, expanding the category of software under it and choosing NI-VISA.  There will be a tab in the right pane of MAX called Options of VISA.  In this tab, select Server VISA > security to access these settings.

  From there, you should be able to add the IP address of the RIO device that needs to access the VISA on the RIO Ethernet server.  Once you have changed these settings, just click on register at the top of the window and allow the unit to restart.  Let me know if that helps!

• Desktop connection remotely from Windows 7 to windows XP Edition family

  I have a laptop running windows 7.  I'm trying to use the remote desktop connection to connect to my office.  The desk top is an Imac.  I have partitioned the hard drive on the Imac and am running windows xp home edition on the side of the windows partition.  It is this 'computer' and I try to access it via the desktop connection remotely from my laptop.  Thanks in advance,

  Rob

  The editions of Windows Home, if XP or Vista (and maybe even 7) may not be the side server to a remote desktop connection.  They do not contain the code necessary to accept the connection.

• Left mouse in the desktop connection remote

  I am a user of left mouse.  I can't find a way to make it work in desktop connection remote.  Also, I would like to change the scrolling speed to match my regular desktop.

  Hello

  What type of computer are they connected remotely to?

  I suggest you follow the steps in the links.

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

  It is possible that the computer is configured to not allow the user to change these settings based on group policy, I suggest you to follow the steps from the link and check.

  http://support.Microsoft.com/?kbid=325852

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

• 2 VPN SITE to SITE with ACCESS REMOTE VPN

  Hello

  I have a 870 router c and I would like to put 2 different VPN SITE to SITE and access remote VPN (VPN CLIENTS) so is it possible to put 3 VPN in the router even if yes can u give me the steps or the sample configuration

  Concerning

  Thus, on the routers will be:

  

  Cisco 2611:

  LAN: 10.10.10.0/24

  access-list 100 permit ip 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255
  

  access-list 100 permit ip 14.1.1.0 0.0.0.255 10.10.20.0 0.0.0.255--> VPNPOOL

  !

  10 ipsec-isakmp crypto map clientmap

  defined by peer 172.18.124.199

  match address 100

  !

  IP local pool ippool 14.1.1.1 14.1.1.254

  !

  access-list 120 allow ip 10.10.10.0 0.0.0.255 14.1.1.0 0.0.0.255
  

  access-list 120 allow ip 10.10.20.0 0.0.0.255 14.1.1.0 0.0.0.255 --> NETWORK REMOTE
  

  !

  crypto ISAKMP client configuration group ra-customer
  

      pool ippool

  ACL 120

  !

  Please note that the configuration is incomplete, I added that relevant changes, you should bring to the allow clients of RA through the LAN-to-LAN tunnel, of course, the LAN-to-LAN settings should match to the other side of the tunnel that is mirror of ACL, NAT and so on.

  HTH,

  Portu.

• Cannot access remote network by VPN Site to Site ASA

  Hello everyone

  First of all I must say that I have configured the VPN site-to site a million times before.  Stuck with it. First of all I can't ping outside the interface of my ASA remote. Secondly, VPN is in place, but no connectivity between local networks

  ASA local:
  hostname gyd - asa
  domain bct.az
  activate the encrypted password of XeY1QWHKPK75Y48j
  XeY1QWHKPK75Y48j encrypted passwd
  names of
  DNS-guard
  !
  interface GigabitEthernet0/0
  Shutdown
  nameif vpnswc
  security-level 0
  IP 10.254.17.41 255.255.255.248
  !
  interface GigabitEthernet0/1
  Vpn-turan-Baku description
  nameif outside Baku
  security-level 0
  IP 10.254.17.9 255.255.255.248
  !
  interface GigabitEthernet0/2
  Vpn-ganja description
  nameif outside-Ganja
  security-level 0
  IP 10.254.17.17 255.255.255.248
  !
  interface GigabitEthernet0/2.30
  Description remote access
  VLAN 30
  nameif remote access
  security-level 0
  IP 85.*. *. * 255.255.255.0
  !
  interface GigabitEthernet0/3
  Description BCT_Inside
  nameif inside-Bct
  security-level 100
  IP 10.40.50.65 255.255.255.252
  !
  interface Management0/0
  nameif management
  security-level 100
  IP 192.168.251.1 255.255.255.0
  management only
  !
  boot system Disk0: / asa823 - k8.bin
  passive FTP mode
  DNS server-group DefaultDNS
  name-server 192.168.1.3
  domain bct.az
  permit same-security-traffic intra-interface
  object-group network obj - 192.168.121.0
  object-group network obj - 10.40.60.0
  object-group network obj - 10.40.50.0
  object-group network obj - 192.168.0.0
  object-group network obj - 172.26.0.0
  object-group network obj - 10.254.17.0
  object-group network obj - 192.168.122.0
  object-group service obj-tcp-eq-22
  object-group network obj - 10.254.17.18
  object-group network obj - 10.254.17.10
  object-group network obj - 10.254.17.26
  access-list 110 scope ip allow a whole
  NAT list extended access permit tcp any host 10.254.17.10 eq ssh
  NAT list extended access permit tcp any host 10.254.17.26 eq ssh
  access-list extended ip allowed any one sheep
  icmp_inside list extended access permit icmp any one
  icmp_inside of access allowed any ip an extended list
  access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
  RDP list extended access permit tcp any host 192.168.45.3 eq 3389
  rdp extended permitted any one ip access list
  sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
  NAT-vpn-internet access-list extended ip 192.168.121.0 allow 255.255.255.0 any
  NAT-vpn-internet access-list extended ip 172.26.0.0 allow 255.255.255.0 any
  NAT-vpn-internet access-list extended ip 192.168.122.0 allow 255.255.255.0 any
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.60.0 255.255.255.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.50.0 255.255.255.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 172.26.0.0 255.255.255.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.254.17.0 255.255.255.0
  GHC-ganja-internet access-list extended ip 192.168.45.0 allow 255.255.255.0 any
  Standard access list Split_Tunnel_List allow 192.168.16.0 255.255.255.0
  azans 192.168.69.0 ip extended access-list allow 255.255.255.0 any
  permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.121.0 255.255.255.0
  permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.80.0 255.255.255.0
  pager lines 24
  Enable logging
  emblem of logging
  recording of debug console
  recording of debug trap
  asdm of logging of information
  Interior-Bct 192.168.1.27 host connection
  flow-export destination inside-Bct 192.168.1.27 9996
  vpnswc MTU 1500
  outside Baku MTU 1500
  outside-Ganja MTU 1500
  MTU 1500 remote access
  Interior-Bct MTU 1500
  management of MTU 1500
  IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
  IP local pool ssl 192.168.121.130 - 192.168.121.200 mask 255.255.255.0
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any outside Baku
  ICMP allow access remotely
  ICMP allow any interior-Bct
  ASDM image disk0: / asdm - 621.bin
  don't allow no asdm history
  ARP timeout 14400
  global (outside-Baku) 1 interface
  global (outside-Ganja) interface 2
  3 overall (RAS) interface
  azans access-list NAT 3 (outside-Ganja)
  NAT (remote access) 0 access-list sheep-vpn-city
  NAT 3 list nat-vpn-internet access (remote access)
  NAT (inside-Bct) 0-list of access inside_nat0_outbound
  NAT (inside-Bct) 2-nat-ganja access list
  NAT (inside-Bct) 1 access list nat
  Access-group rdp on interface outside-Ganja
  !
  Router eigrp 2008
  No Auto-resume
  neighbor 10.254.17.10 interface outside Baku
  neighbor 10.40.50.66 Interior-Bct interface
  Network 10.40.50.64 255.255.255.252
  Network 10.250.25.0 255.255.255.0
  Network 10.254.17.8 255.255.255.248
  Network 10.254.17.16 255.255.255.248
  redistribute static
  !
  Access remote 0.0.0.0 0.0.0.0 85.*. *. * 1
  Outside-Baku route 10.0.11.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 10.0.33.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 10.0.150.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 10.0.170.0 255.255.255.0 10.254.17.10 1
  Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
  Route outside Baku 10.254.17.32 255.255.255.248 10.254.17.10 1
  Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 192.168.27.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
  Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
  Route outside-Ganja 192.168.66.0 255.255.255.0 10.254.17.18 1
  Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
  Outside-Baku route 192.168.80.0 255.255.255.0 10.254.17.11 1
  Access remote 192.168.121.0 255.255.255.0 85.132.43.1 1
  Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
  Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
  Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
  Route inside-Bct 192.168.254.0 255.255.255.0 10.40.50.66 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server protocol Ganymede GANYMEDE +.
  AAA-server GANYMEDE (Interior-Bct) 192.168.1.8
  key *.
  AAA-server GANYMEDE (Interior-Bct) 192.168.22.46
  key *.
  RADIUS protocol AAA-server TACACS1
  AAA-server TACACS1 (Interior-Bct) host 192.168.1.8
  key *.
  AAA-server TACACS1 (Interior-Bct) host 192.168.22.46
  key *.
  authentication AAA ssh console LOCAL GANYMEDE
  Console to enable AAA authentication RADIUS LOCAL
  Console Telnet AAA authentication RADIUS LOCAL
  AAA accounting ssh console GANYMEDE
  Console Telnet accounting AAA GANYMEDE
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 192.168.1.0 255.255.255.0 Interior-Bct
  http 192.168.139.0 255.255.255.0 Interior-Bct
  http 192.168.0.0 255.255.255.0 Interior-Bct
  Survey community SNMP-server host inside-Bct 192.168.1.27
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
  Crypto ipsec transform-set newset aes - esp esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
  Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
  Crypto ipsec transform-set esp-3des esp-sha-hmac vpnclienttrans
  Crypto ipsec transform-set vpnclienttrans transport mode
  life crypto ipsec security association seconds 2147483646
  Crypto ipsec kilobytes of life security-association 2147483646
  raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
  correspondence address card crypto mymap 10 110
  card crypto mymap 10 peers set 10.254.17.10
  card crypto mymap 10 transform-set RIGHT
  correspondence address card crypto mymap 20 110
  card crypto mymap 20 peers set 10.254.17.11
  mymap 20 transform-set myset2 crypto card
  card crypto mymap interface outside Baku
  correspondence address card crypto ganja 10 110
  10 ganja crypto map peer set 10.254.17.18
  card crypto ganja 10 transform-set RIGHT
  card crypto interface outside-Ganja ganja
  correspondence address card crypto vpntest 20 110
  peer set card crypto vpntest 20 10.250.25.1
  newset vpntest 20 transform-set card crypto
  card crypto vpntest interface vpnswc
  vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
  card crypto interface for remote access vpnclientmap
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  name of the object CN = gyd - asa .az .bct
  sslvpnkeypair key pair
  Configure CRL
  map of crypto DefaultCertificateMap 10 ca certificate

  crypto isakmp identity address
  ISAKMP crypto enable vpnswc
  ISAKMP crypto enable outside-Baku
  ISAKMP crypto enable outside-Ganja
  crypto ISAKMP enable remote access
  ISAKMP crypto enable Interior-Bct
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  aes encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 40
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  Crypto isakmp nat-traversal 30
  No vpn-addr-assign aaa
  Telnet timeout 5
  SSH 192.168.0.0 255.255.255.0 Interior-Bct
  SSH timeout 35
  Console timeout 0
  priority queue outside Baku
  queue-limit 2046
  TX-ring-limit 254
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Server NTP 192.168.1.3
  SSL encryption, 3des-sha1 rc4 - md5 aes128-sha1 sha1-aes256
  SSL-trust point ASDM_TrustPoint0 to vpnlb-ip remote access
  SSL-trust ASDM_TrustPoint0 remote access point
  WebVPN
  turn on remote access
  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
  enable SVC
  tunnel-group-list activate
  attributes of Group Policy DfltGrpPolicy
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  internal group ssl policy
  attributes of group ssl policy
  banner welcome to SW value
  value of DNS-server 192.168.1.3
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  group-lock value SSL
  WebVPN
  value of the SPS URL-list
  internal vpn group policy
  attributes of vpn group policy
  value of DNS-server 192.168.1.3
  Protocol-tunnel-VPN IPSec l2tp ipsec
  disable the PFS
  BCT.AZ value by default-field
  ssl VPN-group-strategy
  WebVPN
  value of the SPS URL-list
  IPSec-attributes tunnel-group DefaultL2LGroup
  ISAKMP retry threshold 20 keepalive 5
  attributes global-tunnel-group DefaultRAGroup
  raccess address pool
  Group-RADIUS authentication server
  Group Policy - by default-vpn
  IPSec-attributes tunnel-group DefaultRAGroup
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  IPSec-attributes tunnel-group DefaultWEBVPNGroup
  ISAKMP retry threshold 20 keepalive 5
  tunnel-group 10.254.17.10 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.10
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  type SSL tunnel-group remote access
  attributes global-group-tunnel SSL
  ssl address pool
  Authentication (remote access) LOCAL servers group
  Group Policy - by default-ssl
  certificate-use-set-name username
  Group-tunnel SSL webvpn-attributes
  enable SSL group-alias
  Group-url https://85. *. *. * / activate
  tunnel-group 10.254.17.18 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.18
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  tunnel-group 10.254.17.11 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.11
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  type tunnel-group DefaultSWITGroup remote access
  attributes global-tunnel-group DefaultSWITGroup
  raccess address pool
  Group-RADIUS authentication server
  Group Policy - by default-vpn
  IPSec-attributes tunnel-group DefaultSWITGroup
  pre-shared key *.
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the rsh
  inspect the rtsp
  inspect sqlnet
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  Review the ip options
  class flow_export_cl
  flow-export-type of event all the destination 192.168.1.27
  class class by default
  flow-export-type of event all the destination 192.168.1.27
  Policy-map Voicepolicy
  class voice
  priority
  The class data
  police release 80000000
  !
  global service-policy global_policy
  service-policy interface outside Baku Voicepolicy
  context of prompt hostname

  Cryptochecksum:4f35f975ba7a0c11f7f46dfd541d266f
  : end
  GYD - asa #.

  ASA remote:
  ASA Version 8.2 (3)
  !
  ciscoasa hostname
  activate the encrypted password of XeY1QWHKPK75Y48j
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  DNS-guard
  !
  interface Ethernet0/0
  nameif inside
  security-level 100
  IP 192.168.80.14 255.255.255.0
  !
  interface Ethernet0/1
  nameif outside
  security-level 0
  IP 10.254.17.11 255.255.255.248
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  nameif management
  security-level 100
  no ip address
  management only
  !
  boot system Disk0: / asa823 - k8.bin
  passive FTP mode
  access-list 110 scope ip allow a whole
  192.168.80.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  management of MTU 1500
  Within 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow all outside
  ICMP allow any inside
  ASDM image disk0: / asdm - 621.bin
  don't allow no asdm history
  ARP timeout 14400
  NAT (inside) 0 access-list sheep
  Route outside 0.0.0.0 0.0.0.0 10.254.17.9 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 192.168.80.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
  Crypto ipsec transform-set newset aes - esp esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
  life crypto ipsec security association seconds 2147483646
  Crypto ipsec kilobytes of life security-association 2147483646
  correspondence address card crypto mymap 10 110
  card crypto mymap 10 peers set 10.254.17.9
  mymap 10 transform-set myset2 crypto card
  mymap outside crypto map interface
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  aes encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 40
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN

  tunnel-group 10.254.17.9 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.9
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname

  Cryptochecksum:1c1ac60e2fb84f65269d15d53f27c21b
  : end
  ciscoasa # $

  Still, I can't ping ASA remote outside from outside of the Local interface. And there is no connectivity between the 192.168.80.0 distance and local don't say 192.168.1.0. I have run out of ideas

  Would appreciate any help. Thank you in advance...

  If the tunnel is up (phase 1), but no traffic passing the best test is the following:

  Add order management-access to the Interior , and then try to PING the intellectual property inside ASA counterpart.

  inside x.x.x.x ping --> x.x.x.x is the IP of the ASA peer inside

  The test above shows if the traffic passes through the tunnel (check encrypted/decrypted packets of sh cry ips its).

  Test on both directions.

  Please post the results.

  Federico.

• OBIEE 11 g there is function

  Hi all

  I'm on there is function in says it works fine

  But

  during the observation data, data are incompatible with the particular product category, why because two category s (A, B) have subcategory namesake (base)

  Cat CAT sup

  A  ------        Basic

  A - value added

  A - high

  B -------     Basic

  B Bass

  B way

  My report has five columns like CM-1 CM - 2 CM - 3, -4 CM, 5 CM,

  When I was a selection A cat and subcat is Basic, data as below...

  CM-1 CM-2 CM-3 CM - 4 CM-5

  Has basic has basicB basic B basichas basic       

  If subname of cat is different without offspring

  Please help me.

  
  

  Concerning

  RM
  

  You can create a key made up of Cat + SubCat (in a logical column concatenation is a quick victory) which will return the single SubCats and assign it as the logical level key:

  SubCat:

  A Basic

  A - value added

  A-high

  B Basic

  ...

• Creating shadows of text - is there a function for this?

  I would like to create a shadow effect for my text in my headers.  Is there a function for this?

  In the current version of Muse you can only apply effects to pixelated fonts (fonts). If you need a shadow to the other fonts effect, you can do the following:

  1. create a paragraph style, name it as you need (for example shadow_paragraph) and assign to the text element you need to be affixed.

  2. go in the Page Properties > metadata > HTML customized to(Or insert HTML to a master page)

  3 insert a

• My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

  My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

  N °

  but maybe you tap the camera icon (bottom-right) when you press the icon of the torch (with the other hand maybe?)

• Qosmio F30: Is there a way to get the remote to work directly with built in receiver

  My remote control Media Center only works when I plug the Receiver USB on my Qosmio F30 yet will work directly to the laptop with the vista media center pre program.

  Is there a way to get my remote to work directly on the built-in receiver?

  Steve.

  Hi Steve

  There is unfortunately no way to do it. Qosmioplayer is also part of the media offered by this book, and as you know this small Linux based application runs without booting the operating system. Due to this USB port can not be used (external receiver) and because of this one way remote control with Qosmioplayer is infrared receiver window.

  I'm not a technician and can explain you why this little infrared window is not used with the operating system running but, I'm sure, there must be a technical reason for it. Anyway, there is nothing to do, and you have to live with it. :(

• Cannot run executable LabVIEW on desktop connection remote

  I have a couple of executable files, which are compiled using a LabVIEW 2011 development system, installed on a Windows XP computer.  These programs run fine when I double-click the icon while sitting at the computer.

  If I connect to the phone remotely from another Windows XP computer using Remote Desktop connection, I can use the remote computer normally except for the executables LabVIEW.

  When I double-click on one or the other, I get the error message displayed in the attached file. The part of the text of the report has no useful information, just two lines that seem to be field for e-mail names.

  What gives?

  Remote debugging is not a good substitute because it requires the executable file already be running.

  I was able to run two executables LabVIEW on desktop connection remote to a virtual machine of Windows 7 with 2 GB of RAM, running on a MacBookPro using Parallels Desktop.

  This confirms that the problem was insufficient for memory resources.

• (1) is there a function for all the object of the same size?

  (1) is there a function for all the object of the same size?

  Sorry, I thought you wanted to align the objects.

  We do not have the function to make items of the same size. You must change one by one. To change the .lks file may be more effective.

• I am not able to make a desktop connection remotely through Citrix

  I use Citrix to connect to my desktop of my computer at home.

  For the last two weeks, I had connection problems. Sometimes it works, but more often, it isn't. I get the error message says the following:

  "The specified remote computer could not be found. Check that you have typed the correct computer name or IP address, and then try to connect again. »

  I know I type the correct computer name because it is saved in my drop-down list. As far as I know, nothing on my desk, computer or computer at home has changed, but the problem is incompatible because sometimes it connects and sometimes is not.

  Basically, the steps I take are as follows:
  1. go on citrix. [company] .com
  2. enter my username and password and click Connect
  3. click on the desktop
  4. I get a pop up message saying I chose to open launch.ica coming http://citrix of Citrix ICA connection. [company] .com. What should Firefox do with this file?
  5. I choose to open with Citrix ICA Client Engine Win32 (default)
  6 then I get another pop up message saying this program has known compatibility issues and Citrix ICA is not compatible with this version of Windows. -C' is the same message that appears still, and it's always worked before.
  7. I click on the program
  8. it brings me to a generic research office running Microsoft Windows Server 2003 R2
  9. I then click on the Start Menu and choose desktop connection remote
  10. I select the name of the computer in my office (which is default) and click on connect

  That's when I get the error message.

  Anyone know what could be the problem and how can I find a solution?

  Hello

  Sorry for the Delisle in response.

  Given that the problem is related to the remote desktop connection, I suggest you contact the assisted support by using the following links:

  https://www.Citrix.com/support

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

  I hope this helps.