Is there a Manager Bluetooth of Windows 8 that I need to use my device access?

Similar Questions

• is there a minimum set of windows services that can be run under Labview?

  I need more cpu resources to perform my VI, is there a list of Windows resources that I can disable that will not affect the VI?

  Hello

  I would like to know if there is a minimum of services set in really need of LabVIEW. Not because my VI needs more CPU, but because I don't see why I should have 10 services OR running in the background even when LabVIEW is not working.

  The list of services OR that I have running on my Vista 64 bit system when LabVIEW is not running is:

  national instruments tagsrv.exe 1 k 9 996 variable motor

  2 nisvcloc.exe NOR 0,920 k service locator

  3 NOR-PAL 3 492 k nipalsm.exe service manager

  4 NOR-Pal 7 468 k nipalsm.exe service manager

  5 nipalsm.exe service manager OR-Pal 21 356 k

  service of National Instruments Zeroconf nimdnsResponder.exe 6 k 1 924

  7 niLxiDiscovery.exe National instruments LXI Discovery Service 1 592 k

  nidmsrv.exe 8 nidmsrv 3 492 k

  lktsrv.exe 9 iktsrv.exe 3 480 k

  10 lkads.exe lkads 3 124 k

  TOTAL 56 844 K

  Anyone know which of these I really need? I do not connect any equipment data acquisition on this machine. It is purely used for writing vi which are then transferred to another machine where they are tested. I have installed DAQmx and LabVIEW 8.6.

  Thank you.

  J

• Is there a way to group windows so that clicking on a button, they all appear?

  I have a setup where I have three Windows Open (a half on-screen OneNote window and two Windows Word quarter screen).  I usually need to all be open at the same time, but I find myself constantly spend away from internet or walkmans or similar browsers and then have to set all the three buttons on the taskbar.  Is there a way to group them all together, so that by clicking on one of their buttons on the taskbar, they all forward?  I guess I asking for a version of Windows, several computers desktop Mac, but with a button on the taskbar.  Did something like that exist?

  Hi Mysteryg45,

  I understand that your question is clearly that you want three or more different windows open at the same time click on an icon (see the desktop).

  To do this you must resize the windows according to your use (for example: a half on-screen OneNote window and two Windows Word quarter screen), then click on the view the destop icon.

  The Show Desktop button is a rectangular bar at the end of the task bar, like a bookend on the Start button. Aero Peek will instantly reduce your open windows with the Show Desktop button.

  It will not be possible unless these windows is been active and recently used.

  You can also view the Microsoft article for more information:

  Show, hide, or resize desktop icons

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-hide-or-resize-desktop-icons

  Hope this information helps.

• Why try to install Windows XP Home edition, I get a message that I need to use the full version. It is the full version.

  XP Professional - Full Version installation problem

  I have an old laptop - been putting up with my old XP Professional - Full Version software so my children can use for games and I get a message that I need to install Windows XP Home Edition - full Version.

  What is the screen, you see? If Yes, are you pressing enter as you should?

  

• Is there a way to remove "bootstrap" features that are not in use?

  Is there a way to remove "bootstrap" functions that are not currently in use of the css 'bootstrap' or is it necessary?

  You can customize the Bootstrap in the link below by choosing only the components/css to use, but unless you know what you're doing the Bootstrap default css file is best left alone. The extra css that you do not use does not really hurt.

  http://GetBootstrap.com/customize/

  I assume that you use the correct workflow - bind to Bootstrap css by default and then file if you want to avoid linking to your own css default css stylsheet. If you do this the default bootstrap css works without danger in the background. Yes, because of course, I understand what you say - why the hell have a zillion redundant css selectors that are related to the page if you use only a few dozen.

• When I try to download an extension for my CC Adobe Extension Manager, I get the message that I need the version of photoshop version 13 or more.  I just installed Photoshop cc over the weekend.

  When I try to download an extension for my CC Adobe Extension Manager, I get the message that it requires Photoshop version 13.0 or greater.  I just downloaded photoshop CC this weekend

  PS What version of the extension manager? Make sure that you do not use the CS6.

• Are there any important updates for windows 8 that help stop problems?

  Please give me the name of these updates, which contributed to major problems in windows 8?

  The 8.1 update resolves more than 400 has reported problems, crashes, bugs and glitches.

  But each are cumulative: you cannot install hotfixes later until you install the previous ones.  Each of them is based on the previous to avoid file version conflicts.

  Once you have installed all the updates available, if you have any questions, we can focus on them. What questions do you have?

• You want to connect to Xbox Live 360 using labtop. Cannot use WMI. Windows says THAT WMI is damaged, use the system restore. System Restore will not restore to any point I use.

  I tried to connect to Xbox Live on my Xbox 360 to internet using Wi - Fi to my labtop. I want to enable sharing on this topic in the Advanced tab, but I get the message that says WMI is damaged and I need to use the system restore. However, the system restore will not restore the system at any time I choose. What is the solution?

  OK you have an ETHERNET cable? (cable for PC to the Modem)
  What OS do you have?

  Heres to help, you need to an ethernet cable, or adapter wireless XBOX 360.

  With the ethernet cable, connect one end on the XBOX and one end to your laptop.
  You go to control panel > network and Internet > network and sharing Center > change the adapter settings. Then you select your wireless network and your local network. Then you right click and press 'CONNECTION of BRIDGE' (requires administrator privileges). After that your DONE! Just check if it works on your XBOX 360!

• Still problems with the adapter Bluetooth Toshiba Windows 7

  Hey there, it's me again.

  I am referring to my 'Problem Bluetooth on Windows 7' subject:

  I thought after the solution of bluecat that my problem has been resolved. But it isn't really.

  After you install the Windows fix, it worked just a short time. But now the problem is the same.

  When I remove the Toshiba Bluetooth Stack and try to work with Manager Bluetooth of Windows, I see that the Bluetooth icon is to come and one to go on the taskbar. In Device Manager, I said Windows, that it is not closed the device to save power. But I think that the device is on and walk and stop...

  I really absolutely have no idea what is the problem, but I get terribly angry.

  Details:
  Windows 7
  Dell Wireless Bluetooth internal adapter 350 (but it is manufactured by Toshiba)
  Experienced pilots: Vista Pack of profile of the Dell homepage (no battery installed, driver only) / Toshiba Bluetooth Stack (the latest version)

  This is the old thread:

  Hi all

  Just as I installed Windows 7, my keyboard and Bluetooth mouse do not work very well.

  I use the Dell Wireless 350 Bluetooth internal adapter, Toshiba Bluetooth Stack 8.00.02 and the keyboard and mouse Logitech MX1000.

  To connect the devices on my computer, I first have to disconnect the Bluetooth adapter by pressing Fn + F2 on my Dell i9400, after re-login I can search and connect devices correctly. They work fine as long as the laptop is running.

  After restarting the laptop, devices no longer work. They are still in the known, but not connected Bluetooth stack. That's why I have to unplug the adapter Bluetooth, another time and reconnect in order to connect the two devices.

  I first thought, it's a Windows problem. I thought that Windows is able to ask the adapter to save power. But when I go to Device Manager, there is no box for this option, as known from other devices (Te USB Ports). If this isn't the problem. I think the problem is something else, maybe performed by the Bluetooth stack.

  Windows XP it worked perfectly. I used the same hardware and also the battery Bluetooth Toshiba (uploaded on the homepage of Dell).

  Someone at - it ideas?

  Thank you!

  Daevu

  Hey there

  Yesterday I did Format C: and installed Windows 7 news.

  I do not have a bluetooth driver for my Dell Wireless 350 Bluetooth adapt (made by Toshiba).

  And now: the mouse and the keyboard work. I even do not see anywhere in my system, but they work.

  There is no bluetooth adapter in my device manager and I had do not connect the keyboard and mouse with my computer. She simply do nothing.

  I do not understand this...

  What is a backup connection?

  What I tried:
  -> Installation more recent Bluetooth Stack from Toshiba. Problem in the above message. I also installed the MS Hotfix. The same problem.

  -> Installed "Vista profile Pack" on the home page of Dell, recommended for my laptop and Windows Vista. There is no battery installed. So I had to connect the mouse and keyboard via the Windows Bluetooth Manager. But the adapter was performed on and off windows, the icon in the task bar came and went and came and went. Connection is good, 1 minute then a few seconds. Not possible to work with the mouse.

  And now, without having to install a driver, it works. Am I stupid?

  Daevu

• device driver Bluetooth for windows 7 64-bit sony vaio

  Hello

  I need device driver bluetooth for windows 7 64 bit for sony vaio

  device driver Bluetooth for windows 7 64-bit sony vaio

  Please help me

  -Nicolas

  After spending an obscene amount of time researching this Bluetooth stupid nonsense this week, I finally opted for a solution.

  This is how to solve the "Bluetooth peripheral device is not a driver:
  I use the following materials in a dozen different tests:
  -Only for Broadcom based on USB from Belkin and Targus dongles
  -Windows 7 Professional 64-bit on four different computers
  -4 different Bluetooth headphones: Plantronics One, a matrix and two Motorola
  -Bluetooth file transfer wasn't of interest, but I tested with two different phones
  This guide will be useful for those with similar... hardware configurations and for those who have tried all the other nonsense without result.  Especially that many times repeated "Just install Windows Mobile Device Manager."
  -- -- --
  Step 1: Ignore 99% of you think that you have learned about this problem.
  It will be * probably * boil down to a missing COM port.
  Step 2: Certainly ignore the bit about installing the Windows Mobile Device Center
  (Unless you have a Windows Mobile-based phone and/or have another use for a flavor of Windows 7 of Activesync).
  Step 3: Stop looking for a driver for something called a "Bluetooth device device.
  There is no such thing. If you look at the Bluetooth installation take place, you will notice that all the components of the Bluetooth technology initially as "Bluetooth Peripheral Device" and then once Windows ID each element, the appropriate driver is installed and the name replaces "Bluetooth Peripheral Device" to something like "Hands-free Bluetooth Audio" or "Bluetooth Remote Control" etc.
  -- -- --
  Unfortunately, most of the people reading this will have tried one or more of the following:
  1.) install this stupid Windows Mobile Device Center
  2.) install any number of drivers Bluetooth who-knows-what from who knows where
  (3.) running all kinds of utilities third driver
  4.), forcing several facilities from pilot to operate in Win98, XP or Vista
  5.) sacrificing countless animals
  The end result is a plethora of useless software and/or driver and/or updates... facilities and some dead animals.
  -- -- --
  Instead, here is the solution.  I tested it with three different USB Dongles (2 Belkin and Targus 1) and on four different machines: HP, Sony, Toshiba and another HP. Two were newly not framed with Windows 7 Professional 64-bit and two have been upgraded to Vista to the same OS.
  With each machine, I plugged the following helmets: a legend of Voyager from Plantronics, Motorola S9, Motorola S805 and matrix AF62 and a Samsung S3 and an HTC Android.
  So I guess it's fair to say that it is a solution for one of these dongles... but in reality, most based on Broadcomm USB dongles is affected. I ran across these stages in four different boxes after checking that the beast ""Bluetooth peripheral device is not a driver " "
  appeared during installation.
  1.) If you did any of the unsuccessful steps mentioned above, enter the control panel and delete everything that you have installed.  Kill all the entries Broadcomm or Widcomm bluetooth. Delete all 3 rd-party driver maintenance apps. Restart a machine clean.
  2.) locate and install a Broadcomm 6.0.1.6300 OR 6.2.1.500 driver.  Either one works, but the last (most recent) has much better management tools for Bluetooth device
  .  I tested the installation of separately and also starting with 6.0.1.6300 and then upgrade to 6.2.1.500.
  (Ignore the stupid Updater Driver Broadcomm they grow to their website - it is useless for the majority of us out there.)
  (3.) that you install one of the above, you will see a notification regarding the installation of the various components.  Click this pop-up window and watch the progress.  You will see that each "Bluetooth Peripheral Device" Gets a new name, as the related driver is installed.  In my tens + tests, each & every item at this point got the green check mark of success.
  4.) now attempt to pair the device of your choice
  .  IF only the manufacturer provides separate drivers, do not install them again, regardless of their instructions.  See how Windows gets its own.
  5.) as soon as the match starts, you will see more notifications for individual driver components.  Click on one of them and observe a similar progression... Except that you will have a ""Bluetooth Device device ' with the dreaded Red X and the complaint that no driver was found. "
  6.) do not despair
  ! This happens the first time connect you a new Bluetooth device.
  7.) wait for the installation to complete.  Despite the dialog box display the list of components of Bluetooth with a red X, you probably have another window saying that the perfectly paired Bluetooth device.  But you and I know that he didn't. Confidently click to close this dialog box.
  8.) open Device Manager (via the Control Panel, the computer properties), and you will discover that cursed Device Bluetooth that is sitting there in the Middle under 'other devices '.
  9.) right click on the Bluetooth device with the yellow exclamation mark under 'Other devices' and select 'Update Driver' - then:
  Click on:
  a.) browse my computer for driver software
  (b) let me pick from a list of device on my computer drivers
  (c.) in the common hardware types list, select:
  --->>> Ports (COM & LPT)<>
  d.) d.) under manufacturer, select Microsoft
  e.) depending on the model, choose "Standard Serial over Bluetooth Link" & click "next".
  f.) when you are prompted with the update driver warning, click 'yes '.
  g.) with joy to read the message that "Windows has updated the driver software.
  (h.) read for pleasure, and then click "close".
  (i.) to confirm that this disorder is really fixed (assuming compatible devices, etc.) Right-click on the Bluetooth device and choose "Troubleshoot" - that there should be no reported problem.
  10.) you shouldn't have to restart, but you POURRIEZ have need spend the power of your Bluetooth device Off & turn it on again to let it reconnect again (just NOT re-pair... re - connect). About a dozen tests, I had only to do once, and it was with a 3-year-old-Bluetooth headset.
  -- -- --
  I have argued my way in the solution by installing on a Vista machine where everything worked perfectly.  After the installation of various devices under Vista, I spotted the COM Port in Device Manager - which was the only element that did not appear in the installation of Windows 7... but instead remained at the dreaded 'Bluetooth Device device".
  Windows Mobile thing worked only for some people because it was fundamentally address a bunch of different physical possibilities... but for those who did not have success, it's because Windows Mobile Kitchen Sink approach did not include the driver Port com
  -- -- --
  Voluntarily, I don't understand not all links to the drivers as one.) change links and b.) I don't want to be responsible for some knucklehead packaging site a Trojan horse in the zip file.  Let Google your friend and your instinct be your guide.
  I will say that I used a 6.0.1.6300 directly from the Belkin site and a 6.2.1.500 directly from the site of the bridge.
  I hope this saves people a lot of frustration.

• How to enable Bluetooth in Windows 8

  I have a TOSHIBA Satellite SL850-B386i5 model PSKG8V-009002AR installed with WINDOWS 8 operating system.

  Although I see there are drivers bluetooth in the system, unfortunately, I can't use the Bluetooth to connect a device such as a bluetooth mouse or a compatible bluetooth phone.  I can see a Bluetooth icon in the notification are as well.

  Could you please help me to solve this problem.

  Perhaps see if the settings of PC can find your bluetooth device and find it for you. It's under the "devices and PC" then "Bluetooth" section.

  Note: You must install the 8.1 update to see this. If you haven't already done so, download the update in the store.

  

• My Windows Vista laptop (dv9000 HP) is unable to update the drivers for the drive DVD-cannot use the device.

  The above mentioned laptop displays error Code 39 in Device Manager. I tried to remove the device and scan for hardware, but not able to download the drivers needed to use the device. Help, please. Thanks to you all.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  There are many causes of Code 39 errors in Device Manager:

  a. a required device driver is missing.

  b. a required binary file is corrupt.

  c. There is a problem with the file I/O process.

  (d) a pilot that refers to an entry point in another binary file cannot load.

  The recommended solution is to remove the device and reinstall the drivers for this device. As you have tried this step, I suggest you to try the steps mentioned below and check:

  Step 1:

  Try the fixit mentioned first and check if the dvd player works:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Step 2:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista

  http://support.Microsoft.com/kb/929461

  Step 3:

  Try the steps in the following link and check if the dvd player works:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you have any questions do not hesitate to answer, we would be happy to help.

• Activating Windows indicates that an error has occurred

  Last night I had an open window that told me there was an error activating windows and that my version of windows was not valid. When I try and open the Windows Activation it tells me an error has occurred. Code: 0 x 80070424.

  I use the windows which was preinstalled on the computer. BUT, I ended up having to purchase backup discs from Toshiba and the service center he relocated to me. Not sure if there is a problem or if it is internal.

  Help, please.

  Thank you

  Will be.

  Hi Will,

  And what you say now? If I understand the computer is now reinstalled with Toshiba recovery disc, so all is ok now or you always have problems?

  The version preinstalled Windows from Toshiba is still active and read to use so that I can t imagine you must activate your copy of Windows if it was preinstalled on Toshiba drive or recovery

• Windows 7 Professional... How to get access to security to view my external hard drives and external flash dirves

  I am a first time user to windows 7 Professional and need to learn how to access files that are connected to the computer by an external flash drive or an external hard drive.

  External or external flash drives hard drives can be connected to windows 8 computers or windows xp to view the files, but when then identical external or external flash drives hard drives are connected to two computers with windows 7 Professional there are settings automatically don ot all access to the external hard drive or flash drive external files.

  When the computer display, it displays the external hard drive.

  When I left click top produces a pop up with the title bar: location is not available

  Content: H: | is not accessible.

  Access is denied.

  When I right click on the hard drive and then click the Security tab, it displays:

  Name of the object: H: |

  To continue, you must be an administrative user with permission to view this object's security properties.

  Do you want to continue?

  Then I clicked on continue and it displays:

  Owner

  You do not have permission to view this object's security properties.  To view its security properties, you can try to take possession of the object.  As owner, you can also control who gets the permissions on the object.  Please note that once you take possession, the previous owner may not have access to the object.

  To try to take possession of the object, select an account from the list, and then click OK.

  Name of the object: H: |

  Current owner: unable to display current owner.

  Change in ownership to:

  the two choices are my name or administrators

  I then chose an and apply and ok and it did not work.

  I then chose the other and apply and ok and it did not work.

  Then I clicked on other users or groups and entered everyone and that no longer works.

  I am the only user of this computer brand new.

  When I click on accounts Panel then user control and security for the family and then user accounts, it displays my name as administrator password.

  What are the steps that I can buy an external hard drive or buy a flash drive or use the ones I already have and use them with this computer which has windows 7 Professional?

  How is the switch of the property did not work?

  I went back to safety again and this time stayed at the bottom for special permissions or advanced settings.

  And yet when I kept getting location is not available

  H:\ is not accessible.

  Access is denied.

  How do change you windows 7 Professional so that you can have access to your own files on an external hard drive or an external flash drive.

  Please list the steps.

  Thank you

  This problem has been resolved in collaboration with support of higher HP for Z book 17 mobile workstation.

  Steps:

  (1) determines that it is not NTFS problem

  (2) using the MSCONFIG the problem has been isolated to a single service

  When this service has been disabled and after reboot, the problem of access to the files is resolved.

  Results: HP had installed software on the HP Z book 17 laptop or mobile workstation which, by default, block communication with external hard drives and flash drives external.

  This HP Client Security software replaces or blocks all right click changes settings become apparent.  It blocks the change of ownership.  It blocks the administrator privileges.  It blocks all is used.

  The HP Client Security software has been changed and changed to deny privileges (default setting) to allow the communication with external drives.  When you go into the setting for this software, it is now a humming noise and maybe I need to download the drivers and software again to see if this problem is also corrected.

  Thanks for your comments.  I spent a lot of time on this and didn't understand why all right-click methods had failed.  The default software setting HP deny had trumped right click all changes.

• Is there a way to save the computer that was given to me?

  I have received a computer with no startup disk and need to save it. The computer is a Dell with MS Windows XP Home Edition 2002. Is it possible to register the computer?

  jac516,
  When you say that you need to the "Save" what exactly are you meaning?  You get a popup window indicating that you need to do something?  If the PC was set factory default before being returned to you, then you will need to activate your copy of Windows.  If this is the case, then you can click on start > all programs > Accessories > system tools > activate Windows.

  If you are prompted for a different record type, then you will need to contact Dell. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.