Is there a quality of Service setting my Airport Extreme?

Similar Questions

• Cannot set the Airport Extreme to extend the existing network

  Network WiFi of my holiday home is provided by the router from my ISP (Time Warner). I have an Airport Extreme, which used to be configured to provide the WiFi network to another well, and I would use it to extend the existing on the TWC router network.

  I had a lot of trouble to do a factory reset on the Airport Extreme, but I'm sure I managed (by turning on with the pressed reset button) after several attempts. At least the extreme doesn't show signs of the old network, he has provided.

  When I try to set it up in the Airport utility, he wants only to create a new network. If I click on 'Other Options' and select 'Add to an existing network', the next screen is titled "This Airport Extreme will create a network" and prompts to enter a new network name and password. (Specifying the name of the network current generates an error because the network already exists, as I expect for the creation of a new network.)

  Any ideas on how to tweak this Airport Extreme by extending a network?

  TIA,

  Doug

  P.S. I have reviewed plugging extreme in one of the TWC router EtherNet ports and create its own WiFi network (with the advantage of adding support for 5 GHz), but the last time I tried I lost all connectivity; I'm afraid that the ISP network might protect against too broad network, although the glitch may have been a coincidence. If anyone has experience/ideas on this alternative configuration, I might be willing to try again.

  AirPort Extreme would not be able to connect using a wireless connection and to extend the wireless network of the ISP, but if you can connect the AirPort Extreme to the ISP using a permanent router, wired Ethernet cable, then AirPort Extreme could be used to provide broader coverage of wireless in this way signal.

• QoS (Quality of Service) - Noob who has need of advice & help

  Hi all

  I did some research using Google, it is possible to use QoS to control bandwidth on wireless networks and wired.

  I use a router WRT54GS v1.1 that has this capability.

  I am wanting to control the bandwidth on my wireless so that my Ethernet (wired) becomes a priority of my internet connection.

  I activated the "Support WMM" option in the configuration of routers (Applications & Gaming).

  Explanations of the router are:

  "

  Two types of quality of Service features are available, Wired QoS controlling devices connected to the router with a cable Ethernet and Wireless QoS, who control the devices connected to the wireless router.

  Capture Wired QoS (qos.wqos)

  Capture (QoS.right2)Device Priority: you can specify the priority for all traffic from a device on your network by giving the device a device name, specifying priority and entering its MAC address.

  Capture (QoS.right3)Ethernet Port priority: you can control your data rate according to which physical LAN port, your unit is plugged. You can assign a low or high priority to devices on the LAN 1 port on 4 data traffic.

  Capture (QoS.right4)priority Application: you can control your data rate as the application that consumes bandwidth. Check Optimize the gaming Applications to automatically allow the application of common game ports to have a higher priority. You can customize up to eight applications by entering the port number they use.

  Capture (qos.wlqos) QoS wireless

  Capture (qos.right5) wireless QoS is also referred to as Wi-Fi (WMM) MultiMediaTM of the Wi - Fi alliance. Select activate to use WMM if you use other wireless devices that are also certified WMM.

  Capture (QoS.right6)without acknowledgement: select this option if you want to deactivate the acknowledgement. If this option is enabled, the router not re - sends data if an error occurs.

  "

  OK, now I understand everything what qouted above without any problems but feel there is lack of information.

  Exactly how does the QoS wireless? Need details of depth.

  that is, if I'm online games on my Wired node (PC in this case), who gets priority bandwidth above the node wireless (laptop - only surf the internet)?

  Thanks in advance,

  Peter

  Hi all, I got this working now. It was something to do with the following:

  Current firmware seems to have some bugs, but I will list those in another message

  -J' had to put the IP Address of the default router 192.168.1.1 that the definition of a caused different IP address wireless devices (laptop) does not connect to

  -Setting a different download speed that 'Auto' seems to cause the wireless devices do not connect

  Will post firmware problems in another post to alert anyone who needs to know in order to make the appropriate changes.

  Pete

• is there a way (or an app?) to set up a local proxy server on the airport extreme or time capsule?

  Hello

  If you have the answer! I'll be so happy!

  is there a way (or an app?) to set up a local proxy server on the airport extreme or time capsule?

  Thanks for your time!

  BR,

  Stéphane

  All routers, including the AirPort base station, run as a transparent proxies for the local network behind them. However, if you are talking about the possibility of proxy requests between the LAN and Internet, then no, the airport base stations do not have a native function to support doing so.

  The two common methods to accomplish this are: 1) use a proxy on your local network, or 2) use a DNS, like OpenDNS service, which offers proxy services.

• Quality of Service with WRT610N and Vonage

  I try to get the quality of Service, in collaboration with my WRT610N and my Vonage device.  The WRT is connected directly to a cable modem, and the Vonage device is connected to the Ethernet 1 port.  I have configured the MAC address of the Vonage on the QoS tab as 'High' priority (done by selecting the 'voice device' on the drop-down list category).  In addition, I put my Vonage options (on the my account page of the Vonage site) to use the higher throughput (90 kbps, I think).  Any other setting QoS have been made.

  However, the router seems not to be the QoS application at all.  If I do any kind of surfing at all (dragging around on Google maps to load new pages of satellite is a good test), the quality of voice over a call during Vonage is very choppy.  What I have to do something else to make sure that the Vonage device gets highest priority?

  Follow these connection parameter:

  Modem (DSL/Cable)-> VONAGE-> WRT610N

  Your Modem must be connected to your VONAGE and your VONAGE Ethernet, plug it into the Internet Port of you router LINKSYS. You also check the VONAGE internet connection by connecting your PC to your Ethernet VONAGE before connecting the WRT610N router.

• On a Windows 7 computer, I installed Firefox 9.0.1 and in my menu edit I have NO preferences at the bottom, so there is no way to set all the parameters

  On a Windows 7 computer, I installed Firefox 9.0.1 and in my edit menu I have NO preferences at the bottom, so there is no way to set all the parameters of the Edit menu opens and I cancel, redo, cut, copy, paste, delete, select all, find... but WITHOUT preferences below. This is a new laptop and nothing like Skype is installed. Installation of Firefox is again today 06/01/12

  Hi bruce,.

  What actually are you looking for? On Windows 7, your options will be under Tools > Options. If you have the Firefox menu, you can press Alt to temporarily activate the menu bar.

  The details of your system say Linux. Say you're on Windows 7 However, correct?

• Is there a way you can set up a printer hp 7520 to analyze the auto size?

  When I scan from the printer or the computer, I either make real and then later crop size or size to scan. When I had my photosmart hp over the printer. I had to do this it would automatically detect that and scan at that size. Is there a way I can set up my printer to automatically detect the size of everything in the printer? I thought a new printer would be better, but it is causing more and more problems I.

  Hello

  Unfortunately not for this printer, you must select the scanning area we want to analyze

  Kind regards.

• I heard that there is a paid service allow customers to return their emails if pirate? is this true? details please

  I heard that there is a paid service allow customers to return their emails if pirate? is this true? details please

  Hello

  ·         What e-mail do you use?

  If you use Hotmail you can view the article and check if it helps.

  Recover deleted messages from your Windows Live Hotmail mailbox.

  http://windowslivehelp.com/solution.aspx?SolutionID=1f8432d5-4f7b-4468-9c98-bdf3a469783a

  I hope this helps.

• Reader network Windows media services setting keep happen to automatic (delayed) sharing

  Hi Im having problems with Windows Media Player 11.

  I noticed the drive share network windows media services setting the parameters of the service, has been set to automatic (delayed). I changed it to automatic only so I can stream video files to my Xbox 360. Go to the oprtions streaming in wmp and turn on allow streaming media. It works fine but only for a few minutes, then the service settings changes itself to automatic (delayed). This keeps happens whenever I change, the Dungeon settings changing to automatic (delayed).

  I hope you can help,

  Kind regards

  Gary.

  Hello

  I suggest you to check the link for the error 1053 and check if it helps:

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  I suggest you also for the link and run the Microsoft Fix it:

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

• WAAS and quality of Service (Jacques)

  I currently have WAAS deployed in my environment. I would like to introduce you to David in order to avoid the overiding my network sessions. However, my engineer WAAS think that using WAAS would pose a problem.

  Question:

  At least once a week a user trying to ftp a large file by internet, which eventually cause saturation and performance issues. The internet is through the data center so evacuation qos is used.

  Internet - WAAS - router = MPLS = router - WAAS - customer

  Since there is no way to set entry in the form. And that would be not entirely help either. I need a session by session in the congestion management solution. So introduce WRED. Who's going to look like that.

  Internet---WAAS---Router===MPLS===Router--(wred)---WAAS---Client

  On the internal interface LAN's going to regulate the sessions of infiltration to the local network for the State of congestion.

  The problem for thought.

  Let's say that in a State of congestion THAT DAVID randomly deletes packages for reducing the size of the window of a ftp session through WAAS. How WAAS would meet abandonment random packages? These drops are going to the source of the packets to reduce or WAAS is she as a source? Specialty WAAS's performance, so it is supposed to compensate for the fall of packages. In this scenerio is WAAS the problem?

  If you are an expert in WAAS, I welcome your opinion.

  Hi Derek,.

  As you have known it WAAS technology runs on the TCP proxy feature by masking the real customers of WAN environment. Thus, any packet loss (whether because the WAN congestion or because of DAVID) will be handful of WAAS TFO (using BIC and BAG) and will not gas real customers.

  Also optimized thanks to the WAAS TFO feature automatically traffic supports the ECN of DAVID function also.

  I hope this information can help

• Is there an Adobe online service that allows to convert into a smart PDF format?

  My client needs to combine the files into a pdf file, but they cannot use Adobe Pro DC because they are a government agency and their PC is locked and they cannot load new applications on them. Survey Services PDF Adobe cloud looked like a good solution. However, some of the files that are needed to combine scanned documents and their scanner produces PDF files where each page is an image. In the service of PDF, it is possible to export these PDFs from word using OCR documents, but there is no option to select the output in a smart PDF format. They need the documents to be a true replica of the original, but also be index-able. They would pay for a subscription for a service that can convert to a smart PDF format, but is there an Adobe online service that allows to convert into a smart PDF format?

  Try to think about it as "OCR on a PDF by", not some kind of conversion. Who can help you locate a service such as Adobe do not have. Be aware that, if you find the clumsy bureaucracy to get the software installed, it can be insurmountable for a service online because of privacy. Protocols within governmental organizations are strict in order to keep all not controlled.

• Is there a way to re set Lightroom to the original settings, I've been playing with it and got somewhere that I don't know how to get out of... not particularly computer savvu

  Is there a way to re set Lightroom to the original settings, I was playing with it and has gotten, somewhere, I don't know how to get out of. Not very computer savvy

  For starters, stop Lightroom

  On Windows, do the following

  Click the Windows Start button and in the search box type: -.

  %AppData%\adobe\lightroom

  Then press Return\Enter

  This will take you to the folder Lightroom (see image below)

  Select the Preferences folder and click on delete to send it to the Recycle Bin.

  Close the Lightroom folder, and re-start the Lightroom program.

  

• AirPort Extreme - set time zone

  Greetings:

  I have seen a lot of traffic on the change of the parameter of time zone in an AirPort Extreme, but I can't find an answer.  It seems that it may be impossible.  There is debate if even a hard reset of the device clears the set time zone and allow it to be reset.  It also seems to be no access to the device to terminal implemented a manual correction.

  I left US mountain for the Eastern US time zone time zone.  I have an AirPort Extreme running firmware version 7.6.7 and use version 6.3.6 AirPort Utility.  My AirPort Extreme needs to operate in bridge, because of the way the Internet is provided by our service.  I use the 'access control Timed"to limit the time that my young children are able to access the Internet.

  It should be a simple matter to define the time zone of my AirPort Extreme to my current location (or so it should automatically and reliably).  I don't know if the bridge mode interferes with the ability of the device to find its time zone.

  Can anyone offer advice (other than to apply an offset from my control access timed two hours time difference)?  Can the Genius Bar at my local store to fix?

  Thank you in advance,

  WILX

  Unfortunately, Apple has removed a number of parameters that they feel that the users do not need. Setting the time is one of them.

  Finally, your airport will have the exact time, but it usually takes about 6 weeks for that to happen.  Until then, you will need to manually adjust the access delay settings to compensate for.  When the time of the correction is made, then you have to adjust again timed access.

  We have seen some reports from users who claim that resetting the airport to return to the default settings and then setting them up again will fix the issue of the time, but it has not always worked when I tried it.

  If the 'genius' can solve this problem quickly, then he won the title.

• set up a branch to the main ethernet using Airport Extreme network

  Could someone help me with this network configuration please?

  I rent an office and we have an ethernet cable coming into our building to the main network (a fiber broadband building next door). The ethernet line give you IP addresses and internet link.

  I would like to set up our own network in our building-

  1 / would put an Airport Extreme there is the ethernet cable and then plug the cable into the WAN port

  2 / I would implement the EA to distribute IP addresses, but using a different pool - so if the main building uses 192.168.1.1 to 192.168.1.256, I would be created my AE to use 10.1.1.1 to 10.1.1.256

  3 / I would then run an ethernet cable between the port LAN on EI to my Netgear 24 port switch.

  4 / I would connect all our other airport extreme and express again our Ethernet switch and put them all to 'bridge mode '. The switch ethernet cables may be connected to the WAN ports on these airports.

  Anyone see any problem here? We would just to have control over our own IP addresses and be able to restart our Airport Extreme, if we must, do not rely on the building next door to the distribution of intellectual property. I know still need to answer on them for the internet connection, but that's fine.

  Thank you!

  It should work. It would be the basis of a network of mobile type.

  A word of caution. With the exception of the "main" AirPort Extreme that performs as a router, connect the other base stations using their respective ports of LAN. We found some inconsistencies when a base station is in bridge mode and the connection is their WAN port.

• I have older Airport Extreme and Express but I now want to set up a new router Airport.

  I have an old Airport Extreme as my main hard wired (ethernet connected) router and an Express that I use as wifi Wireless extender.   Now, I want to set up a new Airport (probably Extreme) router and use the old Airport extreme as extender wifi hard wired (ethernet cable).

  I know that I have to reset the old default airport routers. But, how I do this and please start from there and the beginning, their reset and then up to the new Airport base station and then configure the older router to use with the new? Please be detailed, step by step and attach written instructions or places that I can get the instructions.

  What exact models are each of your airport base stations? Once we have this information, we can help you get your properly configured access point.