WAAS and quality of Service (Jacques)

Similar Questions

• Quality of Service with WRT610N and Vonage

  I try to get the quality of Service, in collaboration with my WRT610N and my Vonage device.  The WRT is connected directly to a cable modem, and the Vonage device is connected to the Ethernet 1 port.  I have configured the MAC address of the Vonage on the QoS tab as 'High' priority (done by selecting the 'voice device' on the drop-down list category).  In addition, I put my Vonage options (on the my account page of the Vonage site) to use the higher throughput (90 kbps, I think).  Any other setting QoS have been made.

  However, the router seems not to be the QoS application at all.  If I do any kind of surfing at all (dragging around on Google maps to load new pages of satellite is a good test), the quality of voice over a call during Vonage is very choppy.  What I have to do something else to make sure that the Vonage device gets highest priority?

  Follow these connection parameter:

  Modem (DSL/Cable)-> VONAGE-> WRT610N

  Your Modem must be connected to your VONAGE and your VONAGE Ethernet, plug it into the Internet Port of you router LINKSYS. You also check the VONAGE internet connection by connecting your PC to your Ethernet VONAGE before connecting the WRT610N router.

• Is there a quality of Service setting my Airport Extreme?

  I want to maximize my wifi by adjusting the parameters of quality of Service (QoS).  My son has an ASUS router that allowed him to QoS to prioritize devices it uses.  He moved then, video and streaming as top priority.  Can I do the same type of setting priorities with my Airport Extreme?

  Sorry, but none of the Apple routers provides this useful type of setting.

• QoS (Quality of Service) - Noob who has need of advice & help

  Hi all

  I did some research using Google, it is possible to use QoS to control bandwidth on wireless networks and wired.

  I use a router WRT54GS v1.1 that has this capability.

  I am wanting to control the bandwidth on my wireless so that my Ethernet (wired) becomes a priority of my internet connection.

  I activated the "Support WMM" option in the configuration of routers (Applications & Gaming).

  Explanations of the router are:

  "

  Two types of quality of Service features are available, Wired QoS controlling devices connected to the router with a cable Ethernet and Wireless QoS, who control the devices connected to the wireless router.

  Capture Wired QoS (qos.wqos)

  Capture (QoS.right2)Device Priority: you can specify the priority for all traffic from a device on your network by giving the device a device name, specifying priority and entering its MAC address.

  Capture (QoS.right3)Ethernet Port priority: you can control your data rate according to which physical LAN port, your unit is plugged. You can assign a low or high priority to devices on the LAN 1 port on 4 data traffic.

  Capture (QoS.right4)priority Application: you can control your data rate as the application that consumes bandwidth. Check Optimize the gaming Applications to automatically allow the application of common game ports to have a higher priority. You can customize up to eight applications by entering the port number they use.

  Capture (qos.wlqos) QoS wireless

  Capture (qos.right5) wireless QoS is also referred to as Wi-Fi (WMM) MultiMediaTM of the Wi - Fi alliance. Select activate to use WMM if you use other wireless devices that are also certified WMM.

  Capture (QoS.right6)without acknowledgement: select this option if you want to deactivate the acknowledgement. If this option is enabled, the router not re - sends data if an error occurs.

  "

  OK, now I understand everything what qouted above without any problems but feel there is lack of information.

  Exactly how does the QoS wireless? Need details of depth.

  that is, if I'm online games on my Wired node (PC in this case), who gets priority bandwidth above the node wireless (laptop - only surf the internet)?

  Thanks in advance,

  Peter

  Hi all, I got this working now. It was something to do with the following:

  Current firmware seems to have some bugs, but I will list those in another message

  -J' had to put the IP Address of the default router 192.168.1.1 that the definition of a caused different IP address wireless devices (laptop) does not connect to

  -Setting a different download speed that 'Auto' seems to cause the wireless devices do not connect

  Will post firmware problems in another post to alert anyone who needs to know in order to make the appropriate changes.

  Pete

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• Cannot install updates due to error code 0 x 80246008 and the BITS service is missing from the XP computer.

  Recently, I reloaded a fresh load XP on my laptop.  I was able to install SP3 and IE8, despite not being able to download them directly from the Windows Update site.  I tried several times to install updates, one, five and all at the same time and is unable to install.  I ran Fixit to many times and it says it solves some problems, but no single instance doesn't solve all of them.  I also tried to update after the launch of a clean boot, always to nothing does not.  I see many solutions on this and other Microsoft sites and I tried, but nothing seems to change the results.  FixIt has reported the following:

  -------------------------------------------------------------------------------------------------------------------------------------

  Details of the update of Windows editor

  Problems found
  Registration for the service is missing or corruptService registration is missing or damaged do not fixed
  Sign up for the service Reset Succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Check verrouillesfichiers missing or damaged missing or corrupt files fixed
  Repair missing or corrupt files Succeeded
   
  Windows Update, error 0x8024402C (2013-11-28-T-09_56_27A) 0x8024402C(2013-11-28-T-09_56_27A) of fixed Windows Update error
  Reset Windows Update of the data store Succeeded
   
  Verified issues
  Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
  Some security settings are missing or have been changedSome security settings are missing or changed Checked
  Key of registry corrupt Patch registry Patch keysCorrupt
  Detects the hotfix or corrupt cache Checked
  Windows Update services aren't runningWindows update services do not run checked
  Encryption services components are not the registeredCryptographic service components are not registered Checked

  Problems found details

  Registration for the service is missing or damaged do not fixed
   
  Sign up for the service Reset Succeeded
   
   
  Recent updates installation problems not fixed
   
  Fix Windows Update succeeded
   
   
  Recent updates installation problems not fixed
   
  Fix Windows Update succeeded

  Check missing or corrupt files fixed
   
  Repair missing or corrupt files Succeeded
   
   
  Windows Update error 0x8024402C(2013-11-28-T-09_56_27A) fixed
   
  Reset Windows Update of the data store Succeeded

  Issues checked the details of the detection

  6 environment variables Windows Update are incorrect Checked
   
  Restore the Windows Update environment variables is not running
   
   
  Some security settings are missing or changed Checked
   
  Reset the security settings is not running
   
   
  Key of registry corrupt Patch Checked
   
  Detects the cache fix corrupted or missing
  Fix registry patch not working
   
  Fix registry patch problems
   
  Windows Update services do not run checked
   
  Required for Windows Update registry files works not
   
   
  Encryption services components are not registered Checked
   
  Save the cryptographic components not working

  Details of detection

  The service status

  ---------------------------------------------------------------------------------------------------------------

  Can someone point me in the right direction to solve this problem?

  Thank you.

  Original title: Windows Update will not install on the new load XP

  Hi all

  Thanks for your replies.  Sorry I didn't answer sooner, but he got late last night, and I got to reregister the Qmgr.dll and Qmgrprxy.dll BITS files.

  I clicked Start, click on run and typed the command following, and then click OK:

  Start, run and in the run box, Type regsvr32 qmgr.dll, click OK.
  Start, run and in the run box, Type regsvr32 qmgrprxy.dll, click OK.

  I was then able to start the updates.  There are 124 updates, the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86.  He downloaded 124 updates, but even once asked me to insert the disc for qmgr.dll when he was installing the 10th update.  I find the qmgr.dll file again and pressed OK, but it seems to hang forever and do nothing, then I simply cancelled updates and closed during the night.  I have been relieved to have solved the problem of BITS, but is concerned by the hang up on the tenth update installation and he called again for the qmgr.dll file during the installation of updates.

  This morning, when I rebooted, it installed some updates at startup, and I restarted again.  He then held I first install the .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 to date.  N BITS issue for that.  It took time, but completed settle.  Restart again and now there are only 21 updates to high priority required.  My guess is that he downloaded all 124 updates last night, but when I cancelled the installation after hanging on #10, he just started to install it again this morning and did so successfully.

  However, when I try to install the 21 remaining, he has not once again, and I find that the BITS service is not in the services again.  After I have re-enter the BITS service and restart it, the downloads are working again.

  I am now what I may need to reinsert and restart the BITS service whenever I need to download an update.

  Ideas, suggestions or comments?  I am slowly solve problems and if I persist, I can get this all taken care.

  Hi Dan,.

  From what you wrote, I understand where you are getting confused. Here are the steps to follow to solve this problem.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  I hope they are all present, follow these steps to register the service.

  Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK
  (If you do not have the command run in the start menu, hit the Windows key + R, instead)

  Do the same with this file: regsvr32 qmgrprxy.dll and then restart.

  Here are the next steps.

  Copy / paste this command in the field to run, and then click OK
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  Windows will launch a dialog box asking you to insert the Windows installation CD. Ignore this and change the way downstairs to C:\WINDOWS\ServicePackFiles\i386

  The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.

  Then restart the PC again and continue with the rest of the troubleshooting steps.

  Click on start, run and copy/paste the following and click OK: services.msc

  You should now be able to see the Background Intelligent Transfer Service, or just "BITS" displayed in the list of Services.

  Double click it to open BITS and then click on the Start button. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Restart then try and start the BITS.

  If you get the same error again, copy / paste the following text in the field run and click OK:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then try and start the BITS.

  Let me know how you please.

• How can I obtain and load the service pack 2 for my sony vaio 2000

  How can I obtain and load the service pack 2 for my Sony Vaio 2000 (model year) that I need it to have

  installation of some software.

  Rex

  I suggest to download the full Windows XP Service Pack 3 (not 2) and copy to a CD for future use, here http://www.microsoft.com/download/en/details.aspx?id=24

• No sound - "either Windows Audio and Windows Audio services end Point Builder is not running."

  original title: no sound - Fix he said "either Windows Audio and Windows Audio services end Point Builder is not running."  What should do?

  When I ran Microsoft Fix it for audio, it says that it is unable to solve the problem.  The message was "two windows audio and Windows Audio end Point generator services must run for audio works correctly." At least one of these services is not running. "What should I do now?

  Content in double wire-
  "When I try to use anything related audioi on my computer (volume of the speaker, open iTunes, watch a video), a box appears that reads,"c\Windows\System32\MMDevApi.dll is not designed to run on Windows or it contains an error. " Try to install the program by using the original installation media or contact your system administrator or support software provider. "The mystery is that I have nothing to my computer to ask for that. I have not installed anything new or change the settings. It just started happening. Any advice? »

  Hello

  1. are you able to hear the sound after the error message?

  2. you have an an external sound card or internal, installed on the computer?

  Method 1:

  I suggest you to follow the steps and check.

  (a) click Start

  (b) type services.msc in the search box, and then press enter.

  (c) scroll down to Windows Audio and Windows Audio endpoint builder of Point

  (d) both should be started and set to automatic if one or both are arrested.

  (e) click the name to select it.

  (f) click on restart the service at the top left.

  (g) repeat for both if necessary. If some are not set to automatic, and then double-click the name and on the drop-down list to set the startup type to automatic and apply and ok your way out.

  Method 2:

  I suggest you to run the automated FIXIT from the link below. You can also follow the other steps and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 3:

  If you have a sound card, I suggest you uninstall the audio driver from the Device Manager and and then install the latest audio driver version from the sound card manufacturer's website.

  To uninstall the Device Manager sound, proceed as described in the link below.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Find the audio driver in the list, do a right click and Uninstall.

  You can also download the drivers from the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:

  If the steps do not help, I also suggest you to run a scan of the System File Checker .

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Hope this helps and keep us posted.

• Reference Dell recycling and Asset Recovery Services

  How will I be able to participate in the recycling program Dell and Asset Recovery Service?

  Hi Palmetto-ITC,

  Thanks for posting.  Here is the information on the Dell recycling program:

  http://www.Dell.com/learn/us/en/ID/Dell-environment-recycling

  Kind regards
  Robert

• Get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed).

  Original title: necessary emergency aid

  Windows lost completely. After trying a variety of things, I finally got one to start, but my entire system had returned back to the year 2012.

  After updating my anti-virus and other security programs, I tried to check the updates of Windows, but I get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed). You run the Windows Update Troubleshooting Wizard and he said that he had set things so I rebooted to try check update again. However, I get the same message.  There is nothing showing at all when I click "update history", but check "updates installed" shows things are fine until 2012.

  Please, how can I get my system again right?

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• I don't know how to change the size and quality of the text on the screen on Windows 7

  I just installed a new Windows 7 but I don't know how to change the size and quality of the text on the screen.  I tried all the things normal, resolution, size of icons, dpi etc but nothing gives me what I want.  The text in clear 'wonderful' thing is just terrible.  When I go through the 4 steps I see no text boxes which make the text nothing better.  All options are terrible, so the result on screen is too terrible.  When I do any huge I do not get a full screen of things - view the Start button disappears or I did not closing small cross at the top - of the suggestions to inprove the situation?  I must mention that my screen/monitor is 2006 - I need to buy a new one?  How much is this Windows 7 is going to cost me, or maybe I should go back to XP!

  I sincerely thank all you smart "technicians" for all the answers you always gave myself and all others who ask questions.  I'm not too smart with all this new technology as I fell into it very late.  I am now in my 60s and only started using a pc when I was over 50 years so...  In any case, I asked a question about the size of screen resolution and text and received much good advice from all that you guys.  I had recently changed in XP to Windows 7.  However, the bit of advice that I was given in 'Cyberking' here at the Portugal had set the resolution of the screen, the advanced settings, 75 to 60 Hertz Monitor tab.  Very basic, and the first question asked the technician (Lady) was "what size is your screen?  Naturally as a smaller screen that any 'techno' would be considered dead aid, solving the problem was simple and straightforward without me having to stretch my knowledge and my skills by downloading all programes weird (to me) or do the funny stuff in the bios or something else.  I send this comment to you for you to realize that the simple solution is not always bad and maybe we should go for the easiest first and then work up to the more difficult ones.

  Just for you all to see - now my screen resolution is perfect, the text on the screen is clear and legible without difficulty, even though the size of text and icon is small.  Clarity is all!

  Thank you all once again!   Best regards, Blondie blue.

• BlackBerry Smartphones BB App world and additive of service payment BB... stuck in a loop

  Hello

  I have a blackberry id. Seems to work very well. BB App world installed on my latest version of phone.

  When I click on "I agree" the dialog box disappears, but when I click on my new world «The BB App world» and BB payment service additive... "dialog box is displayed again.

  Help, please

  Thank you

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • KB24200 Screen loops when BlackBerry ID or PayPal authentication is verified in BlackBerry App World storefront on the BlackBerry smartphone

  I hope that it contains something useful! There are also several existing threads on this site, which discuss that exact error... your opinion of those who may prove useful, and a search of this site, by using the code, or an error message should reveal all the existing threads that are applicable to you.

  Good luck and let us know!

• What is no-WINS node? Does this mean he does not broadcast server service and the WINS service to resolve a name to intellectual property?

  What is no-WINS node? Does this mean he does not broadcast server service and the WINS service to resolve a name to intellectual property?

  Hi Adam,.

  essentially servers (nodes) Wins, run a program that turns the words we type in on Internet:

  (ESPN.com) in the actual physical address of ESPN.com servers.

  So no Wins use only the real 119.97.555.34 (not a real address) instead of ESPN.com words

  B Eddie

• continue to beat to the song and it says service foresees to fail?

  I can't open any song I have in my laptop, but I can listen to music online on internet only!... what should I do to fix this?

  Hello

  1 have had any changes made on the computer before the show?

  2. what player do you use to play music?

  3. the problem occurs all by playing songs in Windows media Player?

  4. What is the file format of the song you're trying to play?

  In case you have a problem with Windows media Player, then try the following steps.

  Method 1:

  Run the troubleshooter in Windows Media Player.

  Open the troubleshooting Windows Media Player settings Troubleshooter http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Restart the Windows Media Player Network Sharing Service and check.

  a. click Start and then type Services.msc in the start search box and press ENTER.

  (b) in the Services window, search for Windows Media Player Network Sharing Service.

  c. right-click on it and then click Properties.

  d. Start the service, then press ok.

  Check if you are able to play the music.

  Answer us with more information about the issue.

• This is where other issues of quality and quality Plans are grown?

  This is where other issues of quality and quality Plans are grown?

  Ben

  As the quality is part of discrete manufacturing module that seems logical, but you might also find some useful discussion for the purchase or manufacturing process.

  JS.