Is there that any VMWare based virtual solution for EMC storage systems?

Similar Questions

• is that any limits the current entry for the digital I/o?

  Hi all

  I wonder if there is no limit on the input to the digital I/o port. I have a device about 0.2 volt voltage outputing and the manual says the maximum sink current is 25mA. I connect this signal to a DI entry in my 6711 map. I wonder if the current is too large for the entrance of DI or the PFI?

  As we have already mentioned, there is no current flowing on the device in low level mode.

  The current specifications mentioned see the maximum current that can be managed by the device in low level mode.

  I hope not to confuse you more than necessary. On a row of data to the TTL level, nothing flowing from the device to the main circuit in level mode high current. In low mode, there is flowing in the main circuit in the current device. This current is inherently limited by the circuit.

  So, if you have a file specification of 25mA max. of the peripheral device in low level mode, it will never sink too much power from the main circuit. You can connect two devices without any risk. The maximum current is just specified in case you manage more current with the device, a led or a relay for example. In this case, the charge current must be limited, so that you do not damage the device. But - as mentioned - this is NOT the case in your application.

• Questions about replication of virtual machines using EMC storage

  Hello

  If we have a configuration on 5200 VNX and ready to replicate to Dominican Republic

  What are EMC replication Solutions, if not use Recoverpoint?
  I have to add licenses of replication with the Suites of the app for that?

  and whether using Recoverpoint, it is essential to use SRM for replication can be configured using Recoverpoint and VNX licenses only?

  and for another program installation is with 10 GB iscsi ports, what are the possible solutions?

  Thank you
  
  

  There are several choices for replication with EMC VNX. You can use Mirrorview. MirrorView/S (synchronous) is for short distances and Mirrorview/A (asynchronous) for longer distances and time of higher latency and low latency. You will need a license from EMC Recoverpoint or Mirrorview. Recoverpoint appliances can now be virtual with version 4. ISCSI is required for a virtual Recoverpoint deployment.

  You don't have to use RS with Recoverpoint, although I would recommend that you do. SRM automates many manual steps that are necessary to retrieve your VMs. SRM will be integrated with Recoverpoint or Mirrowview and you will be able to script recovery plans. In the case of the manual recovery plans would be required and will need to be updated.

  You can also duplicate with suppliers other than EMC software. VMware has built the replication that is fine. Veeam also sells software for replication.

  John

• I can't remove the box that says videos titled: Adobe Reader for Local storage settings

  Whenever a video show on the screen as a box appears in the middle of the video, saying:

  Adobe Flash Player settings

  Local storage

  He says that a web site asks permission to store information on my computer

  At the bottom are choices: a folder can refuse

  When I click on denies it does not alter the box, therefore, I'm not able to view the video.

  I tried to change the Flash Player, but it gives a message that Adobe will be removed from my computer.

  That's where I stop.

  I replied to the other thread you started.  I'm locking this one.

• W510 - Security Solution for the Client ThinkVantage®

  Will there be the ThinkVantage® Client Security Solution for W510? I know that the W500 series has the client security solution. The W510 will have this?

  ThinkVantage client security is good Manager password, advanced security and animals. A must have but for Thinkpad user. I use password with firefox fair Manager.

  Solution!

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-73696

  Works perfectly!

• I want to know the requirements that must be given to the team of storage before you create a lun

  I want to know the requirements that must be given to the team of storage before asking a LUN

  Generally the responsibility of a team of storage is to provide space for guests and make sure they can meet the space and I/O requirements. creating a virtual machine is usually done by the administration of VMware.

  Basic information the storage team is the needs of WWN (in the case of FC storage) or IP addresses and s iqn (in the case of iSCSI) to set up the hosts. In addition to this the high need know that it is a VMware environment. According to the storage systems, hosts must be defined with the appropriate operating system that uses the LUN. Once the hosts are configured, all you have to do is to tell the storage team what LUN size you need, who is hosting the LUN must be submitted and probably the input/output expected for the VM running on this LUN, so that they can make the decision for example RAID levels a hierarchy...

  André

• VMware-view-open-client for windows

  Hello

  Anyone know why there is no vmware-view-open-client for windows?

  http://code.Google.com/p/VMware-view-open-client/

  Laughing out loud

  The windows version includes PCoIP that isn't Open source.

• My pdf files that I am editing keeps "freezing" and I have to use the Task Manager to end the program. I have the latest version of Adobe Acrobat Reader DC and I have 10 windows? Is there any solution for this?

  My pdf files that I am editing keeps "freezing" and I have to use the Task Manager to end the program. I have the latest version of Adobe Acrobat Reader DC and I have 10 windows? Is there any solution for this?

  Hi gregs5153218,

  You can't the PDF files to be changed with Acrobat Reader DC.

  You must have the Acrobat application to edit PDF files using Acrobat. Edit PDF files.

  Kind regards
  Nicos

• My google search bar now lights up blue and I don't see what I'm typing. Why? I read somewhere that there is a problem with Firefox. Is there any solution for this?

  I don't know exactly when it happened, but one day my search bar Google turned blue when I tried to kick it. I couldn't see what I was typing. I did some research and some forums that it was a problem with Firefox. Have you heard of this? Is there a solution for this?

  Thank you for your help.

  Which may be caused by protection of typing"Comcast constant guard.
  
  'Configure the Anti-keylogger settings'-> disable

  • [874709/questions/874709]
  • [870165/questions/870165]

• Siri does'nt hear me. Is there any solution for this?

  Since installing ios on iPhone 9.2 6 siri does not hear what I'm saying. Is there any solution for this?

  Hello Sergeant Hutton,

  I understand that Siri doesn't seem to be accepting an entry once activated. Fortunately the steps below can help to restore the full functionality of Siri on your iPhone.

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled under settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
  6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
  7. Contact Apple support.

  Use Siri on your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT204389

  See you soon!

• I've got qcad Professional installed but vista will not open save dxf files. I get dxf is not an application valid win 32. Is there any solution for this?

  I've got qcad Professional installed, but vista will not open save dxf files I get a file... dxf is not an application valid win 32.
  Is this a common problem?
  Is there any solution for this?

  You, of course, took umbrage to my last post. For that I apologize, there was no pejorative intention. I am a newbie in the forums and am digging my way along. I have marked your answers answers by mistake, I'll try to fix this.
  I solved the problem, I tried to open files in the Qcad application by clicking on the list of recently used files. It will not work in a new session.
  The correct procedure is:-
  Open click, Qcad - click file - open (this opens the index page of Qcad from the saved files) - click the required file - click Open.
  There is no problem, with the exception of this incompetence of users.
  Thank you for your time and assistance.

• Attach a Nikon D750 in LR 5.7. Is there any solution for this?

  I LT CC and I have no problem with my Nikon D750 of attachment. My girlfriend has however LR 5.7 and it cannot tie his D750. Is there any solution for this?

  Sorry, the answer is simpler, I realized.  Tethering for the D750 has not been added to the LR in version 6.0.  That's all.

  See this list: a list of cameras that can be attached to Lightroom.

• I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  You have a corrupted user agent which identifies you like Firefox/3.0.11

  • Mozilla/5.0 (Windows; U; Windows NT 6.1; UK; RV:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 WebMoney Advisor

  See:

  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• Hi, I wonder if there are any Adobe plan that includes Ps, Lr, Id and AI

  Hi, I wonder if there are any Adobe plan that includes Ps, Lr, Id and AI

  Hello

  There is no subscription that allows you to use PS, lr, id and have only.

  You can buy the plan of photography that allows you to use PS/lr and add IS and the AI as a single application.

  Otherwise buy the full creative cloud composition.

  You can refer it please:-Creative Cloud price and membership plans | Adobe Creative Cloud

• I can no longer open PDFs with Acrobat Pro XI.  I can only open it with Adobe Reader.  Is there any solution for this?

  I can longer open PDFs with Adobe Acrobat Pro XI.  I can only open it with Adobe Reader.  Is there any solution for this?

  Hi Steven,

  Right-click in the PDF file, go to 'Open with' & choose "Adobe Acrobat XI".

  

  Let me know if the file opens in Adobe Acrobat XI or not.

  Also, I would like to know if there is an error.

  Kind regards

  Nicos