W510 - Security Solution for the Client ThinkVantage®

Similar Questions

• HP EliteBook 2760p: security for the Client software HP will not install on Windows 10 Version 1511

  I got the HP Client Security software installed and running under microsoft Windows 10. It will install is no longer under Windows Version 1511 10.

  - Or nearby - 17 November Microsoft has released an update to Windows 10 Version 1511.
  The Windows Update process necessary to uninstall the security software for the HP customer as it has been marked as incompatible.

  Before you uninstall, I've upgraded to version VERSION: 8.3.16.2035 (SP72998.exe). The installation under this version of Windows 10 properly filled.

  I have re-directed the Windows Update process and it beating Pavilion HP Client Security Software as incompatible and need it be uninstalled before the update of Windows 10 Version 1511.

  I uninstalled the HP Client Security software, upgrade to Windows 10 Version 1511. When reinstalling SP72998.exe, after you open a powershell window, the installation fails with the message "error 1722" There is a problem with this Windows Installer Package... Action PinShortcut.9EA0... "Location: c:\users\"username removed"\AppData\local\...\DPClientCOnsole.exe.

  A quick capture of window powershell before she disappears reveals a similar error: 'verb Pin to taskbar not found. "

  It seems that something in the Setup program tries to pin to the taskbar is a failure. A quick google search seems to indicate that the interface script to pin has been removed in Windows 10.

  I tried to install the update with Windows 8 compatibility, run as administrator, clean boot Windows. The same error each time.

  An installer updated that works with Windows 10 Version 1511 or a workaround would be greatly appreciated so I can regain the use of software security tools for the HP customer as a login by fingerprint reader.

  Workaround in this post worked perfectly with Windows Version 1511 10 and HP Client Security Software VERSION: 8.3.16.2035 (SP72998.exe).

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• Security Service for the family

  How to enable the security service for the family that has been accidentally disabled on windows 7 computer?

  Hi juanmed2584,

  Did you mean that your accidentally disable the filter of parental controls on the computer? If so, you can simply activate the filter by following the steps below:

  1. start Windows Family Safety.

  2 connect to the parent account credentials if prompted.

  3. click on Activate parental control filter under user account from the child.

  4. Enter the parent account password.

  If you have any other questions, please let us know.

  Thank you!

• Does anyone have a solution for the use of Bible Illustrator 3.0 MS8 and MS7

  Original title: program programs Application Applications compatibility.

  Does anyone have a solution for the use of Bible Illustrator 3.0 MS8 and MS7

  What are the requirements of system for this program?

  What version of Windows it says on the package, it was designed for?

  If its designed for an earlier version of Windows such as Windows 95 or Windows 98 or XP, then it is probably incompatible with Windows 8.

  If the product packaging indicates anything in the 1990s OR early 2000s, I am afraid that this is not something that is guaranteed to work with Windows 8.

  You can try the following average time.

  Point to the installation files where they are.

  Right-click on the configuration file, and then click "troubleshoot compatibility".

  Wait, it detects the problem.

  Click on the option "worked in an earlier version of Windows.

  Select Windows 7 RTM or better Windows Vista SP2

  Click next

  Click Start the program, wait, it installs

  When the installation is complete, click Finish and save the settings.

• Cannot synchronize windows security 8 for the family with Web site

  I already have a security account for the family windows on pc windows 7 of my son.  We just got him a windows Tablet 8 for school and I want to add this device to his account with the same settings.  I went through the installation on windows 8 (creation of a local child account for him, which allows security for the family for the account).  When I hit the button to manage the settings on the family safety website, it tells me that the service is not available.  My Internet as fine (since I'm on this site), so I doubt that it is a temporary problem.  On the family safety website, it shows its Windows 7 PC, but not the tablet of windows 8.  Someone has ideas of how do I synchronize the security settings for the windows family 8 with the site?

  Hi Mike,.

  Do you get the error message when you press the button "manage settings on the family safety Web site?

  You can check the status of the safety of the family here: https://status.live.com/detail/fss

  It is possible that your Microsoft Account needs a form of additional verification.

  Follow these steps:

  1 1 glisser slide from the right side of the screen, then select settings

  2. Select change PC settings.

  3. Select accounts

  4. Select your account

  Now, you can see some indications that your account or the machine needs additional checks. If you could click on the link and follow the instructions provided, this might solve your problem.

  Once you are done, follow these steps:

  1. go in other accounts (under accounts where you were previously).

  2. Select the account you want to have a child, and then click change

  3. change the account to a child account, then select OK.

  To ensure that you are connected to the parental control service, follow these steps:

  1. press on the button of the window on your keyboard

  2. tap parental controls and select parental control

  3. press on the large enough to Manage settings on the Family Safety website button.

  4. you should see a list of people who can manage these settings online.

  Let us know the result. If you have any other questions, we will be happy to help you.

• Solution for the mutation of table of error when using triggers

  Hello

  Could you please give the solution for the error table mutation during the use of triggers. I'll give you the simple scenario here,

  I created a trigger on the employees table, whenever all DML operations takes place in the employees table, it must run the trigger body. I intentionally used also of the employees in the body of the trigger table. Please give me the solution.

  Triggering factor:

  create or replace trigger test_trigger

  before you insert or update or delete employees

  for each line

  declare

  an employees.first_name%type;

  Start

  Select first_name from people where job_id = "AD_PRES";

  end;

  DML statement:

  Update employees set salary = 20000 where job_id = "AD_PRES" (I run this query)

  Error message:

  ORA-04091: table HR. Is the transfer of EMPLOYEES, the function of triggering/can not see

  ORA-06512: at "HR. TEST_TRIGGER', line 4

  ORA-04088: error during execution of trigger ' HR. TEST_TRIGGER'

  Can anyone tell, in what other scenarios, we get this error or recursive table mutation?

  Thanks in advance

  Hello

  When you create a trigger on a table, you cannot edit/query this table the trigger is not completed.

  You can use

  (1) transaction of Pragma autonomous

  (2) instead of row-level trigger, you have statement-level trigger

  (3) to 11 g, try with COMPOSITE trigger

  Try below to avoid it (a solution):

  create or replace trigger test_trigger

  before you insert or update or delete employees

  for each line

  declare

  PRAGMA AUTONOMOUS_TRANSACTION;

  an employees.first_name%type;

  Start

  Select first_name from people where job_id = "AD_PRES";

  COMMIT;

  end;

• We have creative cloud for business our creative cloud for the client company cannot access the plan portfolio Typekit fonts

  We have Creative Cloud for businesses.

  Our creative cloud for the client company (= users) cannot access the Typekit portfolio plan, only the free fonts.

  Best regards

  Matti Makijarvi

  [email protected]

  We had it operating forest offf CC and Typekit user accounts, delete this user of dashboard, creating a new email account for the user, inviting through this e-mail as a new user.

  Now, she has access to the Typekit PF regime.

  /Matti

• Security filters for the Types of Plan of ASO in 11.1.2.3

  
  All,

  My understanding of security filters for the Types of Plan of ASO in 11.1.2.3, is that they are not as robust as Types of Plan of traditional BSO are. Is this true? If so, can I restrict access to users who are assigned to the ASO Plan Type to display only and read/write on the private accounts and entities (for example)?

  Thanks in advance.

  The limitation that you refer is a bit confusing.  In summary, the planning will not create Essbase security filters on a data base of the ASO.  However, this does NOT mean that you will not have security on the Type of Plan of ASO.  Instead, it depends on which tool you are using to access the Type of Plan of ASO.

  If you want to connect to the ASO Plan type planning or tool (e.g., EN) with a connection to planning, you'll be fine.  The planning gets its security filters Essbase security information.  It gets its information from the relational repository security.  So the planning and the EN (with a connection to planning) are supported.  Security works as you would expect, even for the Type of Plan of ASO.

  If you want to connect on the type of Plan of ASO with something that requires a * Essbase * (not planning) connection, it only is not supported out-of-the-box, because planning will not create filters on the ASO cube (at least not yet in this version).  However, there is nothing that prevents you from creating filters on your own.  I usually manage all of my safety in an Excel/VBA model that allows me to export/import the Essbase security planning and.  This allows me to apply specific to Essbase filters after a refresh (by importing the custom filters via MaxL).

  So the question is... what tool you will use to access the Type of Plan of ASO?  If you use a connection of planning, you're good.  If you use a connection of Essbase, should be a personalized approach.

  Hope this helps,

  -Jake

• EQG-31209: no attribute security defined for the source of HIS

  I try to configure ITS for OBIEE 11.1.1.7, I followed the oracle document clearly and I configured the oracle document system. so I am facing the below error so please help me for this problem.

  is it necessary to have the web content Center Oracle 11 g?

  (1.) where I can fix the "EQG-31209: no attribute security defined for the source?

  (2.) where I can fix "EQG-30249: crawler process abandoned. '?

  EQG-31209: no attribute security defined for the source (id = 21)

  at oracle.search.crawler.WebCrawler.init(WebCrawler.java:631)

  at ImtCrawler.run (ImtCrawler.java:1954)

  at ImtCrawler.main (ImtCrawler.java:534)

  13:05:47:984 EQG-30249 main ERROR: process of Crawler abandoned.

  Thank you.

  Hi Corinne,.

  I have fixed the problem. It's just a little configuration problem. What is the error code you face?

• I searched for a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.

• When Client Security Solution for T61 running on Windows 7 comes out?

  Now I clean Windows 7 Professional 64 - bit installed on my computer. Whatever it is work very well except for Client Security Solution, that I can not install. Someone who knows when it's released?

  Added: also, Director of presentation for Windows Vista does not work on Windows 7 too. When it comes out?

  Thank you very much!

  V8.3 CSS: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73696

• Security reports for the family

  Since then, buying a new computer and transmitting the data transferred, I received security for the weekly family reports saying that there is 'no activity' but I know that my kids use the internet... I have to sign.  How can I get the reports is accurate again?

  Hi Loripiano88,

  Because you bought a new computer, it is possible that parental control is not recognize it even if you have the data transferred from your old computer.

  First of all, please upgrade to the latest version Family Safety, you can download it here. After you have installed the latest version, please follow these steps to ensure that parental control is set to the new computer:

  1. connect to http://familysafety.microsoft.com using the parent account.

  2. click on Manage list of the members of the family.

  3. Select the child's account and then click Remove. Click delete to confirm.

  4. open the client of parental controls on your computer.

  5. on the upper right side of the parental control window, click the icon to get the latest settings from the Web site .

  6. after a few seconds, it displays a dialog box saying that there is no accounts on your computer. Click set up the Family Safety. If the dialog box has not shown, just, close the client and reopen it.

  7. connect again to Family Safety using the parent account.

  8. follow the on-screen instructions to set up parental controls.

  9. return to the Family Safety website. Activate the activity tracking and change other settings according to your preference.

  10. open again the parental control client, and then click the icon to get the latest settings from the Web site on more time.

  Thank you!

• E3200 needs reboot once a day - time for the client lease problem?

  It's annoying - I need to reboort my router every day to get an internet connection? I have a desktop computer and a laptop more iPads, etc. The laptop loses connectivity every day around the same time. So far, my only solution is to reboot the router. I realize that the client lease time is set to 1 day by default, but it is not supposed to ask the modem for another day of life, when this happens?

  I bought Linksys because of quality, but it's frustrating!

  Can anyone provide a recommendation?

  Thank you!

  Well, you are on a cable or DSL connection? I don't know that I'll just move forward and try to determine some tips for your router settings:

  1. you use E3200 which is a double router broadband. So I think you'll find these settings:

  

  I change the setting like QUACK says:

  For the 5 GHz channel parameters, you can do channel width to 20 MHz only and channel 40 or 161...

  For 2.4 GHz string parameters, you can make the channel width to channel 6, 9, 11 and 20 MHz only...

  Your iPad will only see the 2.4 GHz so that they connect to. If your laptop can see the two strips, they connect to any broadcast signal is the strongest. If you are interested in reading about the difference between 2.4 and 5 GHz, you can read it here.

  Can also apply you all the settings you change on the E3200 router your Wireless extender? It is important for computers/devices that are connected to your Extender gets the connection. The Wireless Extender usually extends the 2.4 GHz signal.

  Sorry for long post.

  Just tell me if this doesn't work, I'll try to think more help

• scalable design vcs-e for the clients of MPLS and internet

  Hi all

  I think of an evolutionary design of VCS-highway in a service provider architecture.

  Some clients reach vcs-e across one MPLS network, another customer over the internet (each client with its own vcs - c).

  I have a vcs-e with dual NICs and nat enabled.

  VCS - e is a private network.

  In this architecture, if I nat vcs-e in one public ip address, I can't inject the public IP address in the VPN client (clients use the address private, and anyway, they will not receive a public IP, MPLS and the internet). And I can't inject a private Internet ip address. In addition, every customer wants to use an ip address of vcs - e compatible with their plan ip... then maybe customer wants to use an address of 172.31.x.y and a B client an IP address of 192.168.x.y.

  Best solution would be to nat vcs-e address in different ip address for each client / internet through the firewall, for example vcs-e 10.1.1.1 in 172.31.24.1 for the customer has, in 192.168.24.1 for client B and 80.x.y.z for the internet, according to the firewall context... but I'm not sure that I can do (I can? I think I can only the ip address of nat vcs-e statically 1 to 1).

  I am attaching a figure illustrating the design of the network.

  Any suggestion?

  Hello

  In your design, it is allowed to do NAT between VCS - C and VCS-E if you configure using links/box of course, which I think is what you plan to do. A nearby area will fail in this design.

  If your customer can have a VCS - C on their private network and that you connect to your VCS-E through a NAT firewall as you describe as the "best solution".  There is no need to NAT any return to the client IP address, since the VCS - C will make an outbound connection only for the VCS-E.

  Robert