iSCSI target shows no not in devices

Similar Questions

• Portege R830 - external HARD disk error - "target not found device.

  Hi all

  I recently bought a 1HD R830 which has windows 7 as its OS.
  I have a few old external hard disks that were formatted on windows vista.

  When I try to use it on my new computer it says "target not found device.
  I called support for the external hardrive, who said this is an incompatibility problem and that I would need to re format external hard drives (and therefore lose all about them unless I copied them on a compatible hard drive).
  Is this true?

  Rather than go through the hassle to copy all data to another hard drive is there a way to make my new computer compatible with the external hard drive?

  Your help is very appreciated.

  See you soon,.

  Jason

  I have an old drive external HARD with images recorded on it and I use it for years with WXP, Vista, Win7 and now with Win8 too. There is no problem at all so I put t understand what could be wrong with your HARD drive.

  Do you have similar problems with other external devices connected to your laptop Portege?

• HP 8600 Pro Premium: 8600 Pro Premium connected to the cable network shows as not connected on the list of devices

  My printer/Premium Pro 8600 is wire connected to my network and works very well (exception below) but shows as not connected on the list of devices on my desktop computer Win 10.  What gives?  Private network.

  I also can not connect to my laptop which is connected wireless to the network.

  Hello and welcome to the community of HP @Pickles2011,

  I understand that you are having problems with your HP Officejet Pro 8600 Premium connection. I'll be happy to help you.

  Here are some links to documents that provide solutions for troubleshooting connection problems. Try the steps and let me know the results.

  HP printers - Printer not found during setup of the network (Windows) driver

  Wireless printing Center - Troubleshooting

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Could not see the iSCSI target in the adapters iSCSI software under Configuration details page

  Detailed description:

  After you add the IP address of the iSCSI target in the target iSCSI dynamic discovery Tab names can be seen under static discovery. But, iSCSI target is not considered as adapters iSCSI software tab Configuration details page.

  This iSCSi target is already mounted as a data store VMFS5 with some VMS on an another ESX which is part of the different ESX cluster in the same center of work data.

  thinking the im network configuration

  You vm kernel ports configured correctly?

  you use VLAN? If so see if your config of vlan is correct

• Why do VPPS apps show as not not transferable device when buying as Distribution managed?

  Hey people,

  I am using Meraki MDM and have been for some time.  It's the free version, but not the legacy version, the license has been upgraded.  I bought about 70 applications through VPP, many of them being free applications.  As with all free apps purchased via VPP, they were purchased as Distribution managed, which is what I want for the assignment of device to iOS 9.2.1 iPad air.  All purchased applications, with the exception of 3, were sent to the required devices without any problem.  There are 3 applications that have still not been sent on other equipment.  Here are media monkey, our history for the iPad and the App of poetry.

  I have no idea why these applications cannot be postponed to the devices, with the exception of the fact that the developer has not activated device allocation for these applications.  Anyone know if this is the case, or if there is no other reason?

  I've been with MDM iPads since iOS configuration 6, so I am very familiar with the process.  In addition, apps that have properly been eliminated, have the same settings applied in Meraki MDM.

  Any thoughts would be appreciated.

  Kind regards.

  Well, I just thought about it.  In the VPP store, when you are going to purchase history, and then click the app in question, when you are on the page for this application, you can scroll down and on the left side, since where it says 'See in iTunes' in a blue box, you will see whether or not it is said 'Programmable device'.  Bingo.  So, even if you can buy the apps like managed distribution, it does not necessarily mean that they can be assigned to the device.

• Need urgent help: loss of storage after rename of iSCSI target

  Hello guys,.

  I need help, I had the problem with one of my iSCSI targets with all virtual machines on it, this iSCSI target on the storage iomega NAS device, is suddenly the storage is no longer available, I tried to rename the 'VmwareStorage' to 'VmwareStorage1' iSCSI target, but his is more appropriate (his was visible on a vsphere servers) but now visible sound like a DOS partition, please help to recover to vsphere without losing any data and the virtual machines inside. Note that I use Vsphere 5.5. see attached photo:

  the selected one is 16-bit DOS > = 32 M, its must be VMFS, as all other stores, I don't want to not loose my vms, the company stops and I'm fired

  

  I fixed it... I followed this vmware kb

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2046610

  Thank you vmware, linux thanks<>

  

  

• Removed VMFS3 iSCSI target volume - I'm screwed?

  Hello. I "tried" to move virtual machines between servers and the San. On a single server, ESXi 3.5, I 'got' a VMFS volume on a target iSCSI on a basic SAN device.

  The volume "was" listed in the configuration of the server/storage tab. I removed thinking it would be just to delete the reference to the volume from the point of view of the host, but he seems to have deleted the iSCSI target volume.

  Is this correct - is my missing volume? If I'm screwed? Is there anyway to recover the volume?

  Any help or advice would be really appreciated. Thanks in advance.

  We must thank Edward Haletky, not me

  In the VMware communities, his nickname is Texiwill.

  André

• Multiple ISCSI targets and connection failed

  last week I was preparing my s/w iscsi initiator to connect to multiple iscsi targets.  I ended up not doing last week, and I thought that I removed the targets of the GUI.  looking now @ the GUI, I only show my main production target, but if I look in my Journal vmkernel, his constantly trying to connect to these targets, I had the plan on connecting the box to.  Anyone know of a way for me to look @ the console and see where they can still be defined, of cause, they are not displayed in the GUI.

  See part 3 of this post "The case of stale iSCSI LUN.

  http://apps.sourceforge.NET/MediaWiki/iscsitarget/index.php?title=The_case_of_stale_iSCSI_LUNs

• Update ISCSI 4 - Microsoft ISCSI Target 3.0

  # vmkiscsi-tool-l-T vmhba32

  -

  ---

  NAME: iqn.1991 - 05.com.microsoft:nas3 - esxvmfs-target

  ALIAS                             :

  INDICATORS OF DISCOVERY METHOD: 0

  SEND THE DISCOVERY OF DEFINABLE TARGET: 0

  SEND THE DISCOVERY OF ACTIVE TARGETS: 0

  0 Portal: 172.17.0.136:3260

  -

  ---

  -

  ---

  NAME: iqn.1991 - 05.com.microsoft:nas3 - esxvmfs-target

  ALIAS                             :

  INDICATORS OF DISCOVERY METHOD: 0

  SEND THE DISCOVERY OF DEFINABLE TARGET: 0

  SEND THE DISCOVERY OF ACTIVE TARGETS: 0

  0 Portal: 172.17.0.136:3260

  -

  ---

  # ls.. / VMFS/Devices/Disks

  vmhba0:0:0:0 vmhba0:0:0:2 vmhba0:0:0:4 vmhba0:0:0:6 vmhba0:0:0:8

  vmhba0:0:0:1 vmhba0:0:0:3 vmhba0:0:0:5 vmhba0:0:0:7

  #

  I've got netstat the NAS and its there on port 3260.

  I have 2 network cards on the Server NAS.135 et.136

  I have an another esx with 3.5 123630 and I'm able to see it without problem.

  # cd... / VMFS/Devices/Disks

  # ls

  vmhba0:0:0:0 vmhba0:0:0:8

  vmhba0:0:0:1 vmhba0:0:0:9

  vmhba0:0:0:10 vmhba0:1:0:0

  vmhba0:0:0:11 vmhba0:1:0:1

  vmhba0:0:0:2 vmhba32:0:0:0

  vmhba0:0:0:3 vmhba32:0:0:1

  vmhba0:0:0:4 vmhba32:1:0:0

  vmhba0:0:0:5 vmhba32:1:0:1

  vmhba0:0:0:6 vml.020000000060003ff64c0a3403a0609f7a8112e89d566972747561

  vmhba0:0:0:7 vml.020000000060003ff64c0a3403a0609f7a8112e89d566972747561:1

  #

  I stop my esx 3.5 123630 box last night and tried the U4 area connect, but he wouldn't.  No matter how hard I tried.

  Any help would be great.

  From my experience, you will have problems (esx targets sees do not at all) if these 2 conditions are met simultaneously:

  • -MS < 3.1 Iscsi target

  • -ESX > 3.5u2 (not sure of 3.5u3)

  In other words, you need to upgrade your Target Iscsi MS at least 3.1 if you use the latest ESX updates.

  By example, if you use HP Storage blades SB600c (like me) update of your system management of storage AiO about 1.1.19 or later version.

• AGP Texture Acceleration shows as "not available".

  Hello

  The Dxdiag it says that there is no AGP Texture acceleration provision!

  Here what Intel said on this problem:

  -------------------------------------------------------------------------------------------------------------------------------------------------
  AGP Texture Acceleration shows as "not available".

  Symptoms:

  In the Microsoft * DirectX * Diagnostic tool (dxdiag), AGP Texture acceleration shows as "not available" in the "View" tab

  Cause:

  Older graphics drivers reported the DVMT (dynamic video memory technology) memory as non-local video memory (AGP). To improve compatibility, this was changed in new graphics drivers so that DVMT memory is reported as local video memory.

  Solution:

  This is expected behavior with the PV 14.x graphics drivers.

  Produced for Intel® Extreme Graphics, memory that has been reported as AGP memory when you use the PV13.x graphics drivers is now reported as local memory when you use drivers PV 14.x graphics. This change should not effect game or application performance since the local memory and AGP memory are identical in performance.

  Operating System: Windows * 2000, Windows * XP Home Edition, Windows * XP Edition Media Center, Windows * XP Professional, Windows * XP Tablet PC Edition

  ------------------------------------------------------------------------------------------------------------------------------------------------

  I didn't really know what to do, he said jst get the old drivers I think? Solutions, more than you know... This causes a problem I can not play games on my laptop lates...

  Thank you

  Hello

  To be honest your device isn't the best gaming laptop. As you probably know there's a graphics card with shared memory technology and graphics cards are not so powerful as to NVIDIA or ATI cards. I really wonder not that you can not play the latest games. And what is with games on one or two years? Are they working well?

  Only, you can try to install the latest driver, you can find on the download page of manufacturer. You can try, but in this case, the card will run without protection. Toshiba has designed a control of the use of the graphics card and do not allow to run on the upper limit.

• Pavilion network adapter are not not in Device Manager

  My Pavilion P6330f lost the internal network adapter (no internet connection, adapter are not not in Device Manager).  Is it possible to re-restore/refresh it?  I tried to do a scan to refresh hardware, but it doesn't show any internal network adapter.

  I was able to get back on the network by installing a wireless network adapter via the disk support provided with the wireless USB device and using Device Manager.

  It seems that the internal NETWORK adapter has gone (fried) and I need to install a new NETWORK adapter in one of the expansion slots.  Other options?

  Is this a common problem?

  D.

  No, it is not common, unless your home has experienced a surge\dropout of power or a bolt of lightning. What you are experiencing, this is usually the result of thet.

  Since your office worked five years ago, he certainly provided you a reliable service. You might consider looking for a PC replacement in 2015. SCP last usually about five years before replacement is required.

  Wireless, it's that a good option as no extra wire is a good thing.

• Every time I open my webcaam is showing that not found webcam or webcam is not working properly

  Original title: webcam problem

  I have a laptop Dell Inspiron N4020 Pentium bicoeur with Uttimate 32 bit Win7. But now there is a problem. My web cam is not working. Every time I open my webcaam is showing that not found webcam or webcam is not working properly. I installed a new software of I m not successful. So now, how I have useful?

  Is - this problem is hardware or software. Every time I go to the Device Manager there is no camera or webcam device. Is there a solution?

  Thank you.

  HerohetoChakma,

  The webcam appears under devices in the Manager of imaging devices? In the contrary case and the computer is under warranty, contact the Support Technology Guide.

  You can try...

  Webcam test

  Rick

• Operating system recognizes is not USB devices

  Also having problems with USB devices not recognized, I tried all of the suggestion in the forum so far... 3 xs... unplugged, battery removed, even left on overnite... did not work.

  r.Unning Vista Home Premium on a laptop MSI M670, updated everything. Peripheral USB work in other PC, turn on in the laptop but the OS does not recognize devices, in Device Mgr shows 'no conflict', "the device is working properly", I uninstalled, disabled, etc. & reinstall Vista does not work, either. I must be a solution!

  The I get no message when the device is plugged... That is to say: the thumb drive.

  Hello

  If you have tried all basic troubleshooting and device is showing to work properly and no noise of conflict-it you may need to reinstall the USB controllers to recognize.

  To remove and reinstall all USB controllers, follow these steps:

  * Click Start, run, type sysdm.cpl in the Open box, and then click OK.

  * Click the Hardware tab.

  * Click on the Device Manager button.

  * Expand Bus USB controllers.

  * Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  Restart the computer and reinstall the USB controllers.

  * Plug in the removable USB storage device and test to make sure that the problem is solved.

  Reference:

  http://support.Microsoft.com/kb/310575

  Hope this helps,

  Steve <> Microsoft Partner

• 'Incorrect function' during the initialization of an iSCSI target

  I have problems when you try to create a partition of 3.7 TB on Windows Server 2008 R2.

  

  I get the following error message when I try to initialize an iscsi target:

  

  What I am doing wrong.  The target is not part of a cluster.

  

  What I am doing wrong? I tried initilizating the disk with MBR and GPT time partitions and all do the same thing.

  Have you installed the software on the server (at least the host software) and establish connections iSCSI on two raid controllers? Looks like that may connect you to a controller, but the virtual disk is owned by the other controller.