ISE 1.2: Employee with recording of flotation

Similar Questions

• How to create two employees with the same name as the vendor record?

  Hi all
  
  We must create a vendor for the employee record, so that we can issue pretty invoice for cash payment. If there are 2 employees with the same name, how can we create records of supplier for these 2 employees? The system does not have the name of the provider in duplicate.
  
  Please notify.
  
  Kind regards
  HY

  Hello

  In R12, it is possible to create 2 employee with the same name but with a different number.
  And it is also possible to create these 2 employees as suppliers in Payables.

  HTH,
  Vik

• I can't call anyone on Skype, he said only: "problem with recording device" help?

  Could someone help me? my lack of Skype let me call anyone, when I try to call or answer a call it comes a message saying "problem with recording device"-does anyone know how to fix this help please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=no&cc=no&DLC=no&sw_lang=&product=7264...

  You can install this "driver - Lyd" (Realtek High-definition-lyddriver (HD))

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135685-1&CC=no&DLC=no&LC=No... =

• You can access your email from HP employee with 7 slate?

  You can access your email from HP employee with 7 slate?

  Hello

  Yes, you can access your company email by setting up an Exchange account in the Mail application.  Check the COMPUTER help site for more information.

• Mashita dvd - ram uj-820 s is with record burning now! or windows

  Laptop Toshiba equium a160-155 came with record now!  Base

  Hi Phillund,

  ·         What is the exact error message that you receive?

  ·         Since when are you facing this problem?

  There are few users who had the similar problem and solved it, you can check out the link below and check if that helps.

  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=50720

  If this does not resolve the issue, I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• XMLTYPE with record type

  Hi friends,

  Is it possible to use XMLTYPE with record types?

  For example, in the following code I expect output voltage

  < TY_EMP > < > 1001 EMPNO < / EMPNO > < ADAMS ENAME > < / ENAME > < SAL > 5000 < / SAL > < TASK MANAGER > < / JOB > < / TY_EMP >

  The code is...

  DECLARE

  Ty_emp RECORD TYPE IS

  (

  EmpNo INTEGER

  , ename VARCHAR2 (100)

  NUMBER of sal

  , VARCHAR2 (100) employment

  );

  r_emp ty_emp;

  BEGIN

  r_emp.EmpNo: = 1001;

  r_emp. Ename: = "Adams";

  r_emp. SAL: = 5000;

  r_emp.job: = "MANAGER";

  -This line gives the error.

  dbms_output.put_line (XmlType (r_emp). GETSTRINGVAL()); -Here, I don't want to talk about all the fields in the record. I just need to specify the name of the record.

  END;

  p.s. to use object types to generate XML data...

  SQL > ed
  A written file afiedt.buf

  1 TYPE to CREATE or REPLACE ty_emp () AS OBJECT
  2 empno INTEGER
  3, ename VARCHAR2 (100)
  4, NUMBER of sal
  5, job VARCHAR2 (100)
  6*   );
  SQL > /.

  Type of creation.

  SQL > ed
  A written file afiedt.buf

  1 DECLARE
  2 r_emp ty_emp: = new ty_emp (null, null, null, null);
  3 BEGIN
  4 r_emp.empno: = 1001;
  r_emp.ename 5: = "Adams";
  6 r_emp.sal: = 5000;
  7 r_emp.job: = "MANAGER";
  8 dbms_output.put_line (XMLTYPE (r_emp) .getstringval ());
  9 * END;
  SQL > /.
  1001 Adams 5000 MANAGER

  PL/SQL procedure successfully completed.

  SQL >

• Details of the employees with their image

  Hello

  I have an Employee Table and each employee has an image. I use the type of region as the anonymous Pl/sql block. I want to view the details of employee with their Image. How can I do this?

  For work on what happens with P6_PRODUCT_IMAGE, we must continue to seek a single application - see also pages 6, there is an automatic line extraction process - it is vital for the mechanics of image display in the report.

  This help in your understanding peut

  https://forums.Oracle.com/message/3861537#3861537

• Details of employees with salary max theor Dept

  Hi all
  
  I'm trying to find some thedetails of all employees with the maximum salary in their Department.
  
  I find using a few max (salary)
  SELECT max (salary) FROM employee GROUP BY Dept.
  But how to find the empno, ename, salary and other details?
  
  Here are the data of employees

  EMP NO  NAME       INIT  LASTNAME     DEPT  NO       HIRE DATE  JOB       LEVEL   SEX  BIRTH DATE   ARY     BONUS    COMM
  000010  CHRISTINE  I     HAAS         A00   3978     1965-01-01 PRES      18      F    1933-08-24   52750   1000     4220
  000020  MICHAEL    L     THOMPSON     B01   3476     1973-10-10 MANAGER   18      M    1948-02-02   41250   800      3300
  000030  SALLY      A     KWAN         C01   4738     1975-04-05 MANAGER   20      F    1941-05-11   38250   800      3060
  000050  JOHN       B     GEYER        E01   6789     1949-08-17 MANAGER   16      M    1925-09-15   40175   800      3214
  000060  IRVING     F     STERN        D11   6423     1973-09-14 MANAGER   16      M    1945-07-07   32250   500      2580
  000070  EVA        D     PULASKI      D21   7831     1980-09-30 MANAGER   16      F    1953-05-26   36170   700      2893
  000090  EILEEN     W     HENDERSON    E11   5498     1970-08-15 MANAGER   16      F    1941-05-15   29750   600      2380
  000100  THEODORE   Q     SPENSER      E21   0972     1980-06-19 MANAGER   14      M    1956-12-18   26150   500      2092
  000110  VINCENZO   G     LUCCHESSI    A00   3490     1958-05-16 SALESREP  19      M    1929-11-05   46500   900      3720
  000120  SEAN             O'CONNELL    A00   2167     1963-12-05 CLERK     14      M    1942-10-18   29250   600      2340
  000130  DOLORES    M     QUINTANA     C01   4578     1971-07-28 ANALYST   16      F    1925-09-15   23800   500      1904
  000140  HEATHER    A     NICHOLLS     C01   1793     1976-12-15 ANALYST   18      F    1946-01-19   28420   600      2274
  000150  BRUCE            ADAMSON      D11   4510     1972-02-12 DESIGNER  16      M    1947-05-17   25280   500      2022
  000160  ELIZABETH  R     PIANKA       D11   3782     1977-10-11 DESIGNER  17      F    1955-04-12   22250   400      1780
  000170  MASATOSHI  J     YOSHIMURA    D11   2890     1978-09-15 DESIGNER  16      M    1951-01-05   24680   500      1974
  000180  MARILYN    S     SCOUTTEN     D11   1682     1973-07-07 DESIGNER  17      F    1949-02-21   21340   500      1707
  000190  JAMES      H     WALKER       D11   2986     1974-07-26 DESIGNER  16      M    1952-06-25   20450   400      1636
  000200  DAVID            BROWN        D11   4501     1966-03-03 DESIGNER  16      M    1941-05-29   27740   600      2217
  000210  WILLIAM    T     JONES        D11   0942     1979-04-11 DESIGNER  17      M    1953-02-23   18270   400      1462
  000220  JENNIFER   K     LUTZ         D11   0672     1968-08-29 DESIGNER  18      F    1948-03-19   29840   600      2387
  000230  JAMES      J     JEFFERSON    D21   2094     1966-11-21 CLERK     14      M    1935-05-30   22180   400      1774
  000240  SALVATORE  M     MARINO       D21   3780     1979-12-05 CLERK     17      M    1954-03-31   28760   600      2301
  000250  DANIEL     S     SMITH        D21   0961     1969-10-30 CLERK     15      M    1939-11-12   19180   400      1534
  000260  SYBIL      P     JOHNSON      D21   8953     1975-09-11 CLERK     16      F    1936-10-05   17250   300      1380
  000270  MARIA      L     PEREZ        D21   9001     1980-09-30 CLERK     15      F    1953-05-26   27380   500      2190
  000280  ETHEL      R     SCHNEIDER    E11   8997     1967-03-24 OPERATOR  17      F    1936-03-28   26250   500      2100
  000290  JOHN       R     PARKER       E11   4502     1980-05-30 OPERATOR  12      M    1946-07-09   15340   300      1227
  000300  PHILIP     X     SMITH        E11   2095     1972-06-19 OPERATOR  14      M    1936-10-27   17750   400      1420
  000310  MAUDE      F     SETRIGHT     E11   3332     1964-09-12 OPERATOR  12      F    1931-04-21   15900   300      1272
  000320  RAMLAL     V     MEHTA        E21   9990     1965-07-07 FILEREP   16      M    1932-08-11   19950   400      1596
  000330  WING             LEE          E21   2103     1976-02-23 FILEREP   14      M    1941-07-18   25370   500      2030
  000340  JASON      R     GOUNOT       E21   5698     1947-05-05 FILEREP   16      M    1926-05-17   23840   500      1907
  200010  DIAN       J     HEMMINGER    A00   3978     1965-01-01 SALESREP  18      F    1933-08-14   46500  1000      4220
  200120  GREG             ORLANDO      A00   2167     1972-05-05 CLERK     14      M    1942-10-18   29250   600      2340
  200140  KIM        N     NATZ         C01   1793     1976-12-15 ANALYST   18      F    1946-01-19   28420   600      2274
  200170  KIYOSHI          YAMAMOTO     D11   2890     1978-09-15 DESIGNER  16      M    1951-01-05   24680   500      1974
  200220  REBA       K     JOHN         D11   0672     1968-08-29 DESIGNER  18      F    1948-03-19   29840   600      2387
  200240  ROBERT     M     MONTEVERDE   D21   3780     1979-12-05 CLERK     17      M    1954-03-31   28760   600      2301
  200280  EILEEN     R     SCHWARTZ     E11   8997     1967-03-24 OPERATOR  17      F    1936-03-28   26250   500      2100
  200310  MICHELLE   F     SPRINGER     E11   3332     1964-09-12 OPERATOR  12      F    1931-04-21   15900   300      1272
  200330  HELENA           WONG         E21   2103     1976-02-23 FIELDREP  14      F    1941-07-18   25370   500      2030
  200340  ROY        R     ALONZO       E21   5698     1947-05-05 FIELDREP  16      M    1926-05-17   23840   500      1907

  I would like to find (empno, name, job, dept, sal) details of all employees earning a maximum wage in their Department.
  I'm not sue if I have to use funcion analysis here.
  
  THX
  Rod.

  select *
  from
  (
     select e.*,
            dense_rank() over (partition by dept_no order by salary desc) dr
     from   employees e
  )
  where dr = 1;
  

• ISE 1.2 CWA with several Ssnp - SessionID replication / Session expired

  Hi all.

  I have a nodes of Services (2) policy (NSP) in a deployment of ISE launched 1.2 patch 1. We use Wireless MAB and CWA on Wireless LAN controllers v3.3.3 running 5760.

  We hit a problem in which a client comes first MAB and then is redirected to a custom portal CWA. The customer then receives a message from the Session has expired. This seems to be related to the fact that the CWA is technically an authentication of 2 floors (MAB by the WLC) and then of the CWA by the customer. Specifically, it seems to happen when the WLC makes his request to access PSN - 1 RADIUS MAB and then the customer comes to PSN - 2 to finish the CWA. This problem does not occur when a NHP is being used and all traffic authentication (RADIUS MAB and CWA) caters to a unique PSN.

  Customers solve the COMPLETE domain name in the redirect URL using DNS public and a public DNS zone file (let's call it cwa - portal example .com). CWA - portal example .com has two records for the two nodes of NHP. DNS responds to queries using Robin DNS.

  I have the Ssnp configured in a node group for replication of session information between PSN, but this does not seem to make a difference in the behavior.

  So I ask:

  What is the architecture recommended for CWA when you use more than one PSN? It seems that you must keep the stream two authentication pinned together so that they both hit the PSN even when you use more than one PSN in a deployment. A load balanced on the SessionID string balancer comes to mind (demand of RADIUS MAB and contain both the CWA URL this unique by client SessionID), but that seems awfully oversized for a seemingly simple problem. On the other hand, it seems also that by using a configuration node group should easily be able to reproduce customer SessionID to all nodes in the deployment, so that is not a problem. That is, if the WLC authenticates MAB on PSN-1, then PSN-1 should talk the group node such that when the client CWA on PSN - 2, 2 - PSN responds with a Session expiration message.

  Is there a Cisco documentation which talks about this?

  Maybe in relationship:
  https://supportforums.Cisco.com/discussion/12131531/ISE-12-guest-access-...

  Justin

  Hi Justin,

  Node groups are mainly used for redundancy of the sessions that are waiting for status.  Thus, because the controller is configured to use the PSN-1 as the first RADIUS server, PSN-1 will be the session on the client information.  This information is not shared with PSN-2 that's why you see "expired session".  In short, the node that processes applications MAB, must be the node that serves as the personalized Portal.

  Round robin DNS is preferable for use with the sponsor of the portal and portal of my devices with an FQDN that is similar to sponosr.example.com and mydevices.example.com.  For CWA, a load balancer is the best option if you want to use multiple Ssnp.  Aaron Woland wrote and article covering the ISE and the load balancing.  F5 has also some useful information on how to configure their loadbalancers with Cisco ISE.

  Kind regards

  Tim

• Cisco ISE 1.1.1 with Windows posturing

  Hello

  We tired for configured windows posturing here's the scenario

  We saw five ise boxes 3315 with version 1.1.1 off them 2 is admin, 2 is PS and 1 MNT

  and we have local Symantec and WSUS Server.

  We make posturing for Windows where I have a few questions

  (1) is there an integration here of the local WSUS server with Cisco ISE where Cisco ISE can automatically take all the mandatory WSUS update according to the crititcality of the WSUS server.

  (2) what is advised to set up the strategy of the Posture of the posture of windows in Cisco ISE and if manually configure windows political posture using specific KB and if there is an update available on Microsoft will we be able to configure the policy for the new update.

  (3) we have configured authentication dot1x in cisco ise and asked as well as on switch port where once the user must be connected to dot1x port of the switch it invites username and password dot1x and therefore, authorization policy, it gives vlan appropriate dynamics.

  But what are the ways where we can restrict the machine which is rather than the assets of the company and even if the user's user name and password in short any employee aware how we can restrict the user making the machine rather than the assets of the company?

  (4) can configure US policy posture for antivirus which will keep us in normal mode and at the same time, we can put posturing for windows which monioring mode which only monitor policy posture and reflected in the monitoring, log in which does not restrict the network for windows posturing

  That will be great if any one can please help me to get the issues

  Thank you

  Pranav

  What follows is under the POLICY-OF ELEMENTS of STRATEGY-POSTURE-> REQUIREMENTS > >

  

  What follows is located under

  POLICY OF-> ELEMENTS OF STRATEGY-> POSTURE->

  REPAIR-> WINDOWS SERVER UPDATE SERVICES REMEDIATION ACTIONS

  

  What follows is part POLICY-> POSTURE

  

  These settings work ALMOST flawlessly for me by forcing her we approved on our WSUS server for our group of workstations updated (all of our laptops are members of the) which meet the criteria of severity EXPRESS (critical and Important). Now, what I've discovered in the last few days is that... MS seems a bit random in their identification of what severity level they assign to their updates. For example... I think that a service pack of the operating system would be considered IMPORTANT if not CRITICAL... however... Look at this from the identification of the server WSUS from Windows 7 Service Pack 1:

  

  Thus, those who updates you deleted, I'd go throgh your WSUS server to identify how they are identified by gravity, then according to your needs set the parameters of the ISE accordingly to ensure that you get updates you plan.

  Hope this helps everyone out there who has similar problems.

  Thank you

  Dirk

• "Problem with recording device" - with no Microphone

  In short, despite not having a mic that I usually use Skype calls to be able to listen to friends when you play and do stuff in general. However today all of a sudden when we tried it auto-a ended the call with an error 'problem with the recording device '.

  It happens both with echo and simple restart does not solve the problem either.

  Apparently, with the new codec NGC (new generation call), which is now used for all calls from Skype, it is mandatory to have a microphone connected to the computer. Without a microphone, Skype calls will not work.

• The problem with recording

  Well, just at the moment where someone starts calling and he wants to take he writes "the problem with the recording" he calls here Echo and all the time the same... They advised you'd like?

  In Skype, open Tools-> Options-> Audio settings. Which device is selected as the Microphone. You have several options available in the select box?

• synchronize slides with recorded narration

  I try to synchronize and save slide show with balls and slides synchronized with the recorded narration but recorded track replay in registration mode although it plays fine in playback mode.

  recorded track replay in registration mode although it plays fine in playback mode.

  Do you mean you can select: play slide show recorded, but it does not at all read or he plays bad?

  If so, disable the check from: play > clear the record... then save the slide show again.

  

• Problems with recording / playback volume and record length

  I turned up the logging level in the in the Audio section on the Control Panel, but that sound recorder (Windows) in entertainment relit at very low volume.  My headset with microphone and speakers work very well for Skype calls, so I think that the microphone is ok.

  Also, is it possible to save more than a minute?

  Thank you

  Hello Tjansen,

  Thank you for your message.  Please, try the following steps:

  Double-click on the taskbar of the speaker icon > click on 'Options' > select 'properties '.

  Make sure that the 'Micro' and 'PC speakers' have check marks.

  In addition, ensure that your output device and Microphone are not silent by displaying the mute boxes on each category

  You can then adjust the volume coming out of your microphone with the volume slider, you can adjust the bass etc.

  To do this, click on 'Options' > select 'advanced controls '.

  With respect to the registration of more than one minute, you can follow the steps below as a workaround, or you can download a 3rd party program that performs the actions you have requested.

  Allow the recorder record silent for 60 seconds.  Click 'Edit' > 'Copy' > click 'Edit' > 'Paste' > 'Insert '.

  This will add 60 more seconds. Click on "Edit" > "Paste" > "Insert" as many times as you need. Save as a file 'model' (name it something like long record.wav)

  Then, when you want to save something for more than 60 seconds, open the long record.wav file and instructions on the existing (virgins).

  Make sure that you save the new record with a new file name.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• ISE 2.0 CSR with several OUS

  Greetings,

  Recently, I have set up a new server ISE 2.0 and can't generate a CSR.  The problem is that our CSR requires more than one ORGANIZATIONAL unit. IUG EHT 2.0 certificate signing request, there is only one space into an OU, so I think that you should enter the entire chain OR on this line.

  

  Now when I generate the CSR I have to add several UO - in ISE 1.3 there was a subject line to enter the entire string. 2.0 - not so much.

  

  When I check the CSR using openssl for the right object before sending is what I see that I think is wrong.

  

  Here's what it looks like to the ISE

  

  I tried to flee the "equal" sign with a backslash, but the OU\ = always shows up. Once more, I'm sure that isn't true since the first ORGANIZATIONAL unit has no one-in front of the "equal" sign.

  I've never had a problem on our server ISE1.3 or our ACS servers to the generation of CSR. Has anyone encountered this problem? Am I missing the proper syntax? Cisco has no documentation on several UO in 2.0 of ISE.  I have a TAC is open, but I just wanted to see if someone had met or knows how to solve this problem.

  Thank you!

  NETWERK - as a solution, getting up a server 1.3 and generate your certificates. Once signed, export your pub key and pvk and import into 2.0. Of course, everything should match but it should work. If your use of a wildcard, it must be fast.  If this isn't the case, you will need to repeat the process for each node. GL