ISE 1.3 network access: UseCase is equivalent to comments feed

Similar Questions

• What changes does Network Access Manager has to do in Windows to work properly?

  Our Network Access Manager in the Windows machines to work in cenario with ISE CISCO 802.1 x.  In some machines NAM does not work well. What features of Windows 7 is NAM module needs to interact with the operating system?

  Glad you were able to solve your problem and take the time to update (+ 5 from me). If your problem is completely resolved, you must mark the thread as "Answered" :)

• Toshiba NB520 11V - how to install a 3G network access module

  Hello

  I recently bought a NB520 11V and I was interested if it's possible and how to install a module 3G network access. And if it is possible, what are the specifications of the installation of a 3G network access module I have to buy.

  Kind regards
  Luis

  Hello

  As I know that some of the model supports NB500 is the 3G module but the NB520 does not support 3G.

  The 3 G CARD-F3307R2 (900TEG), which is equipped in the NB500 is the number of piece K000124470 (google for it)
  But to be honest I'm not very well if this module is compatible with the Mr. NB520 I guess not

• Property of local network access

  After installing SP2

  insufficient right SP2 to the ownership of network access

  Hello

  I put t see no problem why Windows XP with SP2 should t works on the Satellite Pro. The Microsoft SP2 includes a large number of bug fixes. In addition the SP2 installs a windows firewall that must be enabled on your device. But that innovation is compatible with all laptops from Toshiba. Like Quad please visit Microsoft site to find an SP2 information.

  PS: It would be great if you will write about your unit name and problems with your device.

  Good bye

• In Windows 8 network access protection

  How can I activate on the network access Protection in Windows 8?

  Driley25,

  I understand that you must enable the network access protection feature in windows 8.

  Steps below:

  1. on the screen type Windows apps services.

  2. on the right, click settings

  3. on the left side, click local services.

  4. the PC will put you on the generic desktop and you will see the box.

  5. on the right to scroll down, the ads are in alphabetical order so just head to section N and should see.

  Please answer as soon as possible.

  Thank you

• Pavilion laptop g6: Network Access Protection

  I have a laptop HP pavilion g6 & my security keeps warning me that my network access protection is turned off & when I click on it - it does nothing it does it - what is the network access Protection & how I turn it on?

  Hi robindt,

  Same thing here.

• Network access: is it let me connect but a yellow explanation mark appears who says no access to the network

  sound to connect me but a yellow explanation mark appears who says no network access why is it?

  See if there is something in there that helps:-

  http://www.ComputerActive.co.UK/CA/PC-help/2033224/network-solved

  If there is, please voet as useful.

  Thank you.

• How to set up the Windows network access program?

  original title: how to set up the N A P

  How to access my windows network access program

  Hi bryan stacy,.
   
  - What version of the operating system are you using?
  -Are you talking about in the center of network share or the network connection folder?
   
  If you are referring to the network connection folder, see the following link for more information:
  Work with the network connections folder

• How to turn on my computer network access proctection

  In my action center it says that my proction of network access is disabled how do I turn it on

  Help, please

  Follow this option if you are using Win7

• Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security

  In the diary of my application event log errors, I have many of these MSSHA ID 1027 events, get Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security.    I understand what its about, but have no idea how or what to do about it.  Help!

  http://TechNet.Microsoft.com/en-us/library/cc735442 (v = WS.10) .aspx? ppud = 4

  According to this site, no user action is required.

  I don't know why you receive this error message, but apparently is not a problem.

  http://msdn.Microsoft.com/en-us/library/dd565668 (v = VS. 85) .aspx

  the above site is a very detailed description of the error.

• Disable network access to the registry

  Hello

  How to disable network access to the registry?

  Thank you
  Agnes

  Please explain more in detail what you are trying to do; for example, your end goal. Include information about your computers and network (working group? Field?) so you can get targeted help you want. These links will show you what information to include in your next post:

  How to post

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.Microsoft.com/default.aspx/KB/555375 - how to ask a Question MS - MVP - Elephant Boy computers - Don ' t Panic!

• My network access protection is disabled, impossible to turn it back on

  Network access protection (n.a.p) is part of the action, I'm sure you knew that already.

  * original title - my network access protection is disabled. I can't activate it reguardless of how many times I smack my vaio with a help of hammer.p'ls of luge. There is nothing obvious, that I can do to fix this.*

  NAP is a process whereby a domain-based network control which computers and are not getting any network access, it is not something you can turn on or off, unless you use an area in your home.  For more information, see here:

  http://TechNet.Microsoft.com/en-us/network/bb545879.aspx

  writing in the new message: * e-mail address is removed from the privacy... *

  Network access protection (n.a.p) is part of the action, I'm sure you knew that already.

• Can I network access Protection for a home network? How do activate you it?

  Network access protection - how do I turn it on?

  Network access protection is not available in a home network.  It requires a server computer that is running Windows Server 2008 .

• No IPv4 Ipv6 Internet network access.

  Hi I have problems connecting to the internet from my room which I've never had before. One of the other computer is in another room and it says ipv4:Internet Ipv6:Local and mine Ipv6 without network access. Help?

  Hi Kin6591,
   
  1. temporarily disable the firewall and third-party antivirus on the computer for a test.
   
  2. check that the competent services
  =========================
  a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.
   
  Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
   
  b. right click on "Peer Networking Grouping" service and choose Properties.
  c. check if the service is started; If this isn't the case, please click on the Start button and see if it works.
  d. you can also choose automatic next to startup type.
  e. click OK.
  f. Please repeat the above steps with another service: PNRP Machine Name Publication Service.
   
  3 modify the key to register IPv6 to enable IPV6

  ==========================

  
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  a. Click Start, type regedit in the search bar and then click regedit in the list programs.

   
  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.
   
  b. look for, and then click the following registry subkey:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
   
  c. check whether the "DisabledComponents" registry key exists. If so, move on the next steps.
   
  d. double-click "DisabledComponents" registry key and change the value to 0.
   
  (If the key does not exist, please create the above key and assign a value of 0)
   
  e. exit the registry editor and then restart the computer.
   
  For more information, you can check the link below:
  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7 and Windows Server 2008
   
  http://support.Microsoft.com/kb/929852
   
  Hope this information is useful. Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• How to enable the network access Protection?

  How can I activate on the network access Protection, he tells me it's off and that it must be manufactured on. So please can you me how to enable Network Access Protection?

  You don't need to turn it on. Network access protection is a feature that for use in business and companies to make sure that only clients which are safe and meet certain security requirements could access the network location. It is something that will be in service by admin in a company if wanted.

  If your PC is part of the domain network and it is part of the company contact your admin to ask if this feature is applicable. Otherwise, don't need to worry about this. This is just to inform you about the status of the PAN and you don't need to do anything.