Network access: is it let me connect but a yellow explanation mark appears who says no access to the network
sound to connect me but a yellow explanation mark appears who says no network access why is it?
See if there is something in there that helps:-
http://www.ComputerActive.co.UK/CA/PC-help/2033224/network-solved
If there is, please voet as useful.
Thank you.
Tags: Windows
Similar Questions
-
trying to update microsoft office 2010, but get an error 80070652? who says another program is still installing. IAM running windows vista. Even when I try to install a game its says another program is still being set up.
In addition, if the above does not help, there may be a registry key interfere with the installation of the update. Take a look at the information in the article on http://www.installsite.org/pages/en/msifaq/error/1618.htm.
Sloan Crayton
-
WiFi CONNECTED but showing YELLOW ASTERISK in the taskbar
My Wifi works fine with access point and connected, but the problem is in the bottom right of the network notification task bar it's to show that it is not connected with asterisk yellow (as a standard asterisk should show that when Wifi is not connected).
I really appreciate your opinion and suggestions as possible.
Thank you.
In my case, the problem was apparently last updated from windows.
I changed parameter "Service.msc" in "Windows Update" from automatic to manual and restarted my laptop.
Since then, it works fine.
-
WiFi connected but browsers and mail stop working
Here's the situation:
iMac, 4 years, OS X 10.7.5
WiFi connected but, browsers and mail stop working sometimes recently.
Checked the wifi & browser settings.
Do not remember something like what happens when connected online cat5.
Curious to know what is happening.
Say local store card is perhaps go wrong.
The machine is only 8 ' of router.
Another pc on the network does not appear to be a problem.
Any help appreciated.
You can connect an Ethernet cable to see if it works on Ethernet when you encounter problems easily?
Try to use your own DNS server. Because if the DNS server that you use currently is not translate www.company.com name to IP address nn.nn.nn.nn, it will look like you do not have internet access.
System Preferences-> network-> advanced-> DNS-> [+]
208.67.222.222
208.67.220.220
Google DNS
8.8.8.8
8.8.4.4
You can remove them later if you want using the [---] button.
If this does not work, it could mean that your router is having problems. Most routers act as the local DNS server, make a cache and especially fair bet as a DNS server provided a front for the access provider. If the router begins to act, it can often be cleared by power cycling the router.
And once again, if you provide your own DNS server works, then it could be DNS servers of the ISP, but less likely that they would be getting a lot of complaints from their customers (assuming that customers thought it was DNS servers).
You know, there are 2 sides to any path of communications.
If it is technically possible for radio Wi - Fi of the iMac to fail, it's actually not very common.
-
Messages will not let me connect my Apple ID
Recently, I've restored my laptop to factory settings. When you try to set up the Messages, it wouldn't let me connect my Apple ID. I know he recognizes when I use the right credentials, because he tells me that my password is incorrect, when I enter the wrong password. When I enter the password, the ID and the password letters out gray (is no longer editable) for one second then back to black (you can type in the box again). I would really like to be able to text my cell phone, so please let me know what I can do about it.
There are hundreds like you with the same question... all I can advise is, relax, go get a drink, there is no solution, the only solution is to wait for the apple engineers to fix it... I tried to solve this problem for 11 hours... ABSOLUTELY everything tried... nothing doesn't work, don't waste time lol
-
My loggin screen Windows 7 says I'm connected BUT...
My loggin screen Windows 7 says I'm connected but still looking for my password. When I retype it, it tells me that this is not the right password... but when I come back, it always says that I'm connected. How can I get past the loggin screen?
Hello
- You are able to view the desktop?
- Are you sure that you provide the password?
- What do you mean by "" my loggin Windows 7 screen says I'm connected but always looking my password. " ?
If you enter the wrong password, in the prompt below your user name may indicate the computer as user however will not connect unless you provide the password.Check out the link:
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126 -
ORA-33288: another user has inconsistent access to the analytic workspace
Gurus
A customer of our meeting suite error when make action (refresh the data) of the responsibility for the EBiz project portfolio analysis
# # 0 in detail java.sql.SQLException: ORA-34344: FPA analytic workspace. FPAPJP is not attached.
ORA-06512: at the 'APPS '. FPA_UTILITIES_PVT', line 129
ORA-06512: at the 'APPS '. FPA_PROCESS_PVT', line 2467
ORA-33272: FPA analytic workspace. Cannot open FPAPJP.
ORA-33288: another user has inconsistent access to the analytic workspace FPA. FPAPJP and the timeout has expired.
ORA-06512: at line 1
I searched the documentation of OLAP, metalink, google, but all simply suggest "Expect that the conflict is over.". We waited and asked their DBA to check active connections, but none has proven to help us.
Issues related to the:
======
1. how to avoid this error?
2. How do I know the number of users / user information connected to the FPAPJP workspace?
3. How can we close these sessions?
Really appreciate your inputs.
Thank you
Charlene# 1, it seems that the process is trying to detach a workspace that is not attached. Just check in your code if you try off somewhere and work space is not attached.
Thank you
Brijesh -
Access outside the firewall APEX
We have APEX 4.0 on Glassfish and the listener of the APEX. We would like to be able to access the APICES of the outside of the firewall. Can you tell me a few steps on this operation. I found a mention on the APEX site that would be inside the firewall and not external APEX earpiece but that's all.You say that you run the listener of the APEX on Glassfish, so yes, APEX listener goes everywhere go to Glassfish.
Suggestion of Udo is a little different from my second option and could be better. In your current configuration, you have two components - the listener of the APEX running on Glassfish application server and the database that runs your APEX applications. Udo adds a third component, a HTTP server, such as Apache, which is your portal to the applications.
If you can do:
the user's browser HTTP > Apache AJP or HTTP >-->APEX Listener on Glassfish Oracle Net firewall > Oracle database (Udo suggestion)
OR
the user's browser HTTP > APEX Listener on Glassfish Oracle Net > firewall --> Oracle database (my option 2)
OR
the user's browser HTTP >--> APEX Listener on Glassfish Oracle Net firewall > Oracle database (my option 1)The key is that the firewall must be configured to allow traffic that will pass through it.
The advantage of my option 2 or Udo suggestion is that you only allow traffic from a particular server outside the firewall in a protocol specific to a server inside the firewall. Udo suggestion makes this server information less vulnerable on what is inside the firewall and can be more easily used to simple HTML pages. It also makes changes less to your current configuration.
-
tvwizard2ft.exe
I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.
Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.
You may also download and install .NET Framework 3.0 (SP2)
-
Cisco vpn client to connect but can not access to the internal network
Hi all
I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network
Any help would be much appreciated.
Hi Samir,
I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
(The link above includes split tunneling, but this is just an option.
Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.
Let me know if this can help,
See you soon,.
Christian V
-
I have WRT1900AC firmware version 1.1.8.164461. The wireless channel interference is not a problem.
Under access as a guest, I can see allow guest access turned on, I have a SSID of 2.4 Ghz and a password for the guest network. Using my 2.4 Ghz devices, I can see the SSID I just referred to. My devices can connect to it.
But, once connected, I never receive a prompt for the password and I have no internet access. The screen Smart Wi - Fi are always "0 clients" are currently connected, regardless of the number of devices made the level of SSID link.
I installed the router months ago, but did not know that access as a guest did not work because it always seemed well on the router and I didn't have a camera to test with. But I just discovered that many guests were upset that they can't connect with the password that I gave them. I am very disappointed by the Linksys support answer to my question.
For now, I am getting the correct behavior after a reset of the WRT1900AC plant. The guest network is now a password in a browser for the two test devices. My comments network IP addresses have the prefix 192.168.3.x and I can't find an address 192.168.2.x on my network.
-
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK
I tried to set up a simple customer vpn using this document
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of VmHKIhnF4Gs5AWk3
VmHKIhnF4Gs5AWk3 encrypted passwd
hostname VOIPLABPIX
domain voicelab.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside 208.x.x.11 255.255.255.0
IP address inside 172.10.2.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool voicelabpool 172.10.3.100 - 172.10.3.254
history of PDM activate
ARP timeout 14400
NAT (inside) - 0 102 access list
Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1
Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac
Crypto-map dynamic map2 10 set transform-set trmset1
map map1 10 ipsec-isakmp crypto dynamic map2
client authentication card crypto LOCAL map1
map1 outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 encryption aes-256
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address voicelabpool pool cuclab
vpngroup dns 204.x.x.10 Server cuclab
vpngroup cuclab by default-field voicelab.com
vpngroup split tunnel 101 cuclab
vpngroup idle 1800 cuclab-time
vpngroup password cuclab *.
Telnet timeout 5
SSH 208.x.x.11 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 172.10.1.2 255.255.255.255 inside
SSH timeout 60
Console timeout 0
username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2
Terminal width 80
Cryptochecksum:b03a349e1ac9e6022432523bbb54504b
: end
Try to turn on NAT - T
PIX (config) #isakmp nat-traversal 20
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
HTH
-
I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well
Thank you
interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.88.10.254 255.255.255.0
!
interface Management0/0
Shutdown
nameif management
security-level 0
no ip address
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the PAT_to_Outside_ClassA object
10.88.0.0 subnet 255.255.0.0
network of the PAT_to_Outside_ClassB object
subnet 172.16.0.0 255.240.0.0
network of the PAT_to_Outside_ClassC object
Subnet 192.168.0.0 255.255.240.0
network of the LocalNetwork object
10.88.0.0 subnet 255.255.0.0
network of the RemoteNetwork1 object
Subnet 192.168.0.0 255.255.0.0
network of the RemoteNetwork2 object
172.16.10.0 subnet 255.255.255.0
network of the RemoteNetwork3 object
10.86.0.0 subnet 255.255.0.0
network of the RemoteNetwork4 object
10.250.1.0 subnet 255.255.255.0
network of the NatExempt object
10.88.10.0 subnet 255.255.255.0
the Site_to_SiteVPN1 object-group network
object-network 192.168.4.0 255.255.254.0
object-network 172.16.10.0 255.255.255.0
object-network 10.0.0.0 255.0.0.0
outside_access_in deny ip extended access list a whole
inside_access_in of access allowed any ip an extended list
11 extended access-list allow ip 10.250.1.0 255.255.255.0 any
outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1
mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool
NAT static NatExempt NatExempt of the source (indoor, outdoor)
NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3
NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search
!
network of the PAT_to_Outside_ClassA object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassB object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassC object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
dynamic-access-policy-registration DfltAccessPolicy
Sysopt connection timewait
Service resetoutside
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic dynmap 10 set pfs
Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1
life together - the association of security crypto dynamic-map dynmap 10 28800 seconds
Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic dynmap 10 the value reverse-road
card crypto mymap 1 match address outside_1_cryptomap
card crypto mymap 1 set counterpart x.x.x.x
card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1
card crypto mymap 86400 seconds, 1 lifetime of security association set
map mymap 1 set security-association life crypto kilobytes 4608000
map mymap 100-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto ipsec-over-tcp port 10000
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 50
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
preshared authentication
aes-256 encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal BACKDOORVPN group policy
BACKDOORVPN group policy attributes
value of VPN-filter 11
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
BH.UK value by default-field
type tunnel-group BACKDOORVPN remote access
attributes global-tunnel-group BACKDOORVPN
address pool Admin_Pool
Group Policy - by default-BACKDOORVPN
IPSec-attributes tunnel-group BACKDOORVPN
IKEv1 pre-shared-key *.
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
Excellent.
Evaluate the useful ticket.
Thank you
Rizwan James
-
I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet. I tried all of the obvious solutions. Windows 7
Original title: unidentified network
Hello
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description, you are having problems with the unidentified network error message.
Perform the steps from the link below and see if it helps.
Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.
Good day!
Hope this information helps.
-
Ipad Cisco ipsec VPN connects but not access to the local network
Hi guys,.
I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.
If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.
Cisco 877.
My config is attached.
Any ideas?
Thank you
Build-in iPad-client is not useful to your configuration.
You have three options:
(1) remove the ACL of your vpn group. Without split tunneling client will work.
2) migrate legacy config crypto-map style. Here, you can use split tunneling
3) migrate AnyConnect.
The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.
Maybe you are looking for
-
IPad transfer questions from family members share
We will offer you iPad from MOM to Dad. It is a model cell phone and Wi - Fi. It is the first account of the family action under his plan identifier Apple. She is a member of the plan with his own unique iCloud account and Apple ID. She has unique
-
Why iTunes making queries to the store when my computer is idle?
Just moved. Do not have an internet connection unless I am attached to my iPhone. I tend to leave operational iTunes. If I come back after work, or after an absence of a few hours, and there is always at least 1 dialog box open read "we could comple
-
Missing option iCloud photo library
the left image shows iphone 6s + setting > iCloud > Photos and the right side is iphone 5. both run new iOS 9.2.1. but it lacks the iPhone 6 s + very important option, which is to toggle the photo library to iCloud. already discuss with apple support
-
When you work in Outlook, I can't move emails from one folder to another.
I get the following error message. "The messaging interface has returned an unknown error. If the problem persists, restart Outlook. "I restarted several times without change to the problem. What can I do to fix this?
-
Email takes forever to receive messages
Original title: "problems of Email" Windows Vista; E-mail takes to always receive messages and when he finally got, it publishes every message three times. I can't find any information on how to solve this problem. I appreciate all the advice. Thank