ISE 1.4 - silent authentications

Similar Questions

• ISE 2.0 mobile authentication using mac address

  Hi all

  Requirement:

  We categorized the mobile users in the category three (VIP, EMP, MGMT) and three SSID has been configured in flexconnect environment.  Normal PSK is configured, but we need authentication for example mac/username, password of the ISE.

  Please guide me how to configure the SSID profile & what is require in ISE to reach the requirement. We have the base license in ISE and don't want profiling such as Apple devices... etc.

  The user can make any mobile phone provider in a group such as VIP and will get subnet A... EMP will get subnet B... etc.

  How to set up the strategy in ISE so that we can add mobile mac address in ISE and it will be connected.  Without mac entry it will not connect to the ssid.

  Thank you

  Kamlesh

  1. Create a group of identity of endpoint for each category (VIP, EMP, MGMT).
  2. Add the MAC address of the mobile device to its respective identity group.
  3. Configure authentication rule to use the sequence identity of internal endpoints .
  4. Create authorization rules that allow access based on the identity of endpoints and SSID point group.

  So let's say VIP devices connect to the WLAN SSID VIP. The authorization rule would look like this:

  • Name of the rule - VIP Wireless
  • Conditions - VIP and RADIUS: Called-Station-ID CONTAINS VIP-SSID
  • Permissions - PermitAccess

  VIP Wireless example

  

  It narrows the MAC must be in the group VIP and VIP-SSID WIFI connection in order to be allowed access to the network. Need you an authorization for each identity group rule. You can use END WITH square CONTAINS in case you have a different SSID that might contain some VIP-SSID (e.g., VIP-SSID2), but don't want this rule to deal with for this connection.

  The rule of authentication should be configured to use the sequence of Points of ending internal identification.

• Cisco ISE 1.3 - Mab authentication with a vlan for each foor

  Hello

  A client wants to implement authentication MAB with a vlan for each floor. I found a solution of Loïc

  I have set up the following:

  -the profile of different authentication with a vlan different.

  -Add the endpoint (printer etc) endpoint identity.

  -create endpoint group identity that end point of recall.

  -create a rule to authorizzation reminding all work and element... in the end.

  Do you know if there is a faster way where another way to solve the problem?

  Thank you all

  Well, mab in some environments, could be replaced by profiling and for rules, rather af with a rule authz for each floor, you can name your VLAN in your eponymous switches to "Printers", in the world, then you would only need an authz rule, where you use the name of the vlan instead of identification number, so no matter where this printer , it will end in the vlan 'Printer', whatever it is in this specific switch.

• ISE - authentication radius AAA for n access

  Hello

  I have configured the switches to use the ISE as a Radius Server to authenticate with, on the ISE, I configured an authentication strategy

  for the 'DNA' using the devices 'Wired' group that points to the source of identity AD to authenticate.

  All testing switches access connection we found 2 results:

  1.A domain user can connect to the switch as expected.

  2. each domain user that exists in the source of advertising identity can connect, this is an undesirable result.

  So I will try to find a way to restrict access to the ENAD to only a specific group belonging to the announcement, for example the group/OU

  of the IT_department only.

  I did not, would appreciate any ideas on how to achieve this.

  Switching configurations:

  =================

  AAA new-model

  !

  AAA authentication login default local radius group

  !

  ISE authentication policy

  ==================

  !

  Policy name: DNA authentication

  Condition: ": a device Type equal to: all Types of devices #Wired.

  Authorized Protocol: default network access

  Use the identity source: AD1

  !

  No problem is how to set up policies, don't forget to evaluate any useful comments when you are finished testing.

  Thank you

  Tarik admani

• ISE with WLC AND switches

  Hello

  We run 3xWLC controller with 800 AP using ISE 1.2 for authentication wireless 802. 1 x. I was looking in the config of the ISE and notice of 400 edge cheating only 2x2960s are configured with 802. 1 x (ISE RADIUS config) and SNMP and only 2 of the port is 2 ap tie with swtich remaining ports.and the 3XWLC in network devices.

  I do not understand how an access point is to do this work (802.1 x) because it is location on different site and people are connecting to various different locations. ISE almost run/do 11 876 profiled ends.

  version 12.2
  !
  boot-start-marker
  boot-end-marker
  !
  enable secret 5 $1$ fokm$ lesIWAaceFFs.SpNdJi7t.
  !
  Test-RADIUS username password 7 07233544471A1C5445415F
  AAA new-model
  Group AAA dot1x default authentication RADIUS
  Group AAA authorization network default RADIUS
  Group AAA authorization auth-proxy default RADIUS
  start-stop radius group AAA accounting dot1x default
  start-stop radius group AAA accounting system by default
  !
  !
  !
  !
  AAA server RADIUS Dynamics-author
  Client 10.178.5.152 server-key 7 151E1F040D392E
  Client 10.178.5.153 server-key 7 060A1B29455D0C
  !
  AAA - the id of the joint session
  switch 1 supply ws-c2960s-48 i/s-l
  cooldown critical authentication 1000
  !
  !
  IP dhcp snooping vlan 29,320,401
  no ip dhcp snooping option information
  IP dhcp snooping
  no ip domain-lookup
  analysis of IP device
  !
  logging of the EMP
  !
  Crypto pki trustpoint TP-self-signed-364377856
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 364377856
  revocation checking no
  rsakeypair TP-self-signed-364377856
  !
  !
  TP-self-signed-364377856 crypto pki certificate chain
  certificate self-signed 01
  30820247 308201B 0 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
  69666963 33363433 37373835 36301E17 393330 33303130 30303331 0D 6174652D
  305A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
  532D 5365 6C662D53 69676E65 642D 4365 72746966 69636174 652 3336 34333737
  06092A 86 4886F70D 01010105 38353630 819F300D 00308189 02818100 0003818D
  B09F8205 9DD44616 858B1F49 A27F94E4 9E9C3504 F56E18EB 6D1A1309 15C20A3D
  31FCE168 5A8C610B 7F77E7FC D9AD3856 E4BABDD1 DFB28F54 6C24229D 97756ED4
  975E2222 939CF878 48D7F894 618279CF 2F9C4AD5 4008AFBB 19733DDB 92BDF73E
  B43E0071 C7DC51C6 B9A43C6A FF035C63 B53E26E2 C0522D40 3F850F0B 734DADED
  02030100 01A 37130 03551 D 13 6F300F06 0101FF04 05300301 01FF301C 0603551D
  11041530 13821150 5F494D2B 545F5374 61636B5F 322D312E 301F0603 551D 2304
  18301680 1456F3D9 23759254 57BA0966 7C6C3A71 FFF07CE0 A2301D06 03551D0E
  04160414 56F3D923 75925457 BA09667C 6C3A71FF F07CE0A2 2A 864886 300 D 0609
  F70D0101 5B1CA52E B38AC231 E45F3AF6 12764661 04050003 81810062 819657B 5
  F08D258E EAA2762F F90FBB7F F6E3AA8C 3EE98DB0 842E82E2 F88E60E0 80C1CF27
  DE9D9AC7 04649AEA 51C49BD7 7BCE9C5A 67093FB5 09495971 926542 4 5A7C7022
  8D9A8C2B 794D99B2 3B92B936 526216E0 79 D 80425 12B 33847 30F9A3F6 9CAC4D3C
  7C96AA15 CC4CC1C0 5FAD3B
  quit smoking
  control-dot1x system-auth
  dot1x critical eapol
  !
  pvst spanning-tree mode
  spanning tree extend id-system
  No vlan spanning tree 294-312,314-319,321-335,337-345,400,480,484-493,499,950
  !
  !
  !
  errdisable recovery cause Uni-directional
  errdisable recovery cause bpduguard
  errdisable recovery cause of security breach
  errdisable recovery cause channel-misconfig (STP)
  errdisable recovery cause pagp-flap
  errdisable recovery cause dtp-flap
  errdisable recovery cause link-flap
  errdisable recovery cause FPS-config-incompatibility
  errdisable recovery cause gbic-invalid
  errdisable recovery cause psecure-violation
  errdisable cause of port-mode-failure recovery
  errdisable recovery cause dhcp-rate-limit
  errdisable recovery cause pppoe-AI-rate-limit
  errdisable recovery cause mac-limit
  errdisable recovery cause vmps
  errdisable recovery cause storm-control
  errdisable recovery cause inline-power
  errdisable recovery cause arp-inspection
  errdisable recovery cause loopback
  errdisable recovery cause small-frame
  errdisable recovery cause psp
  !
  internal allocation policy of VLAN ascendant
  !
  !
  interface GigabitEthernet1/0/10
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard

  interface GigabitEthernet1/0/16
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
   
  interface GigabitEthernet1/0/24
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
   
  !
  interface GigabitEthernet1/0/33
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
   
  interface GigabitEthernet1/0/34
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface GigabitEthernet1/0/44
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard

  !
  interface GigabitEthernet1/0/46
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard

  interface GigabitEthernet1/0/48
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface GigabitEthernet1/0/49
  Description link GH
  switchport trunk allowed vlan 1,2,320,350,351,401
  switchport mode trunk
  MLS qos trust dscp
  IP dhcp snooping trust
  !

  interface GigabitEthernet1/0/52
  Description link CORE1
  switchport trunk allowed vlan 1,2,29,277,278,314,320,401
  switchport mode trunk
  MLS qos trust dscp
  IP dhcp snooping trust
  !
  !
  interface Vlan320
  IP 10.178.61.5 255.255.255.128
  no ip-cache cef route
  no ip route cache
  !
  default IP gateway - 10.178.61.1
  IP http server
  IP http secure server
  IP http secure-active-session-modules no
  active session modules IP http no
  !
  !
  Access IP extended ACL-AGENT-REDIRECT list
  deny udp any any domain eq bootps
  permit tcp any any eq www
  permit any any eq 443 tcp
  IP extended ACL-ALLOW access list
  allow an ip
  IP access-list extended by DEFAULT ACL
  allow udp any eq bootpc any eq bootps
  allow udp any any eq field
  allow icmp a whole
  allow any host 10.178.5.152 eq 8443 tcp
  permit tcp any host 10.178.5.152 eq 8905
  allow any host 10.178.5.152 eq 8905 udp
  permit tcp any host 10.178.5.152 eq 8906
  allow any host 10.178.5.152 eq 8906 udp
  allow any host 10.178.5.152 eq 8909 tcp
  allow any host 10.178.5.152 eq 8909 udp
  allow any host 10.178.5.153 eq 8443 tcp
  permit tcp any host 10.178.5.153 eq 8905
  allow any host 10.178.5.153 eq 8905 udp
  permit tcp any host 10.178.5.153 eq 8906
  allow any host 10.178.5.153 eq 8906 udp
  allow any host 10.178.5.153 eq 8909 tcp
  allow any host 10.178.5.153 eq 8909 udp
  refuse an entire ip
  Access IP extended ACL-WEBAUTH-REDIRECT list
  deny ip any host 10.178.5.152
  deny ip any host 10.178.5.153
  permit tcp any any eq www
  permit any any eq 443 tcp

  radius of the IP source-interface Vlan320
  exploitation forest esm config
  logging trap alerts
  logging Source ip id
  connection interface-source Vlan320
  record 192.168.6.31
  host 10.178.5.150 record transport udp port 20514
  host 10.178.5.151 record transport udp port 20514
  access-list 10 permit 10.178.5.117
  access-list 10 permit 10.178.61.100
  Server SNMP engineID local 800000090300000A8AF5F181
  SNMP - server RO W143L355 community
  w143l355 RW SNMP-server community
  SNMP-Server RO community lthpublic
  SNMP-Server RO community lthise
  Server SNMP trap-source Vlan320
  Server SNMP informed source-interface Vlan320
  Server enable SNMP traps snmp authentication linkdown, linkup cold start
  SNMP-Server enable traps cluster
  config SNMP-server enable traps
  entity of traps activate SNMP Server
  Server enable SNMP traps ipsla
  Server enable SNMP traps syslog
  Server enable SNMP traps vtp
  SNMP Server enable traps mac-notification change move threshold
  Server SNMP enable traps belonging to a vlan
  SNMP-server host 10.178.5.152 version 2 c lthise mac-notification
  SNMP-server host 10.178.5.153 version 2 c lthise mac-notification
  !
  RADIUS attribute 6 sur-pour-login-auth server
  Server RADIUS attribute 8 include-in-access-req
  RADIUS attribute 25-application access server include
  dead-criteria 5 tent 3 times RADIUS server
  test the server RADIUS host 10.178.5.152 auth-port 1812 acct-port 1813 username test-RADIUS 7 key 03084F030F1C24
  test the server RADIUS host 10.178.5.153 auth-port 1812 acct-port 1813 username test-RADIUS 7 key 141B060305172F
  RADIUS vsa server send accounting
  RADIUS vsa server send authentication

  any help would be really appreciated.

  I'm not sure that completely understand the question; But if LSE is only political wireless, then none of the wired switches need any configuration of ISE.

  Access points tunnel all wireless traffic to the WLC on CAPWAP (unless you use FlexConnect). This is the configuration 802. 1 x on the WLC that implements policies defined in ISE.

  Switches wired never need to act as an access network (n) device and so do not need to be defined in ISE unless or until you want to apply policies of ISE for wired devices...

• ISE foreign CWA / deployment WLC - missing user of anchor names

  I'm not sure if this belongs to the section mobility or security - I'll just give it a try here.
  I've set up wireless access visitor with Cisco ISE 1.3 (patch 2) and a stranger WLC / anchor of deployment (7.6.130.0).
  So far almost everything works fine - but I probably have a problem with logging Cisco ISE.

  In exploitation forest 'authentications Live', I see the authentication successful, but the identity of the column, it shows just the MAC address of endpoint.
  If navigation to the identity store of endpoint endpoint of comments is in the right group (guestendpoints) and when you look at the details of the endpoint, I can see the "portalusername" who created the user.

  If I click on endpoints active view (see attachment), I can see all active clients (Authz profile "PermitAccess"). I guess the user name of the client must be filled out there as well, no?

  endpoint_view.PNG

  

  Someone has an idea what is the cause for this? Or is the normal behavior?

  My rules of authentication are:
  If "wireless_mab" and "RADIUS: Called-Station-ID ENDS WITH comments-SSID" then use "endpoints internal" and continue if "user not found".

  My authorization rules are:
  1.) if GuestEndpoints AND (Wireless_MAB AND RADIUS: Called-Station-ID ENDS_WITH Guest SSID) then PermitAccess
  2.) if (Wireless_MAB AND RADIUS: Called-Station-ID ENDS_WITH Guest SSID) then GUEST_WEBAUTH
  The profile GUEST_WEBAUTH Authz defined the CWA and preauthentication ACL for the WLC

  The WLC I just configured the WLC foreign with the RADIUS (ISE) server and active authentication MAC the SSID.
  All parameters such as aaa-override and RADIUS of the NAC are defined. The defined RADIUS is set on "settler" to comply with the ISE

  According to my experience, this is the expected behavior.  The new workflow for the use case of comments starting at the point 1.3 of the ISE typically includes registration of endpoint, you're.  Your strategy for authz for post-portail of authentication (after the certificate of authenticity) needs the MAC address to use as the identity for permissions invited, not the guest credentials used on the portal.

  That being said, I would like to be able to see the username of the user portal whenever a registered endpoint point authenticates (until it is served using endpoint political purges, of course).

  Tim

• ISE 1.2 rejects 5508 WLC RADIUS messages

  The setup of ref is:

  WLC 5508 HA pair running 7.6 talk with ISE 1.2 patch 7 (a 6).

  Wireless users are authenticated very well, so the 5508 is a valid n in ISE, but...

  When I install active RAY of relief, so that the WLC can query the ISE Server I get the message:

  "The query a device no RADIUS wireless was interrupted because the installed license is for wireless devices only.

  Why the ISE spend a RADIUS of a WLC message which is a wireless device?  It is certainly a mistake?

  Hi Nicolas,.

  This is a known fault.

  CSCug34679    ISE drop keep alive from WLC.

  Symptom:
  ISE drops keep living authentications from the WLC, with message 11054 request from a device no wireless because of the license installed wireless.
  Conditions:
  When only licensed wireless is installed on the ISE and use current keep alive on the WLC.
  Workaround solution:
  Passive use keep alive on the WLC and non-active.

  Kind regards

  Jatin kone

  * Make the rate of useful messages *.

• Rules of the authz in ISE 1.2 Max?

  Hi all

  Is there any doco on what the current limit of rules Auth Z in ISE 1.2

  I read 1.1.x had a limit of 140 authz rules.

  I also consider the political use sets whether this increases the total authZ rules.

  See you soon

  Peter,

  Here are the numbers for the version 1.1.x and 1.2.  I hope this helps.

  * ISE 1.1.x

  # ISE 1.2

  Authentication policy rules

  * 50

  # 400

  Conditions by the rule of the order of AuthC

  u

  # 8

  Rules of authorization policy

  * 140

  # 600

  Identity authorization groups

  * 20

  # 1000

  Conditions by AuthZ policy rule

  * 6

  # 8

  Authorization profiles

  * 30

  # 600

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• ISE AD search fails

  I have a problem with a consultation AD that makes me nuts.

  We use maschine certificates for authentication and the ad groups for authorization policies.

  We have no problem with Windows devices.

  Now, we try to include a device Apple OS X (native "supplicant") and it does not work.

  The validation of certificates is successful, but subsequently the ISE tries a search AD for a user with the name of maschine instead of a search maschine.

  The only difference in the RADIUS request is the user-name RADIUS.

  In the case of Windows, it's like host/maschine and in the case of OS X, the host is missing.

  So my guess is that the host / part is necessary by ISE to hired demand authentication maschine.

  The problem that I can't find a way to force the supplicant to OS X to add this part of ist.

  Can anyone give me a tip how to set up the begging of OS X properly?

  The problem is caused by the Windows client adds a "host /" in front of the name on the certificate and the Macintosh client does not work. This is a problem with MAC clients during the eap - tls machine authentication.

  One of my colleague created a doc for the same thing, please go to the doc and check if this may help.

  https://supportforums.Cisco.com/docs/doc-15477

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• First successful authorization ISE and then failure (MAB)

  Hello

  ISE 1.1.1 and switch using 3650 12.2 (55) SE6.

  I have a client (computer) that needs to be authenticated with MAB and then to the port of the switch must be asigned a DACL and VLAN 90 list. I get

  'Authorization successful' but directly after it fails and I cannot understand why. ISE shows only the authentication successful under "Authenticaions Live".

  As you can se the rating below 802. 1 x fails, as it should be, and then pass the MAB, conditioned the VLAN and then fails:

  0002SWC002 (config) #int fa0/13

  0002SWC002(Config-if) #shut

  0002SWC002(Config-if) #.

  7 jan 13:26:59.640: % LINK-5-CHANGED: Interface FastEthernet0/13, changed state down administratively

  7 jan 13:27:00.647: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state down

  0002SWC002(Config-if) #no close

  0002SWC002(Config-if) #.

  7 jan 13:27:19.689: % LINK-3-UPDOWN: Interface FastEthernet0/13, changed State to down

  7 jan 13:27:22.063: % LINK-3-UPDOWN: Interface FastEthernet0/13, changed State to

  7 jan 13:27:22.776: % AUTHMGR-5-START: start "dot1x' for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0A0005FC00000

  020D7C192D1

  7 jan 13:27:23.070: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed State to

  7 jan 13:27:51.054: % DOT1X-5-FAIL: failure of authentication for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID

  7 jan 13:27:51.054: % AUTHMGR-7-RESULT: authentication result in 'no response' of 'dot1x' for the customer (f04d.a223.8f43) on the Interface

  0/13 AuditSessionID 0A0005FC00000020D7C192D1

  7 jan 13:27:51.054: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0

  A0005FC00000020D7C192D1

  7 jan 13:27:51.054: % AUTHMGR-5-START: start "mab" for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0A0005FC0000002

  0D7C192D1

  7 jan 13:27:51.088: % MAB-5-SUCCESS: authentication successful for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID A 0, 0005

  FC00000020D7C192D1

  7 jan 13:27:51.088: % AUTHMGR-7-RESULT: result of the authentication 'success' of 'mab' for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0A0005FC00000020D7C192D1

  7 jan 13:27:51.088: % AUTHMGR-5-VLANASSIGN: 90 VLAN assigned to the Interface Fa0/13 AuditSessionID 0A0005FC00000020D7C192D1

  7 jan 13:27:51.096: % EMP-6-POLICY_REQ: IP 0.0.0.0. MAC f04d.a223.8f43 | AuditSessionID 0A0005FC00000020D7C192D1 | AUTHTYPE DOT1X | EVENTS APPLY

  7 jan 13:27:51.096: % EMP-6-IPEVENT: IP 0.0.0.0. MAC f04d.a223.8f43 | AuditSessionID 0A0005FC00000020D7C192D1 | AUTHTYPE DOT1X | EVENT

  IP-WAIT

  7 jan 13:27:51.255: % AUTHMGR-5-SUCCESS: authorization succeeded for client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID A 0, 00

  05FC00000020D7C192D1

  7 jan 13:27:52.027: % EMP-6-IPEVENT: IP 10.90.5.1 | MAC f04d.a223.8f43 | AuditSessionID 0A0005FC00000020D7C192D1 | AUTHTYPE DOT1X | ACE double entry of IP-ASSIGNMENTReplacing EVENT for the host 10.90.5.1

  7 jan 13:27:52.036: % AUTHMGR-5-FAIL: failed authorization for customer (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0A0005FC00

  000020D7C192D1

  7 jan 13:27:52.036: % EMP-6-POLICY_REQ: IP 10.90.5.1 | MAC f04d.a223.8f43 | AuditSessionID 0A0005FC00000020D7C192D1 | AUTHTYPE DOT1X | REMOVAL OF THE EVENT

  After that the process starts all over again.

  It is the switch port configuration:

  interface FastEthernet0/13

  Description data/VoIP

  switchport mode access

  switchport voice vlan 20

  switchport port-security

  security violation restrict port switchport

  IP access-group ACL-LEAVE in

  SRR-queue bandwidth share 1 70 25 5

  3 SRR-queue bandwidth shape 0 0 0

  priority queue

  authentication event fail following action method

  action of death event authentication server allow voice

  the host-mode multi-auth authentication

  open authentication

  authentication order dot1x mab

  authentication priority dot1x mab

  Auto control of the port of authentication

  MAB

  added mac-SNMP trap notification change

  no link-status of snmp trap

  dot1x EAP authenticator

  dot1x tx-time 10

  Storm-control broadcasts 2.00 1.00

  Storm-control level multicast 2.00 1.00

  stop storm-control action

  Storm-control action trap

  spanning tree portfast

  service-policy input ax-qos_butnet

  IP dhcp snooping limit 5 speed

  end

  Is there a problem with the client (computer) or ISE/switch?

  No problem of Phillip,

  Ultimately you want to leave the entries in the source for the dACL set with one, because the switch will replace those with the source ip address that he draws from the analysis of ip device.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Open authentication failure

  Is it far from stop the port to authenticate when a device does not open. I'm trying to implement mode low impact a network cable. And I have some terminal WYSE I want to authenticate to the network, so I only their failure opened with an ACL restricting their access. However, the ongoing switch to try to authenticate the device even if there is no authentication. This is originally my logs on ISE fill of false authentication failures. Is there a way to limit these errors or the switchport trying to authenticate again? Here is the config switchport.

  switchport access vlan 33

  switchport mode access

  switchport voice vlan 233

  IP access-group ACL by DEFAULT in

  event of failure retry 1 action next-method of authentication

  action of death event authentication server allow vlan 33

  living action of the server reset the authentication event

  the host-mode multi-auth authentication

  open authentication

  authentication order dot1x mab

  authentication priority dot1x mab

  Auto control of the port of authentication

  Server to authenticate again authentication timer

  restrict the authentication violation

  MAB

  dot1x EAP authenticator

  dot1x tx-time 10

  spanning tree portfast

  Hi Nicolas,.

  You can configure a restricted VLAN using the command "action event authentication failure allows vlan (number)" and limit access to this vlan using the ACL.

  You can make a reference to

  http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_58_se/configuration/guide/sw8021x.html#wp1179086 for more information.

  HTH,

  Kind regards

  Kush

• Use an external radius server in a different ISE ISE

  Hello

  This is the scenario: three companies are part of a business, we want to authenticate users through 802.1 x, there are 3 Active Directory and Cisco 3 ISE.

  Is not possible to join in a forest or 'connect' Active Directory.

  This:

  [email protected] / * / --> WLC company B--> EHT--> radius_connection --> ISE company B company has--> [email protected] / * /

  Is this possible?

  Thank you!

  Yes, it is called radius proxy. You can create separate authentication rules, that match name field to your user name, and send the request to the appropriate server to ISE.

  In ISE, it is the authentication policy and the sequence of radius server with which you work

• MAR machine access restrictions

  Hello

  I'm like to identify peripheral societies against BYOD.  So, I'm using "WasMachineAuthenticated" State, this is my config:

  ISE 1.3 Patch 3

  Windows 7 with Machine and user auth supplicant.  With the help of the PEAP Protocol.

  I have Machine Auth and auth User policy.

  In the external identity Sources, MAR is enabled with 192 hours aging time.

  Lately, I read this topic, and I came across several comments on some reserves.  What are these warnings?

  Everyone has implementied successfully this feature?  BTW, for me the chaining of EAP is not an option.

  Thank you!

  Tony

  Hi Tony -.

  Yes, MAR comes with many limitations and traps and therefore, I highly recommend that avoid you it. I posted this issue in previous discussions. Take a look at the following links and let me know if you have any other questions:

  http://www.Cisco.com/c/en/us/support/docs/LAN-switching/8021x/116516-problemsolution-technology-00.html

  https://supportforums.Cisco.com/discussion/12209441/Cisco-ISE-machine-failed-machine-authentication

  https://supportforums.Cisco.com/discussion/11639846/machine-authentication-not-working-after-workstation-unattented-OVR-night-ISE

  If the EAP chaining is not an option, then you have other options:

  1. you can use the profiling and using the class identifier DHCP to distinguish Corp. machines vs non-corporate

  2. you can use the evaluation of posture and the NAC agent looking for some hidden file or registry that have only machines (both the file and registry can be pushed via GPO)

  3. you can also perform authentication to be 'Only Machine' this will prevent non-domaine joined machines to authenticate

  I hope this helps!

  Thank you for evaluating useful messages!

• Dissociated MAC Client timeout

  G ' Day all,

  Can anyone tell if I am able to change the time it takes for a MAC address is allowed out of the WLC customers dissociated. Clients on the interface page graphic it looks to be about 5 minutes so I think it is 300 seconds as the clock of arp table standard. I would change it if possible.

  Here's why:

  I have a wireless network that uses ISE to the machine authentication and posture of wireless devices. If a customer dissociates and re - partner without going through the entry of the client in the empty manually, WLC NAC agent don't postural again the wireless device.

  This seems to be the entry of the client in the WLC is in a RUNNING State, so if the re-associates, the last known state is RUN, then he joined just the customer upwards and the posture of the NAC is not finished.  This is a reproducible behavior.

  If the customer dissociates and clear manually the customer to enter the WLC, the customer may re-associate and focuses, as expected.

  I need to be able to configure this solution so that whenever the client is associated, regardless of the speed with which he associated after dissociation, the posture of the NAC process occurs.

  Any help is greatly appreciated.

  Thank you.

  JS

  To remove the client from the executing State, the timer of the session or the idle timer expires.  The inactivity timer is usually what happens to expire first.  The default value for the inactivity timer is also 300 seconds.

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• TrustSec and SXP

  Hello world

  I am trying to fully understand the trustsec technology and things get confusing... so I ask a little help :)

  Feel free to correct me if I'm wrong (it's the point indeed).

  I have the following architecture to implement:

  • ISE / AD (classification)
  • ASA (application)
  • SGT-compatible switches
  • WLC (non - SGT capable)

  From what I understood, ISE is the first authentication (classification) and returns the tag SGT switches. Allow that the switches to mark the entry correctly (spread) before coming to the execution (which will be made by ASA firewall).

  But what I don't understand is how the WLC is ISE tags? He is not capable, SGT, so it does not work with the SXP peering as a speaker. So he can send the right mapping tables (Sgt ip)? How can he card nothing if it cannot receive tags authentication ISE (saying that the user is in SGT 'employee' for example)? It should only be static mapping to WLC (then yes ok but trustsec starts becoming useless...)?

  I'm really confused, so I guess I misunderstood the principle of trustsec...

  Thank you very much for reading and if you can help.

  Best regards

  Basile

  When a wireless client connects to the network as part of the policy of auth is also give to Sgt the WLC as speaker SXP will transmit the SGT intellectual property mapping the SXP listener. the listener is entered the package on behalf of the WLC SGT.

  I hope that makes sense. It's confusing :)