ISE AD search fails

Similar Questions

• It's what I get everytime I try to search using the box on the start menu search failed to initialize.

  It's what I have whenever I try to use the box of departure/Chantal search failed to initialize.  The research won't do anything except say failure to initialize.  I tried to "msconfig", but nothing happens.  Is there another way to get around this?
  Mary G.

  Try this fix:

  Reset to the default Windows search
  http://blogs.technet.com/b/fixit4me/archive/2009/04/24/reset-Windows-search-to-defaults.aspx

• Jabber Video (Movi) always showed "search failed: Server error.

  Hi, Experts

  I have install X7.2 VCS, 13.2 TMSPE, I install the 'putting into service Phone Book' by 'Supply' and marked the group in access control, but the always shown video (Movi) Jabber client ' search failed: Server error "when I search contact.

  This is because your default subfield is configured with the setting "do not verify the credentials" authentication.

  Presence and directories to work properly, the default subfield must be configured as "Powers to check" (which is the safest) or "Treat as authenticated".

  Please see

  http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7-2.pdf for more information on authentication devices and authentication for areas rules.

  -Andreas

• DNS search fails, how to fix?

  I have intermittent success connecting to internet Explorer.  When I can I and try to make a link to another site I almost always get a message on the DNS service has failed or cannot connect.  I have Norton anti-virus and wonder if it is connected to a firewall? Any ideas / solutions gratefully received as it drives me crazy!

  Hi Ele_756,

  I suggest you clear the DNS cache and see if that fixes the problem. Clear the DNS cache forces DNS to query a DNS server rather than using the information stored in the cache.

  Follow these steps:

  a. click on the button 'start '.

  (b) in the search box, type "command prompt".

  c. in the list of results, right-click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns

  e. then type ipconfig/registerdns , and then press enter

  That should do it!

  If the method above is not enough, you can communicate with the Internet (FSI) Service provider.

  Hope this information helps.

• Windows search failed

  I can't search in Windows Vista. I get the error "failed to initialize Search".

  Hi Mommy_of_2,

  Yes, you can check if everything works as expected in safe mode and let me know

  Step 1: Check with a different user profile

  If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Knots of ISE primary administration failed

  Hi all

  I'll put 3 ISE with deployment of creation, 1 ISE will be configured as Administration node & analysis and others as Service strategy node dedicated.

  My questions are:

  1. If the Administration & monitoring node does not, are authentication, authorization and posture can still run on the client?

  2 promote the node for Service strategy dedicated under the new administration & monitoring nodes? If possible, how the procedure for promotion? It's as simple as promoting the secondary nodes (in case we have primary and secondary nodes) or there are has other efforts, such as needs to restore the database or etc?

  Thank you?

  Kind regards

  Rian

  Hello

  When the primary administration node fails. The ssnp will continue always to operate and implement strategies.

  Since you have a single administration node and if the node must be rebuilt, all other nodes must also be returned to the factory then re registered once the primary node is ready again.

  In this case, you can open a tac case yo have them help make your database to one of the nodes of the psn.

  As always, it's my comments and what I would do if I was in the situation, we can wait a cisco engineer to respond or you can post this question in a tac case to make sure there isn't a future feature that deals with this scenario.

  Sent by Cisco Support technique Android app

• UPnP search fails when adding Xbox 360 Media Center Extender

  First of all, I spent a week looking for a solution to this so if I missed something obvious, I apologize.

  My xbox has been connected as a media center extender to this combination of the computer and the router for several months now. The router is a WII-HP-G300NH Buffalo. Earlier this week the media center extender was having video playback problems. After restarting the computer, the Extender was is no longer connected.

  When I try to add a new extension unit I get the message "unable to add extender. Microsoft says to activate upnp and multicast. Check. Reflashed firmware dd - wrt. No luck. Back to buffalo firmware. No luck. Try an old Linksys WRT54GL I hang out. No luck.

  The event recorder has this error: "Media Center Extender Setup has failed as the Extender has been detected on the network unsuccessfully searching for UPnP for the Extender (timed out after 20000ms)." Event ID: 538

  Now, I did everything I could find on the activation of network discovery, anything allowing to access media and these. Network and sharing Center is located about large open. I also tried switching between home and work networks.

  That said, I decided to check and see what updates have been installed. It turns out that an update has been applied on the day, that I started to have problems. It is said that it can not be uninstalled. Description Windows 7 and Windows Server 2008 R2 installation software item updated

  Note: I have no system restore points. Small SSD and has not taken the time to understand how to save elsewhere.

  That's all the information I have. I convinced myself that it is not the router via the steps described above and that it is something to do with the computer. Help?

  FIXED.

  Reinstalled NIC drivers.

• Agreement of partner search failed from the trading partner cannot be I

  Hello
  
  I send 850 EDI XML to our partner Penske, its throwing below error. Could someone helpme how to solve this problem. Please do the needful.
  
  our sender id is EMR and receiver id is Penske (I enclose also a file which I am processing)
  
  News of the machine: (essapt020 - u009.emrsn.com)
  Description: To ensure that the trading partner's name, type and value information
  StackTrace:
  Error -: AIP-50548: partner search agreement failed from the trading partner cannot be identified
  at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:199)
  at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:589)
  at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:221)
  at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1061)
  at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
  at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:903)
  at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:317)
  
  
  File which I have dealt
  
  <? XML version = "1.0"? >
  -transaction-850 xmlns = "urn: oracle: integration: b2b:BD5A9C92A91F474292233E610E5258F9" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" XDataVersion = "1.0" Standard = 'X 12' Version = "V4010' CreatedDate =" "2009-09 - 14 T 06: 20:48" CreatedBy = "ECXEngine_837" GUID = "{3A6795B0-F6A0-DE11-B354-00144F86C7D4}" > "
  -Properties - internal >
  -< name of data structures 'Interchange' = >
  < search name = "InterchangeSenderQual" > ZZ < / research >
  < search name = "InterchangeSenderID" > EMR < / research >
  < search name = "InterchangeReceiverQual" > ZZ < / research >
  < search name = "InterchangeReceiverID" > Penske < / research >
  < search name = "InterchangeControlVersion" > 00401 < / research >
  < name search = 'Standard' > X 12 < / research >
  < property Name = "InterchangeAuthorizationInfoQual" > 00 < / property >
  < property Name = "InterchangeAuthorizationInfo" / >
  < property Name = "InterchangeSecurityInfoQual" > 00 < / property >
  < property Name = "InterchangeSecurityInfo" / >
  < property Name = "InterchangeSenderQual" > ZZ < / property >
  < property Name = "InterchangeSenderID" > EMR < / property >
  < property Name = "InterchangeReceiverQual" > ZZ < / property >
  < property Name = "InterchangeReceiverID" > Penske < / property >
  < property Name = "InterchangeDate" > 090909 < / property >
  < property Name = "InterchangeTime" > 1419 < / property >
  < property Name = "InterchangeControlStandard_RepeatingSeparator" > U < / property >
  < property Name = "InterchangeControlVersion" > 00401 < / property >
  < property Name = "InterchangeControlNumber" > 000085390 < / property >
  < property Name = "InterchangeAckRequested" > 0 < / property >
  < property Name = "InterchangeUsageIndicator" > P < / property >
  < property Name = "InterchangeComponentElementSep" > 0x3e < / property >
  < property Name = "DecimalSeparator" / >
  < property Name = "ElementDelimiter" > 0x2a < / property >
  < property Name = "ReleaseCharacter" / >
  < property Name = "RepeatingSeparator" / >
  < property Name = "SegmentDelimiter" > 0x7e < / property >
  < property Name = "SubelementDelimiter" > 0x3e < / property >
  < property Name = "InterchangeChildCount" > 1 < / property >
  < property Name = "InterchangeTrailerControlNumber" > 000085390 < / property >
  -< name of data structures 'Group' = >
  < search name = "GroupSenderID" > EMR < / research >
  < search name = "GroupReceiverID" > Penske < / research >
  < search name = "GroupVersionNumber" > 004010 < / research >
  < property Name = "GroupID" > IN. < / property >
  < property Name = "GroupSenderID" > EMR < / property >
  < property Name = "GroupReceiverID" > Penske < / property >
  < property Name = "GroupDate" > 20090909 < / property >
  < property Name = "GroupTime" > 1419 < / property >
  < property Name = "GroupControlNumber" > 85364 < / property >
  < property Name = "GroupAgencyCode" > X < / property >
  < property Name = "GroupVersionNumber" > 004010 < / property >
  < property Name = "GroupChildCount" > 1 < / property >
  < property Name = "GroupTrailerControlNumber" > 85364 < / property >
  -< name of data structures = 'Transaction' >
  < search name = "TransactionID" > 850 < / research >
  < property Name = "TransactionID" > 850 < / property >
  < property Name = "TransactionControlNumber" > 0001 < / property >
  < property Name = "TransactionImplementationReference" / >
  < property Name = "TransactionChildCount" > 24 < / property >
  < property Name = "TransactionTrailerControlNumber" > 0001 < / property >
  < / data structures >
  < / data structures >
  < / data structures >
  < / internal properties >
  -segment-ST >
  < item-143 > 850 < / item-143 >
  < item-329 > 0001 < / 329 item >
  < / segment-ST >
  -segment-BEG >
  < 00 > element-353 < / 353 item >
  HIS 92 < item > < / item-92 >
  < item-324 > 16010055985 < / 324 item >
  < item-328 xsi: Nil = "true" / >
  < item-373 > 20090909 < / item-373 >
  < item-367 xsi: Nil = "true" / >
  AC < element-587 > < / 587 item >
  < item-1019 xsi: Nil = "true" / >
  < item-1166 xsi: Nil = "true" / >
  < item-1232 xsi: Nil = "true" / >
  < item-786 > 03 < / 786 item >
  < / segment-BEG >
  -segment-NEWS >
  < item-98 > 2L < / item-98 >
  USD < element-100 > < / item-100 >
  < / segment-CUR >
  -segment-REF >
  < item-128 > 06 < / item-128 >
  < item-127 xsi: Nil = "true" / >
  < item-352 > ALICE.EMRSN.COM:oracle.apps.po.event.xmlpo:458153 - 325924 < / 352 item >
  < / segment-REF >
  -segment-FAB >
  < Item-146 > CC < / 146 item >
  ZZ < element-309 > < / item-309 >
  < item-352 > UCC FOB DEST COL < / 352 item >
  < item-334 xsi: Nil = "true" / >
  < item-335 xsi: Nil = "true" / >
  ZZ < element-309_1 > < / item-309_1 >
  < Element-352_1 > FOB shipping point < / item-352_1 >
  < / segment-FAB >
  -segment-ITD >
  < item-336 xsi: Nil = "true" / >
  < item-333 xsi: Nil = "true" / >
  < item-338 xsi: Nil = "true" / >
  < item-370 xsi: Nil = "true" / >
  < item-351 xsi: Nil = "true" / >
  < item-446 xsi: Nil = "true" / >
  < item-386 xsi: Nil = "true" / >
  < item-362 xsi: Nil = "true" / >
  < item-388 xsi: Nil = "true" / >
  < item-389 xsi: Nil = "true" / >
  < item-342 xsi: Nil = "true" / >
  NET75 < element-352 > MOE < / 352 item >
  < / segment-ITD >
  -loop-N1 >
  -segment-N1 >
  < Item-98 > VN < / item-98 >
  XPEDX < element-93 > < / item-93 >
  < item-66 > U.S. < / item-66 >
  < item-67 > 160000511 < / item-67 >
  < / segment-N1 >
  -segment-N3 >
  CORPORATE DRIVE 44 < element-166 > 2099 < / item-166 >
  < / segment-N3 >
  -segment-N4 >
  FENTON < item-19 > < / item-19 >
  MO < element-156 > < / item-156 >
  < item 116 > 63026 < / item-116 >
  26 < element > U.S. < / item-26 >
  < / N4 segment >
  < / N1 loop >
  -loop-N1 >
  -segment-N1 >
  BT < element-98 > < / item-98 >
  < item-93 > EMC OR CIM < / item-93 >
  < / segment-N1 >
  -segment-N3 >
  < item-166 > Emerson Motor Company, < / item-166 >
  < element-166_1 > a Division of Emerson Electric Co. PO BOX 4147 < / item-166_1 >
  < / segment-N3 >
  -segment-N4 >
  St. Louis 19 < item > < / item-19 >
  MO < element-156 > < / item-156 >
  < item 116 > 63136 < / item-116 >
  26 < element > U.S. < / item-26 >
  < / N4 segment >
  < / N1 loop >
  -loop-N1 >
  -segment-N1 >
  < item-98 > YES < / item-98 >
  < item-93 > EMC OR CIM < / item-93 >
  < / segment-N1 >
  -segment-N3 >
  < item-166 > 8100 West in bloom Ave < / item-166 >
  C.p. < element-166_1 > 3946 < / item-166_1 >
  < / segment-N3 >
  -segment-N4 >
  St. Louis 19 < item > < / item-19 >
  MO < element-156 > < / item-156 >
  < item 116 > 63136 < / item-116 >
  26 < element > U.S. < / item-26 >
  < / N4 segment >
  < / N1 loop >
  -loop-N1 >
  -segment-N1 >
  CA < element-98 > < / item-98 >
  < item-93 > SEE EMERSON ROUTING < / item-93 >
  < / segment-N1 >
  < / N1 loop >
  -loop-PO1 >
  -segment-PO1 >
  < item-350 > 1 < / item-350 >
  < item-330 > 4800 < / item-330 >
  EA < element-355_1 > < / item-355_1 >
  < item-212 > 116 < / item-212 >
  < item-639 xsi: Nil = "true" / >
  < 235_1-element xsi: Nil = "true" / >
  < 234_1-element xsi: Nil = "true" / >
  SW < element-235_2 > < / item-235_2 >
  P062155530000 < element-234_2 > < / item-234_2 >
  < / segment-PO1 >
  -loop PID >
  -segment-PID >
  F < element-349 > < / 349 item >
  < item-750 xsi: Nil = "true" / >
  < item-559 xsi: Nil = "true" / >
  < item-751 xsi: Nil = "true" / >
  < item-352 > PAD (BOX) < / 352 item >
  < / segment-PID >
  < / PID loop >
  -loop-N1_2 >
  -segment-N1 >
  ST < element-98 > < / item-98 >
  IO < element-93 > CIM CMD factory < / item-93 >
  FA < element-66 > < / item-66 >
  INTERNALC01 < element-67 > < / item-67 >
  < / segment-N1 >
  -segment-N3 >
  < item-166 > Blvd Carlos Salinas Gortari < / item-166 >
  Kilometro < element-166_1 > 9.7 < / item-166_1 >
  < / segment-N3 >
  -segment-N4 >
  Apodaca < item-19 > < / item-19 >
  NL < element-156 > < / item-156 >
  < item 116 > 66600 < / item-116 >
  MX < item-26 > < / item-26 >
  < / N4 segment >
  -segment-SCH >
  < element-380_2 > 4800 < / item-380_2 >
  EA < element-355 > < / 355 item >
  < 98_1-element xsi: Nil = "true" / >
  < item-93 xsi: Nil = "true" / >
  < element-374_5 > 112 < / item-374_5 >
  < item-373 > 20090910 < / item-373 >
  < item-337 xsi: Nil = "true" / >
  < item-374 xsi: Nil = "true" / >
  < 373_1-element xsi: Nil = "true" / >
  < 337_1-element xsi: Nil = "true" / >
  < item-326 xsi: Nil = "true" / >
  < item-350 > 1 < / item-350 >
  < / segment-SCH >
  < / loop-N1_2 >
  < / loop-PO1 >
  -loop-CTT >
  -segment-CTT >
  < item-354 > 1 < / 354 item >
  < / segment-CTT >
  < / loop-CTT >
  -segment-SE >
  < item 96 > 24 < / item-96 >
  < item-329 > 0001 < / 329 item >
  < / segment-SE >
  < / transaction-850 >

  Hi Srinivas,

  I'm dilemaaa if I need to take an EDI x 12 on the internet and EDI x 12 via exchange genric.

  I think it's something that you should discuss with your TP and according to the availability and demand a decision must be rendered.

  If you use the FTP protocol in the internal delivery channel, then you must follow the file naming convention to provide information to identify the TP and B2B transactions. For this, you can consult-

  http://www.b2bgurus.com/search/label/generic%20File

  To learn more about the identification of TP in EDI, please see-

  http://www.b2bgurus.com/2007/08/trading-partner-identification-in-EDI.html

  Kind regards
  Anuj

• 5.1 Windows search fails to find files

  I keep the images in folders by year like 2008.  Looking for a 2008 find nothing.  This folder is located on the backup drives: F: and G:, H:, but Windows Search does not find it.  Nor it is images in the folder.  That is what it is?  How can I force a re-indexing?

  Thanks, Imran.  I discovered a right click on the magnifying glass icon.  I re-indexed and it worked.  I appreciate your help.

• Windows Vista - search failed to initialize?

  Hi all. I went to my computer the other day and when I typed in the search bar, it is said 'Search cannot initialize' and basically refuses to get anything. I tried a few solutions, but these come short to half way through the tutorial because of a few things.

  One person said 'research', which of course cannot be searched via the start menu because that's the problem! Laughing out loud. I can't find anything.
  Another step that I saw in a different tutorial says to restart the index or something involving to go into Control Panel, then system and maintenance, but when I go into the system and maintenance, there is nothing to find. It says "There are no items to display." So, basically, system and maintenance is empty.
  Then recently, I found this: http://support.microsoft.com/mats/windows_search?wa=wsignin1.0
  Who is supposed to be an automatic problem specially for my problem solver (I thought it wouldn't work, but thought why not give it a try?)
  He ran last night and he seemed to take quite some time, so I let him do his thing of the day after. I go back to the computer, and he claims that all problems have been resolved. It fixed problems related to coding, windows search not start, restart windows search, windows search does not search, etc.. Large. Very well. So, I'll test this claim out and find that it has not fixed all the. I get the same exact error message when trying to search for anything.
  So, please, help me on this. Is there a way to solve this annoying problem? Having no research on your system, it's like having no google on the internet. It's just debilitating. And it takes forever to find everything manually. I also tried restoring system to go to an earlier point in time, BING, another problem. There is only a single restore point - which was an update of windows. I restored to that but it solves nothing, and when I return to the system restore, it is right back in the restore points, so I guess that windows automatically updates right after the update is cancelled. With the point of not more than a restoration to return, (which will not solve the problem), I fear of system restore is out of the question as well.
  ANY HELP? Thank you

  Hey I solved the problem by rebuilding the index.

  To remove and recreate the search index:

  1. ReachControl Panel
  2. SelectIndexing Options
  3. Click on Advanced (this will open the Advanced Options dialog box)
  4. Select it Rebuild button.

  Don't forget that I had to click on "Classic Mode" before to do because the modern version would not display all items. Some may not have this extra step, but I had to. I am writing just so that anyone else having this problem can see how to fix it! Thanks for your help, if!
  -Bobby

• Windows search fails to find the files in the Documents folder

  Original title: Windows 7 search finds no files, even though all the settings have been verified and the search index has been rebuilt

  I recently bought a new Dell laptop Studio 1558 with Windows 7 Home Premium and moved through several hundred documents from my old PC to the new folder 'My Documents'.

  As many others have found, Windows Search has been completely useless. She seems to have no problem finding files in the music folder or image, but anything in the document library is invisible to the it - even if I get in a subfolder small for a file name I see just in front of me, Windows Search will announce that "no element not corresponding to your search.

  I took a number of steps so far to fix the problem, which none have worked:

  1. I checked which locations are indexed for search and ensured that the document library is among them (as well as all of my C drive).

  2. I checked that appropriate file extensions (.doc .docx .pdf, etc.) are all selected from the "File Types" list in indexing options (although I noticed that 'Description of filter' for .pdf bed "Registered IFilert is not found" - not this problem with Word documents).

  3. I have deleted and rebuilt the search index.

  4. I ran the troubleshooting Windows 7 Search tool, which reports that it cannot find any problems.

  5. I have read that some problems with Windows 7 search can be solved by changing a registry key (http://www.intowindows.com/how-to-fix-windows-7-search-problems/) but when I navigate to the folder in my registry, only following three keys are here (not the one mentioned in the difficulty):

  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\ {0B2BAAEB-0042-4DCA-AA4D-3EE8648D03E5}
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\ {36011842-DCCC-40FE-AA3D-6177EA401788}
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\ {59BD6DD1-5CEC-4D7E-9AD2-ECC64154418D}

  A couple of things, I said - if I create a new word document and save it, Windows Search seems to immediately get back on it and is able to find. I also noticed that at first when I opened one of the word documents that have been transferred over the old PC and then closed it again, Windows Search picked up on it and could find it. So I went to try to open and close then all of my documents (an arduous task...), but the subject to halfway through Windows Search has ceased to be able to find them.

  All Word documents using Microsoft Word 2007 in .doc or .docx format, although the problem also applies to Excel, PDF and image files, so I don't think that the problem is with the word itself.

  I have tried everything I can think so far, including all the solutions, I could see suggested in previous discussions. I really need the search function working to effectively use my laptop so that any help would be welcome!

  Thank you, Jack

  Santosh thanks, I checked the permissions for the appropriate files and SYSTEM was present, which doesn't seem to be the problem. However, I found a solution that might work for other people are having the same problem.

  I noticed that if I changed the location of the files, Windows search suddenly seems to become aware that they existed and then indexed and followed them correctly - even if they were subsequently moved back to the original location. I just created a temporary folder outside my library of documents and then each subfolder in the folder my documents him and then come back, one by one. It was a bit laborious but the problem solved - I know not why it worked, but all the old files are now indexed and appear correctly when you use Windows Search, and it seems not to have any problems, follow-up of the newly created files.

  Cheers, Jack

• ISE n RAY fail to open

  Good afternoon

  NAC offers parIP admission to fail open on a router.  Y at - it equivalent command to access switches pointing to a RADIUS server?

  Situation:

  Access switches have two RADIUS servers configured, showing a load balancer to Site A (with 6 Ssnp behind) and the second RAY pointing to Site B LB (6 Ssnp behind).  If neither load balancing are available, how could we switch access of relief and apply an ACL giving access only to the Internet for staff?

  Thank you.

  Cath.

  Cath,

  In fact, you can take advantage of the command "action to the authentication event allows id vlan" and empty the users on a virtual local network giving them access while radius servers are inaccessible.

  http://www.Cisco.com/en/us/docs/switches/LAN/catalyst3750x_3560x/software/release/15.0_2_se/configuration/guide/sw8021x.html#wp1194433

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• RoboHelp 9 search fails on the old pages

  HELLP all.

  I have a project with a lot of pages that have been imported mainly PDF files using the version 7 years ago. I converted just project to version 9 and when I perform a search the old pages appear in my search results, but when I click on the link nothing comes. When I switch back to the content and click on the same page it is visible, but I can't seem to open the search results.

  Can any ideas on how I fix?

  Thank you

  Mike

  It works now that I took the sign & (and) off the title of the folder.

• CNVCreate Reader: Service search failed for the server. errno:-6338

  Hey guys.  I'm talking about a LabVIEW application with my CVI application using shared variables, but I'm running into some issues that I can't solve.  The first question has to do with this error to the subjectl line.  I get this only after two calls to CNVCreateReader.  I don't know if there is anything wrong with my formatting of the call, but I suspect it has to do with something that I do not forget to do before you create more than one drive.  There are a total of about seven shared variables are Insider/instantiated by the LabVIEW program.  I'll call programmatically the LabVIEW program before you run code that communicates with the shared variables (LaunchExecutableEx).  My second question has to do with the writing of these same shared variables.  I can read a single very well and the data corresponding with the frontage of the LabVIEW application.  However, when I try to make a call to CNVWrite, I get an error of access denied (cannot write) style.  I suspect that the LabVIEW programmer must do something for the shared variables to allow me to write them, but I wanted to just help you guys ' first entry.  I'm in LabWindows/CVI v.9.0.1 and LabVIEW executable was built in LabVIEW 2009 so I also installed the runtime library 2009 LV.

  Thank you.

  Waiting gives time to other threads to execute their tasks, which suggests that the nets were this hungry. The connection used by CNVReader has more latency and overhead because it is synchronous and requires two-way communication. If you call CNVRead in a loop, then certainly you should also sleep/wait in the loop or you'll miss other threads. I recommend using instead of connections CNVCreateSubscriber or CNVCreateBufferedSubscriber - these are asynchronous connections and are much more effective and you won't wait.

  The variable Manager shows the type that has been set up during the creation of the variable and not the type of the current value. It is possible that the variable has been initially configured as single-byte and not signed - you can always write byte unsigned to a configured as single variable value. I also seen cases where the variable Manager obtains the type badly in some cases. Please also check the type in the Distributed - System Manager it is a more recent program and replaces the Variable Manager. In addition, you should check how the program initially configured LabVIEW variable. The problem of this type should not be bound to the error you get when reading.

• Authentication (Windows Server 2013) AD Cisco ISE problem

  Background:

  Has deployed two Cisco ISE 1.1.3. ISE will be used to authenticate users wireless access admin WLC and switches. Database backend is Microsoft running on Windows Server 2012 AD. Existing Cisco ACS 4.2 still running and authenticate users. There are two Cisco WLCs version 7.2.111.3.

  Wireless users authenticates to AD, through works of GBA 4.2. Access admin WLC and switches to the announcement through ISE works. Authentication with PEAP-MSCHAPv2 access and admin PAP/ASCII wireless.

  Problem:

  Wireless users cannot authenticate to the announcement through ISE. This is the error message '11051 RADIUS packet contains invalid state attribute' & '24444 Active Directory failed because of an error that is not specified in the ISE'.

  

  Conducted a detailed test of the AD of the ISE. The test was a success and the result seems fine except for the below:

  xxdc01.XX.com (10.21.3.1)

  Ping: 0 Mins Ago

  Status: down

  xxdc02.XX.com (10.21.3.2)

  Ping: 0 Mins Ago

  Status: down

  xxdc01.XX.com

  Last success: Thu Jan 1 10:00 1970

  March 11 failure: read 11:18:04 2013

  Success: 0

  Chess: 11006

  xxdc02.XX.com

  Last success: Fri Mar 11 09:43:31 2013

  March 11 failure: read 11:18:04 2013

  Success: 25

  Chess: 11006

  Domain controller: xxdc02.xx.com:389

  Domain controller type: unknown functional level DC: 5

  Domain name: xx.COM

  IsGlobalCatalogReady: TRUE

  DomainFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  ForestFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  Action taken:

  Log Cisco ISE and WLC by using the credentials of the AD. This excludes the connection AD, clock and AAA shared secret as the problem.

  (2) wireless authentication tested using EAP-FAST, but same problem occurs.

  (3) detailed error message shows below. This excludes any authentication and authorization policies. Even before hitting the authentication policy, the AD search fails.

  12304 extract EAP-response containing PEAP stimulus / response

  11808 extracted EAP-response containing EAP - MSCHAP VERSION challenge response to the internal method and accepting of EAP - MSCHAP VERSION such as negotiated

  Evaluate the politics of identity

  15006 set default mapping rule

  15013 selected identity Store - AD1

  24430 Authenticating user in Active Directory

  24444 active Directory operation failed because of an error that is not specified in the ISE

  (4) enabled the registration of debugging AD and had a look at the logging. Nothing significant, and no clue about the problem.

  (5) wireless tested on different mobile phones with the same error and laptos

  (6) delete and add new customer/features of AAA Cisco ISE and WLC

  (7) ISE services restarted

  (8) join domain on Cisco ISE

  (9) notes of verified version of ISE 1.1.3 and WLC 7.2.111.3 for any open caveats. Find anything related to this problem.

  10) there are two ISE and two deployed WLC. Tested a different combination of ISE1 to WLC1, ISE1 to WLC2, etc. This excludes a hardware problem of WLC.

  Other possibilities/action:

  1) test it on another version WLC. Will have to wait for approval of the failure to upgrade the WLC software.

  (2) incompatibility between Cisco ISE and AD running on Microsoft Windows Server 2012

  Did he experienced something similar to have ideas on why what is happening?

  Thank you.

  Update:

  (1) built an another Cisco ISE 1.1.3 sever in another data center that uses the same domain but other domain controller. Thai domain controller running Windows Server 2008. This work and successful authentication.

  (2) my colleague tested in a lab environment Cisco ISE 1.1.2 with Windows Server 2012. He has had the same problem as described.

  This leads me to think that there is a compatibility issue of Cisco ISE with Windows Server 2012.

  
  

  
  

  Yes, it seems that 1.1.3 doesn't support Server 2012 as of yet.

  External identity Source OS/Version

  Microsoft Windows Active Directory 2003 R2 32-bit and 64-bit

  Active Directory Microsoft Windows 2008 32-bit and 64-bit

  Microsoft Windows Active Directory 2008 R2 64-bit only

  Microsoft Windows Active Directory 2003 32-bit only

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/compatibility/ise_sdt.PDF