ISE-impossible to register a node

Similar Questions

• IMPOSSIBLE TO REGISTER FOR EFAX - HP PHOTOSMART 6525

  Hello

  I followed the thread on the button SAVE grayed to Setup efax.  The SIGNIN button is active, but I can't save.  WHY didn't this problem been fixed yet? Can someone help me get through the registration process so that I can access this efax Free service that came bundled with my purchase of this HP Photosmart 6525?

  Thank you!

  Hi all

  IF you have also encountered this problem (cannot save with efax), don't bother contact efax... waste of time. I'm online with their cat and they told me to contact efax tech, I sent their tech staff and they sent back telling me to contact their sales dept (a LOOP).

  HOWEVER, pleased to report that, following this BLOG, ICLOUD IMPRESSION contacted me. They took my information (as described in my original post) and told me that the issue should be put together. Also, they arranged a date and time for the ICLOUD IMPRESSION to remember with the solution and/or additional assistance.

  Today at EXACTLY the appointed time, I got this call from ICLOULD. the representative asked me IF I had again received information (virtual phone efax number and PIN number) by e-mail.  I didn't do it.  Thus, the representative is contact efax to get them to pony up the phone number and PIN.  A representative of the ICLOUD will again call me Monday 5/12 @ 01:00 for HOPEFULLY, walk me through the process.  (He was SURE I have received my virtual phone to efax number and PIN at this time here...) I HOPE SO!).

  The ICLOUD REP also answered my question about whether the fax feature works if I have my printer is configured to interface with my PC via the USB cable, rather than wireless. He assured me that I have internet that the printer should fax very well (AGAIN, i HOPE SO).

  My son also bought one of these machines HP Photosmart 6525.  If it HAS THE SAME PROBLEM AND CANNOT if sign UP WITH EFAX, ICLOUD representative gave me the phone number to contact ICLOULD PRINT to start a case for my son.  IS the NUMBER of CONTACT PRINTING ICLOUD: 1-855-785-2777.  I thought that this could be useful for some of you who are IMPOSSIBLE to register with efax.  FORTUNATELY FOR PRINTING ICLOUD TEAM! AND thanks in advance for your help and your QUICK response.

• Secondary ISE cannot join the head node with error message

  Hello

  I just installed the secondary ISE and made the following points, but when I try to reach the head node, I received the cannot authenticate the primary ISE, please check the server or the certificate and try again.

  -promote the secondary image of autonomous primary

  -export the seconary cert self

  -import the cert in primary school

  -try to add not on the used secondary IP and host with super admin user name

  I noticed one thing that instruction on the ISE 1.1.1 import cert on mentioned primary section:

  1. Choose Administration > system > certificates.
  2. In operations of certificate on the left navigation pane, click certificate authority certificates.

  but there is no certificate authority certificates in the left pane. I chose to store the certificates instead

  

  any suggestions?

  Hello

  Did you put the primary secondary node? You tried to save the node in the wrong direction. To register with the primary node of a node, the application for registration must be initiated from the primary node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Upgrading ISE to the deployment of node 2.0 - two

  Hello!

  As we know that the ISE 1.3 can be upgraded to ISE 2.0 in two different ways. One is to use the upgrade of the Application that is fully automatic and the other way is the new facility of ISE 2.0 (full to the top of the nodes of ISE before installation).

  Tutorials I've seen so far, described primarily on Application upgrade method, but I would like to know about the new facility of ISE 2.0. I choose this option, because it gives us more granular control of the upgrade.

  If anyone have tried this second method for the ISE2.0 upgrade, please share your experience, and give us the procedure step by step. Thank you in advance.

  Bala

  Hello Bala-

  You can do one or the other. Personally, I prefer the direct upgrade path as the back/restore doesn't cary all settings and configurations. In addition, you will need to get new license keys as the ISE system will be new/different, so your old license keys will not work.

  I hope this helps!

  Thank you for evaluating useful messages!

• Impossible to register

  I checked the other posts, and the consensus seems to be that the number of SNIDS on the sticker attached to the bottom of the laptop is the serial number. I have used carefujlly the SNID, the SN and the identification number which is listed under system, and Acer wrote that the three digits are not valid. Can someone tell me which is the serial number, and I'll try a few times? Thank you.

  I have it!

  By George, my computer is now legally registered!

• Impossible to register the software, because already registered... by WHO? Why the customer service can not serve me?

  Hello

  Adobe seems to have a policy to encourage the illegal use of their products by making it very difficult for people who have paid money for their licenses.

  We bought 4 licenses CS6 and 1 license of Lightroom. I checked the number of machines on which these licenses are, and we are not breaking the rules. However, we do not seem to register these products (after you have reinstalled the operating system). Products apparently are no longer supported.

  I thought put in order for CC licenses for the whole team. If customer support is this bad, there is no way!

  You register only produced once, usually when they are first installed.  If you reinstalled without first disabling products which could be the reason why you cannot turn them on (if 'activation' is what you really mean instead of 'register').  You should contact Adobe Support by chat or phone to seek their help.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  800-833-6687 (the only one from 05:00 - 19:00 PST, Monday to Friday day US).

• Impossible to register for account ePrintCenter

  Photosmart 7520e with my MacBook 10.7.5 using. Try to enter to ePrintCenter account, but the password (1), that I thought was correct product error message "forbidden". Request for password reset via email, but (2) when entering it a new password again once product error "forbidden". My password of ordinary HP that I use to publish this work, but obviously not for ePrintCenter, log. What to do and how?

  Mike

  Hello

  A 403 Ajax error, please use a different browser or clear the cache, history, cookies and try again.

  Kind regards.

• Change of IP address for Administration ISE 1.2 nodes?

  Hello world.

  Currently, I don't have the means to simulate this (it would be to create multiple virtual machines to test and I do not have access to this space memory and hard drive to do).

  I have currently deployed an ISE 6 knots, with 2 Central nodes configuration (Administration and monitoring), and 4 NHPS scattered around the country.

  The customer needs to move the hubs of their data center, and it will be to change the IPS for both nodes.

  What are the steps to do this? I've searched and couldn't find anything conclusive.

  My idea is this:

  1. take the secondary node and cancel the registration of the deployment.

  2 change the secondary ip address (cert regenerate if necessary)

  3. change the DNS record for the node admin secondary

  4. secondary displacement in the data center

  5. turn on the node admin secondary

  6 register admin secondary node

  7. to promote the admin school primary node

  8. repeat the steps for the primary (now secondary) node.

  Of course, in the meantime I have to change the IP addresses for servers RADIUS on all WLC and switches.

  Will this work?  Are there additional aspects that I need?

  Thanks in advance.

  Dear Sir

  Your proposed plan seems logical, but you must take care of the following:

  "If you have saved a secondary node of the Administration (the main new) after registering secondary nodes of Cisco political ISE of Service and monitoring, you must restart the secondary Cisco ISE nodes that were saved before the secondary management node was registered."

  City of ... http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_use.

  Thus, after step 7, you need to restart the Ssnp 4 to communicate with the administrator AGAIN.

• Device failover ISE licenses

  I'm working on obtaining of license terms for ISE put in place for the next budget.

  I am confused about licenses for a unit of failover. Do we need to do another set of licenses for the unit of failover, or for the primary device licences will cover the failover?

  Hello

  Before ISE Release 1.2, clients may specify only the ISE licenses to be registered to a single node of the Administration of ISE (i.e., the main node of the Administration). Now, ISE Release 1.2 offers the possibility of recording licenses ISE to two nodes of Directors (i.e., the primary and secondary nodes of the Administration). The registration of licensed ISE on the head node of Administration required rest, but the option to save a secondary node of administration is available.

  Referral link,

  http://www.Cisco.com/c/en/us/products/collateral/security/identity-servi...

• Script vs Java Node Manager - Yes again!

  Can't hurt to continue to ask until I get an answer and can't bear to leave the docs turn in the round longer.
  
  Rene has provided decent training on why there is so much confusion and crosstalk between two "styles" of node manager here-> OSB cluster networks , including links to documents, I went blind read over and over again.
  
  This-> http://download.oracle.com/docs/cd/E17904_01/web.1111/e13709/migration.htm#i1048322 links to it - > http://download.oracle.com/docs/cd/E17904_01/web.1111/e13740/starting_nodemgr.htm#NODEM218 which appears once more as referring to the Manager of node based on java, although I found in many statements of locations to the effect that the node Manager based on a script should be used for automatic WSM.
  
  Yes, of course wlst impossible to contact the 'node - manager' to register the machines... Based on a script node Manager is just that; based script - not a running process, shit!
  
  I'd be happy to hear that I'm be a myopic jerk that is missing something obvious. Please someone show me I'm a jerk - please.

  "I hope that these"answered question"points count for something."
  No, they don't; have you press the correct button, but it is not important.

  In fact I was just teasing you with the link, because you were really going through the roof.

  As you benefited from magical middleware: "Let me also note how we have benefited from your posts on the magical site of middleware."
  telling you here: OSB cluster networks

  Maybe it's an idea to publish your results on the magic of middleware, so that others can benefit from.
  Send us an email at contact (which can be found here http://middlewaremagic.com/weblogic/?page_id=5040)
  and let us hear what you think of him.

• ISE 1.2: Employee with recording of flotation

  Hi experts,
  I am aware of this discussion https://supportforums.cisco.com/discussion/11962026/ise-12-device-regist...

  but looking for a detailed configuration to follow up on the work:
  The employee have access to the network with their departmental systems. No problem
  Employees must now be able to use their mobile devices to access. There is no definition of what devices are permitted.
  II think to let employees to register their devices with address private MAC in MyDevice portal would be the most sufficient solution.
  Any who have a detailed configuration or link how to do it?

  Thank you

  Frank

  Please see the link:

  http://www.Cisco.com/c/en/us/TD/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/byoddg.html

• I need to register my Windows 7 but get the last number and legend is to keep my work number

  Impossible to register using the case number. The dashboard which is automatic at the end doesn't let me continue.  I have 29 days.

  It seems that you do not enter the 25-character product key.

  the key should be formatted like this xxxxx-xxxxx-xxxxx-xxxxx-xxxxx.
  There should be no hyphen at the end if enter you it correctly.

• REGISTER AT FIRST ELEMENTS WITHOUT AN INTERNET CONNECTION

  PURCHASES FIRST ELEMENTS AND INSTALLED ON A COMPUTER THAT CANNOT CONNECT TO THE INTERNET. I AM NOW KNOW THAT AN INITIAL CONNECTION IS REQUIRED FOR REGISTRATION, ALTHOUGH I BOUGHT THE PROGRAM. IS IT REALLY IMPOSSIBLE TO REGISTER WITH CONNECTION OF THE MACHINE TO THE INTERNET?

  You MUST have an Internet connection so that the program can connect to the activation server

• Unable to register/unregister vCenter server extensions.

  Tried the fix for article KB 1025351, still having the issue.  I try to install the converter vmware again because I installed this plugin on another computer in the client vsphere (computer other than the server vcenter, where I originally installed the plugin) and it is running to slow down trying to do a conversion compared to running directly on the vcenter server.  So I went back to the vCenter Server and for some reason, he keeps trying to use other resources to computers, so I uninstalled the converter of vmware since the two machines, and when I try to install vmware on the server vcenter converter I get the error message next, impossible to register/unregister vCenter server extensions.  Called Dell (our vmware support), they are puzzled and want blowing me my vcenter server and vcenter database and start over.  Anyone have ideas, really, I don't want to start from scratch.

  Here is the blog post I wrote a few months ago explained the process with screenshots - http://www.virtuallyghetto.com/2010/07/how-to-unregister-vcenter.html

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP4-DCA

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Cannot run rootdeletenode to remove a node is no longer in force

  Hello. We have a node RAC 4 nodes (11.1.0.7.0) 11g on RHEL 4. We do NOT use ASM. Shortly before, after that system administrators have finished running OS maintenace requiring the DB to be down, one of the four DB server nodes would not come (i. e. would not initialize back). In the short term, the entire DB server has been lost and is not recoverable. During the discussions on the opportunity to bring a new server online to replace, management decided it was ok with just having 3 knots.
  
  So, I was instructed to remove the node 4th of our cluster registry. I did this action before but never when a DB server has been completely 'cleared '. Therefore, I can not:
  -remove the instance on the node to be deleted as the server is gone
  -remove the listener on the node to be deleted for the same reason
  -Impossible to delete the node shape the DB on the node is broken
  
  What I did is:
  -update of the inventory on the 3 survivors nodes via the command "updateNodeList".
  -executed racgons remove_config existing command on the node (ss)
  
  My next step was to run the rootdeletenode.sh (rootdeletenode xyz, 4script outside the CRS/installation HOME directory on the nodes exist as user root. When I try to do, I get the following error:
  
  The database is always configured on node xyz.
  Delete the instance of database using srvctl or DBCA before removing the node
  
  This error does not surprise me, but I don't have access to that server to DB as it is completely unusable. Anyone have any suggestions on how to work around this problem?
  
  Thank you.
  
  Matt

  Hello
  See more notice to MOS

  Steps to remove the Cluster node when the node goes down Due to failure of OS/Hardware and can not start [466975.1 ID] *.

  Salman