ISE is profiling not properly devices

Similar Questions

• Where to see how ISE is profiling to a device?

  Where ISE I see how it is profiling a device?

  I would like to confirm if she done it w / just YES via MAB or other mechanisms such as the sensor in the camera, etc.

  TIA

  If you use a version up to 2.0 ISE so can be the planned audit to the

  Administration > identity management > endpoints

  ISE 2.1

  Visibility of context > endpoints.

  from the moment that you click on the endpoint, get to know what probe used for profiling with attributes.

  Concerning

  Gagan

  PS: rate if this can help!

• I am trying to send my photos from my phone to my computer, but not properly installed device driver appears.

  I am trying to send my photos from my phone to my computer, but not properly installed device driver appears.  My question is what should I do to upload my pictures?

  Hello

  What brand / model of the phone?

  You try to connect the phone to the computer wired or wireless?

  Try the methods provided and see if it helps.

  Method 1:
  Check out the link and follow the steps.

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Method 2:
  Check out the link and follow the steps to install the drivers for the device.

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check this link for more information.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3:
  You can also visit this link and follow the steps.
   
  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly
   

• Problem with the Modem devices: Modem already used or not properly configured

  I use windows 8. Until last night, my laptop was working fine, but now it rejects all the modem devices, I try to plug it. I tried to connect to internet via Auntie photon and reliance netconnect +, but this message "Modem already in use or not properly configured" keeps on appearing two modem devices? Is there a problem with my OS or my laptop? Help, please

  Thanks for the solution.
  Well, my problem was similar but different too. The method to uninstall the modem device is correct. I tried, but still it did not work.
  My problem was that I have 3 different modems installed on my pc, but I used one of them. So I would uninstall only one I used. It turns out that we have to uninstall all modems. Its pretty simple, but its not so obvious. I thought about it later in like 2 days. I hope that people reading this don't have to wait 2 days to fix this problem.

• device control panel works not properly. Cannot read messages about it. How can I fix this?

  Have a HP Officejet 6500 E709n, OS is Windows 7-64 bit. Control Panel on the front of the printer device does not properly. Cannot read messages of information/on it.  What is the problem?

  Certainly looks like a hardware problem (LCD going / has went wrong). At this point, I recommend you contact the support for repair or replacement.

• Why do VPPS apps show as not not transferable device when buying as Distribution managed?

  Hey people,

  I am using Meraki MDM and have been for some time.  It's the free version, but not the legacy version, the license has been upgraded.  I bought about 70 applications through VPP, many of them being free applications.  As with all free apps purchased via VPP, they were purchased as Distribution managed, which is what I want for the assignment of device to iOS 9.2.1 iPad air.  All purchased applications, with the exception of 3, were sent to the required devices without any problem.  There are 3 applications that have still not been sent on other equipment.  Here are media monkey, our history for the iPad and the App of poetry.

  I have no idea why these applications cannot be postponed to the devices, with the exception of the fact that the developer has not activated device allocation for these applications.  Anyone know if this is the case, or if there is no other reason?

  I've been with MDM iPads since iOS configuration 6, so I am very familiar with the process.  In addition, apps that have properly been eliminated, have the same settings applied in Meraki MDM.

  Any thoughts would be appreciated.

  Kind regards.

  Well, I just thought about it.  In the VPP store, when you are going to purchase history, and then click the app in question, when you are on the page for this application, you can scroll down and on the left side, since where it says 'See in iTunes' in a blue box, you will see whether or not it is said 'Programmable device'.  Bingo.  So, even if you can buy the apps like managed distribution, it does not necessarily mean that they can be assigned to the device.

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• USB ports power your equipment, but not recognizing devices

  I started my pc yesterday (21/02/10) - for the first time since the incident of the blue death screen has resolved on 10/02/10 (see 'recent history of the problem' below). I got a screen that says "volume dirty cleaning in 3 steps" or something like that. Subsequently, the windows starts fine but the USB ports stopped working.
  

  All 3 USB ports are now fueling your equipment (confirmed by my laptop fan) , but none of them give me access to any external devices as my flash drives.

  Note: I didn't say "" do not recognize devices "and instead said"give me no access to devices "because when I plug in my flash drive, it is profiled as a material published by ususal Display icon at the bottom right of the taskbar." Of more when I try to eject the material, the flash drive appears as "Kingston Data Traveller". It's simply not let me access the flash player - instead when I click on the flash player icon (drive F :) it asks me to format the drive before using.) But then when I am trying to format it says that "windows cannot format the device."

  [Please note that the USB ports are all works perfectly between these two dates.] In addition, I did not any changes, hardware or software, recently. ]

  Recent history of problems (might be useful):

  I got a blue screen of death problem 2 weeks after I had installed Windows XP updated 09/02/10. I could solve this problem by uninstalling all the following patches: KB978262, KB971468, KB978037, KB975713, KB978251, KB978706, KB977165, KB975560 KB977914. (as suggested in the forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1)

  After that I do not start my PC, until yesterday. It is the problem of the USB to start.

  Hello
  ) not a bad answer, but a lot of work and you can make mistakes
  make a sfc/scannow, as indicated here that it will reinstall missing and corruption of files http://www.updatexp.com/scannow-sfc.html I also noticed in your answer "dirty volume in 3 steps of cleaning" is you have using a kind of cleansing software registry cleaner etc. Registry cleaners that aren't much good for the most part and they will mess up your computer...
  If you do not use a cleaner that get some anti malware software download and run
  I left and use http://www.malwarebytes.org/ please click the checkbox as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• Graphic drive does not properly.

  Graphics driver does not properly.  Screen will Dim and must restart to resume use.  Occurring more frequently now.  Y at - it a fix for this problem?

  Problem does not occur in safe mode.  Failure seems to occur on any key or the video style.

  Any material support is the manufacturer of the hardware regardless of the operating system that you choose to use.  As it is unlikely that you have a Microsoft video/graphics card - one you have and have you downloaded and installed the latest drivers/software they provide for your particular device?

• The windows service install are not accessible. This can happen if windows install is not properly installed. Please contact the support staff

  Whenever I try to install a new version of Java, but also apply for income tax, my computer basically freezes and I have to stop it manually after that I finally get the message "cannot access the windows service install. This can happen if windows install is not properly installed.  Please contact the support staff.  I tried MSI 4.5 but everytime I try to download, I get the prompt "not applicable to your system.  I'm running on Windows Vista basic and I tried to cancellation of the registration of windows install and re save, but nothing seems to work.  Extremely frustrated

  Hi confused79,

  Thank you for your message.

  Here is more information on the use of file system (CFS) Auditor:

  http://support.Microsoft.com/kb/929833

  You can also create another profile to see if the problem is the result of a corruption of your current profile.

  Here's how:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Operating system recognizes is not USB devices

  Also having problems with USB devices not recognized, I tried all of the suggestion in the forum so far... 3 xs... unplugged, battery removed, even left on overnite... did not work.

  r.Unning Vista Home Premium on a laptop MSI M670, updated everything. Peripheral USB work in other PC, turn on in the laptop but the OS does not recognize devices, in Device Mgr shows 'no conflict', "the device is working properly", I uninstalled, disabled, etc. & reinstall Vista does not work, either. I must be a solution!

  The I get no message when the device is plugged... That is to say: the thumb drive.

  Hello

  If you have tried all basic troubleshooting and device is showing to work properly and no noise of conflict-it you may need to reinstall the USB controllers to recognize.

  To remove and reinstall all USB controllers, follow these steps:

  * Click Start, run, type sysdm.cpl in the Open box, and then click OK.

  * Click the Hardware tab.

  * Click on the Device Manager button.

  * Expand Bus USB controllers.

  * Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  Restart the computer and reinstall the USB controllers.

  * Plug in the removable USB storage device and test to make sure that the problem is solved.

  Reference:

  http://support.Microsoft.com/kb/310575

  Hope this helps,

  Steve <> Microsoft Partner

• do not install device driver

  Recently, I checked my devices and printers and he said that my pc needed in case of a problem. He said the xHCI Fresco Logic (USB3) Hub did not work properly.

  After some vicissitudes of shooting and try to fix the problem, it says device driver was not installed correctly.

  In detail, it read "device does not properly because windows could not load driver required for your device (code 31).

  -what it means and how can I solve this problem?

  See if you get any help from this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/two-out-of-four-usb-ports-on-my-laptop-suddenly/dc6a3164-ac97-4a8b-b051-5dce9a9123ed

• Scrolling the page does not properly respond to BlackBerry Curve9360

  Hello friend

  I have developed applications for BlackBerry (JqueryMobile, Phonegap) the application works fine in BlackBerry Torch 9800.

  But once I've installed in BlackBerry Curve9360, scrolling of the page does not properly, that I am not able to view the complete list of items and long text.

  Help, please

  I came up with the solution, the problem occurs because BlackBerry Curve 9360 isn't a touchscreen, there fore scroll doesn't work.

  In my applications, I add 2 pages "index.html."

  on the first page, you have to test if the device is not touch and redirect to the second page.

  Do not use the page for "BB Curve" scroll and any other animation like CSS "" - webkit - transform: translate3d "»

  The other js script go without a problem.

  The page "BB Curve" to redesign the html for use with the cursor,
  For example, the menu is smaller, the police is smaller.
  the size of the screen is fixed.
  Dimension height is better indicate a value min eg 300px
  etc...

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• What happens if the PC I just downloaded Itunes on &amp; connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!