ISE - new administrator.

Similar Questions

• Knots of ISE primary administration failed

  Hi all

  I'll put 3 ISE with deployment of creation, 1 ISE will be configured as Administration node & analysis and others as Service strategy node dedicated.

  My questions are:

  1. If the Administration & monitoring node does not, are authentication, authorization and posture can still run on the client?

  2 promote the node for Service strategy dedicated under the new administration & monitoring nodes? If possible, how the procedure for promotion? It's as simple as promoting the secondary nodes (in case we have primary and secondary nodes) or there are has other efforts, such as needs to restore the database or etc?

  Thank you?

  Kind regards

  Rian

  Hello

  When the primary administration node fails. The ssnp will continue always to operate and implement strategies.

  Since you have a single administration node and if the node must be rebuilt, all other nodes must also be returned to the factory then re registered once the primary node is ready again.

  In this case, you can open a tac case yo have them help make your database to one of the nodes of the psn.

  As always, it's my comments and what I would do if I was in the situation, we can wait a cisco engineer to respond or you can post this question in a tac case to make sure there isn't a future feature that deals with this scenario.

  Sent by Cisco Support technique Android app

• Cannot create a new administrator user account

  Hi, I have a bit of a dilemma. I have a laptop which has Vista from Microsoft and I wanted to create a new administrator account, but I don't have access to the former administrator account. I know that you can not help me with recovery of lost password for the old account, but is there a way to always create a new administrator account without having to restore my computer?

  Hi Chuckter,

  Without an administrator account, you will not be able to create a new one.

  There are 3rd party software that claims to be able to reset the password on the administrator accounts or create a new account on a boot cd.  Search in your favorite search engine 'vista password' should yield interesting results.  Please scan of tools that you can download for infections by the virus.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk...

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ACS 4.0 new administration users connect.

  We just migrated to 3.3 something to 4.0 a few weeks ago. The old system, we had two administrative users: administrator (from right) and hd (with the rights to see registered users and failed attempts). After the conversion and moving to a new server, which works perfectly, user administrator has worked. However, the hd user gets a "connection failed" whenever someone tries to connect, even with a good password. (I have reset the password to things easy, I removed the password, etc.).

  Also, if I change the hd user and click on "Grant All" to access, hd can connect. I tried through the elements a little at a time to see if there is one that can be turned on and let it work, but have not found one and it is a lot of time to go through one of the attributes at the same time, disconnect and reconnect you to solve problems. This happens with a brand new administrator as well - if it has not obtained all rights, he cannot og in.

  The administration audit log is not very useful, registration only:

  24/05/2006 10:36:26 - SECURITY - 192.168.11.95 administrator 'hd' connection failed.

  This worked fine before the upgrade, allowing the assistance of members of the Bureau check which were used on which machines (VPN or dial), and why they did not comply if it was.

  Is this a bug?

  Hi rich,

  I tried this in the laboratory and it works well (only failed attempts and connected users access) with ACS 4.0. I don't know if this is specific to an upgrade.

  BTW, have you tried to remove the 'hd' admin and add another admin using another name of user with rights to failure and registered users?

  How to add an admin without any privileges? Can he successfully connect?

  Obaid.

• Lightroom 6.5 questions, I need to create a new administrator to run the program.

  Lightroom 6.5 questions, I need to create a new administrator to run the program. But I want to use the same, instead of move or copy everything on the new account.

  Please refer to the below link for troubleshooting.

  Solutions to the Lightroom error problems of user permissions

  Kind regards

  Mohit

• I created a new Administrator profile and you want to transfer my old files. But I don't have access to them, how do I re - access?

  My local profile on my Dell's Inspiron Mini netbook has been corrupted, so I had to create a new profile, who is also a Director. This new profile is empty - none of the previous documents, photo previous or any other file. When I go to the discovery of all users, I see that my old profile is always under Documents and Settings. So I want to spend all my old data in there with my new profile. However, when I try to click on the link a message window appears indicating that the file is not accessible, and access is denied.

  Can someone please explain to me why this might be and if there's a way to redo the roster?

  In addition, if it is not possible for me to regain access to these files, what should I click to restart the entire computer. As new and fresh. These files take up half the space in the hard disk, and since then I can not enter in the what is the point of keeping them. So if there is no way for me to access my old files again, how would I go on my computer restarts?

  Facts in brief on my computer:
  -Windows XP system
  -Dell Inspiron mini laptop computer
  -Only had a main profile (type administrator, of course)

  I hope I explained my problem clearly, please excuse me if I don't. Can anyone help?

  Hello

  You can follow the article mentioned below to copy the data from the old profile to the new.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  If you receive the same error then you can follow this article first.

  "Access denied" error message when you try to open a folder

• I created a new administrator user account that has replaced the original one. Now I can not access my old files. What can I do?

  Windows XP Professional

  I found that will help you solve your problem, the original instructions have been written by Shenan Stanley   Posts: n/a

  Re: Main administrator account appearing not If you can connect with the new account that you created (which should be an administrator account as well) then go directly to step 2 below. I suppose that you use the administrator account as your main account (bad idea anyway) and that means that you probably have Windows XP Professional * and *. somehow enabled the guest account or create a new account - or installed some patches that created a new account - as .NET. I guess also that (since you say "appear") you also use the 'Welcome' screen opening of session instead of the classic logon. (1) restart the system. Press CTRL + ALT + DELETE twice on home screen. Type in "Administrator" (without the quotes) as the username and do not put in any password and logon. Work? (2) or follow the instructions below to add the administrator account of the Welcome screen * or * download/use TweakUI to choose that is visible on the screen of welcome and even set automatic logon if you want. How to add a user to the Welcome screen logon page: ------ 1. start regedit.exe (start--> RUN--> REGEDIT--> OK) 2. navigate to: HKEY_LOCAL_MACHINE NT\CurrentVersion\Winlogon\SpecialAccounts\UserLis t. 3. on the Edit menu, select new, DWORD value. 4. type administrator as the name, and then press ENTER. 5 double-click on the new value it the value 1 and click OK. 6. close the registry editor. The administrator account will now appear on the Welcome screen. You can use These same steps to control other accounts listed on the welcome screen. The value of the registry value to 1 to display an account or account 0 for hide an account. For example, to hide the user Bob account, add a value named "Bob" in the registry key identified in step 2, then set the value to 0. You can do the above with the Microsoft TweakUI PowerToy. http://www.Microsoft.com/windowsxp/d...PowerToys.mspx ------ Automatic logons: ------ Method of Microsoft: http://support.Microsoft.com/kb/315231 Method 2 of Microsoft: TweakUI for: http://www.Microsoft.com/windowsxp/d...PowerToys.mspx control userpasswords2 method: (1) go to the Start Menu and run the box. (2) type the following: Control userpasswords2 Now click on OK (3) in the new Windows that appears select the account you want to make the opening main session. Now, uncheck the box "users must enter a user name and password... ». (4) hit apply and a dialog box will appear asking you to confirm the selected user password. Click OK when you have finished... ------ I hope this gets you where you are wanting to be. It's a * good * thing in the field of the user to: (1) have strong passwords. (2) have more than one account to administrator (with strong passwords). I know - you are the "only one who lives there, the only person who uses your. computer'... etc. Large. When your House is burgled and computer

  
  stolen (physically or virtually)<- you="" may="" be="" thinking="">
  Another thing, like ' all my (the only person who lives here, the only person who).
  Use this computer) documents, pictures, e-mails, financial information, updated in cache
  Passwords, contacts, etc... are on this computer. »

  But it's an individual choice. You get to evaluate risk. =)

• I have a problem with the new administrator creating accounts and the original missing on the computer account.

  Original title: profile has been automatically removed, new profiles created automatically and can not open a session

  Help! I closed my laptop (only in the ordinary course of its use) and when I turned it back on, my usual user profile was gone and a couple of new ones have been created. One was created with my professional e-mail address as username (which is strange because I've never used this e-mail in the computer) and the other is empty. I tried to connect both of the profiles using my old combinations of the new user name and password, or user name and the old Word, but it is said that the account and the password is incorrect. I also tried to log on as an administrator, but it says "your account has been disabled. See system administrator. Is it possible to recover the data in the old profile without reinstalling Windows because I am away from home and do not have the disc. ... I use Windows 7.

  Thank you very much in advance for any help!
  You might be able to solve your problem using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.
  On questions of password-, I treat my PC as I have my house: I always have a spare admin account / SpareKey so that I can return new anything that happens. You have a fully tested alternative admin account? If you do not, and if the method above doesn't work, then, you have a major problem that you will not be able to resolve without a CD to repair Windows.

• ISE device administration authentication Radius possible?

  Hello

  does anyone know if the edge RADIUS authentication and authorization administration is possible with the actual release of ISE? I know that GANYMEDE will be available in future releases.

  Concerning

  Joerg

  Yes it is possible according to the "Ask the experts" forum

  --------------------------

  https://supportforums.Cisco.com/thread/2172532

  "If you use RADIUS for the administration of the system, ISE can be used using authorization policy elements that return Cisco av-pairs."  But personally, I think that ACS is currently superior to ISE for this task. »

  --------------------------

  In any case, I'm about to test "device admin" and "network access" at the same time in the same switch with Radius and ISE.

  Please rate if this can help

• New administrator account askes what program to run exe files with can "run as administrator" Control Panel links rundll32.exe not found?

  I deleted the old account and created a new for my son to play games. This account is all messed up. When I try to run a program I get this window that asks what my program that I want to use to open a program!  I can right click and run as administrator password and I'm good. I can right click and start firefox for example by opening firefox with firefox.  This same window icons in the taskbar. And the items in the control panel sounds an error and open a warning that says: 'cannot find c:\windows\system32\rundll32.exe' I don't see why - it's a new account and I can find this file with the other account. Obviously something is wrong but where?

  Hi Drake,
  Follow the steps described in this guide: http://www.selectrealsecurity.com/fix-programs
  If you have any questions about the instructions, just ask. Let me know if this helps you.
  Brian

• New administrator account lacks the privileges on Windows Store

  A friend of mine recently bought a new machine of Windows 8, however she has created a new account to Microsoft rather than use a sound existing account. After adding his account existing Microsoft and he is an administrator on this computer, it has deleted the original of the computer account. When she went to install Windows 8.1 the Windows store, he says that his account needs administrator privileges. His account has administrative privileges already, but which does not recognize the Windows Store app. What can we do to get the app Store of Windows to recognize that his account is an administrator account?

  This seems to be a pretty decent solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Security/Windows-store-doesn

  There is a link below to reset the Windows store and there are instructions in the upper part of uninstall and install a specific Windows Update. We will try and report back.

• I need to define a new administrative password

  I need to reset the administrative password on my HP desk top computer which has windows vista on it, how do I do this?

  http://pcsupport.about.com/od/tipstricks/HT/chgpassvista.htm

  How to change your password to logon to Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-Windows-password

  Change your Windows password

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to update the drivers in a new administrative profile

  I have somehow deleted my admin profile... I tried to create another profile with admin permissions and now impossible to update my drivers... Help, please

  Hello

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Passwords enable ISE device Administration (ACS) integrating with Active Directory

  I'm working on a standalone application ISE and running into a problem where the password to enable for a device is not shoot properly.  I have the original connection related AD and I policy conditions/results/sets all as they should be working.  My test run is a 2960 S.  I tried to set up ' group aaa authentication enable default Activate ', but the only way I could do a login enabled with which was if the user has configured locally in ISE identity management > identity > users.  Is there something that I missed that tie will enable passwords for a group active directory as I work for the initial logon?

  I see just a mistake with your failure to enable aaa authentication enable. You must specify the Group of Ganymede.

  Right now, I don't have access to my lab with ISE.

  Here's my config for switches used with ACS.

  AAA authentication login GANYMEDE-SRV Group Ganymede + local
  local authentication AAA Console connection
  Group AAA dot1x default authentication RADIUS
  AAA authorization exec GANYMEDE-SRV Group Ganymede + local
  AAA authorization commands 15 GANYMEDE-SRV Group Ganymede + local
  Group AAA authorization network default RADIUS
  AAA accounting exec GANYMEDE-SRV arrhythmic group Ganymede +.
  orders accounting AAA 15 GANYMEDE-SRV arrhythmic group Ganymede +.

  If you give me all out maybe we can understand why your GANYMEDE ISE works do not with the AD. I see no reason except a misconfiguration or another issue.

  Just to go to the mode, you need more aaa authentication command activate by default enable. This activation mode is pushed to the user if he gets the privilege 15. Your problem should be on the profile or politics. With the approval journal, we can see whether or not ISE pushes politics and why?

• Adding new administrator of an existing OnPlus site

  Hello

  I would like to add me to a site's existing OnPlus (device) as another administrator of the site.

  My colleague who already has access to the site, do the steps explained in

  Adding and managing the authorized Agents of the OnPlus Document portal user guide.

  steps to follow:

  Agent-> Agent invite-> send an invitation by e-mail.

  I received the email with the URL.

  I have consulted the URL, entered my information but I get the error message at the presentation: "This user ID is already registered."

  I have an OnPlus account initially, I created, but it is not related to any client.

  If this account is the origin of the problem, how can I delete the account?

  Can you please help?

  Thank you

  Kavi

  Hi Kavi,

  Simply send an e-mail to [email protected] / * / with the Cisco.com ID that you have deleted, associated to this CCO ID. email address one of the team of OnPlus will respond directly by email, and upon receipt of your confirmation email, we will remove the account from the portal OnPlus and send you a confirmation email that what happened. You can then follow the link in the email to your supplied colleague.

  Kind regards

  -mike