ISE on NGC

Similar Questions

• IP integration node

  Hello

  I loocked through many positions and searched in many materials, but could fins no answer to my problem.

  I have my using the LabVIEW 2011 IP integration node.

  For sbRIO9642, I tried to integrate an IP synthesized for x3s2000 FPGA from Xilinx ISE as ngc netlist file.

  I always got error:

  Annotation of the constraints to the design of the FCU, file 'toplevel_gen.ucf '...
  Set associations of constraint...
  Associations of constraint checking...
  ERROR: ConstraintSystem:59 - constraint
  PADS (mIoHWord_n) PADS(aIoInt*) 0 NS; > [toplevel_gen.ucf (375)]: BUFFERS
  'mIoHWord_n' not found.  Please make sure that:
  1. the design element specified actually exists in the original design.
  2. the specified object is spelled correctly in the file source of constraint.

  It seams there are evil somethning in the intermediate file of constraint.

  Cam anyone help me understandit is correct integrate the ngc netlist in LabVIEW FPGA.

  Thank you

  Manuk.

  Hi Manuk,

  It seems to be more information about this error on the Xilinx website in resources of NOR. Check out this link for more details. To make sure that your VHDL is in the correct format for an IP node, follow the steps described in this document.

  Tim W.

  Engineering applications

  National Instruments

  http://www.NI.com/support

• I would love to see my idea of ISEEDS Apple. Wireless. Bluetooth headsets in the form of seeds. No more son. And the landslide simply out of the back of the phone.  They are always charged. A simple click of your thumb to the rear and an iseed flicks or

  I would love to see my idea of ISEEDS Apple. Wireless. Bluetooth headsets in the form of seeds. No more son. And they simply slide to the back of the phone.  They are always charged. A simple click of your thumb at the back and an iseed movies out. And an Apple healthy seeds

  Garry Graham

  Please you not to Apple here. This is a user forum. You can share your comments with a Apple. They will not respond, but at least they'll know your suggestion.

  http://www.Apple.com/feedback/

• Choose ISE or Vivado Xilinx tools for a specific compilation of FPGA

  Hello

  Is there a way to specify what version of Xilinx Compilation tools to use when compiling an FPGA VI? I want to try the version Vivado tools rather than the version of ISE to see if there is an improvement. I have listed some information on my setup below.

  It's my current setup:
  NI5772 / PXIe7966 digitizer and FPGA
  SMU-1082 chassis
  SMU-PCIe8388 / SMU-PCIe8389 controller
  LabVIEW 2014

  In the past, I used the LabVIEW 2014 FPGA Xilinx tools 14.7 Module to compile my code. But I also want to try the version of Vivado, "LabVIEW FPGA Module Xilinx tools Vivado 2013.4 2014', to see if it gives better results."

  Page-based "compatibility between tools Compilation of Xilinx and FPGA hardware OR" here:
  http://www.NI.com/product-documentation/53056/en/
  Looks like the PXIe7966 FPGA must be compatible with the tools of Vivado 2013.4.

  I tried to uninstall the version 14.7 ISE tools, and install the 2013.4 of tools Vivado (so Vivado 2013.4 tools are the only xilinx tools installed on the computer). But LabVIEW complains that the ISE 14.7 tools are not installed and does not compile the FPGA VI.

  Thank you!
  Michael

  This FPGA is a Virtex-5 FPGA, so you're stuck with ISE.  You need a card FPGA that either uses the architecting chip (I think it was only in cRIOs) or 7 Kintex to use the compiler to Vivado.

• [FPGA] xilinx ise?

  Hello

  I am trying to configure a component LabVIEW and xilinx coregen won't let me because «is not installed with labview fpga xilinx ise» I can't find a proper download of NOR. Is this a question expected? There is of course the xilinx website, but do I need a specific version and how can I say? The target FPGA's Virtex-6 LX195T if that's a factor. LabVIEW 2013.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/210629

  Hey, ToeCutter,.

  You have the 2013 LabVIEW FPGA Module Xilinx tools installed locally? Who has Xilinx coregen, which is what you will need to configure their intellectual property. If you are some intellectual from the LabVIEW FPGA palette, it should "work".

• LabVIEW fpga xilinx ise vs

  Hi all

  I'm new to fpga and my question is fairly simple which is best?

  LabVIEW fpga and xilinx ise platform?

  or does rely on demand?

  I'm not familiar with these protocols, so I can't answer the question precisely.

  NOR has several FPGA products with high-capacity chips.  I guess that they could manage the protocols, but I can't make any promises.

  Unless you're already an expert ise, I don't think you're going to end up with a more effective than LabVIEW code.  I guess that's a possible higher capacity chips are available for ise as LabVIEW, but I don't know.

  One thing I like LabVIEW is that you can write the code and compile it for the target without having to purchase the equipment first.  You could program the algorithm, and then understand what size FPGA, you put on.

  Bruce

• Error 0 x 80070643 installation on Windows Server 2008 R2 when installing PowerShell ISE?

  I am running a new installation of WinSvr 2k8r2 order on my server at home. and when I try to install Powershell ISE, I get error 0 x 80070643 installation.  I read the entries posted here but all are specific to MSSE and related to Win7, Vista, or Windows XP. What should I do to fix this error.
  Thank you

  Hi Dan,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows PowerShell Forum

• Windows PowerShell ISE is required on Windows Vista Home Edition?

  Windows PowerShell ISE is required on Windows Vista Home Edition?

  Original title: Windows PowerShell ISE

  Hi MEL41,

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. If I understand correctly, you need to learn more about Windows Powershell ISE, is it necessary for Windows Vista Home edition.

  1. do you have problems regarding Windows Powershell ISE?

  2. do you receive any error messages?

  Windows PowerShell 1.0 is a new shell for command line based on tasks and a scripting language that is designed specifically for system administration. Based on Microsoft .NET Framework, Windows PowerShell IT helps professionals and expert users control and automate the administration of Windows operating system and the applications that run on Windows.
   
   
  Using Windows PowerShell, administrators can manage their systems by typing individual commands or running scripts that automate management tasks. Microsoft Exchange Server 2007, Microsoft System Center Operations Manager 2007, System Center Data Protection Manager V2, and System Center Virtual Machine Manager use Windows PowerShell to improve efficiency and productivity.

  Windows Powershell is intended for administrative purposes, if you use it, you can uninstall the update. I suggest you to read this article for more information.

  Reference:

   

  
  Windows PowerShell 1.0 for Windows Vista installation package
  http://support.Microsoft.com/kb/928439

   

   

  Hope this information helps. Please reply back with the State so that we can help you.

• PowerShell does not open, Powershell ISE throws the exception when starting

  I am running Windows 7 SP1.

  When I try to start Powershell (x 64) or Powershell window will appear for less than a second, and then disappear.

  When I try to start Powershell ISE (x 64) I get an error on the application of "the exception unknown software exception (0xe0434352) occurred in the application at location 0x7568c44d."

  When I try to start Powershell ISE I get an error on the application of "the exception unknown software exception (0xe0434352) occurred in the application at location 0xfd96adad."

  I tried to repair .net 4.5 and I tried to reinstall Windows6. 1 KB2506143-x 64.msu.

  When you try to install KB2506143-x 64.msu I get "the update is not applicable to your computer."

  When trying to make sure that the old powershell is uninstalled I can't find KB2506143 in the list of installed updates.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Reset password ISE CLI

  Hi Security Experts,

  Is it possible to reset/recover password ISE CLI of ISE WebGUI? I am able to enter web gui of ISE, but not able to connect to the CLI. So want to reset/recover password ISE CLI from the GUI.

  PS: I rate of useful messages.

  Thank you

  Boudou

  Hello

  You can only recover the cli password after you restart the node of ise of the installation DVD. There is no other method.

  Reference - http://www.cisco.com/en/US/docs/security/ise/1.1.1/installation_guide/is...

  Sent by Cisco Support technique iPad App

• ISE 2.0 Server backup problem

  Hi guys

  I'm trying to implement backup-TFTP to an ISE 2.0, but the TFTP entry does not appear in the repository list, once I configured it.

  Does anyone else have this problem?

  I also had problems with FTP backups. The repository is configured and healthy air. The backup starts, runs for 5 minutes while getting progressively to 80% and fails. Newspapers reported simply that there so I don't know why he did it.

  Any suggestions?

  Cisco Identity Services engine

  ---------------------------------------------

  Version: 2.0.1.130

  Build Date: Kills Mar 3 02:38:48 2016

  Installation date: Wednesday 25 May 22:44:10 2016

  Thank you

  m

  You want to confirm that the user that is configured for the repository has rights to write to the FTP server.

  Javier Henderson

  Cisco Systems

• ISE Server - query of multiple networks

  Hi guys

  We intend to deploy a Cisco ISE server to handle NAC for 300 users (Windows, WYSE, phones Avaya and HP printers). DHCP is running on the domain controller and the ISE interface Layer 2 visibility of all of the network segment management.

  We received an additional amount for a dedicated/completely separate switch VLAN which provides unlimited Internet access. It would be connected to a third-party router connected to the Internet, allowing connections directly on the internet. Indeed, it is a completely separate network of a single VLAN and Internet access.

  Is it not possible to manage the security of the ports for that VLAN from the ISE Server? If so, the server ISE would need an additional NIC configured in the VIRTUAL Internet LAN subnet?

  Basically, I wonder if a single ISE server can be used to manage 2 totally independent networks. The Internet would not use AD authentication and access would have to grant manually on a case by case basis.

  Thank you very much

  M

  Just to clarify, ISE has NO need to be Layer2-adjacent to clients to work. Only if you use specific profiles of the probes is this useful ever. Has no use when you perform the validation of the mac addresses or 802. 1 x.

  As for your question, yes ISE can manage the addresses of mac validation by the ex. say requiring access to your 'Internet' VLAN and your internal VLANS at the same time. However, it is not made with the 'port security' switch feature, but rather by entering the mac addresses that need access to your server to ISE and using the "group" you put them in ISE, in ads a condition when the permission access to ISE.

• AnyConnect FireSight through ISE user

  Hello!

  We installed the ISE 2.1 for AAA process for users VPN to ASA5545x. AnyConnect users authenticate successfully and you can see the username within newspaper at ISE. Also we have modules of firepower in the ASA and the virtual appliance FireSight 6.1. How we can use ISE as a source of identity for FireSight?

  Inspect traffic to the power of fire based on groups of users, or a user.

  Thanks for the help.

  Hello Serge, you can certainly do that by integrating both via PxGrid.

  Thank you for evaluating useful messages!

• ISE license migration

  I have the license wireless / wireless upgrate on ise 1.4 and licenses will expire in two days.

  What should I do?

  1. If licenses exceeded what ise fuction can do?

  2. I intend to migrate to ise 2.1 (lisences wireless and wireless upgrate end of sale) what can we do?

  If you have 1.2 upgrade to any higher version then licenses gets upgrade automatically.

  Otherwise any costs re/install-image, need to install mobility and upgrade license.

  You must contact the licensing team, get your license has changed with mobility and the upgrade of mobility as upgrade Wireless / Wireless does not work on versions 1.3 and above.

  Mobility and mobility upgrade licenses cannot coexist on a node of Cisco Administration at Base of, Plus, or licenses of the Apex.

  Concerning

  Gagan

  PS: note as correct if it helps!

• SW-3415-ISE-K9 more or Apex subcription

  Hi guys

  A customer bought the SW-3415-ISE-K9 with basic license, now they say they was a subscription that covers everything.

  But I see most subscription covers a few more things.

  And the Apex subscription covers a few more things.

  Can I use subscriptions? or is this one that covers everything that is not on the data sheet

  More and Apex licenses are additive on top of basic licenses. There is no single SKU, you can order that includes both. (Unless you count some of the rarest upgrade SKUS to customers with licenses Apex as sub-line items and NAC which include basic, more).

  If you are a partner, please see the Guide of ISE order for many more details.