ISE PUA personalized for wireless comments

Similar Questions

• Change of ISE of the VLAN for wireless settings

  Hello

  I configured on ISE posture strategy for posture compliant and noncompliant to endpoints, such that endpoints compliant posture will fall in VLAN clean and not conform will fall in others.

  Now, my question is, even if an end point is consistent, it is not in VLAN own posture. To get the ip address of VLAN, it requires enough ipconfig and ipconfig / renew to do manually.

  How to solve the problem...

  Kind regards

  Aditya

  If you assign a VLAN, the final step for the PC client to renew its IP address. This step is performed by the portal of reviews for Windows clients. If you have not defined a VLAN for the 2nd AUTH rule earlier, you can skip this step.

  If you have assigned a VLAN, complete the following steps to enable the renewal of the IP:

  1. Click Administration, and then click comments.
  2. Click settings.
  3. Expand comments, and then expand Configuration multi-portail.
  4. Click DefaultGuestPortal or the name of a custom portal that you created.
  5. Click the DHCP Release VLAN check box.

• Trial license of ISE for wireless devices

  Hello

  We currently have a project underway for a deployment BYOD, but focuses mainly on smartphones and tablets.

  For this I want to evaluate the ISE. I know that there is a 90 days trial license, but according to the reference of the function guide is the basic and advanced.

  As far as I know there is also a specifically for authentication of wireless devices.

  My question is now, if there is also an evaluation license available for the authentication of wireless devices.

  Thank you!

  Kind regards

  Patrick

  Patrick,

  It still works with the eval base licenses and advanced that come with the software.

  To ensure that radius account management is configured correctly for endpoint devices reports you correctly.

  Wireless license is only for wireless users, while the base allows wired and wireless.

  Thank you

  Tarik Admani

• Hi all, I have been using adobe CS 5.1 software. What do you recommend to upgrade my CS? or get the subscription on an annual basis, thank you in advance for your comments here

  Hi all, I have been using adobe CS 5.1 software. What do you recommend to upgrade my CS? or get the subscription on an annual basis, thank you in advance for your comments here

  The decision is yours as a last resort.  You must take into account your preferences and reasons for use.

  If you use the software mainly for personal projects, and then have a suite may be all you need, and the one you now could suffice for that as well.  If you are a professional who needs to be on the cutting edge, you probably want to have the subscription works for you.

  Upgrading to a new CS means get CS6, which is likely to be the last of the CS of releases.  If you don't have that you pay for it once and what do you get when you pay, it's what you'll get until the it becomes obsolete somewhere off the coast in the future, with the exception of the corrective updates that may be provided.  It should contain up to to be useful for a number of years.

  If you purchase a plan of cloud, you pay for it many times over - essentially a monthly fee - time, but you get the updates and new features as they become available.  There is always a chance that the latest updates could out-spec finally the machine you own, requiring an update of material to continue with new versions.

• Satellite Pro L450-13 q (PSLY1E) - XP driver for wireless network card

  The system has Windows 7 pre-installed and has Windows 7 recovery DVD.
  I searched online and found that some packages also include Windows XP Professional as a downgrade.

  This was not included in my package, I received.

  I managed to get most of the drivers for XP, including graphics and sound card.
  But at the present time, I have not been able to locate the driver for the wireless card.

  Can anyone help?

  Thank you very much... Mark

  Hi mate,

  I think that you should look for the Toshiba WLAN drivers WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Normally you will find all the drivers for wireless network cards in all laptops Toshiba so it s worth a try! ;)
  Moreover, what WLAN card you have exactly?

• Suggestions for wireless router for a big house?

  Hello.

  I have a client's family who will be in a large walk-in (but on a hill giant hill as if she had two floors) House. About 88 feet seems to be the longest distance a small room with the new cable modem. This is based on the aerial shooting of Google Maps: http://zimage.com/~ant/temp/88ftLongestDistanceFromACableModemRoom.jpg (on the right/east side is a huge Hill with trees).

  An old Linksys WRT54GL router will be able to manage this far distance at high speeds and stability? If this isn't the case, then what wireless routers can do? It would be nice to have options of third-party firmware like the Linksys WRT54GL routers. Rapid speed Gigabit / fast local file also, transfers between the computers in the House! 100 Mbps is slow these days! Stability and support are too important. The routers didn't need to be later also.

  Thank you in advance.

  The maximum distance of this router is 100feet provided that there is no interference between the router and the computer. If you want to transfer local gigabit speed, so it is not possible with this router because it has port etherne is only 10/100. You may need to consider getting a Wireless N gigabit router (make sure that the wired adapter of the computer also is gigabit). For wireless connectivity make sure that the computer's wireless network adapter is dual-band N adapter.

• dv6810us don't Scan for wireless networks

  I have a Pavilion dv6810us notebook running Vista Home Premium. It has the Atheros AR5007 wireless card. There are ten days, he stopped searching for wireless networks. I can only connect to a wireless so I manually enter the SSID and password in manage wireless networks. The connection to a network screen displays the message, "Windows cannot find any additional network." The box at the top right of the screen does not work. The last day, I was able to find wireless networks was at a Starbucks in New York on 29 October. Help, please. Thank you.

  Please do not hold account that last response. I did a Google search and found at www.wefi.com. It works! Thanks a lot for your help. I like the fact that the software gives you a list with icons that tell you if a hot spot is protected or not, so you can see at a glance. Nice work and 1 million thanks!

• Increase the length of character allowed for wireless access PIN code

  I need to know how to increase the maximum number of digits allowed when you enter the PIN method of Wi - Fi.  I have a new home wireless router that requires a PIN 14 digits to access the wireless system.  My Vista operating system allows only 8 characters maximum.  I can not access my wireless network.  Is there a solution of regedit?

  Hello

  Assuming that you mean by "PIN Wi - Fi", the wireless security password.

  You must configure the security of the router to match the capacity of the computer.

  Put the router to WPA or WPA - AES, and the computer will adapt.

  In general.

  Of the weaker for wireless security, more strong capacity is.

  No security

  Switch Off SSID (even has No Security. SSID can be sniffed easily even if it is turned off)

  MAC Filtering___ (Band Aid if nothing else is available, MAC number can be easily Spoofed).

  WEP64___ (Easy, "Break" by knowledgeable people).

  WEP128___ (a little more difficult to activate, but "Piraté" too).

  -------------------

  The three above are not considered safe.

  Safe starts here at WPA.

  -------------------

  WPA-PSK__(Very Hard to Break).

  WPA-AES__(Not functionally Breakable)

  WPA2___ (not functionally breakable).

  , Note 1: WPA - AES the current interpretation level entry of WPA2.

  Note 2 : If you use WinXP SP3 bellows and not updated, you will need to download the fix from Microsoft WPA2. http://support.Microsoft.com/kb/893357

  Documentation of your devices (router wireless and computer wireless card) must indicate the type of security that is available with your wireless hardware.

  All devices MUST be set to the same level of security using the same password.

  Therefore, security must be set according to what is the best possible one of the wireless devices.

  I.e. even if most of your system may be able to be configured to the maximum with WPA2, but a device is able to be configured for maximum of the WEP Protocol, to the whole system must be configured to WEP.

  If you need more security and a device (such as a wireless card that can only do WEP) is now better security for the entire network, replace with a better device.

  Definition of wireless security - http://www.ezlan.net/Wireless_Security.html

  The fundamental differences between WEP, WPA and WPA2 - http://www.ezlan.net/wpa_wep.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Photosmart 6510 - Windows 7 - I need to the Port ID to set up my modem for wireless connection

  Printer: PhotoSmart 6510

  Operating systems: Windows 7

  Modem: Huwawei E586

  The printer configured easily to the modem for wireless connection.

  The problem I have is that my laptop cannot see the IP address of the printer when I try to configure a wireless connection.

  I am trying to add the IP address of the printer to the virtual server from the modem list.

  What is the PORT ID required by the printer?

  This information is not in the installation notes.

  I found it. It is Port 9100

• Missing notification icon for wireless keyboard and mouse in the systray area.

  Missing notification icon for wireless keyboard and mouse in the systray area. Was working before the hard disk crash. Had to reload Windows Vista 64 bit OS. Have computer model gateway GT5678.

  Chances are good the software to include these icons in notification tray cam pre-installed on the bridge.  If you still all original gateway software, try to see if something in the menu start / all programs of the gateway seems as it can contain controls for these settings and run the program to check and see if it does.  If none of the gateway software help (assuming that all this is still installed) and re-installing the drivers did not work and there is no controls at the keyboard or the mouse, so I know what else to think.  These icons are not available with Vista - they were installed by a third-party device or software driver.

  I'm sorry that gateway could not help you.  They are those that you need to do to solve this problem, because it is something that they installed with the original computer which is not re-installled after you change hard drives.  They should know what software for it and power point yoo to a download site, or you send a disk with this software.  We can't really do anything else to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP photosmart 309 a continues to search for wireless routers

  HP Photosmart 309 has

  Windows 7

  No error message

  I follow the instructions to install printer

  1) go to your printer

  (2) select the arrow to see the next menu. (it should be on the right side of the LCD screen, it looks like a triangle on the side)

  (3) select Setup--> network--> network wireless assistant

  (4) the printer will start to search for wireless networks and continues and continues even with router in the same room?

  Hi Nigel,

  You will need to call our technical support at 800-474-6836 for this radio show. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Get the Installation failed (-10) for Wireless LAN Driver on Samsung laptop running Windows 7 computer

  I tried to install the update of the driver wireless LAN appears so in SW updates on my Samsung laptop model number NP305E5A that is running Windows 7 (64-bit); and I keep getting error message-10 Installation failure.  I called Samsung and they distance access my computer and tried to install it via the SW update, as well as through websites; and it's the same thing; and they said I need to contact Microsoft as there seems to be some sort of bug on the side of the things Microsoft... Or otherwise I have to do a factory reset my laptop (which I will lose everything I have on my computer - not my first choice of solving this problem)

  The biggest problem with this is that it has disabled the wireless all together, and EVERY time I turn on my computer I have to go into my settings and activate my wireless, and no matter what I do the settings will not stay and I lose connectivity wireless at times.

  Please tell us what to do.

  Download the driver manually for the wireless adapter. (see instructions below)

  Restart in Mode safe mode and uninstall the driver via Device Manager.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Click Start, type: Device Manager

  Press enter on your keyboard

  Expand the network adapters

  Right-click in the map listed wireless, this must be a wireless network Broadcom based card

  Click on uninstall.

  Restart your computer in normal mode.

  Download driver driver for Wireless adapt.

  Go to http://www.samsung.com/us/support/owners/product/NP305E5A-A01US

  Scroll down to the driver tab, and then select your operating system and architecture:

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  

  After you have selected your architecture, scroll to the bottom of the page and you will see your driver listed:

  

  Scroll to the right click on the button to download the Zip

  

  Once downloaded, extract the zip file and then double-click the installer to begin the installation.

  Compress and decompress files ( filezip ) - Windows help

  Tips for fixing common driver problems - Windows help

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• new redirect URL of ISE 1.3 for WLC (Webauth external URL)

  Hello

  Could someone tell me the URL of ISE 1.3 for WLC?

  ISE1.2 was:

  https://ISE-1.Cisco.local:8443/guestportal/login.action

  Yes, the structure has been changed since version 1.2, and I did bother understand since there is now a button 'Portal test URL. Have you tried? Or do you still need to be able to manually browse for it?

  If you still need search manually it then you can use the test button to get the URL and then save it :)

  Thank you for evaluating useful messages!

• DHCP is not enabled for wireless network

  Hi all

  I have problems with internet connection and a large part of the time, that Network Diagnostics says Windows "DHCP is not enabled for wireless network", then it solves a problem, but I lose the connection several times a day, and each time that do the same fix again.

  I checked the Device Manager settings and DHCP is started and set to automatic, I also ran CMD > ipconfig/all and can paste the results if need be.

  I use a VPN and never had any prior issued connection with it and it seems to be just as hard to connect if the VPN is enabled or disabled.

  Also recently I got the "security defender" virus which has been deleted successfully, the next day of the day it has been deleted, all network cards have messed up, I uninstalled and reinstalled them but that didn't work so I restored my system and that seems to fix the problem, my computer does not seem to run as fast after the virus as before so I wonder if it has an impact on my current problem.

  I use a Toshiba Satellite Pro 660D and Windows 7.

  Hello

   

  Thanks for choosing Microsoft Community. However the question you posted should be better on the TechNet forums. Please post the question here:

   

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

   

  Don't answer if you need assistance, we will be happy to help you.

• HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Contact HP support.
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251