ISO 12800 - where is it? [Solved]

Similar Questions

• Solve complex equations stored on the HP50g

  Hello

  I stored the 2 equations Δ & K, but when I try to solve in the Num. solv. I get the message bad guess (es). I searched on google and it seems that it is because I work with complex numbers and the num solv. can't handle them.  However, I have not found the way to solve them. I use two equations, so it would be great if you could help me find a solution where I can solve them enter the values of the variables, just like with the num solv.
  

  

  FYI, make sure you go back and read your old post... the method to enter the equations with existing values using EQW is demonstrated in the last entry and unfortunately was added after you received the answer to your question...

  Here's the simplest method

  all four variables stored... S11, S12, S21, S22,

  Press the following keys...

  EVAL

  selection for DELTA key

  Come in

  EVAL

  selection for K key

  Come in

  There is another method by using the MENU (30)

  However, I have to work on the process I'm not as familiar with the algebraic entry mode...

  unless another Member of the forum knows how to use MENU (30) in algebraic mode and can post the post-processing.

  will try to send the process later tonight...

  MENU 30 is generally described beginning on page 6-26 of the 50G (not the user manual) User Guide

  the section is the title "Submenu SOLVR"

  the manual describes the process as

  MENU (74)

  Come in

  Press F1 (root)

  Press F1 (solvr)

  MENU (30)

  Come in

  is direct access

• Availability of OEM ISO download

  Hello

  I'm looking for the ISO file to rebuild my laptop on a new HARD drive. I have the key but not the ISO. Where can I download the ISO x 18-82072?

  Is this something you have available for the user?

  Thank you

  You can use the key to clean install with a Windows 10 TH2 .iso see here:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

• Windows 7 ISO (from Digital River) will not completely download

  I made the mistake of buying Windows 7 from Digital River.  I got nothing else problems, and their "customer service" has absolutely no value.  Here's my last problem:

  They finally made an ISO of Windows 7 available for download file.  ISO has been necessary because the Windows 7 Installer, they provided for the 64-bit version wouldn't work on a 32-bit version of Windows Vista.  The ISO has been provided to solve this problem.

  In any case, I tried to download the ISO literally dozens of times.  Everytime I try, it stops at an arbitrary location in the download, as Mo 600 or 800 MB or, more recently, 16 MB and told me that it is complete.  This is supposed to be a 3 GB file.  I even followed the link on my MacBook and tried to download is here to make sure that my PC was not the problem.  It didn't download completely on the MacBook either.

  Does anyone else have this problem?  I'm sick to death of having problems with Windows 7.  I would be very happy any help you could give me.

  I am currently running Windows Vista 32-bit.

  Thank you.

  Keep up with her.  I had downloaded about five or six times before that I'm a good download.  For those who have problems, I found that Nero would burn the .iso file, regardless of whether it is complete or not, but the burning DVD/USB tool told me that the .iso file is bad (when he was bad, of course).  But it took me several attempts to do this know.

  Surprise yesterday: I received a package from Microsoft with a DVD inside... Ah, Wndows 7... 32-bit, no less.  I've never seen such a mess screwed up in my life.

• Where are the vmware tools?

  I just did a clean install of ESXi.  Then, I created a machine virtual windows.

  Then, I want to install VMWare tools in the virtual machine.  I can't find the ISO nowhere - where is?

  Thank you. WILL BE

  There is no ISO file as it is integrated in the vSphere Client. First of all, make sure that you have a CD device as part of the equipment to the customer and that the customer is running. Then, right click on the customer name in the left pane of the inventory and select "guest". At the bottom of the list will be "Install/Upgrade Tools. It's installation.

  HTH,

  Garth

• Windows XP hangs at the splash screen, safe mode does not work either

  I've updated my laptop with a windows update and when I went to restart, it crashes just in the start screen.  I tried in safe mode hanging at MUP. SYS and I tried the last known configuration.  So far these options do not work.  I tried Memtest, HDAT2, Ultimate Boot CD tests, chkdsk/p and chkdsk/r, Windows XP, CD recovery and rebuild, tried to start up with each opening of USB port and even tried formatting and installing Windows XP Pro SP2 and Windows XP Home Edition SP1.  So far I have always in step 1, where nothing has solved nothing.

  I noticed that there is a thread here where a person has had the same problem and he said that it has updated its BIOS.  For hours, now I did research on how update my BIOS by creating a bootable disc...  I'm thumbs on a mile it looks. Here is a link to the thread with the person who had the same problem. http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/2b3f344c-F923-4D84-868d-c0be603e601b

  I've been on the forums of Toms Hardware for more than a week with a little support, but so far, nothing has worked. http://www.TomsHardware.com/Forum/253683-45-wont-load-hangs-splash-screen#t916360

  I could use any help we can on it.  It would be deeply appreciated!  My email is * address email is removed from the privacy *.

  Well I tried to Win 7 on a bootable disc.  I followed a bunch of instructions I found on youtube.com, but for some reason that I could not burn to disc.  Kept getting an error even if I followed every perfect step.

  In any case, I watched my CMOS on compensation, but the battery is soldered on.  I just messed with it a little bit to see if it was lost or anything thing but I didn't rip out and one other solder on because I have never done this before.  So I put everything back together, turned on my laptop and it finally starts up the Windows installation screen.  FINALLY!  Thanks for everyone's help and patience.  I guess the battery has lost... but not quite sure.  I left the laptop off for about 4-5 days before I tried to play with the CMOS this morning.

  Daavee, thanks for your help on this.  I learned all troubleshooting and making the ISO.  Have a good Christmas!

• DELL PowerEdge T300 boot CD

  Hi, my T300 PE with Windows Server 2003 keep restart when loading Windows, I need to repair operating system , but I lost the CD to boot for my T300.im of PE begging you to give me the link (if able iso link) where I can download it.

  Thank you very much!

  Let me be more clear... you can NOT repair the BONES with SBUU.  The only thing that will make SBUU is to help you to re - install Windows and it will be, WIPE OUT, all the information on your current disks!

  You said Server 2003 won't start - it keeps just reboot to the Windows form.  If you want to solve this problem, you need to boot CD of the 2003 version of the Recovery Console.  Since 2003, cannot communicate with readers without a RAID driver, you will need to load the RAID driver (below) of a disk at F6 during installation of Windows (the first thing you see when you start on the Windows CD).  Since your T300 probably does not have a floppy drive, you will need to use nLiteOS.com to integrate this driver (text mode) in the middle of 2003.

  If you don't care about the data on the disks and want to destroy any re - install Windows, then use SBUU, but who does not resemble what you're trying to do.

  RAID drivers:

  Use this option if you have a PERC 6/i:

  Use this if you have a SAS 6/iR controller:

• You have disabled most of the Add-ons that I depend on. Now I use Chrome.

  I use some add-ons that you disabled. Like Dashlane, I depended on for many years. Keeps me alone by FF because I use so many sites that require a login. Even if it does not appear as being disabled, it no longer works in goodbye and next and next.

  You may need to update Dashlane. See this recent thread where this has solved the problem: some unattainable version 40.1 Add-ons.

• Problems with Toshiba HDD Recovery

  Hello

  A few days ago, I bought a new Toshiba Satellite notebook, everything was going well until I started to delete or disable the programs that have been added automatically with Windows 7 Home Premium 64 bit on the HARD drive,
  because for me, most of them is really unnecessary and everytime when I checked the Task Manager it had before any process of more than 80.
  If everything seemed great until I rebooted the computer, after that there wasn't one more chance to log in windows, I tried several times, but without effect, even I tried via safe mode.
  It seemed like they were reduced.
  So I decided I will upload I want to install the new Windows 7 different version on the HARD drive, without thinking that he might restart former.
  and the problem started here because the hardware does not recognize the new version of Windows, I have all the drivers, I tried to download and add them, but did not work.
  Even Device Manager does not properly because it does not show same me I have the graphics card ATI, network card...

  I know I reacted stupidly, but is there a possibility that I can reboot, reinstall the old primary windows again, because I didn't erase them or I na not format the HDD but I installed the new version on
  One older so that they are still in place on the HARD drive, but under another brand windows.old.
  I also have on the other HARD drive recovery partition, or it's just better to him distribute service where they can solve the problem.
  If you have any tips or advice please tell me!

  Thanks for your response

  AL

  Oh AL what are you doing man. I mean why do you all this?
  The first step, you must do it with the new device is to check the s manuals and pick up some info about your new product.

  In this manual is clearly described that original recovery image is saved on the HARD drive and very important, is to create recovery DVD that you can use in the case if the HDD recovery procedure will not longer work.

  So what you have now?
  -screwed to the top of operating system
  -Nothing in the hand who can help you with recovery of OS install

  Only thing you can try now is to start HARD drive recovery in the hope that everything will work OK.
  Here the instructions how to do this > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If this does not work, you have a big problem.
  Anyway send comments and let's see what you can do as the next step.

• Not mountable boot volume

  Hi all

  I have this problem since Friday, when my laptop crashed. Says "Unmountable_boot_volume" blue screen of death and refuses to boot windows in any form (safe mode and otherwise). I was stressed out since all my data was on it. However I managed to use a bootable linux cdrom program named knoppix for access and backup my files. When I used the recovery cd, the recovery process stops with an error.

  I checked the net, where people have solved this problem by using a windows xp cd. After following their advice and using chkdsk/r, the process stops and the chkdsk program tells me there are one or more errors that prevent him to fix it. checking further... people have used the fixboot or fixmbr to repair their starting system, this does not work. The program he says even that my hard drive is broken. Oddly enough, my hard drive is still accessible with the cd of linux?

  Then I tried to format it. with format c:... seemed to work ok... no errors and other things. However if I go to the root and the type of the dir command, the compu tells me that there is something wrong with my system files. What is even more strange: AFTER formatting of my readers, readers and their information is still intact with the LINUX cd and fully accessible? !!! Anyone know what to do... im desperate >?

  Thank you

  Benoit

  Post edited by: bwitkamp

  Hello
  Use partition magic or similar software to clean the hard disk, you have very probably a Linux partition on the hard disk that prevents return to work. therefore give you the ok. Back and flop in recovery.

  BTW, you might have used microsofts own downloadable windows XP startup disk in their download section to run again and correct the above error.
  concerning

  Gandalfwhite

• Cannot find the partition recovery on the Satellite A200-1BP

  Hello

  First of all, I have a Vista Home Premium 1BP A200 and I lost the product recovery disc and I want to create one with "Recdisc.exe" product of Toshiba Recovery Disc Creator or Vista.

  They both failed because I didn't get a message "No disk HARD recovery Area!", then I looked in the "Disk management" section and could not find any partition without a name.

  There were two primary Partition which were 1.46 GB 'in good condition (EISA Configuration)"and my Vista (c).
  So, what should I do? Can I create a recovery partition?
  Or can I set the Recovery Disc Creator? (v. 5.0.0.5)

  PS: I got my computer several times with my CD, which probably used my recovery partition.
  Seriously, I'm out of ideas and I don't want to lose 50 dollars just to get another copy of disc PR.

  PS2: I used press '0' and 'F8' thing too, they no longer work.
  Is there a way I can restore without any disk?

  Post edited by: darthbabam12

  > There are two primary Partition which were 1.46 GB 'in good condition (EISA Configuration)"and my Vista (c).
  > So what do I do? Can I create a recovery partition?
  > Where can I solve the Recovery Disc Creator? (v. 5.0.0.5)

  It seems that the recovery of HARD drive partition is missing
  The first 1.46 GB partition is automatically created by Vista and the C partition is the system partition, the partition of HARD drive recovery doesn't seem to be available

  > PS: I got my computer several times with my CD, which probably used my recovery partition.
  Retrieve you the Vista using the recovery disc or what drive did you use?

  If you have installed the system using Microsoft Vista disk then, it was a big mistake because it deleted the partition of HARD drive

  > Is there a way I can restore without any disk?
  Either you use a Vista MS disk and missing drivers, which you can download from the Toshiba page or you order the Toshiba Recovery disk don't see another solution

• Y50 - 70 touch only charges when turned off

  My Y50-70 will only touch and detect the power adapter when it is stopped. When on and running, he acts as the power adapter is not plugged at all. When shut down, it charges the battery and the light indicates its charge but when its on and running it does not detect the power cable at all. I just wanted to know where begin to solve the problem. Its executing 10 windows, was 8.1 Windows

  The PSU was the problem, just in case someone already has this problem!

• Problem of lack of resources for IEEE 1394

  We currently have a CVS-1454 with two cameras inspections.  Due to circumstances with the inspection and machine, we try to move the inspections to the computer that communicates with the RESUME.  We get the error "the IEEE 1394 camera could not be initialized because of the lack of resources on the IEEE-1394 bus".  This error occurs only in Vision Builder.  This is not the case in MAX.

  The specific features of the system are: the PC is under XP SP3 with a card PCI-8252.  There are two cameras from Basler scA1390-17fm of the inspection.  The cameras are using the 7 Format, Mode 0, 1392 x 1040.  The PCI card is new out of the box, the cameras are a couple of years.  VBAI version 3.5, LabView 8.6, MAX is version 4.6.2.

  I found the articles on NI.com addressing this issue, but the recommendations have had no effect.

  1. Package size & framerate: in MAX speed can be set on a 100Mbs.  Reduce the size of the package has no effect.  It has been set to the default value to 1024, but we lowered it to 200 without effect.
  2. We installed the driver of Bus AVT Package, but when we went to the driver of the TRA, the bus went to the MAX and then Windows through the new hardware wizard found and we couldn't get the cameras is displayed correctly in the Windows Device Manager, nor did they ever appear in MAX.  All of the documentation I've seen looks that we should not need to install additional drivers for the Basler cameras.
  3. The machine does not have hotfix 885222 installed, but I contemplated trying to run this update anyway: http://support.microsoft.com/kb/955408
  4. Alternate video modes: we have tried to put the cameras to any other video mode.  We can put a camera in an incredibly small resolution, but then the camera still does not work regardless of the video mode.

  I hope that I put all the details there.  Any thoughts?  Should we need to install anything else after the passage in the AVT bus driver?  I was full of hope that would solve the problem.

  Thank you

  Paul

  I agree with Brad, your question is probably the famous issue of Microsoft that XP SP2 and SP3 downgraded a potential to S100 speed, requiring to be restore the driver 1394 SP1 of Microsoft, or switch to Win7 where they finally solved the problem.

  Or by using a substitute 1394 Microsoft compatible spare driver, such as the one offered by AVT.

  But I differ respectfully with Brad that re. If the driver AVT 'worked right' or not... as it was only designed to work with AVT cameras - and will not work with Basler cameras.  This is a deliberate design feature.  Or constraint,'s point of view.  ;-)

  Scott

• You must activate today

  I have an oem product which is a hp pavilion dv9000 series laptop computer entertainment. I use vista and win7 on this computer that is configured to dual boot. I decided to start the installation of vista and once I was in I was asked then to activate my product. I might add that I had not used the product Vista for about two weeks and that this problem had occurred once before.  After talking to hp support technician, I was told to reinstall my operating system. My question is this, what could be causing this to? I had never had this problem before my two os on this computer. When I decide to try to activate, I received a message that read the product key you entered is not valid, come on... This is an OEM installation. My computer skills are good enough to where I can solve most of the problems, I had to deal with. Now, that being said, maybe you can explain to me what is causing this glitch before I reinstall my os. Most computers weather, it is an OEM product or one that was bought as a project at home using a purchased Windows installation disc, must be able to endure a time of system dual boot using cmd promt to configure the boot order or a third-party boot order design like Acronis without having this type of problem. Thank you for your help in this matter.

  Donald Jones,

  I get their hands on Microsoft the first time I had the problem, and their comeback was that some the same as yours except they said that HP had to help me it was an oem product and it was out of their hands. I say this, hp told me to reinstall my operating system which has worked so far. What he has done by reinstalling the system was reactivated as if it was installed for the first time. In any case, thanks for your comments.

• How to find a line number in excel

  Hello

  I need help to find line number in excel.

  Actually what I try to do is, I use the scanner to read the barcode (string) then I need to search for the same string in the excel file (my datas are recorded as like this for ex: in line 5, column 1 I have to chain column 2 column 10 (West) I have certain values). Now when my string corresponds to the West his will display values from column 2 to 10, so I have to find which line matched the West channel number.

  Thank you

  The search through the forums helps a lot. Here is a discussion where I've solved your problem.

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=200494&jump=true

  For more information and some samples VI and tool kits, you can go to the excel Council