ISO10 updated not able to update the apps or open applications

Similar Questions

• For 2 days were not able to access the App Store and regular a few adds on my iPad, but can be downloaded on my iPhone. I have reset the router, iPads, etc... No change. Help, please

  I can't access AppStore and some other operations ordinary adds on my iPad. Have reset and all routers. All updates current. I can do on iPhone. Is it me or Apple or what? Help, please

  Hello there jacquelinefrombburg,

  Welcome to the communities of Apple Support! It is a great place to get help with connection problems to the App Store and access other applications on your iPad. I know that there are some applications that I rely on every day, so I'll do my utmost to help find a solution.

  As point of departure, we will you force him to close all open applications on your iPad. Once you've done that, go ahead and reboot your iPad. Once it is up and running, test on the App Store to see if you are able to access. Here are some useful resources to guide you through the process described above:

  Force a nearby application on your iPhone, iPad or iPod touch

  Restart your iPhone, iPad or iPod touch

  If you still have questions, see the steps in this article. Even though the title says iTunes Store, the recommendations would still apply to the App Store.

  If you cannot connect to the iTunes Store

  As a step in isolation, it would be wise to check if you have problems with the App Store and other applications while using a Wi - Fi connection and cell phone. If the problem persists with the two types of connection, try resetting the network settings on your iPad. Please note that you erase all the stored passwords and Wi - Fi networks. To complete this step, go to settings > general > reset > reset network settings. After you restart your iPad, test the apps again.

  Take care!

• Hi all, my iBook app keep leave after a few minutes, I opened the application. Can anyone help? Thank you very much. I was not able to remove the app I guess it comes with the iPad device.

  Pre-installation iBook app keep quit

  Hey DarkKnight @.

  Try this:

  1. Quit all applications: Double click on the Home button and the sliding of the application for each open application preview page
  2. Force reboot: press and hold the sleep/wake and Home buttons and do not let go until the screen darkens and the Apple logo appears

• I'm not able to delete an app from the iphone

  I have an ipad mini retina display

  Question:

  I had installed citrix worx home app

  Then I removed the profile parameter > xenmobile device mgmt. etc.

  But now, I'm not able to remove the app in spite of showing the wobbling x' when I remove it gives pop up to confirm the deletion

  Yet the app does not remove

  There is no restriction on delete app

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo.

  It may take 30 seconds

  See you soon

  Brian

• Not able to install the application, asking family SMEs of installation

  Original title: iam not able to install the app it ask family SMEs of installation

  IAM able to install apps it ask some family configuration

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  1. What you are trying to install applications?
  2. You are the administrator of your computer?

  You can set up a family safety account or you may be referred by the primary user. For the children of family security controlled, if game Restrictions are lit, depending on the setting you have (lower than 10, teen, mature etc), your child will be able to download applications that meet the coast.

  Here's what I suggest, if you wish to:

  1. Go to https://familysafety.microsoft.com and login as parent
  2. Check the setting of the game.

  You can do two things

  • Put out of the game restrictions or
  • Change the restriction of adult game

  Once your child has downloaded the application, parent go back to the family site, turn on the Restriction of game or set the game side to one appropriate for your child.

  For more information:

  Use security for the family with the Windows store

  Also, in the list of game for your childs account, make sure that the app is in the whitelist if your username already has but gets blocked by parental control due to permissions issue.

  Let us know if you need more assistance. We will be happy to help you.

  ________________

  Thank you best regards &,.

  Isha Soni

• Not able to see the list of applications for Plan when click on browse-> applications

  Hello
  
  Somehow, I am not able to see the list of planning applications by clicking Navigate-> Applications-> planning of the workspace in planning 9.3.1. Is there an Internet settings I need to change to see the list of applications. It seems that there is something off in my internet options or preferences.
  
  Could someone please help?
  
  Thank you.

  Hello

  It's just you that has this problem.
  You use IE7, if so
  Tools-> Internet Options-> Security-> Custom Level-> windows Allow initiated by scripts without size or position constraints

  Otherwise, it could be that you did not have access.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I forgot to package ID, not able to update the app World! Help, please

  Hi guys,.

  As the title says, I forgot the package ID, and I'm not able to update the app World! whenever I submit a press release I get an error indicating that the package what ID does not match. Please suggest me what I can do? How to find the package id? Thank you very much. See you soon.

  Goto the BB forum and ask the question. BB has the ability for you to create a new token of dev and map it to the original. I had to do this recently. MShom was the one who did it for me.

• Brand new Veer does not update the app Catalog or something else

  Hello

  Got a new at & t Veer (it was already unlocked), after have logged you in my existing profile, the phone came, but the App Catalog, has not been able to update itself as well as other applications.  Some of the suggestions in the forum to change the date to July 1 and force the update via the App Catalog, but it did not.  Clear and reset the phone, still didn't work.

  WEBosdoctor'ed the phone and it still has not installed the update (failed).

  Call in the experts to see if there are any other technique not too complicated to solve the problem.  WebOS is 2.1.2.

  I have seen one that required some hacking of level intermediate directories for reset the certificate, but a bit too risky for my basic skill level.

  Thank you!

  After scouring the forums looking for similar problems, I put on one track
  what I was living for:
  - http://forums.webosnation.com/hp-touchpad/325422-app-catalog-certificate-update-failed-2.html
  
  Thanks to the efforts of SideshowBob84, we have a solution to this problem.
  
  Despite the solution published HP to change the system date to 1 July 2013 and
  Download the update from the App catalog and install it, it still doesn't work.  It may have previously
  worked, as others have pointed out, however, since September, it appears something has
  changed and this solution is no longer valid.  Perhaps the server certificate has been
  compromised regarding WebOS and not corrected since.  HP may not be up-to-date
  of the problem.
  
  However clever mind in the WebOS community have a solution.
  
  When an update or installation of the App Catalog is requested, that a ".ipk" is downloaded.
  and then installed on your device, then the international prototype of the kilogram is deleted in your download folder.
  Very clean and hygienic when it works correctly.  When it's not as here all the
  evidence is erased, and we do not know what happened.
  
  GMMan, created a process and a patch that comes in the installation process and
  keeps ipk so that it can be installed by PreWare.  In this case, we want to download the
  Update Catalog App, but when he moved, we use PreWare to the action.  Times
  the update has been installed, you should be able to use the App Catalog without
  incident.  The following link leads to the solution of GMMan:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  Its a bit technical and a white knuckler couldn't for some.
  
  I'm not a neophyte, but I don't know where near technical competence are the guru.
  But I'll try and simplify the process in an easy to understand the document.  Before entering
  started, here is an inventory of the software solutions you need:
  
  Also when you download these solutions, remember to give what you can!
  These people put out there for the benefit of all.
  
  WebOSDoctor - this tool will reset your Veer to the conditions of the factory, he must get
  messed up.  An indispensable tool for any owner of WebOS.
  - http://www.webos-internals.org/wiki/WebOS_Doctor_Versions
  
  WebOSQuickInstall (WOSQI) - Gift of Jason Robitaille to the WebOS community for
  install PreWare, Homebrew applications and patches on WebOS devices.
  Absolutely essential and easy to use.
  - http://forums.webosnation.com/canuck-coding/274461-webos-quick-install-v4-5-0-a.html
  
  PreWare and Internalz Pro - Tools used for research of the ipk and patches loaded on
  a device.  PreWare will apply the patches on your device.  No need to download
  as WOSQI can find these ipk for you and install them.
  
  NODELETEIPK. PATCH - this patch when applied to your device will be downloaded
  the IPK is not deleted if they are properly installed.  Note: when this
  patch is applied all downloaded ipk is kept, you should not use Internalz Pro
  delete installed and no more need ipk.  A small price to pay to get your App
  Catalogue working again.
  A link to download NODELETEIPK. PATCH is found in this thread:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  
  Java 1.6 - minimum for WOSQI to work.
  In your search engine, search for 'Java 1.6' or 'Java 1.6 jre"to download Java
  the Oracle company.
  
  Your PC or laptop - WOSQI works on Windows, Linux and Mac.  I personally found
  that it does not work on PowerPC Mac, it's that you can't get Java 1.6 for these computers.
  And on PC Windows 8.1, I don't think that pilots Novacomd works on this version.
  
  -----------------------
  
  Now, the real work begins.
  
  1. install Java on your workstation.
  
  2. If your Veer is messed up, restore it back to factory using WebOSDoctor condition.  Good
  on screen instructions.
  
  3. launch your device and complete the activation and the Palm profile process.
  The AppCatalog update will fail, but it's OK, we'll fix it later.
  Once your device is running, put in Developer Mode.  To make this entry
  the Konami code on the home screen.
  Type the code as shown: "upupdowndownleftrightleftrightbastart". It's a bit geeky,
  but it works.
  Alternatively, you can type in, "webos20090606".
  You'll be put in the screen in developer mode, slide the switch to on to activate
  Developer mode.
  You can disable it later once you have applied the update to the App catalog,
  using the same codes.
  
  4. start WebOSQuickInstall (webosquickinstall.jar).
  
  5. attach your device to your workstation.  Once the workstation is aware of your
  device WOSQI will also recognize your device. You should see the name of
  your device in a drop-down list in the WOSQI.  Your device will also ask you
  If you want to connect with a USB device or charge your device.
  Select, load your device.
  
  6. There will be an icon on the right side of the WOSQI window that looks to the world
  attached to a hose.  Click on this icon and it will open a new window with
  several tabs.  Click the Applications tab if it is not already active.
  Search for Preware and Internalz Pro.  Install these two ipks.
  When these ipks are being installed, it might want to install other required
  packages.  Allow installation of other packages.  Once completed,
  Close the window and you will be current with the main window.
  
  7. now, look for an icon to sign more.  Click on it and it will open a finder window.
  Locate the NODELETEIPK. PATCH file that you downloaded previously.
  Let WOSQI install and apply the patch.  After that WOSQI applied the patch,
  the sheer can restarted.  YMMV.
  Then, for the update, set the date of your system on July 1, 2013
  via the application Date and hour.
  
  8. you are now finished with the steps in the workstation.  Remember to well to eject the
  device before you disconnect it from the computer.
  
  9. When you look at the menu of your device, you should see PreWare and Internalz Pro.
  
  10. then open the App Catalog.  Search for 'App Catalog Update.  Install the
  Update. It will probably fail, and it's OK.
  
  11. open Internalz Pro and navigate to the following folder location,.
  / Media/Internal/downloads.  You will probably see a called ipk,
  com Palm.app.appcatalogupdate_2.0.0.IPK.  Open the ipk.
  When you open this ipk, it automatically calls Preware
  to install the ipk.  When this is done, the App Catalog should be
  fully functional.  A restart of the swing may be required.
  
  12. reset the date system is automatic.  You should now be able to download
  the App Catalog programs.
  
  13. Notes, with the patch in place, you need to occasionally clean the download
  folder for managing storage.
  
  14. you're now back to a functional State of WebOS!
  
  15. you can uninstall the NODELETEIPK. Your device to help PATCH
  WOSQI, using tool/Device Management.  I had not done that, so if you are
  success, let us know!

• Windows 8 app Store could not update the app with error code 0 x 80070057

  Hello

  I have an application that I downloaded from the App Store of Windows 8 (RTM version), who has recently had an update, but Windows Store could not be updated and returned the error code 80070057 0 x.  But after the update failed, Windows Store still lists old as installed APP and calls the updated application.  I tried reapplying the update but it keeps fails with the error 0 x 80070057.  I tried to look for ways to uninstall it, but the Live tile has been removed from the home screen (not listed under all the Apps either), so there is no way to uninstall it.  Now I'm stuck with Windows Store perpetually asking the updated application.
  Does anyone know how to uninstall a Windows 8 application without the Live tile?  Thank you.

  Open Explorer and in the navigation bar, type \AppDatausernamec:\users\

  Replace username with your actual user name, for example c:\users\debbie\appdata

  It is a hidden folder, you cannot display it by default unless you authorize the display of hidden folders.

• SECURITY UPDATE for SQL SERVER 2005 SERVICE PAK (KB970892) FAILURE CODE 7358__I am not able to complete the update above.

  UPDATE OF SECURITY FOR SQL SERVER 2005 SERVICE PAK (KB970892) HAS NO CODE 7358
  WINDOWS _00007358 WINDOWS UPDATE _dt000 UPDATE

  I'm not able to finish the update above.  When I try to turn off my cell phone, that the process is delayed because the computer tries to update and it is frustrating to wait the update complete error 7358.

  Can it be fixed or can I delte this update to stop the delay to stop him?

  See the section "How to get help" of http://support.microsoft.com/kb/970892

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Security customer includes home links page free security update support, too
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I was not able to download the updates of Windows XP

  I have a dell machine running xp / sp3 who has started having failures to download or install updates may 9.  Since then he has not installed updates even if it is set to do so all night at 04:00.  It is also doing the same thing on the other computer desk in the small office LAN we have running off a verizon for DSL router.  Chess began the same night, May 9.  Here to install updates from the windows update page also failed.  I ran the utility 'Difficulty now' from microsoft, and it has not fixed the problem.

  Thanks in advance for your help to solve this problem.

  Original title: I was not able to download the updates of Windows XP since May 9. Downloads keep failing.

  If you have been playing around with the settings, you'd be wise to resinstall.  All that are "machine accounts" which are automatically defined by the system to the evolution of random passwords.  If you have accounts of changes of ntauthority to other accounts, you perhaps weakened the security level of the operating system.

  No it's not a portal, that even Microsoft doesn't know what are these passwords.

• I was not able to receive the Windows Update since February 2012. I have a Code error 80070005.

  Error code 80070005

  I was not able to receive the Windows Update since February 2012. I have a Code error 80070005. What can I do to fix this?

  Hello

  Have you made changes on the computer before this problem?

  
  Try the following Microsoft article and see if it helps.
  
   
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.Microsoft.com/kb/968003 
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• My computer (windows vista) is not able to check the updates of windows, anyone able to help?

  My computer (windows vista) is not able to check the updates of windows, anyone able to help?  I get the following error message

  Hello

  What error message?

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum, INCLUDING the error message

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem

  Hi people

  I'm on Windows 8, and in these last days, I get this message

  " " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"

  It is on a blue banner that goes directly to the screen and it is very annoying

  I get updates through so I do not understand this

  Any help would be great

  PS I have tryied the restoration of the system, and it's always the same

  Lee was soon

  Original title: looking for some help please

  Hi Lee,.

  I had this same problem and it drove me crazy, but I solved it.

  I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.

  below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)

• Not able to check the recent updates

  Not able to check the recent updates

           Whenever I check updates or windows automatically checks the center of new updates, I get a message from the action saying Windows failed to check the latest updates and Windows Update has encountered a problem. What should I do to fix this? I am running Windows 8 unique language.

  Hello

  You can try this method and see if it helps you:
  http://www.kapilarya.com/fix-Windows-8-1-Unable-to-check-for-new-Windows-updates
  Hope this helps, good luck :)