Simulators of the device does not

Similar Questions

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Hello

  I will need to know the brand and model of the device in order to help you solve it.

  You see the device listed in the Control Panel, hardware and sound, scanners and cameras?
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The device does not seem to be pluged?

  Please which hat an en ansewr this

  When I used the Microsoft fix it I get this answer "the device does not appear to be pluged?

  Hi ArtanLala,

  1 are you facing sound problems?

  2 what Microsoft Fixit did you run?

  3. using external speakers?

  If you are facing problems with the sound, you can check with headphones and see if the sound works fine.

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• The device does not appear in the menu generator of folio

  Hello

  I use a new Samsung Galaxy Note 10.1 (2014 edition). The device does not appear in the menu designer folio when I try to do a test. You have an idea?

  My computer: MAC OS 10.8.5 with InDesign CS6 8.0.2

  Samsung Galaxy Note Note 10.1 2014 edition, 4.3 Android

  Thank you

  (You can answer in french or English)

  Thank you Bob for you answers.

  My problem is solved.

  The advanced options menu is hidden on the new tablets Galaxy Note 10.1.

  To bring up this menu go to the menu "about the device" and press the number of the model 7 times.

  The advanced options menu appears. In this menu, you need to turn on USB debugging.

  Fact.

• dose of the device does not react to the C++ code

  Hello.

  I have meassuring keithley 237 system, connected to the port COM4.

  And I commands manual keithley insturment.

  When I use assistant LabView Instrument IO and put in "query and analyze" the steps of these commands, the device reacts as it should.

  But when I try to write and run my own C++ code, device does not react.

  just no reaction at all!

  Maybe someone can help me and tell me what's missing.

  Here's my C++ code:

  #include #include "visa.h"
  
  using namespace std;int main (int argc, char *argv[]){       ViStatus status;    ViSession defaultRM, instr;    /* Open Default RM */    status = viOpenDefaultRM(&defaultRM);
  
      if (status != VI_SUCCESS) {        /* Error Initializing VISA...exiting */             return -1;        }
  
      /* Access other resources */    status = viOpen(defaultRM, "ASRL4::INSTR", VI_NULL, VI_NULL, &instr);
  
      // here I send commands to device    viPrintf(defaultRM, "F1,0X");           //  "F1,0X" and all another symbols in "" are just commands from keithley manual.          viPrintf(defaultRM, "B1E-6,0,X");    viPrintf(defaultRM, "L11,0X");    viPrintf(defaultRM, "P3X");    viPrintf(defaultRM, "O0X");    viPrintf(defaultRM, "N1X");    viPrintf(defaultRM, "H0X");
  
      viClose(instr);    viClose(defaultRM);
  
  return 0;}
  

  Hello

  There is an obvious problem in your code: viPrintf () accepts as a first parameter a session handle, which is "instr" variable returned by viOpen () in your case. Using the default resource manager leads to incorrect results (BTW, you must add to your code an error checking: I expect viPrintf () to return VI_ERROR_INV_OBJECT or similar error).

  As long as an additional indicator, I noticed that you use no termination for your messages: you should check in the documentation for the device if you need to add a stop character (the instruments most want a '\r' or '\r\n' sequence at the end of the messages to accept).

• Why the device does not recognize QR codes?

  Why the Apple device on the products Apple (iPhone, iPad...) does not recognize QR codes?

  You need an application, like the QR reader

  https://iTunes.Apple.com/app/QR-reader-for-iPhone/id368494609

• Windows vista Manager or the device does not recognize the cd/dvd drive

  I have windows vista and it is not recognize my cd/dvd drive. When I click on my local drive (c :)) and recovery hp (d) shows up, I checked my device manager and nothing shows here either for my cd/dvd drive, so I checked the cable but it looks fine.) checked the files of the upper and lower register, but that fact so I just bought a dvd burner external made by polaroid that is USB2.0 and supposed to be plug-and-play, but when I connect it nothing happens nothing. the power turns on two cd players and the disc starts to spin but it stops after 15 seconds and I get nothing. I am confused and don't know what to try. Please help thanks. so I tried to use the running microsoft dvd set and the message I said 'dvd cd drive not detected '.

  I tried these steps with no luck

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hello mike salinas.

  1. you have any third-party burning software installed on your computer?

  2. have you checked if the external CD drive works on another computer?

  I suggest that you check if your internal CD-ROM drive is detected in the BIOS.

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer, but before I get to the BIOS to start Windows. Check to see if there is the CD/DVD drive in the BIOS.

  You can see the article for more information about the BIOS:

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Regarding the external CD/DVD drive, I suggest you see if it works on another computer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Safely remove the device does not respond

  I've recently updated my laptop operating system to Windows 7. When I upgraded first, it worked normally. But recently I realized that when I click the icon remove the device safely to remove my thumbdrive, it does not for me already. I tried to right click, but nothing happens.

  Please help me! Thanks and appreciate your help!

  Have you checked in the Device Manager for the yellow or red flags on the USB controllers? If found, remove items and restart.

• Safely remove the device does not work.

  I would like to know if someone has problems with delete material it and eject the media safely? When when I move the mouse over the icon it reads safely remove hardware and eject the media, but when I click the icon, nothing happens. I don't want to corrupt my external hard drive by pulling out the plug. Any ideas?

  If you're not pushing the drive for all the possible performance it can give, you can disable the write cache and you won't need to use 'remove hardware safely' after it.  To change it, open Device Manager and expand the section hard drives.  Find the drive click the right button and select "Properties".  Under the "policies" tab, you will see two choices - 'quick release' and 'best performance' - with explanations for each.  As you will see in the explanations, if you select "quick withdrawal" you can simply disconnect the device at any time without going through the routine 'remove hardware safely '.

  Thank you
  Renjith

• BrowserPlugin works Simulator, but the device does not recognize the mime type

  Hello world

  Use the BrowserPlugin class in JDE samples, I was able to record a personalized with my BlackBerry mime type. When the browser makes a redirect to a specific page with the mimetype, the browser will recognize and use getBrowserContent() to move my application to the foreground, above the BlackBerry browser.

  I have this working on the Simulator, but on the device, I get the message: "unable to display the selected item. You want to save the item? »

  When I click 'No', I get the message: "Unsupported media type: application/x-vnd.rim.xxxtest.

  Like I said before, it works on the Simulator. I supported by the web server mime type, and I created a library project that will run at startup that will record the mime with the device type.

  I've debugged on my real device and confirmed that my library project is actually the launch...

  Someone know why this might work on the Simulator, but not on the device?

  Ah,.

  I'm embarrassed. I had unconsciously assume that when I used Javaloader to load my application to my phone that it would also include the referenced library projects... I was wrong!

  I loaded the library project separately and it works very well.

• I have my iphone connected to my computer with a USB cable, but the device does not appear in my computer folder

  I am trying to transfer photos from my iphone 4S on my laptop, and to do that I need my iphone appears on my computer under Devices folder. even if I connected it to my laptop with a USB cord it still does not appear under removable devices under my computer folder

  It's my understanding that Apple does not allow this.  I can be updated on that.

• Add to that a window of the device does not open

  all the instructions say to click on 'Add a device' and 'add a device' window will open. No matter how I navigate, click on open Web site page on how to add a device NOT an extra one window unit. Here's a URL https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync#os=android & browser = m5.
  Please help me out of this closed loop - i've got 7 How to add a device pages Web open now!

  You seem to be running firefox v3.6.18. If this is the case, Sync must be installed via an add-on that is this one: https://addons.mozilla.org/en-US/firefox/addon/firefox-sync/

  The instructions that you are referring to them are related to the built-in synchronization utility which is part of Firefox 5.0.x and may differ from those of the add-on.

  If you want to stick with the one you have, then contact the developer for advice, email on the above site link. Otherwise, update 5.0.1 by clicking help | Check For Updates , after which, you can use the instructions that you have already linked to.

• Send the Page to the device does not work in Firefox 29

  I got the tab send to add-on device installed for Firefox 4, look forward to the day that he would be included in synchronization. He had always worked for me until I upgraded to Firefox 29. Now, when I right click and select "send this page to device...". "in the context menu, an alert box tells me, 'you must configure Firefox Sync. "I have already set up my Firefox and signed account on all of my devices. In the past, this has happened on rare occasions, and I fixed it by clicking "Synchronize now" in the main menu. This option is no longer available. Please notify.

  Yes, there are two that I know.

  1. Open the menu history
  2. Select the tabs to other devices

  or

  1. Go to the url of the page: subject: sync-tabs
  2. Look for your tabs here